Nanoscratch study of Zn1−xMnxO heteroepitaxial layers

We investigated the nanotribological properties of Zn_1−xMn_xO epilayers (0 ≤ x ≤ 0.16) grown by molecular beam epitaxy (MBE) on sapphire substrates. The surface roughness and friction coefficient (μ) were analyzed by means of atomic force microscopy (AFM) and hysitron triboscope nanoindenter techniques.The nanoscratch system gave the μ value of the films ranging from 0.17 to 0.07 and the penetration depth value ranging 294-200 nm when the Mn content was increased from x = 0 to 0.16. The results strongly indicate that the scratch wear depth under constant load shows that higher Mn content leads to Zn_1−xMn_xO epilayers with higher shear resistance, which enhances the Mn-O bond. These findings reveal that the role of Mn content on the growth of Zn_1−xMn_xO epilayers can be identified by their nanotribological behavior.     

Effect of microstructure on the nanomechanical properties of Zn1−xCdxSe alloys

We present a study of the nanoindentation behavior of Zn_1−xCd_xSe epilayers grown using molecular beam epitaxy; the surface roughness, microstructure, and crystallinity were analyzed using atomic force microscopy, cross-sectional transmission electron microscopy, and X-ray diffraction; the hardness H and elastic modulus E were studied using nanoindentation techniques. We found that these highly crystalline materials possessed no stacking faults or twins in their microstructures. We observed a very marked increase in the value of H and a significant decrease in the value of E upon increasing the concentration of Cd, presumably because of an increase in the stiffness of the CdSe bond relative to that of the ZnSe bond. We observed a corresponding shrinkage of the contact-induced damage area for those films having a small grain size and a higher value of H. It appears that resistance against contact-induced damage requires a higher Cd concentration.     

Crystal structures of two variants for CuPtB-type ordering in strained CdxZn1−xTe epilayers

Two variants of CuPt_B-type orderings in strained Cd_xZn_1−xTe epilayers were investigated by using transmission electron microscopy (TEM) and selected area diffraction pattern (SADP) measurements. The TEM images on the Cd_0.15Zn_0.85Te epilayers depicted strong contrast modulations along the [110] direction, and the SADP images showed superstructure reflection spots corresponding to a CuPt_B-type ordering. Possible crystal structures for the two variants of CuPt_B-type ordering in the Cd_xZn_1−xTe epilayers, which were determined from the SADP images, are presented.     

Structural, optical and electrical properties of Zn1−xCdxO thin films prepared by PLD

Ternary polycrystalline Zn_1−xCd_xO semiconductor films with cadmium content x ranging from 0 to 0.23 were obtained on quartz substrate by pulse laser deposited (PLD) technique. X-ray diffraction measurement revealed that all the films were single phase of wurtzite structure grown on c-axis orientation with its c-axis lattice constant increasing as the Cd content x increasing. Atomic force microscopy observation revealed that the grain size of Zn_1−xCd_xO films decreases continuously as the Cd content x increases. Both photoluminescence and optical measurements showed that the band gap decreases from 3.27 to 2.78 eV with increasing the Cd content x. The increase in Cd content x also leads to the broadening of the emission peak. The resistivity of Zn_1−xCd_xO films decreases evidently for higher values of Cd content x. The shift of PL emission to visible light as well as the decrease of resistivity makes the Zn_1−xCd_xO films potential candidate for optoelectronic device.     

Structural,electronic and optical properties of CdxZn1 − xS alloys from first-principles calculations

Structural, electronic and optical properties as well as structural phase transitions of ternary alloy Cd_xZn_1 − xS have been investigated using the first-principles calculations based on the density functional theory. We found that the crystal structure of Cd_xZn_1 − xS alloys transforms from wurtzite to zinc blende as Cd content of x=0.83$x=0.83$. Effect of Cd content on electronic structures of Cd_xZn_1 − xS alloys has been studied. The bandgaps of Cd_xZn_1 − xS alloys with wurtzite and zinc blende structures decrease with the increase of Cd content. Furthermore, dielectric constant and absorption coefficient also have been discussed in detail.     

The optical properties of CdxZn1−xS thin films on glass substrate prepared by spray pyrolysis method

A series of Cd_xZn_1−xS thin films have been deposited on glass substrates using spray pyrolysis technique. The crystallinity and microstructure of Cd_xZn_1−xS thin films have been investigated by X-ray diffraction (XRD). Based on the results of Hall measurements, the films obtained were an n-type semiconductor. The X-ray data analysis of Cd_xZn_1−xS thin films showed that the grain size of the Cd_xZn_1−xS increased with increase in Cd composition. It is observed that the band gap increases as the Cd composition decreases. The results also showed a blue shift of absorption edge of optical transmission spectra is increases as Zn ratio increases. The effects of Cd composition on the structural and optical properties of Cd_xZn_1−xS thin films were related to their grain size, stress and carrier concentration.     

Study on the doping stability and electronic structure of wurtzite Zn1−xCdxO alloys by first-principle calculations

An ab initio calculation based on density functional theory is applied to study the doping stability and electronic structure of wurtzite Zn_1−xCd_xO alloys. It is found that the different alloy configurations of Zn_1−xCd_xO with a given Cd content are possible thermodynamically, but having different band gaps. With increasing Cd content, the formation enthalpy of Zn_1−xCd_xO alloy increases sharply. The Cd-content dependence of the band-gap values can be fitted with a second-order polynomial. The reduction of band gap can be attributed to the contributions of the hybridization of Zn-4s and Cd-5s, the enhancement of p-d repulsion, and the tensile strain due to Cd-doping.     

A comparison between optically active CdZnSe/ZnSe and CdZnSe/ZnBeSe self-assembled quantum dots: effect of beryllium

The composition and size of optically active Cd_xZn_1−xSe/ZnSe quantum dots are estimated with a previously developed method. The results are then compared with those obtained for Cd_xZn_1−xSe/Zn_0.97Be_0.03Se QDs. We show that introducing Be into the barrier material enhances both Cd composition and quantum size effect of optically active quantum dots.     

Properties of optical phonons in Zn1−x−yMgyBexSe quaternary mixed crystal

Long wavelength optical lattice vibration and dielectric constants of the quaternary mixed crystal Zn_1−x−yMg_yBe_xSe are investigated based on the pseudo-unit-cell mode and Born-Huang procedure. It is found that this material shows a three-mode behavior and the oscillator strength of each mode is mainly controlled by only one component. The theoretical results also show that the linear interpretation method for dielectric constants is reliable. The vibrational frequencies and the oscillator strengths of the ternary mixed crystals Be_xZn_1−xSe, Be_xMg_1−xSe and Mg_xZn_1−xSe are also calculated as special cases of the quaternary mixed crystal for comparing with experiments. The calculation shows agreement with the experimental results.     

Formation of ZnO and Zn1−xCdxO films on CdTe/CdZnTe single crystals

In this work we report on the properties of ZnO and Zn_1−xCd_xO films formed on top of CdTe and CdZnTe single crystals. The films have been obtained by thermal evaporation of Zn metal films and further oxidation in atmospheric conditions. The structural and compositional characteristics of the films have been analysed by means of scanning electron microscopy and energy-dispersive X-ray analysis. The chemical composition of the films as a function of growth parameters has been obtained. It has been possible to demonstrate by Raman spectroscopy the formation of both ZnO and Zn_1−xCd_xO films. The possible inter-diffusion effects between the films and the substrate, derived from the oxidation process, have been discussed. It has been possible to check by means of photoluminescence, the optical quality of the ZnO and Zn_1−xCd_xO films, also regarding to the presence of local changes. Differences between the optical spectra obtained from various ZnO films grown on top of CdTe and CdZnTe substrates enabled the determination of compositional differences introduced by the substrate when the deposition parameters are modified.     

On the magnetocaloric effect in Gd(Zn1−xCdx)

In this work, we calculate the magnetocaloric effect in the compounds Gd(Zn_1−xCd_x). We use a model Hamiltonian of interacting spins in which the indirect exchange interaction parameter between localized spins was calculated as a function of Cd concentration. The calculated isothermal entropy changes and the adiabatic temperature changes upon magnetic field variations are in good agreement with the available experimental data.     

Effects of in situ thermal annealing on the structural, optical, and electrical properties in Hg0.7Cd0.3Te epilayers grown on CdTe buffer layers

Scanning electron microscopy (SEM), Fourier transform infrared (FTIR) transmission, and Hall effect measurements were performed to investigate the structural, optical, and electrical properties of as-grown and in situ-annealed Hg_0.7Cd_0.3Te epilayers grown on CdTe buffer layers by using molecular beam epitaxy. After the Hg_0.7Cd_0.3Te epilayers had been annealed in a Hg-cell flux atmosphere, the SEM images showed that the surface morphologies of the Hg_0.7Cd_0.3Te thin films were mirror-like with no indication of pinholes or defects, and the FTIR spectra showed that the transmission intensities had increased in comparison to that of the as-grown Hg_0.7Cd_0.3Te epilayer. Hall-effect measurements showed that n-Hg_0.7Cd_0.3Te epilayers were converted to p-Hg_0.7Cd_0.3Te epilayers. These results indicate that the surface, optical, and electrical properties of the Hg_1 − xCd_xTe epilayers are improved by annealing and that as-grown n-Hg_1 − xCd_xTe epilayers can be converted to p-Hg_1 − xCd_xTe epilayers by in situ annealing.     

Activation energies of the acceptor-bound excitons and the donor-acceptor pairs in nitrogen-doped p-type ZnSe, p-type ZnSySe1−y, and p-type Zn1−xMgxSySe1−y epitaxial films grown on GaAs (1 0 0) substrates

Nitrogen-doped p-type ZnSe, p-type ZnS_ySe_1−y, and p-type Zn_1−xMg_xS_ySe_1−y epilayers were grown on n-type GaAs (1 0 0) substrates by molecular beam epitaxy. Photoluminescence (PL) spectra for the p-type ZnSe and the lattice-matched p-type ZnS_0.06Se_0.94, and p-type Zn_0.92Mg_0.08S_0.12Se_0.88 epilayers showed a deep acceptor bound exciton emission and a donor-acceptor pair emission. Temperature-dependent PL measurements were carried out to determine the activation energies of these states. The activation energies of the acceptor-bound excitons and the donor-acceptor pairs were determined to be 40 and 65 meV in the p-type ZnSe epilayer, 20 and 45 meV in the p-type ZnS_0.06Se_0.94, and 45 and 43 meV in the p-type Zn_0.92Mg_0.08S_0.12Se_0.88 epilayers.     

The structural, electronic and optical properties of CdxZn1 − xSe ternary alloys

The structural, electronic, and optical properties of Cd_xZn_1 − xSe alloys are investigated using the first-principles plane-wave pseudopotential method within the LDA approximations. In particular, the lattice constant, bulk modulus, electronic band structures, density of state, and optical properties such as dielectric functions, refractive index, extinction coefficient and energy loss function are calculated and discussed. Our results agree well with the available data in the literature.     

Interband optical absorption in a strained CdxZn1−xO/ZnO quantum dot

Numerical calculations of the excitonic absorption spectra in a strained Cd_xZn_1−xO/ZnO quantum dot are investigated for various Cd contents. We calculate the quantized energies of the exciton as a function of dot radius for various confinement potentials and thereby the interband emission energy is computed considering the internal electric field induced by the spontaneous and piezoelectric polarizations. The optical absorption as a function of photon energy for different dot radii is discussed. Decrease of exciton binding energy and the corresponding optical band gap with the Cd concentration imply that the confinement of carriers decreases with composition x. The main results show that the confined energies and the transition energies between the excited levels are significant for smaller dots. Non-linearity band gap with the increase in Cd content is observed for smaller dots in the strong confinement region and the magnitude of the absorption spectra increases for the transitions between the higher excited levels.     

Ab-initio calculations of Co-based diluted magnetic semiconductors Cd1−xCoxX (X=S, Se, Te)

Ab-initio calculations are performed to investigate the structural, electronic and magnetic properties of spin-polarized diluted magnetic semiconductors composed of II-VI compounds Cd_1−xCo_xX (X=S, Se, Te) at x=0.25. From the calculated results of band structure and density of states, the half-metallic character and stability of ferromagnetic state for Cd_1−xCo_xS, Cd_1−xCo_xSe and Cd_1−xCo_xTe alloys are determined. It is found that the tetrahedral crystal field gives rise to triple degeneracy t_2g and double degeneracy e_g. Furthermore, we predict the values of spin-exchange splitting energies Δ_x(d) and Δ_x(p−d) and exchange constants N₀α and N₀β produced by the Co 3d states. Calculated total magnetic moments and the robustness of half-metallicity of Cd_1−xCo_xX (X=S, Se, Te) with respect to the variation in lattice parameters are also discussed. We also extend our calculations to x=0.50, 0.75 for S compounds in order to observe the change due to increase in Co.     

Bandgap engineering of Cd1−xSrxO

Structural, electronic and optical properties of Cd_1−xSr_xO (0≤x≤1) are calculated for the first time using density functional theory. Our results show that these properties are strongly dependent on x. The bond between Cd and O is partially covalent and the covalent nature of the bond decreases as the concentration of Sr increases from 0% to 100%. It is found that Cd_1−xSr_xO is an indirect bandgap compound for the entire range of x and the bandgap of the alloy increases from 0.85 to 6.00 eV with the increase in Sr concentration. Frequency dependent dielectric functions ε₁(ω), ε₂(ω), refractive index n(ω) and absorption coefficient α(ω) are also calculated and discussed in detail. The peak value of refractive indices shifts to higher energy regions with the increase in Sr. The striking feature of these alloys is that Cd_0.5Sr_0.5O is an anisotropic material. The larger value of the extraordinary refractive index confirms that the material is positive birefringence crystal. The present comprehensive theoretical study of the optoelectronic properties of the material predicts that it can be effectively used in optoelectronic applications in the wide range of spectrum; IR, visible and UV.     

Cu(In,Ga)Se2 superstrate-type solar cells with Zn1−xMgxO buffer layers

Superstrate-type Cu(In,Ga)Se₂ (CIGS) thin film solar cells were fabricated using Zn_1−xMg_xO buffer layers. Due to the diffusion of Cd into CIGS during the growth of the CIGS layer, the conventional buffer material of CdS is not suitable. ZnO is a good candidate because of higher thermal tolerance but the conduction band offset (CBO) of ZnO/CIGS is not appropriate. In this study, the Zn_1−xMg_xO buffer layers were used to fulfill both the requirements. The superstrate-type solar cells with a soda-lime glass/In₂O₃:Sn/Zn_1−xMg_xO/CIGS/Au structure were fabricated with different band gap energies of the Zn_1−xMg_xO layer. The CIGS layers [Ga/(In + Ga)∼0.25] were deposited by co-evaporation method. The substrate temperature during the CIGS deposition of 450 °C did not cause the intermixing of the Zn_1−xMg_xO and CIGS layers. The conversion efficiency of the cell with Zn_1−xMg_xO was higher than that with ZnO due to the improvement of open-circuit voltage and shunt resistance. The results well corresponded to the behavior of the adjustment of CBO, demonstrating that the usefulness of the Zn_1−xMg_xO layer for the CBO control in the superstrate-type CIGS solar cells.     

Modification of Cd1−xMnxTe crystal surface layers by nanopulsed laser irradiation

The surface modification of Cd_1−xMn_xTe (x = 0-0.3) crystal wafers under pulsed laser irradiation has been studied. The samples were irradiated by a Q-switched ruby laser with pulse duration of 80 ns. Optical diagnostics of laser-induced thermal processes were carried out by means of time-resolved reflectivity measurements at wavelengths 0.53 and 1.06 μm. Laser irradiation energy density, E varied in the range of 0.1-0.6 J/cm². Morphology of irradiated surface was studied using scanning electron microscopy. The energy density whereby the sample surface starts to melt, depends on Mn content and is equal to 0.12-0.14 J/cm² for x ≤ 0.2, in the case of x = 0.3 this value is about 0.35 J/cm². The higher Mn content leads to higher melt duration. The morphology of laser irradiated surface changes from a weakly modified surface to a single crystal strained one, with an increase in E. Under irradiation with E in the range of 0.21-0.25 J/cm², the oriented filamentary crystallization is observed. The Te inclusions on the surface are revealed after the irradiation of samples with small content of Mn.     

BiFeO3/Zn1−xMnxO bilayered thin films

BiFeO₃/Zn_1−xMn_xO (x = 0-0.08) bilayered thin films were deposited on the SrRuO₃/Pt/TiO₂/SiO₂/Si(1 0 0) substrates by radio frequency sputtering. A highly (1 1 0) orientation was induced for BiFeO₃/Zn_1−xMn_xO. BiFeO₃/Zn_1−xMn_xO thin films demonstrate diode-like and resistive hysteresis behavior. A remanent polarization in the range of 2P_r ∼ 121.0-130.6 μC/cm² was measured for BiFeO₃/Zn_1−xMn_xO. BiFeO₃/Zn_1−xMn_xO (x = 0.04) bilayer exhibits a highest M_s value of ∼15.2 emu/cm³, owing to the presence of the magnetic Zn_0.96Mn_0.04O layer with an enhanced M_s value.