Spectroscopic and thermodynamic features of conical bubble luminescence

The influence on luminescence from conical bubble collapse (CBL) with varying Ar gas content while perturbing the liquid 1,2-Propanediol (PD) has been investigated. The temporal, spatial, and spectral features were analysed with regards to the dynamics of collapse and liquid degradation. Sulphuric acid and sodium chloride were added to disturb the liquid. The following three cases were studied: PD/Ar, (I), (PD + H₂SO₄)/Ar, (II), and (PD + H₂SO₄ + NaCl)/Ar, (III). The intensities of those cases decrease as III > II > I. Temporally, single and multiple light emissions were found to occur. The pulse shape exhibited a large variety of profiles with a main maximum and up to two local maxima around the main maximum. These local maxima resembled those generated by laser cavitation. Spatially, no radial symmetry was detected in the light emissions. Spectrally, the Swan, CH and CN lines were observed at low volumes of gas and driving pressure. The OH radical and OH-Ar bands, as well as the Na and K lines, consistently appeared superimposed on an underlying continuum that almost disappeared in (III). The Na line was observed with two satellite diffuse bands representing Na-Ar complexes in (I) and (II), whereas in (III), only the line of sodium could be seen. Weak and diffuse emission lines from the Ar atom in the near-IR region were observed in (I) and (II).The proposed mechanism of bright CBL was based on the energy transfer from electron-excited homolytic cleavage products to the chromophore molecules generated during the collapse-rebound time line (∼8200 K and ∼1 ms of collapse time from model), which had accumulated inside the liquid and remained on the walls of cavity during the repetition of the collapse. A general mechanism for the bright CBL is broached.     

Nonlinear optical absorption and fluorescence of phosphine-substituted bithiophenes in the violet-blue spectral region

The nonlinear optical absorptions of two 5,5′-bis(diphenylphosphino)-2,2′-bithiophene derivatives, Ph₂(X)P(C₄H₂S)₂P(X)Ph₂ (X = O, 1; S, 2), have been investigated by direct transmission measurement with both picosecond and nanosecond laser pulses from 420 nm to 480 nm. Saturated dichloromethane solutions of 1 and 2 exhibit strong nonlinear optical absorptions in this violet-blue spectral region with that of 2 being stronger at all wavelengths. In the picosecond regime, at 420 nm, the transmittance rapidly falls to 50% when the incident fluence is 0.22 J/cm² for 1 and 0.11 J/cm² for 2. Two-photon absorption appears to be the primary mechanism for this nonlinear absorption. The two-photon absorption coefficients β for 1 (2.1 cm/GW) and 2 (4.4 cm/GM) were obtained by fitting the measurement of transmittance as the function of incident beam intensity at 420 nm. These β values are comparable with some of the best results obtained for organic materials in the green, red and infrared spectral region. Both compounds also show fluorescence with an emission peak at 390 nm for 1 and 400 nm for 2. The fluorescence of 1 is considerably stronger than is that of 2. The combination of the wide band gap and strong fluorescence emission of 1 makes it a promising candidate as a host material for blue organic light emitting diodes.     

Photophysical characteristics of 4,4′-bis(N-carbazolyl)tolan derivatives and their application in organic light emitting diodes

4,4′-bis(N-carbazolyl)tolan (BCT) and 4,4′-bis[N-(3,6-di-t-butyl)carbazolyl]tolan (BCT-t-Bu) were synthesized as π-expanded analogs of 4,4′-bis(N-carbazolyl)biphenyl. Their photophysical characteristics both in solution and films were thoroughly investigated. Interestingly, the phosphorescence spectrum of BCT was significantly medium-dependent, and the emission maximum was red-shifted by 131 nm from 489 nm in solution at 77 K to 620 nm in a deposited film at 5 K, suggesting the presence of strong intermolecular interactions in the film. BCT and BCT-t-Bu were found to be useful as host materials for fluorescence-based organic light emitting diodes (OLEDs). However, their low triplet energy levels in films negated their potential to act as hosts in phosphorescence-based OLEDs.     

High light electroluminescence of novel Cu(I) complexes

Three novel Cu(I) complexes, [CuDPEphos(NN)]BF₄, where NN=1-(4-5′-phenyl-1,3,4-oxadiazolylbenzyl)-2-pyridinylbenzoimidazole (OXD-Pybm; L1) (1), 1-(4-carbazolylbutyl)-2-pyridinylbenzimidazole (Carl-Pybm; L2) (2), and 1-H-2-pyridinylbenzimidazole (HPybm; L3) (3), were synthesized. The photoluminescent (PL) properties of 1-3 and the electroluminescent (EL) properties of complexes 1 and 2 were systematically studied. The maximum brightness of 2-based devices was 8669 cd/m², which should be the best among the reported Cu(I) complexes-based devices.     

Synthesis, characterization and optical limiting effect of nickel complexes of multi-sulfur 1,2-dithiolene

Three nickel complexes with a new multi-sulfur 1,2-dithiolene ligand, (n-Bu₄N)[Ni(cddt)₂] 1, (Ph₄P)[Ni(cddt)₂] 2 and [Ni(cddt)₂] 3 (cddt=4a, 6, 7, 7a-5H-cyclopenta[b]-1,4-dithiin-2,3-dithiolate), have been synthesized and characterized by electrochemical measurements, IR, EPR and UV-Vis-NIR spectroscopies. The crystal structure of complex 2 is determined. Their optical nonlinearities are measured by the Z-scan technique with an 8 ns pulsed laser at 532 nm and all exhibit NLO absorptive abilities. Complexes 1 and 2 both exhibit effective self-defocusing performance (n₂=−5.81×10⁻¹⁰ esu for 1 and −4.51×10⁻¹⁰ esu for 2). The optical limiting (OL) effects were observed with nanosecond and picosecond laser pulses. The OL capability of complex 3 is superior to C₆₀ at the same experimental condition in ns measurements.     

Photoluminescent properties of heteroleptic cyclometalated platinum(II) complexes bearing 1,3-bis(3,4-dibutoxyphenyl)propane-1,3-dionate as an ancillary ligand

A new series of heteroleptic cyclometalated platinum(II) complexes Pt-1a-f was synthesized, employing 2-arylpyridine (or 1-arylisoquinoline) (HC^∧N-1) and 1,3-bis(3,4-dibutoxyphenyl)propane-1,3-dione (HO^∧O-1) for cyclometalation and as ancillary ligands, respectively, and photoluminescent properties were investigated. Focusing on red-shifted phosphorescence, C^∧N ligands containing π-extended aromatics and electron-rich heterocycles were examined. All obtained complexes exhibited photoluminescence at ambient temperature, and the emission maxima ranged from green (λ_PL=518 nm) to far red (λ_PL=708 nm). The large Stokes shifts of more than 100 nm and sub-microsecond or microsecond emission lifetimes revealed that these complexes are phosphorescent emissive. The quantum yield of Pt-1 ranged from 0.02 to 0.59 at ambient temperature and decreased as the emission maximum was red-shifted. In comparison with the reference platinum(II) complexes, Pt-2 bearing an aliphatic ancillary ligand, such as 2,2,6,6-tetramethylheptane-3,5-dionate (O^∧O-2), the ligand O^∧O-1 did not significantly affect the photoluminescence emission maxima, indicating that the energy gap between the singlet ground state and the triplet level was predominantly dependent on the C^∧N ligand.     

Spectroscopic investigation of the interaction between thiourea-zinc complex and serum albumin

The interaction between 1-Zn (N-p-(dimethylamino)benzamido-N′-phenylthiourea-zinc) complex and serum albumins was studied. In the presence of proteins such as BSA or HSA, the fluorescence spectrum of 1 did not change. However, the fluorescence intensity of its zinc complex (1-Zn) was greatly enhanced. It was ascribed to the fact that zinc ion promoted the interaction between 1 and proteins. Therefore, it was concluded that zinc ion could facilitate bioactivity of thiourea derivative drugs. Energy transfer occurred between 1-Zn and the proteins, which led to decrease of proteins’ emission and increase of 1-Zn’s emission. The fluorescence quenching of serum albumins by 1-Zn was considered as a static quenching process. The binding constants between 1-Zn and serum albumins were estimated as 1.02×10¹² mol⁻¹ L for BSA and 1.32×10¹⁰ mol⁻¹ L for HSA, respectively, and the number of binding sites was 2 for both. The effect of 1-Zn on the conformation of serum albumins was further investigated using synchronous fluorescence spectrometry and the results implied that tyrosine residues of proteins were closer to 1-Zn than tryptophan residues.     

Indium-induced superstructures formed on Si(1 1 0) surfaces

Si(1 1 0) surfaces covered with small amounts of In deposit and then annealed at high temperature were investigated by RHEED, and two kinds of superstructures with A = 3a and B = −a + 4b, and A = 3a − 2b and B = −2a + 4b as primitive translational vectors are reported to form on the surfaces.     

Synthesis, crystal structure and photoconductivity of new molecular complex of C60 with tetrabenzo(1,2-bis[4H-thiopyran-4-ylidene]ethene): Bz4BTPE C60

A new molecular complex of C₆₀ with tetrabenzo(1,2-bis[4H-thiopyran-4-ylidene]ethene), Bz₄BTPE C₆₀ (1) has been obtained. The complex has a layered structure in which closely packed hexagonal layers of C₆₀ alternate with the layers composed of Bz₄BTPE molecules. The complex has a neutral ground state according to UV-vis-NIR spectrum. It has been found that single crystals of 1 show low ‘dark’ conductivity of σ∼10⁻¹⁰ (Ω cm)⁻¹. A 10² increase in photocurrent has been observed upon illuminating the crystal with white light. Photoconductivity of 1 is sensitive to magnetic field with B₀<1 T and increases up to 5% in magnetic field. The photoconductivity spectra of the complex indicate that free charge carriers are generated in the UV-visible range mainly by the Bz₄BTPE excitation (the peaks at 622, 562, 472 and 348 nm) with a possible contribution of charge transfer excitations between neighboring C₆₀ molecules (the peak at 472 nm).     

Energy, momentum, and force in classical electrodynamics: Application to negative-index media

The classical theory of electromagnetism is based on Maxwell's macroscopic equations, an energy postulate, a momentum postulate, and a generalized form of the Lorentz law of force. These seven postulates constitute the foundation of a complete and consistent theory, thus eliminating the need for physical models of polarization P and magnetization M — these being the distinguishing features of Maxwell's macroscopic equations. In the proposed formulation, P(r, t) and M(r, t) are arbitrary functions of space and time, their physical properties being embedded in the seven postulates of the theory. The postulates are self-consistent, comply with special relativity, and satisfy the laws of conservation of energy, linear momentum, and angular momentum. The Abraham momentum density p_EM(r,t) = E(r,t) × H(r,t) / c² emerges as the universal electromagnetic momentum that does not depend on whether the field is propagating or evanescent, and whether or not the host media are homogeneous, transparent, isotropic, linear, dispersive, magnetic, hysteretic, negative-index, etc. Any variation with time of the total electromagnetic momentum of a closed system results in a force exerted on the material media within the system in accordance with the generalized Lorentz law.     

Nature of electric and magnetic dipoles gleaned from the Poynting theorem and the Lorentz force law of classical electrodynamics

Starting with the most general form of Maxwell's macroscopic equations in which the free charge and free current densities, ρ_free and J_free, as well as the densities of polarization and magnetization, P and M, are arbitrary functions of space and time, we compare and contrast two versions of the Poynting vector, namely, S = μ_o^− 1E × B and S = E × H. Here E is the electric field, H is the magnetic field, B is the magnetic induction, and μ_o is the permeability of free space. We argue that the identification of one or the other of these Poynting vectors with the rate of flow of electromagnetic energy is intimately tied to the nature of magnetic dipoles and the way in which these dipoles exchange energy with the electromagnetic field. In addition, the manifest nature of both electric and magnetic dipoles in their interactions with the electromagnetic field has consequences for the Lorentz law of force. If the conventional identification of magnetic dipoles with Amperian current loops is extended beyond Maxwell's macroscopic equations to the domain where energy, force, torque, momentum, and angular momentum are active participants, it will be shown that “hidden energy” and “hidden momentum” become inescapable consequences of such identification with Amperian current loops. Hidden energy and hidden momentum can be avoided, however, if we adopt S = E × H as the true Poynting vector, and also accept a generalized version of the Lorentz force law. We conclude that the identification of magnetic dipoles with Amperian current loops, while certainly acceptable within the confines of Maxwell's macroscopic equations, is inadequate and leads to complications when considering energy, force, torque, momentum, and angular momentum in electromagnetic systems that involve the interaction of fields and matter.     

Synthesis and luminescent properties of two Schiff-base boron complexes

Schiff bases N,N′-o-phenylenebis (salicylideneimine) (H₂L¹), N,N′-p-phenylenebis (salicylideneimine) (H₂L²) and their corresponding boron complexes (BF₂)₂L¹, (BF₂)₂L² were synthesized, respectively. The two boron complexes have been characterized by ¹H NMR, mass spectrometry and elemental analysis, while the luminescent properties of them were investigated with UV-VIS spectroscopy and photoluminescence spectroscopy. Then the three-layer devices [ITO/NPB (60 nm)/(BF₂)₂L¹ (50 nm)/Alq3 (20 nm)/LiF (1 nm)/Al (200 nm)] (device I) and [ITO/NPB (60 nm)/(BF₂)₂L² (50 nm)/Alq3 (20 nm)/LiF (1 nm)/Al (200 nm)] (device II) were fabricated by vacuum deposition. These two devices both exhibited blue green emission at 500 nm, but showed different luminances and efficiencies.     

Whence the Minkowski momentum?

Electromagnetic waves carry the Abraham momentum, whose density is given by p_EM = S(r,t) / c². Here S(r,t) = E(r,t) × H(r,t) is the Poynting vector at point r in space and instant t in time, E and H are the local electromagnetic fields, and c is the speed of light in vacuum. The above statement is true irrespective of whether the waves reside in vacuum or within a ponderable medium, which medium may or may not be homogeneous, isotropic, transparent, linear, magnetic, etc. When a light pulse enters an absorbing medium, the force experienced by the medium is only partly due to the absorbed Abraham momentum. This absorbed momentum, of course, is manifested as Lorentz force (while the pulse is being extinguished within the absorber), but not all the Lorentz force experienced by the medium is attributable to the absorbed Abraham momentum. We consider an absorptive/reflective medium having the complex refractive index n₂ + iκ₂, submerged in a transparent dielectric of refractive index n₁, through which light must travel to reach the absorber/reflector. Depending on the impedance-mismatch between the two media, which mismatch is dependent on n₁, n₂, κ₂, either more or less light will be coupled into the absorber/reflector. The dependence of this impedance-mismatch on n₁ is entirely responsible for the appearance of the Minkowski momentum in certain radiation pressure experiments that involve submerged objects.     

Isomerization and fluorescence characteristics of sterically hindered azobenzene derivatives

We report synthesis and isomerization behaviors of sterically hindered azobenzene derivatives (1 and 2) with decyloxy and hydroxy groups, respectively, and their fluorescence enhancement under UV light irradiation characterized by means of absorption and fluorescence spectroscopy measurements. Upon irradiation of as-prepared solution (1) with UV light (∼200 mJ/cm²) a cis-rich photostationary state was reached. Obviously different from 2 showing very fast thermal cis-to-trans isomerization within 2 min, slow cis-to-trans thermal back isomerization of 1 with a long alkyl chain at ambient temperature was observed on the time scale of weeks. In contrast to no striking changes in absorption and fluorescence spectra of compound 2, the azobenzene 1 showed green fluorescence upon prolonged irradiation with UV light (about 3-8 J/cm² exposure doses), although both the initial trans-rich and cis-rich states of azobenzene molecules were not fluorescent in solution. The stability of fluorescence efficiency caused by drying and redissolving processes was examined.     

Sonochemical syntheses of a nano-sized copper(II) supramolecule as a precursor for the synthesis of copper(II) oxide nanoparticles

Nanoparticles of a three-dimensional supramolecular, [Cu(L)₂(H₂O)₂] (1), (L⁻ = 1H-1,2,4-triazole-3-carboxylate), have been synthesized by a sonochemical process and characterized by scanning electron microscopy, X-ray powder diffraction, IR spectroscopy and elemental analyses. The thermal stability of compound 1 both its bulk and nano-size has been studied by thermal gravimetric (TG) and differential thermal analyses (DTA) and compared each other. Concentration of initial reagents effects on size and morphology of nano-structured compound 1, have been studied. Calcination of the nano-sized compound 1 at 600 °C under air atmosphere yields CuO nanoparticles.     

Characterization of YSr2Fe3O8 − δ as electrode materials for SOFC

YSr₂Fe₃O_8 − δ was prepared by traditional solid state reaction method and characterized by X-ray diffraction, ac impedance, dc conductivity, dilatometry and thermogravimetric analysis for possible use in solid oxide fuel cells (SOFCs). YSr₂Fe₃O_8 − δ crystallizes with tetragonal symmetry in the space group P4/mmm and found to be stable at high temperatures under H₂ and air. Four probe dc electrical conductivity measurements show that the conductivity increases up to 745 K and then decreases with temperature; the highest conductivity σ_745K = 43.5 S cm^− 1. The n-type conductivity at low oxygen partial pressure (pO₂) changes to p-type at high pO₂. Polarization behavior was investigated measuring the ac impedance response in symmetrical cell arrangements in air with YSZ and GDC electrolytes. Cathodic area specific resistance (ASR) varies with firing temperature. The lowest area specific resistance was observed with a GDC electrolyte fired at 1000 °C. In case of YSZ, ASR increases and in case of GDC, ASR decreases in air when electrode firing temperature decreases. At 800 °C ASRs are 0.20 Ω cm² and 0.65 Ω cm² with GDC and YSZ electrolytes, respectively, in air. Fuel cell measurements with symmetrical electrodes were performed using a thin YSZ electrolyte under H₂ at anode and air at cathode, show that the power density is about 0.035 W/cm² at 900 °C.     

Sensitized luminescence of Eu and Tb macrocyclic complexes bearing benzophenone antennae

Sensitized luminescence behavior of lanthanide (Ln=Eu³⁺, Tb³⁺) macrocyclic cyclen (1,4,7,10-tetraazacyclododecane) complexes bearing one or four benzophenone (BP) moieties as antenna (LnL1 and LnL4) has been studied in water. Despite higher molar extinction coefficient of EuL4 owing to four antennae, it shows only one-thirtieth the luminescence intensity of EuL1. Energy level of triplet excited-state of BP antenna (E_T) is only a few kJ mol⁻¹ higher than that of ⁵D₂ excited-state of Eu³⁺, thus promoting a back energy transfer (BET) from ⁵D₂ of Eu³⁺ to ground-state BP antennae. On EuL4 bearing four antennae, BET occurs more rapidly than that on EuL1, thus exhibiting much weaker luminescence. For Tb complexes, the energy gap between E_T of BP antenna and ⁵D₄ excited state of Tb³⁺ is large enough (>13 kJ mol⁻¹), such that practically no BET occurs. The luminescence intensity of TbL4 is, however, lower (two-third) than that of TbL1. Time-resolved luminescence measurement reveals that hydration number of Tb³⁺ within TbL4 is twice that within TbL1. This is because the structural distortion of ligands on TbL4, caused by an intramolecular dipole-dipole interaction among the BP antennae, allows coordination of higher number of H₂O molecules to Tb³⁺, thus leading to a strong Tb luminescence quenching via O-H oscillators.     

Second-order optical nonlinearities from χ gratings induced by holographic all-optical poling

The paper presents the second-order optical nonlinearities from χ⁽²⁾ gratings induced by holographic all-optical poling for azobenzene polymer. Second harmonic (SH) signal along the directions with two different vectors was measured. One is strong SH signal diffracted in the same direction as 2ω writing beam with wave vector k_2ω and the other is weak SH signal diffracted in the direction of wave vector of 4k_ω - k_2ω + Δk where k_ω is wave vector of ω beam and Δk is the wave vector mismatch whose vector is parallel to k_ω. The latter signal was used as a tool to monitor the formation of holographic χ⁽²⁾ gratings in real-time because it has off-axis wave vector different from both k_ω and k_2ω. The increase of 2ω intensity on poling process led to the large increase of second-order optical nonlinearity. The real-time monitoring showed that it also gave the large relaxation of second-order optical nonlinearity on poling process. The increase of 2ω (532 nm) energy enhanced the increase of local heating, which led to easier alignment of azobenzene chromophore and also larger relaxation of aligned chromophore.     

The synthesis and photophysical properties of novel cationic tetra pyridiloxy substituted aluminium, silicon and titanium phthalocyanines in water

This work reports on the synthesis, characterisation and photophysical properties of new unquaternized β-2,(3)-tetra-(2 pyridiloxy) aluminium(III) (3a), silicon(IV) (3b), titanium(IV) (3c) phthalocyanines and their water-soluble quaternized counterparts, 4a, 4b and 4c, respectively. The water-soluble silicon(IV) (4b) and titanium(IV) (4c) phthalocyanine derivatives were found to be aggregated in aqueous media but were partially or fully disaggregated in the presence of a surfactant Cremophor^® EL (CEL). The photophysical properties of aggregated complexes were investigated both in the presence of CEL and in pH 11 alone. Low triplet and fluorescence yield were obtained in pH 11 but an improvement was achieved upon addition of CEL for the aggregated complexes. The unquaternized silicon(IV) phthalocyanine complex (3b) gave the highest triplet quantum yield of 0.77 in DMF followed by its quaternized derivative (4b) with triplet yield of 0.73 in pH 11 plus CEL. The highest triplet lifetime of 220 μs was obtained for 4b in the presence of CEL. Higher fluorescence yields of 0.23 were obtained for quaternized water-soluble aluminium(III) phthalocyanine derivative (4a) in the presence of CEL.     

Sonochemical syntheses and characterization of nano-sized lead(II) coordination polymer with ligand 1H-1,2,4-triazole-3-carboxylate

Nanoparticles of a two-dimensional coordination polymer, {[Pb(L)(μ_1,1-NCS)(H₂O)]}_n (1), (L⁻ = 1H-1,2,4-triazole-3-carboxylate), have been synthesized by a sonochemical process and characterized by scanning electron microscopy, X-ray powder diffraction, IR spectroscopy and elemental analyses. The thermal stability of compound 1 both its bulk and nano-size has been studied by thermal gravimetric (TG) and differential thermal (DTA) analyses and compared each other. Concentration of initial reagents effects and the role of power ultrasound irradiation on size and morphology of nano-structured compound 1, have been studied. Calcination of the single crystals and nano-sized compound 1 at 400 °C under air atmosphere yields mixture of PbS and Pb₂(SO₄)O nanoparticles. Results show that the size and morphology of the PbS and Pb₂(SO₄)O nanoparticles are dependent upon the particles size of compound 1. A decrease in the particles size of compound 1 leads to a decrease in the particles size of the PbS and Pb₂(SO₄)O.