Alternating Sequence Control for Carboxylic Acid and Hydroxy Pendant Groups by Controlled Radical Cyclopolymerization of a Divinyl Monomer Carrying a Cleavable Spacer

By utilizing features of the hemiacetal ester (HAE) bond: easy formation from vinyl ether and carboxylic acid and easy cleavage into different functional groups (‐COOH and ‐OH), we achieved control of the alternating sequence of two functional pendant groups of a vinyl copolymer. Methacrylate‐ and acrylate‐based vinyl groups were connected through HAE bonds to prepare a cleavable divinyl monomer, which was cyclo‐polymerized under optimized conditions in a ruthenium‐catalyzed living radical polymerization. Subsequent cleavage of the HAE bonds in the resultant cyclo‐pendant led to a copolymer consisting of alternating methacrylic acid and 2‐hydroxyethyl acrylate units as analyzed by ¹³C NMR spectroscopy. The alternating sequence of ‐COOH and ‐OH pendants specifically provided a lower critical solution temperature (LCST) in an ether solvent, which was not observed with the random copolymer of same composition ratio.     

A Transformable and Bulky Methacrylate Monomer That Enables the Synthesis of an MMA-nBA Alternating Copolymer: Sequence-Dependent Self-Healing Properties

In this study, we designed a methacrylate molecule with an alkyl-substituted trichloro salicylic acid pendant as a transformable bulky monomer to enable the synthesis of an alternating copolymer of methyl methacrylate (MMA) and n-butyl acrylate (nBA). The adamantyl-substituted methacrylate monomer ( 1-Ad ) showed very low homopolymerization propensity in radical polymerizations, but afforded the alternating copolymer with nBA via copolymerization. The 1-Ad units in the resultant copolymer were quantitatively and selectively transformed into MMA via transesterification with methanol to yield the alternating copolymer of MMA and nBA. Its alternating sequence was clearly demonstrated by a structural analysis via ¹³C NMR spectroscopy as well as the low reactivity ratios for the 1-Ad and nBA pair. Finally, we verified the superior self-healing ability of the alternating copolymer compared to that of the corresponding 1 : 1 statistical copolymer.     

Tuning the Properties of Ester-Based Degradable Polymers by Inserting Epoxides into Poly(ϵ-caprolactone)

A series of ester-ether copolymers were obtained via the reaction between α,ω-dihydroxyl poly(ϵ-caprolactone) (PCL) and ethylene oxide (EO) or monosubstituted epoxides catalyzed by strong phosphazene bases. The two types of monomeric units were distributed in highly random manners due to the concurrence of epoxide ring-opening and fast transesterification reactions. The substituent of epoxide showed an interesting bidirectional effect on the enzymatic degradability of the copolymer. Compared with PCL, copolymers derived from EO exhibited enhanced hydrophilicity and decreased crystallinity which then resulted in higher degradability. For the copolymers derived from propylene oxide and 1,2-butylene oxide, the hydrophobic alkyl pendant groups also allowed lower crystallinity of the copolymers thus higher degradation rates. However, further enlarging the pendant groups by using styrene oxide or 2-ethylhexyl glycidyl ether caused a decrease in the degradation rate, which might be ascribed to the higher bulkiness hindering the contact of ester groups with lipase.     

Precision synthesis of graft copolymers via living cationic polymerization of p‐acetoxystyrene followed by friedel–crafts‐type termination reaction

This study describes a novel precision synthesis strategy for graft copolymers using Friedel–Crafts‐type termination reaction between a cationically prepared poly(styrene derivative) and the naphthyl side groups from a poly(vinyl ether) main chain. The pendant alkoxynaphthyl groups on the poly(vinyl ether) efficiently terminated the living cationic polymerization of p‐acetoxystyrene (AcOSt) with SnCl₄ in the presence of ethyl acetate as an added base. This research provides the first example of a well‐defined graft copolymer prepared using this method. The resulting polymer contained 40 poly‐(AcOSt) branches, as calculated from the M_w determined via gel permeation chromatography–MALS analysis, which was in good agreement with the estimated number of branches obtained from ¹H NMR analysis. The acetoxy groups in the grafted poly(AcOSt) chains were easily converted into phenolic hydroxy groups under basic conditions. The as‐obtained graft copolymer with poly(p‐hydroxystyrene) side chains exhibited a pH‐sensitive phase separation in water. The synthetic method for preparing the graft copolymers was also effective in the living cationic polymerizations of other styrene derivatives. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4675–4683     

Anionic copolymerization of 2,3,4,5,6-pentafluorostyrene and divinylbenzene

Anionic copolymerizations of 2,3,4,5,6-pentafluorostyrene (PFS) with 1,3-divinylbenzene (m-DVB) and 1,4-divinylbenzene (p-DVB) were performed by using lithium diisopropylamide as an initiator in order to synthesize the fluorine-containing linear polymer with pendant vinyl groups. The products were soluble copolymers possessing both PFS and DVB monomeric units, and the DVB monomeric unit in copolymer had pendant vinyl group. This copolymerization reaction took a much longer time than that of styrene with DVB. The copolymerization parameter of this system was examined from copolymer composition curves. In this system, m-DVB was found to be more reactive than p-DVB. The reactivity of copolymerization was largely influenced by the reactivity of active species. © 1993 John Wiley & Sons, Inc.     

Polymerization of allyl(vinyl phenyl) ethers and reactions of the resulting polymers

Solution polymerizations of allyl(o-vinyl phenyl)ether and allyl(p-vinyl phenyl)ether with cationic and radical initiators were investigated. Soluble polymers were formed in polymerizations with boron trifluoride etherate and with benzoyl peroxide. In polymerization with azobisisobutyronitrile the polymerization in dilute solution gave a soluble polymer, whereas that in concentrated solution gave a crosslinked, insoluble one. For informationon the polymerization behavior some infrared and ultraviolet spectroscopic investigations of the soluble polymers were made. From these results it appears that polymers with pendant allyl groups are formed in polymerization with boron trifluoride etherate at low temperature, and polymers containing pendant vinyl groups and allyl groups are obtained with the two types of radical initiator. Copolymerizations of these monomers with ethyl vinyl ether and styrene with the use of boron trifluoride etherate were sucessfully effected. Such reactions as Claisen rearrangement, crosslinking induced with radical initiators, and epoxidation with perbenzoic acid were examined for the polymers prepared in the polymerization with boron trifluoride etherate. Good results were obtained for the former two reactions. However, the latter was unsuccessful.     

Photocatalyzed Hydrogen Atom Transfer Degradation of Vinyl Polymers: Cleavage of a Backbone C−C Bond Triggered by Radical Activation of a C−H Bond in a Pendant

In this work, we achieved a triggering degradation of polymers composed of carbon-carbon (C−C) bonded backbone without relying on introduction of labile heteroatom-based bond. The crucial point for the achievement is using vinyl ether (VE) as a comonomer in radical copolymerization of (meth)acrylate for introduction of the carbon-hydrogen (C−H) bonds active for photocatalyzed hydrogen atom transfer (HAT) as triggers in the pendant. Interestingly, methyl methacrylate (MMA)-n-butyl vinyl ether (NBVE) copolymer underwent degradation in acetonitrile in the presence of benzophenone (Ph₂CO) under UV irradiation at 80 °C. The degradation did not take place, when any one of UV, Ph₂CO, heat, and NBVE unit was removed or HAT-active solvent such as toluene and 1,4-dioxane was used. These control experiments strongly supported the HAT-triggering degradation. Furthermore, the degradation behaviors of the copolymers with other vinyl ethers such as tert-butyl vinyl ether and methyl isopropenyl ether indicated that the C−H bond neighboring to oxygen on the pendant is mainly responsible for the trigger leading to degradation. The HAT-triggering degradation was also demonstrated even with the acrylate-based copolymer.     

Ring-opening polymerization of cyclobutane adducts of tetracyanoethylene and vinyl ethers with tertiary amines

Ring-opening polymerizations of cyclobutane adducts of tetracyanoethylene (TCNE) and vinyl ethers (VE) or p-methoxystyrene with tertiary amines are described. The polymerization of the cyclobutane adduct 1a of TCNE and ethyl vinyl ether (EVE) was carried out with 10 mol % of triethylamine in acetonitrile at ambient temperature to afford the alternating copolymer of TCNE and EVE with high molecular weight in good yield under various conditions. Under the optimum condition, the cyclobutane adducts of TCNE and a variety of VEs such as n-butyl vinyl ether, isobutyl vinyl ether, 2,3-dihydrofuran, and 3,4-dihydro-2H-pyran were polymerized to yield similar polymers. Although the cyclobutane adduct 4 of TCNE and p-methoxystyrene did not polymerize under these conditions, the treatment of 4 with 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) in acetonitrile at 60°C gave the polymer. On the basis of the fact that the polymer molecular weight increased rapidly at the initial stage and slowly even after the consumption of all of monomers, we propose that the tertiary amine initiates the chain anionic polymerization of the cyclobutane adduct to afford an ammonium macrozwitterion 3 , which is subjected to the intermolecular nucleophilic substitution with each other in a step polymerization manner. © 1995 John Wiley & Sons, Inc.     

Synthesis and polymerizations of methyl 3,3-difluorocyclobutene-1-carboxylate and methyl 3,3,4,4-tetrafluorocyclobutene-1-carboxylate

Two new monomers, methyl 3,3-difluorocyclobutene-1-carboxylate (MDFC) and methyl 3,3,4,4-tetrafluorocyclobutene-1-carboxylate (MTFC), were synthesized. Under free radical conditions, MDFC gave homopolymer; MTFC did not. Copolymerizations of these monomers showed them to behave as very electron-deficient monomers, MTFC more so than MDFC. MDFC copolymerized with various vinyl ethers and styrenes to give high yields of almost 1:1 copolymers. Acrylonitrile copolymerized in lower yield with less incorporation of MDFC; trimethylethylenetricarboxylate did not copolymerize. Bicyclobutane-1-carbonitrile copolymerized well. MTFC copolymerized with the very electron-rich monomers t-butyl vinyl ether and p-methoxystyrene, leading to alternating and nearly alternating copolymers, respectively, and even styrene tended to give almost 1:1 copolymers. Acrylonitrile gave only polyacrylonitrile, and trimethylethylenetricarboxylate did not react with MTFC under free radical conditions. The reaction of MTFC with the electron-rich monomers t-butyl vinyl ether and p-methoxystyrene occurred spontaneously via charge transfer complexes. Thermally, the copolymers were rather stable, those of MTFC more so than those of MDFC.     

Bulk rigid-rod molecular composites of articulated rod copolymers with thermoplastic pendants

Bulk rigid-rod molecular composites were successfully obtained by powder consolidation of a copolymer containing both the reinforcing rigid-rod segments and the thermoplastic matrix. By chemically linking the reinforcing segments and the matrix molecule, the copolymer was designed to minimize phase separation in the molecular composite. The copolymer was an articulated rigid-rod poly(p-phenylenebenzobisthiazole), aPBT, with an aromatic poly(ether ketone), mPEK, thermoplastic pendant grafted at the points of articulation. The copolymer powder was pre-formed and compression molded at an elevated temperature, which resulted in bulk rigid-rod molecular composites with three-dimensionally isotropic properties. Compared to the neat mPEK homopolymer, significant increases in glass transition temperature T_g and tensile properties have been realized for the aPBT-g(mPEK) copolymers with low rod content. Taking into account the aspect ratio of the aPBT, the bulk rigid-rod molecular composite showed a tensile modulus as predicted by the Halpin-Tsai equation. In addition, x-ray scattering revealed minimal rod aggregation. However, for the copolymer of higher rod content, significant phase separation was observed in the copolymer powder, which resulted in a decrease in T_g as well as reinforcement efficiency of the bulk rigid-rod molecular composite as compared to those derived from the copolymers of low rod content. © 1992 John Wiley & Sons, Inc.     

Studies on propagating species in cationic polymerization of styrene derivatives by acetyl perchlorate or iodine. II. Salt effect on the relative reactivity in the cationic copolymerization of styrene derivatives with 2-chloroethyl vinyl ether initiated by iodine

To determine the effect of the dissociation of propagating species on the relative reactivity of monomers, 2-chloroethyl vinyl ether was copolymerized with p-methoxystyrene or with p-methylstyrene by using iodine in various solvents at 0°C. A common-ion salt (tetra-n-butylammonium iodide or tetra-n-butylammonium triiodide) was added to these copolymerization systems in a polar solvent to depress the dissociation of the propagating species. The addition of a common-ion salt increased the vinyl ether content in the copolymer. The more the dissociation of propagating species was depressed, the more the vinyl ether content in the copolymer increased. This effect of common-ion salt was in agreement with that of decreasing solvent polarity which yielded vinyl ether-rich copolymer as well. Therefore, the change of the monomer reactivity ratio by the solvent polarity, which used to be explained in terms of a selective solvation, must be reconsidered from the viewpoint of varying degrees of the dissociation of propagating species.     

Living cationic polymerization of ethyl 2-(vinyloxy)ethoxyacetate: A vinyl ether with an ether and an ester function in the pendant

Ethyl 2-(vinyloxy)ethoxyacetate ( 4 ; CH₂?CH? OCH₂CH₂OCH₂? COOC₂H₅), a vinyl ether having both carboxylic acid ester and oxyethylene unit in its pendant, afforded well-defined living polymers when polymerized by the hydrogen iodide/iodine (HI/I₂) initiating system in toluene at ?40°C. The polymers possessed a narrow molecular weight distribution (M _w/M _n ≤ 1.15), and their molecular weight (M _n) increased proportionally to monomer conversion or the molar ratio of the monomer to hydrogen iodide. The polymer molecular weight also increased upon addition of a fresh feed of the monomer to a completely polymerized reaction mixture. Polymers of high molecular weights (M _n > 5 × 10⁵) and broad molecular weight distributions were obtained by BF₃OEt₂ in toluene at ?40°C. Polymerization rate of 4 with HI/I₂ is ca. 100 times greater than that of the corresponding alkyl vinyl ether, and thus 4 was found to be one of the most reactive vinyl ethers thus far studied. Alkaline hydrolysis of the pendant ester groups of the polymers gave a vinyl ether-based polymeric carboxylic acid 6 with a narrow molecular weight distribution.     

Studies on propagating species in cationic polymerization of styrene derivatives by acetyl perchlorate or iodine. III. Effect of salt on cationic copolymerization of styrene derivatives with vinyl ethers by acetyl perchlorate

A common-ion salt, tetra-n-butylammonium perchlorate, was found to affect the monomer reactivity ratios in the cationic copolymerization by acetyl perchlorate of styrene with p-methylstyrene and of 2-chloroethyl vinyl ether with p-methylstyrene, but not those for the copolymerization of 2-chloroethyl vinyl ether with isobutyl vinyl ether. In the copolymerization of p-methylstyrene with styrene or with 2-chloroethyl vinyl ether, the addition of the common-ion salt in a polar solvent shifted the monomer reactivity ratios to those in a less polar solvent. The molecular weight distribution analysis of the copolymer suggested that the addition of the common-ion salt depresses the dissociation of propagating species. Therefore, it was concluded that a propagating species with a different degree of dissociation shows a different relative reactivity towards two monomers. The nature of propagating species was also discussed on the basis of the common-ion effect on the monomer reactivity ratios in various solvents.     

Stimuli‐responsive reversible physical networks. II. Design and properties of homogeneous physical networks consisting of periodic copolymers synthesized by living cationic polymerization

The design and precision synthesis of physical networks consisting of copolymers with crystallizable pendant groups are described in this work. Amphiphilic periodic, statistical, and gradient copolymers consisting of octadecyl vinyl ether (ODVE) units were synthesized via living cationic polymerization. The synthesis involved the copolymerization of ODVE and 2‐methoxyethyl vinyl ether (hydrophilic) with an 1‐(isobutoxy)ethyl acetate [CH₃CH(OiBu)OCOCH₃]/Et_1.5AlCl_1.5 initiating system in the presence of a weak Lewis base to yield copolymers with very narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ? 1.2). All aqueous solutions of the copolymers behaved as a viscous liquid above 50 °C. When cooled below 25 °C, the solutions turned into transparent, transient physical gels (exhibiting terminal flow), regardless of the sequence distribution. Viscoelastic studies showed that a periodic copolymer gave a hard gel that was more brittle than the gels obtained from the corresponding statistical and gradient copolymers. This difference and the differences in the relaxation time and relaxation mode distribution of the copolymer gels were consistent with the sequence distributions of ODVE in the respective copolymers. These results indicate that the mechanical properties of a physical network can be controlled by the primary polymer structures. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2712‐2722, 2005     

Synthesis and characterization of original alternated fluorinated copolymers bearing glycidyl carbonate side groups

A vinyl ether bearing a carbonate side group (2‐oxo‐1,3‐dioxolan‐4‐yl‐methyl vinyl ether, GCVE) was synthesized and copolymerized with various commercially available fluoroolefins [chlorotrifluoroethylene (CTFE), hexafluoropropylene (HFP), and perfluoromethyl vinyl ether (PMVE)] by radical copolymerization initiated by tert‐butyl peroxypivalate. Although HFP, PMVE, and vinyl ether do not homopolymerize under radical conditions, they copolymerized easily yielding alternating poly(GCVE‐alt‐F‐alkene) copolymers. These alternating structures were confirmed by elemental analysis as well as ¹H, ¹⁹F, and ¹³C NMR spectroscopy. All copolymers were obtained in good yield (73–85%), with molecular weights ranging from 3900 to 4600 g mol^?1 and polydispersities below 2.0. Their thermogravimetric analyses under air showed decomposition temperatures at 10% weight loss (T_d,10%) in the 284–330°C range. The HFP‐based copolymer exhibited a better thermal stability than those based on CTFE and PMVE. The glass transition temperatures were in the 15–65°C range. These original copolymers may find potential interest as polymer electrolytes in lithium ions batteries. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Stimuli‐responsive reversible physical networks. I. Synthesis and physical network properties of amphiphilic block and random copolymers with long alkyl chains by living cationic polymerization

The living cationic polymerization of octadecyl vinyl ether (ODVE) was achieved with an 1‐(isobutoxy)ethyl acetate [CH₃CH(OiBu)OCOCH₃]/EtAlCl₂ initiating system in hexane in the presence of an added weak Lewis base at 30 °C. In contrast to conventional polymers, poly(octadecyl vinyl ether) underwent upper‐critical‐solution‐temperature‐type phase separation in various solvents, such as hexane, toluene, CH₂Cl₂, and tetrahydrofuran, because of the crystallization of octadecyl chains. Amphiphilic block and random copolymers with crystallizable substituents of ODVE and 2‐methoxyethyl vinyl ether (MOVE) were synthesized via living cationic polymerization under similar conditions. Aqueous solutions of the copolymers yielded physical gels upon cooling because of strong interactions between ODVE units, regardless of the copolymer structure. The product gels, however, exhibited different viscoelastic properties: A 20 wt % solution of a block copolymer (400/20 MOVE/ODVE) became a soft physical gel that behaved like a typical gel, whereas the corresponding random copolymer gave a transparent but stiff gel with a certain relaxation time. Differential scanning calorimetry analysis confirmed that the crystalline–amorphous transition of the octadecyl chains was a key step for inducing such physical gelation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1155–1165, 2005     

Synthesis and characterization of maleimide polymers with pendant pyrazole groups. IV. Copolymerization of pyrazole-modified maleimides with vinyl ethers

The synthesis of maleimides that have pyrazolic or bipyrazolic pendant groups is described. Their homopolymerization and their copolymerization with 2-chloroethyl vinyl ether (CEVE) is reported. The homopolymerizations of such maleimides were performed under various conditions and led to low molecular-weight polymers. However, alternating copolymers were obtained from CEVE as comonomers whatever the monomers feed compositions. A similar behavior was also observed for maleimides that do not exhibit any spacer, whereas for bulky vinyl ethers, random copolymers were produced. A comparison of the thermal behavior between these copolymers (glass transition temperatures, T_g, and decomposition temperatures) and other copolymers having different spacers between the nitrogenated cycles and the chain are related. Thus, an important decrease of T_g, was observed when C₃H₆CO₂CH₂ groups were used as the spacer instead of methylene groups. Moreover, the thermal weakness of these copolymers may come from the substituents of the vinyl ether and is discussed. © 1994 John Wiley & Sons, Inc.     

Cationic copolymerization of phenyl propenyl ethers

Ring-substituted phenyl propenyl ethers were found to form homopolymers without any rearrangement by metal halides. Phenyl propenyl ethers were less reactive than the corresponding phenyl vinyl ethers in cationic polymerization. In order to study the electronic effect of a substituent on the reactivity, cis-p-Cl,p-CH₃, and p-CH₃O-phenyl propenyl ethers were copolymerized with phenyl propenyl ether in methylene chloride at ?78°C with stannic chloride–trichloroacetic acid, and their ¹H- and ¹³C-NMR spectra were measured. The reaction constant ρ against Hammett σ_p was ?2.1. The cis-phenyl propenyl ethers were slightly more reactive than the corresponding trans isomers. On the other hand, an o-methyl group decreased the reactivity of phenyl propenyl ether. The low reactivity of o-methyl phenyl propenyl ether was attributed to the steric hindrance between the propagating carbocation and the monomer.     

Photoisomerization of AZO Aromatic Chromophobes in Polyvinyl Chloride

Abstract

The synthesis and characterization of new vinyl chloride-p-acryloyloxyazobenzene copolymers are reported. Kinetics of photoinduced trans-cis and thermal cis-trans isomerization of azo pendant groups in copolymer have also been investigated, and the kinetic parameters were evaluated. An azo acrylate model compound was used for comparison.     

Thermosensitive polyalcohols: Synthesis via living cationic polymerization of vinyl ethers with a silyloxy group

Thermosensitive homopolymers and copolymers with hydroxy groups were synthesized via the living cationic polymerization of Si‐containing vinyl ethers. The cationic homopolymerization and copolymerization of five vinyl ethers with silyloxy groups, each with a different spacer length, were examined with a cationogen/Et_1.5AlCl_1.5 initiating system in the presence of an added base. When an appropriate base was added, the living cationic polymerization of Si‐containing monomers became feasible, giving polymers with narrow molecular weight distributions and various block copolymers. Subsequent desilylation gave well‐defined polyalcohols, in both water‐soluble and water‐insoluble forms. One of these polyalcohols, poly(4‐hydroxybutyl vinyl ether), underwent lower‐critical‐solution‐temperature‐type thermally induced phase separation in water at a critical temperature (T_PS) of 42 °C. This phase separation was quite sensitive and reversible on heating and cooling. The phase separation also occurred sensitively with random copolymers of thermosensitive and hydrophilic or hydrophobic units, the T_PS values of which in water could be controlled by the monomer feed ratio. The thermal responsiveness of this polyalcohol unit made it possible to prepare novel thermosensitive block and random copolymers consisting solely of alcohol units. One example prepared in this study was a 20 wt % aqueous solution of a diblock copolymer consisting of thermosensitive poly(4‐hydroxybutyl vinyl ether) and water‐soluble poly(2‐hydroxyethyl vinyl ether) segments, which transformed into a physical gel above 42 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3300–3312, 2003