Chemisorption of 1,1-dichloroethene on the Si(1 1 1)-7 × 7 surface

Chemisorption of 1,1-dichloroethene (Cl₂CCH₂) to a Si(1 1 1)-7 × 7 surface was studied by means of X-ray photoelectron spectroscopy using synchrotron radiation, recording chlorine 2p and carbon 1s spectra. For carbon 1s, spectral assignment of the chemisorbed species is based on quantum chemical calculations of chemical shifts in model compounds.The results confirm the identity of covalently bonded 1-chlorovinyl (-CClCH₂) and vinylidene (CCH₂) adspecies. Upon chemisorption at room temperature it was found that about one-third of the molecules break one C-Cl bond while about two-thirds of the adsorbates break two C-Cl bonds. We do not, however, find evidence for isomerization of CCH₂ to di-bonded vinylene (-CHCH-).     

Conformational isomers of stilbene on Si(1 0 0)

Stilbene (1,2-diphenylethylene) has shown an intriguing isomerisation behavior and may serve as a model system for “molecular switches” incorporating a CC double bond. To evaluate the possible use of such molecules as molecular switches on semiconductor surfaces, the adsorption of cis- and trans-stilbene on Si(1 0 0) has been investigated. Identification of both isomers is achieved by differences in adsorption geometry as revealed by NEXAFS, and differences in electronic structure in the occupied and unoccupied molecular orbitals. For both isomers, bonding takes place via the CC double bond to the Si dimer atoms allowing for free movement of the aromatic rings, a necessary prerequisite for photoinduced isomerisation on the surface. Our experimental results agree well with theoretical calculations.     

Reaction of acetonitrile with the silicon(0 0 1) surface: A combined XPS and FTIR study

The adsorption of acetonitrile on the Si(0 0 1) surface has been investigated using X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR). XPS and FTIR spectra indicate that adsorbed acetonitrile forms two correlated binding configurations, a CN species with a strong FTIR absorption at 1540 cm⁻¹ and a CCN (ketenimine) species that has a very strong FTIR absorption at 1952 cm⁻¹. The CCN FTIR peak at 1952 cm⁻¹ shows a striking polarization dependence, with the infrared transition dipole almost entirely in the plane of the sample and parallel to the SiSi dimer axis. Our data suggests that the primary CCN structure results from cleavage of two C-H bonds, forming a structure in which the N and terminal C atom are both linked to the surface. Temperature-dependent experiments help to elucidate the complicated reaction mechanism for acetonitrile adsorbing onto the Si(0 0 1) surface. Dosing at higher temperature increases the amount of CCN relative to CN species while heating leads to direct transformation of the CN to the CCN species. Our results indicate that previous studies, which considered only products formed by cleavage of a single C-H bond, have misidentified the primary ketenimine product. A reinterpretation of the earlier results, combined with data presented here, sheds new light onto the products and mechanism of interaction of acetonitrile with Si(0 0 1).     

FTIR spectra and rovibrational analysis of the ν11 band of trans-ClHCCHF and ν10 of trans-ClHCCDF

High-resolution Fourier transform infrared spectra of natural trans-ClHCCHF and of its isotopologue trans-ClHCCDF have been recorded in the region between 700 and 1150 cm⁻¹ with the purpose to analyze the ν₁₁ fundamental of the main species and the ν₁₀ of its deuterated compound. Both bands, of symmetry species A″, present c-type envelope absorptions. Beside the expected features, the K structure of the P(J), Q(J), and R(J) manifolds was resolved and identified; the assignment of the rovibrational transitions was extended up to J = 92 and K_a = 13 for the trans-³⁵ClHCCHF and up to J = 86 and K_a = 10 for trans-³⁵ClHCCDF. More than 2900 and 2700 lines for the main and deuterated species, respectively, were analyzed by a least-squares procedure and reliable spectroscopic molecular parameters were determined for both isotopologues.     

Chlorine nuclear quadrupole coupling in chlorodifluoroacetyl chloride: Theory and experiment

A potential energy scan of chlorodifluoroacetyl chloride, CF₂ClC(O)Cl, at the MP2/6-311+G(d) level of theory predicts stable gauche and trans conformers, with E_gauche<E_trans. Ab initio calculations were made of approximate equilibrium structures of these and, on these structures, calculations were made of ³⁵Cl and ³⁷Cl nuclear quadrupole coupling constant tensors. Coupling constants here predicted, as well as rotational constants and molecular dipole moments, are applied to aid analyses of experimental microwave spectra. Chirped pulse Fourier transform microwave spectroscopy has been used to rapidly record the rotational spectra of four isotopologues of the title molecule, CClF₂C(O)Cl, namely ³⁵Cl³⁵Cl, ³⁵Cl³⁷Cl, ³⁷Cl³⁵Cl, and ³⁷Cl³⁷Cl. Only the gauche conformer was observed under the experimental conditions. For the four isotopologues a total of 464, 219, 197, and 77 transitions have been recorded, respectively. With the exception of the ³⁷Cl³⁷Cl isotopologue sufficient data was available to determine all Cl quadrupole coupling tensors. Comparisons between the theoretical and experimental results are made.     

Quantum chemical molecular dynamical investigation of alkyl nitrite photo-dissociated on copper surfaces

An accelerated quantum chemical molecular dynamical code “Colors-Excite” was used to investigate the photolysis of alkyl nitrites series, RONO (RCH₃ and C(CH₃)₃) on copper surfaces. Our calculations showed that the photo-dissociated processes are associated with the alkyl substituents of RONO when adsorbed on copper surfaces. For RCH₃, a two-step photolysis reaction occurred, yielding diverse intermediate products including RO radical, NO, and HNO, consistent with those reported in gas phase. While for RC(CH₃)₃, only one-step photolysis reaction occurred and gave intermediate products of RO radical and NO. Consequently, pure RO species were achieved to adsorb on metal surfaces by removing the NO species in photolysis reaction. The detailed photo-dissociated behaviors of RONO on copper surfaces with different alkyl substituents which are uncovered by the present simulation can be extended to explain the diverse dissociative mechanism experimentally observed. The quantum chemical molecular dynamical code “Colors-Excite” is proved to be highly applicable to the photo-dissociations on metal surfaces.     

Anharmonic force field and equilibrium structure of nitric acid

The quadratic, cubic and semi-diagonal quartic force field of nitric acid has been calculated at the CCSD(T) level of theory employing a basis set of triple-ζ quality. A semi-experimental equilibrium structure has been derived from experimental ground state rotational constants and rovibrational interaction parameters calculated from the ab initio force field. It is found that the A and B semi-experimental equilibrium rotational constants of the ¹⁸O isotopologues (for which the rotation of principal axes is large) cannot be accurately reproduced. This problem is discussed and a remedy is proposed. Finally, the semi-experimental structure is in agreement with the ab initio structure calculated at the CCSD(T) level of theory using a basis set of at least quadruple-ζ quality and a core correlation correction, except for the long NO single bond for which the CCSD(T) value is too short due to inadequate treatment of electron correlation. The empirical structures are also determined and their accuracy is discussed. The best equilibrium structure is: r_e(NO_syn) = 1.209(1) Å, r_e(NO_anti) = 1.194(1) Å, r_e(NO) = 1.397(1) Å, r_e(OH) = 0.968(1) Å, ∠(ONO_syn) = 115.8(1)°, ∠(ONO_anti) = 114.2(1)° and ∠(NOH) = 102.2(1)°.     

Selective surface chemistry of allyl alcohol and allyl aldehyde on Si(1 0 0)2×1: Competition of [2 + 2] CC cycloaddition with O-H dissociation and with [2 + 2] CO cycloaddition in bifunctional molecules

Competition between the CC functional group with the OH group in allyl alcohol and with the CO group in allyl aldehyde in the adsorption and thermal chemistry on Si(1 0 0)2×1 has been studied by X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption (TPD), as well as density-functional theory (DFT) calculations. The similarities found in the C 1s and O 1s spectra for both molecules indicate that the O-H dissociation product for allyl alcohol and [2 + 2] CO cycloaddition product for allyl aldehyde are preferred over the corresponding [2 + 2] CC cycloaddition products. Temperature-dependent XPS and TPD studies further show that thermal evolution of these molecules gives rise to the formation of ethylene, acetylene, and propene on Si(1 0 0)2×1, with additional CO evolution only from allyl alcohol. The formation of these desorption products also supports that the [2 + 2] CC cycloaddition reaction does not occur. In addition, the formation of SiC at 1090 K is observed for both allyl alcohol and allyl aldehyde. We propose plausible surface-mediated reaction pathways for the formation of these thermal evolution products. The present work illustrates the crucial role of the Si(1 0 0)2×1 surface in selective reactions of the Si dimers with the O−H group in allyl alcohol and with the CO group in allyl aldehyde over the CC functional group common to both molecules.     

Effects of NH3, O2, and N2 co-implantation on Cu out-diffusion and antimicrobial properties of copper plasma-implanted polyethylene

Metal antibacterial reagents are effective in the enhancement of the antimicrobial properties of medical polymers. However, incorporation of metal antibacterial reagents into polymers using conventional methods usually results in unstable antimicrobial effects. Our previous research demonstrates that plasma immersion ion implantation (PIII) can be used to effectively incorporate metal antibacterial reagents such as Cu into polyethylene (PE) in the near surface region up to several hundred nanometers without causing noticeable damage to the polymer matrix. In this work, various gases including NH₃, O₂, and N₂ were plasma-implanted in concert with Cu plasma immersion ion implantation to study the effects of these gas species on the release rate of Cu from the substrate. Our experimental results reveal that the copper depth profiles are not affected significantly by NH₃, O₂, or N₂ co-implantation and these gas elements have similar depth profiles as Cu. Chemical analyses demonstrate that polar functional CO, CO, CN, CN, and CN bonds formed in the substrate play an important role in regulating Cu out-diffusion. Among the three gas species, N₂ shows the best effects in regulating Cu out-diffusion and produces the best long term antibacterial properties. The Cu retention and out-diffusion mechanism in the ion-implanted polyethylene is described.     

Isomeric effects on room-temperature chemisorption and thermal evolution of iso-, cis- and trans-dichloroethylene on Si(1 1 1)7 × 7

The room-temperature adsorption and thermal evolution of iso-, cis- and trans-dichloroethylene (DCE) on Si(1 1 1)7 × 7 have been studied by vibrational electron energy loss spectroscopy and thermal desorption spectrometry (TDS). The presence of the Si-Cl stretch at 510 cm⁻¹ suggests that, upon adsorption, all three isomers dissociate via C-Cl bond breakage on the 7 × 7 surface to form mono-σ bonded chlorovinyl , which could, in the case of iso-DCE, further dechlorinate to vinylidene (:CCH₂) upon insertion into the back-bond. The higher saturation exposure for the Si-Cl stretch at 510 cm⁻¹ observed for cis- and trans-DCE than iso-DCE suggests that Cl dissociation via the CHCl group in the cis and trans isomers is less readily than the CCl₂ group in iso-DCE. Our TDS data show remarkable similarities in both molecular desorption near 360 K and thermal evolution of the respective adstructures for all three isomers on Si(1 1 1)7 × 7. In particular, upon annealing to 450 K, the mono-σ bonded chlorovinyl adspecies is found to further dechlorinate to either vinylene di-σ bonded to the Si surface or acetylene to be released from the surface. Above 580 K, vinylene could also become gaseous acetylene or undergo H abstraction to produce hydrocarbon or SiC fragments. All three DCE isomers also exhibit TDS features attributable to an etching product SiCl₂ at 800-950 K and recombinative desorption products HCl at 700-900 K and H₂ at 650-820 K. The stronger Cl-derived TDS signals and Si-Cl stretch at 510 cm⁻¹ over 450-820 K for trans-DCE than those for cis-DCE indicate stronger dechlorination for trans-DCE than cis-DCE, which could be due to less steric hindrance resulting from the formation of the chlorovinyl adspecies for trans-DCE during the initial adsorption/dechlorination process. Finally, our density functional calculations qualitatively support the thermodynamic feasibility and relative stabilities of the proposed adstructures involving chlorovinyl, vinylidene, and vinylene adspecies.     

First-principle study of extrinsic defects in CuScO2 and CuYO2

Using first-principles methods, we studied the extrinsic defects doping in transparent conducting oxides CuMO₂ (MSc, Y). We chose Be, Mg, Ca, Si, Ge, Sn as extrinsic defects to substitute for M and Cu atoms. By systematically calculating the impurity formation energy and transition energy level, we find that BeCu is the most prominent extrinsic donor and CaM is the prominent extrinsic acceptor. In addition, we find that Mg atom substituting for Sc is the most prominent extrinsic acceptor in CuScO₂. Our calculation results are expected to be a guide for preparing n-type and p-type materials through extrinsic doping in CuMO₂ (MSc,Y).     

S180 cell growth on low ion energy plasma treated TiO2 thin films

X-ray photoelectron spectroscopy (XPS) was used to characterise the effects of low energy (<2 eV) argon ion plasma surface modification of TiO₂ thin films deposited by radio frequency (RF) magnetron sputter system. The low energy argon ion plasma surface modification of TiO₂ in a two-stage hybrid system had increased the proportion of surface states of TiO₂ as Ti³⁺. The proportion of carbon atoms as alcohol/ether (COX) was decreased with increase the RF power and carbon atoms as carbonyl (CO) functionality had increased for low RF power treatment. The proportion of C(O)OX functionality at the surface was decreased at low power and further increase in power has showed an increase in its relive proportion at the surface. The growth of S180 cells was observed and it seems that cells are uniformly spreads on tissue culture polystyrene surface and untreated TiO₂ surfaces whereas small-localised cell free area can be seen on plasma treated TiO₂ surfaces which may be due to decrease in C(O)OX, increase in CO and active sites at the surface. A relatively large variation in the surface functionalities with no change in the surface roughness was achieved by different RF plasma treatments of TiO₂ surface whereas no significant change in S180 cell growth with different plasma treatments. This may be because cell growth on TiO₂ was mainly influenced by nano-surface characteristics of oxide films rather than surface chemistry.     

Modification of wetting properties of CR39 by plasma source ion implantation

Plasma source ion implantation (PSII), a hybrid implantation technique between ion beams and immersion plasmas has been used to modify CR39 surfaces for improved wettability providing both advancing (θ_a) and receding (θ_r) contact angles below 5°. The modifications brought to the polymer surface structure have been characterized by X-ray photoelectron spectroscopy (XPS) and its combination with chemical derivatization (CD-XPS). Oxygen desorption has been observed in spite of the very hydrophilic surfaces. C_1s XPS peak has been displaced toward greater energies, while the opposite has been found for O_1s, both involving new components and strong modifications after ion implantation treatment. Strong evidences about the formation of new chemical functions, like OOH, COOH and CC, have been found and have provided an explanation for the increased wettability.     

Hydrogen related point defects in silicon based layers: Si(·)H and SiOOH

Layers prepared by pulsed TEA CO₂ pulsed laser ablation (PLA) of SiO and SiO₂ targets in helium were exposed to hydrogen and deuterium atmosphere up to several kPa. The deposited layers were investigated by FTIR, EPR and XP spectroscopy. Among various Si species silyl radical Si(·)H (Si(·)D) at 2166 (1568) cm⁻¹—H(I) center—and silyl hydroperoxide SiOOH (SiOOD) at 3587 (2648) cm⁻¹ were identified in FTIR spectra. Chemical pathways for production of these species are discussed. Experimental results are supported by quantum chemical calculations.     

Molecular conformation and electronic properties of protoporphyrin-IX self-assembled monolayers adsorbed on a Pt(1 1 1) surface

Monolayers of protoporphyrin-IX molecules are prepared on a Pt(1 1 1) surface by a self-assembly process in order to manufacture organic devices with controlled electronic properties. Scanning tunnelling microscopy (STM) and two-colour sum-frequency generation (2C-SFG) are performed ex situ in ambient air, in order to characterize their molecular conformation and electronic properties at the monolayer level, respectively. STM measurements performed with functionalized gold tips reveal a high covering rate of the metal surface. 2C-SFG measurements highlight CH stretching modes of vinyl substituted groups (RCHCH₂) in the 2800-3200 cm⁻¹ infrared spectral range and particular electronic features in the visible spectral range, i.e. a Soret band red shift and band separation compared to the liquid phase. Moreover, similar measurements are performed on Zn(II)Protoporphyrin-IX and 5-[p-(6-mercaptohexoxy)-phenyl]-10,15,20-triphenylporphin films for comparison. These results suggest a film conformation with the molecules having different tilt angles with respect to the substrate normal, depending on the ion metal presence or the chain length bonded to the porphyrin moiety.     

A selective [4 + 2]-like cycloaddition of α, β-unsaturated ketone on Si(1 1 1)-7 × 7

The interaction of ethyl vinyl ketone (EVK) with Si(1 1 1)-7 × 7 has been investigated using high-resolution electron energy loss spectroscopy (HREELS), X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations. The disappearance of both stretching vibrations of CH₂ (3099 cm⁻¹) and CO (1684 cm⁻¹) coupled with the appearance of new CC stretching mode (1660 cm⁻¹) in the HREELS spectra of chemisorbed EVK clearly demonstrates the direct involvement of conjugated CC and CO bonds to form a SiC¹H₂C²HC³(C⁴H₂C⁵H₃)OSi surface species via [4 + 2]-like cycloaddition in a highly selective manner. In addition, XPS studies show that the C1s binding energies of C¹/C² and C³ upon chemisorption display chemical downshifts of 0.8 eV and 2.2 eV, respectively, further confirming the proposed [4 + 2]-like cycloaddition reaction for the EVK/Si(1 1 1)-7 × 7 system. DFT theoretical calculations suggest that the proposed [4 + 2]-like cycloadduct is thermodynamically most favorable.     

DFT calculations of XPS/NEXAFS and IR spectra to elucidate the reaction products of acetonitrile with Si(0 0 1)-2 × 1

NEXAFS data [S. Rangan et al., Phys. Rev. B 71 (2005) 165319] and FTIR data [M.P. Schwartz, R.J. Hamers, Surf. Sci. 601 (2007) 945] apparently do not converge in the identification of the reaction products of acetonitrile (CH₃CN) with Si(0 0 1)-2 × 1 at room temperature. Using DFT calculations of core-excited/core-ionized spectra and of IR vibrational frequencies and intensities, we show the consistency of the body of experimental data. Three species are present on the surface in equivalent amounts, a CN moiety, a pendent CN and a CCN ketenimine submitted to a strong twist imposed by the Si bond directionality. More generally, the paper shows the usefulness of spectroscopic data simulations in the elucidation of complex surface chemistry problems.