Organometallic Rotaxanes with a Triazole Group in the Axle Component and Their Behavior as Ligands of PtII Complexes

Two ferrocenylmethyl ammonium salts were used as axle components of pseudorotaxanes with dibenzo[24]crown‐8. The pseudorotaxane with an alkyne terminal group in the axle component underwent a Cu‐catalyzed Huisgen coupling reaction (click reaction) with an alkyl azide to afford cationic [2]rotaxanes with a triazole group in the axle molecule. The rotaxane reacted with Ac₂O to produce neutral rotaxanes with an amide group in the axle component. Both cationic and neutral rotaxanes were treated with K[PtCl₃(CH₂?CH₂)] to form the Pt^II‐containing rotaxanes.     

Cationic and Neutral Rotaxanes Having Different Functional Groups in the Axle Molecule and Their Coordination to PtII

Dibenzo[24]crown‐8 (DB24C8) forms rotaxanes with a linear molecule having a dialkylammonium group and a triazole group as well as with the acetylation product of a cationic axle molecule. The former cationic rotaxane is stabilized by multiple intermolecular hydrogen bonds between the NH₂⁺ and oxyethylene groups. The neutral rotaxane contains the macrocycle in the vicinity of the terminal aryl group. The co‐conformation of both the cationic and neutral rotaxanes can be fixed by coordination of the triazole group of the axle molecule to PtCl₂(dmso)₂. A ¹H NMR spectroscopic study on the thermodynamics of the Pt coordination revealed a larger association constant for the rotaxanes than for the corresponding axle molecules and a larger value for the neutral rotaxane than for the cationic rotaxane.     

Sequential O- and N-acylation protocol for high-yield preparation and modification of rotaxanes: synthesis, functionalization, structure, and intercomponent interaction of rotaxanes

A pseudorotaxane consisting of a 24-membered crown ether and secondary ammonium salt with the hydroxy group at the terminus was quantitatively acylated by bulky acid anhydride in the presence of tributylphosphane as catalyst to afford the corresponding rotaxane in high yield. Large-scale synthesis without chromatographic separation was easily achieved. The ammonium group in the resulting rotaxane was quantitatively acylated with excess electrophile in the presence of excess trialkylamine. Various N-functionalized rotaxanes were prepared by this sequential double-acylation protocol. 1H NMR spectra and X-ray crystallographic analyses of the rotaxanes showed that the crown ether component was captured on the ammonium group in ammonium-type rotaxane by strong hydrogen-bonding intercomponent interaction. The conformation around the ammonium group was fixed by the hydrogen-bonding interaction. Meanwhile, the conformation of the amide-type rotaxane was determined by the weak CH/pi interaction between the methylene group in crown ether and the benzene ring of the axle component. The N-acylation of ammonium-type rotaxane is useful for the preparation of both functionalized rotaxanes and weak intercomponent interaction-based rotaxanes.     

Synthesis of [1]rotaxane via covalent bond formation and its unique fluorescent response by energy transfer in the presence of lithium ion

Although there have been a lot of reports on the synthesis and properties of [n]rotaxanes (mainly n = 2), only a few reports on the synthesis of [1]rotaxane has been published by V?gtle's group and others (see ref 5). Generally speaking, [1]rotaxane might be expected to exhibit properties different from other rotaxanes, because the rotor and the axle in the [1]rotaxane is bound covalently and closely. We report on a novel method to make [1]rotaxanes via covalent bond formation from a macrocyclic compound. That is, we first prepared a bicyclic compound from macrocycle and then proceeded to [1]rotaxane by aminolysis. This is the first synthetic example of preparation of [1]rotaxane via covalent bond formation, not utilizing weak interactions such as hydrogen bonding, charge transfer, via metal complexation, etc. This method might provide a powerful and new tool for construction of [1]rotaxane as a new supramolecular system. In addition, we investigated energy transfer from rotor to axle using [1]rotaxane that we prepared. Energy transfer occurred perfectly from the naphthalene ring of the rotor to the anthracene ring of the axle. We found also that only lithium ion among alkali ions can drastically enhance the fluorescence intensity. This finding could be applicable to ion-sensing systems, switching devices, and so on.     

A self-threaded "molecular 8"

A new type of [1]rotaxanes containing two aliphatic bridges between axle and wheel is obtained in 39% yield in a one-step synthesis starting from a [2]rotaxane which contained one sulfonamide group each in both the wheel and the axle. Temperature controlled chemoselective substitution reactions first at these sulfonamide nitrogens and then subsequently at the various other carboxamide nitrogens in the wheel and axle give rise to the formation of an isomeric mixture of three double-bridged [1]rotaxanes which could be separated by HPLC. Structure determination of the main product 3a was possible by NMR experiments supported by molecular modeling calculations. Using different reaction conditions, a double-substituted but not yet bridged [2]rotaxane 4 could be isolated as an intermediate giving further evidence for the assigned structure of 3a and the way of its formation. The shape of this double-bridged [1]rotaxane 3a reminds of a self-intertwining chiral "molecular 8", in which any possible racemization due to deslipping is hindered by the two stoppers originating from the former rotaxane axle. Hence, to the best of our knowledge this is the first example of a molecule in which both concepts, cycloenantiomerism and helical chirality, are realised in one structure. Enantiomer separation of the main product was possible by further HPLC using chiral stationary phases. The Cotton effects of the circular dichrograms are different to those of the already synthesized [1]rotaxanes bearing just one aliphatic bridge between axle and wheel.     

Hydroxy Groups Enhance [2]Rotaxane Anion Binding Selectivity

We report the synthesis of two [2]rotaxanes containing an interlocked three dimensional binding cavity formed from a pyridinium bis(amide) axle component containing two phenol donors, and an isophthalamide based macrocycle. In the competitive solvent mixture 1 : 1 CDCl₃ : CD₃OD, one of the receptors exhibits a much higher selectivity preference for chloride than an analogous rotaxane without the hydroxy groups. X-ray crystal structures reveal the chloride anion guest encapsulated within the interlocked binding cavity, though not all of the hydrogen bond donors are utilised. Computational semi-empirical simulations indicate that secondary intermolecular interactions occur between the axle hydroxy hydrogen bond donors and the [2]rotaxane macrocycle components, contributing to a more preorganised binding pocket, which may be responsible for the observed enhanced selectivity.     

Rotaxanes and pseudorotaxanes with Fe-, Pd- and Pt-containing axles. Molecular motion in the solid state and aggregation in solution

This article reviews our recent studies on structure and properties of rotaxanes and pseudorotaxanes with Fe-, Pd- and Pt-containing complexes as the axle component. Electrochemical oxidation of ferrocenylmethylamine in the presence of a hydrogen radical precursor induces formal protonation of the amino group and produces a pseudorotaxane of the resulting ammonium species with a crown ether. Single crystals of the ferrocene-containing pseudorotaxane undergo a thermal crystalline phase transition accompanied by changes in the optical properties of the crystals. X-Ray crystallographic studies of the low- and high-temperature phases revealed different intermolecular interactions and orientations of the aromatic rings in the crystalline state depending on the temperature. End-capping of the ferrocene-containing [2]pseudorotaxane using a cross-metathesis reaction yields [2]rotaxane under mild conditions. A rotaxane having a platinum-carboxylate complex as its axle is converted into related organic and inorganic rotaxanes by partial dissociation of the Pt-O bond. An N-alkylbipyridinium forms [3]pseudorotaxane with alpha-cyclodextrin (alpha-CD), and it reacts with platinum and palladium complexes to form the corresponding [5]rotaxanes containing four alpha-cyclodextrin moieties. Complexes without alpha-CD components form micelles in aqueous solution, while the addition of alpha-CD causes degradation of the micelles and the formation of rotaxanes.     

Asymmetric benzoin condensation catalyzed by chiral rotaxanes tethering a thiazolium salt moiety via the cooperation of the component: can rotaxane be an effective reaction field?

Although some reactions on rotaxanes have been reported, the characteristic features of the rotaxanes providing unique reaction fields have hardly been studied, especially as catalyst. In our continuous studies on interlocked molecules such as rotaxanes and catenanes, we have noticed the importance of such interlocked structures with high freedom in functionalized materials such as molecular catalyst. For catalytic asymmetric benzoin condensations, two optically active rotaxanes possessing thiazolium salt moieties were prepared using the binaphthyl group as the chiral auxiliary. The benzoin condensations of aromatic aldehydes catalyzed by the chiral rotaxanes as catalysts gave optically active benzoins with ca. 30% ee in moderate to high chemical yields depending upon the structure of rotaxane and the reaction conditions employed. From the results, two intrarotaxane chirality transfers are confirmed: (i) through-space chirality transfer from wheel to axle and (ii) through-bond chirality transfer controlled with an achiral wheel. Because these asymmetric reaction fields are specific to the rotaxane structure, the importance and possibility of the "rotaxane field" as a particular reaction field is demonstrated in this work.     

Halotriazolium Axle Functionalised [2]Rotaxanes for Anion Recognition: Investigating the Effects of Halogen‐Bond Donor and Preorganisation

The anion‐templated synthesis of three novel halogen‐bonding 5‐halo‐1,2,3‐triazolium axle containing [2]rotaxanes is described, and the effects of altering the nature of the halogen‐bond donor atom together with the degree of inter‐component preorganisation on the anion‐recognition properties of the interlocked host investigated. The ability of the bromotriazolium motif to direct the halide‐anion‐templated assembly of interpenetrated [2]pseudorotaxanes was studied initially; bromide was found to be the most effective template. As a consequence, bromide anion templation was used to synthesise the first bromotriazolium axle containing [2]rotaxane, the anion‐binding properties of which, determined by ¹H NMR spectroscopic titration experiments, revealed enhanced bromide and iodide recognition relative to a hydrogen‐bonding protic triazolium rotaxane analogue. Two halogen‐bonding [2]rotaxanes with bromo‐ and iodotriazolium motifs integrated into shortened axles designed to increase inter‐component preorganisation were also synthesised. Anion ¹H NMR spectroscopic titration experiments demonstrated that these rotaxanes were able to bind halide anions even more strongly, with the iodotriazolium axle integrated rotaxane capable of recognising halides in aqueous solvent media. Importantly, these observations suggest that a halogen‐bonding interlocked host binding domain, in combination with increased inter‐component preorganisation, are requisite design features for a potent anion receptor.     

1]rotaxanes and pretzelanes: synthesis, chirality, and absolute configuration [In Process Citation

The synthesis of aliphatically bridged [1](n)rotaxanes and (n)pretzelanes in preparative yields and the dependency of their chiroptical properties on the length (n) of their bridge are reported. A cycloenantiomeric bis(sulphonamide)[2]rotaxane with a sulphonamide group in its axle and its wheel was intramolecularly dialkylated by homologous bifunctional oligomethylene reagents to form chiral [1](n)rotaxanes bearing bridges of different lengths (n) between the axle and the wheel. Intramolecular dialkylation by 1,omega-dibromoalkanes of a topologically chiral bis(sulphonamide)[2]catenane with a sulphonamide group in both of the macrolactam rings leads to pretzel shaped molecules ((n)pretzelanes) with homologous bridges between the two macrocycles. Their yields decrease with decreasing length of the bridge. The shortest bridge isolated so far in reasonable amounts consists of six methylene groups ((6)pretzelane). Remarkably, a covalent connection of axle and wheel in a [2]rotaxane was successful even with much shorter bridges-down to only three methylene groups ([1](3)rotaxane). The structural changes of the [1](n)rotaxanes with decreasing bridge length is expressed by an increasing high-field shift in the 1H NMR spectra. Enantiomeric resolution of the racemates of both series was achieved in seven cases for the [1](n)rotaxanes and two for the (n)pretzelanes by use of chiral HPLC columns. The circular dichrograms of both compound families show a strong dependency on the length of the bridge. However, the shortest bridges displayed some additional unexpected deviations. A new specification of the absolute configuration of supramolecules, such as [n]catenanes, [n]rotaxanes and (n)pretzelanes is introduced together with some nomenclature additions.     

Light-harvesting in multichromophoric rotaxanes

Two rotaxanes with benzyl ether axles and tetralactam wheels were synthesized through an anion template effect. They carry naphthalene chromophores attached to the stopper groups and a pyrene chromophore attached to the wheel. The difference between the two rotaxanes is represented by the connecting unit of the naphthyl chromophore to the rotaxane axle: a triazole or an alkynyl group. Both rotaxanes exhibit excellent light-harvesting properties: excitation of the naphthalene chromophores is followed by energy transfer to the pyrene unit with efficiency higher than 90% in both cases. This represents an example of light-harvesting function among chromophores belonging to mechanically interlocked components, that is, the axle and the wheel of the rotaxanes.     

Rational Design for Rotaxane Synthesis through Intramolecular Slippage: Control of Activation Energy by Rigid Axle Length

We describe a new concept for rotaxane synthesis through intramolecular slippage using π‐conjugated molecules as rigid axles linked with organic soluble and flexible permethylated α‐cyclodextrins (PM α‐CDs) as macrocycles. Through hydrophilic–hydrophobic interactions and flipping of PM α‐CDs, successful quantitative conversion into rotaxanes was achieved without covalent bond formation. The rotaxanes had high activation barrier for their de‐threading, so that they were kinetically isolated and derivatized even under conditions unfavorable for maintaining the rotaxane structures. ¹H NMR spectroscopy experiments clearly revealed that the restricted motion of the linked macrocycle with the rigid axle made it possible to control the kinetic stability by adjusting the length of the rigid axle in the precursor structure rather than the steric bulkiness of the stopper unit.     

Effects of Axle‐Core,Macrocycle, and Side‐Station Structures on the Threading and Hydrolysis Processes of Imine‐Bridged Rotaxanes

Imine‐bridged rotaxanes are a new type of rotaxane in which the axle and macrocyclic ring are connected by imine bonds. We have previously reported that in imine‐bridged rotaxane 5 , the shuttling motion of the macrocycle could be controlled by changing the temperature. In this study, we investigated how the axle and macrocycle structures affect the construction of the imine‐bridged rotaxane as well as the dynamic equilibrium between imine‐bridged rotaxane 5 and [2]rotaxane 7 by using various combinations of axles ( 1 A , B ), macrocycles ( 2 a – e ), and side‐stations (XYL and TEG). In the threading process, the flexibility of the macrocycle and the substituent groups at the para position of the aniline moieties affect the preparation of the threaded imines. The size of the imine‐bridging station and the macrocyclic tether affects the hydrolysis of the imine bonds under acidic conditions.     

Halogen-Bonding Strapped Porphyrin BODIPY Rotaxanes for Dual Optical and Electrochemical Anion Sensing

Anion receptors employing two distinct sensory mechanisms are rare. Herein, we report the first examples of halogen-bonding porphyrin BODIPY [2]rotaxanes capable of both fluorescent and redox electrochemical sensing of anions. ¹H NMR, UV/visible and electrochemical studies revealed rotaxane axle triazole group coordination to the zinc(II) metalloporphyrin-containing macrocycle component, serves to preorganise the rotaxane binding cavity and dramatically enhances anion binding affinities. Mechanically bonded, integrated-axle BODIPY and macrocycle strapped metalloporphyrin motifs enable the anion recognition event to be sensed by the significant quenching of the BODIPY fluorophore and cathodic perturbations of the metalloporphyrin P/P^+. redox couple.     

Calix[4]arene‐Based Rotaxane Host Systems for Anion Recognition

The synthesis, structure and anion binding properties of the first calix[4]arene‐based [2]rotaxane anion host systems are described. Rotaxanes 9? Cl and 12? Cl, consisting of a calix[4]arene functionalised macrocycle wheel and different pyridinium axle components, are prepared via adaption of an anion templated synthetic strategy to investigate the effect of preorganisation of the interlocked host’s binding cavity on anion binding. Rotaxane 12? Cl contains a conformationally flexible pyridinium axle, whereas rotaxane 9? Cl incorporates a more preorganised pyridinium axle component. The X‐ray crystal structure of 9? Cl and solution phase ¹H NMR spectroscopy demonstrate the successful interlocking of the calix[4]arene macrocycle and pyridinium axle components in the rotaxane structures. Following removal of the chloride anion template, anion binding studies on the resulting rotaxanes 9? PF₆ and 12? PF₆ reveal the importance of preorganisation of the host binding cavity on anion binding. The more preorganised rotaxane 9? PF₆ is the superior anion host system. The interlocked host cavity is selective for chloride in 1:1 CDCl₃/CD₃OD and remains selective for chloride and bromide in 10 % aqueous media over the more basic oxoanions. Rotaxane 12? PF₆ with a relatively conformationally flexible binding cavity is a less effective and discriminating anion host system although the rotaxane still binds halide anions in preference to oxoanions.     

2]Rotaxanes containing pyridinium-phosphonium axles and 24-crown-8 ether wheels

A triethylphosphonium group attached to a pyridinium ethane moiety can be used as an axle for the self-assembly of [2]pseudorotaxanes and [2]rotaxanes. Although [2]pseudorotaxane formation is limited due to the bulk of the PR4+ group, [2]rotaxanes can be formed utilising 24-crown-8 ether, benzo-24-crown-8 ether and naphtho-24-crown-8 ether. The synthesis of these [2]rotaxanes and the X-ray structure of the [2]rotaxane containing a 24-crown-8 ether wheel are described. When the crown ether contains an aromatic group two possible conformational isomers exist; these are identified at low temperature by 1H and 31P NMR spectroscopy.     

Synthesis of [3]Rotaxanes that Utilize the Catalytic Activity of a Macrocyclic Phenanthroline–Cu Complex: Remarkable Effect of the Length of the Axle Precursor

[3]Rotaxanes, which consist of one macrocyclic phenanthroline compound and two axle components, were prepared by the oxidative dimerization of an alkyne compound with bulky tris[4′‐cyclohexyl‐(1,1′‐biphenyl)‐4‐yl]methyl blocking group. The catalytic activity of a macrocyclic phenanthroline–Cu complex was utilized to thread the two axle components inside the ring. The alkyne compound with chain of 15 or 20 methylene groups gave [3]rotaxanes in high yields, whereas the axle with a chain of six methylene groups afforded a [3]rotaxane in very poor yield. We also examined the effect of the ring size on the synthesis of [3]rotaxanes. [3]Rotaxanes were not isolated when a macrocyclic phenanthroline compound with a smaller ring size was used.     

Pseudorotaxanes and rotaxanes from macrocyclic rings incorporating acridinone, 9-phenylacridinium and 9-phenyl-9-methoxy-acridane moieties

Two novel crown ethers incorporating the acridinone and the 9-phenyl-9-methoxy-acridane unit were used to form pseudorotaxanes with the 1,2-bis(4,4′dipyridinium)ethane axle, which are stoppered by the alkylative method to form rotaxanes. The pseudorotaxane formed from the acridane-containing crown was photochemically converted to the corresponding acridinium methoxide thereby releasing the guest. The acridane-containing rotaxane could not be isolated because the preparation conditions formed the acridinium salt.     

Cyclodextrin‐Based Size‐Complementary [3]Rotaxanes: Selective Synthesis and Specific Dissociation

α‐Cyclodextrin (CD)‐based size‐complementary [3]rotaxanes with alkylene axles were prepared in one‐pot by end‐capping reactions with aryl isocyanates in water. The selective formation of [3]rotaxane with a head‐to‐head regularity was indicated by the X‐ray structural analyses. Thermal degradation of the [3]rotaxanes bearing appropriate end groups proceeded by stepwise dissociation to yield not only the original components but also [2]rotaxanes. From the kinetic profiles of the deslippage, it turned out that the maximum yield of [2]rotaxane was estimated to be 94 %. Thermodynamic studies and NOESY analyses of such rotaxanes revealed that [2]rotaxanes are specially stabilized, and that the dissociation capability of the [3]rotaxanes to the components can be adjusted by controlling the structure of the end groups, direction of the CD groups, and length of the alkylene axle.     

Molecular dynamics study of 2rotaxanes: influence of solvation and cation on co-conformation

The conformational preference of a [2]rotaxane system has been examined by molecular dynamics simulations. The rotaxane wheel consists of two bridged binding components: a cis-dibenzo-18-crown-6 ether and a 1,3-phenyldicarboxamide, and the penetrating axle consists of a central isophthaloyl unit with phenyltrityl capping groups. The influence of solvation on the co-conformation of the [2]rotaxane was evaluated by comparing the conformational flexibility in two solvents: chloroform and dimethyl sulfoxide. Attention was also paid to the effect of cation binding on the dynamical properties of the [2]rotaxane. The conformational stability of the [2]rotaxane was calculated using a MM/PB-SA strategy, and the occurrence of specific motions was examined by essential dynamics analysis. The changes in the co-conformational properties in the two solvents and upon cation binding are discussed in light of the available NMR data. The results indicate that in chloroform solution the [2]rotaxane system exists as a mixture of co-conformational states including some that have hydrogen bonds between axle C=O and wheel NH groups. Analysis of the simulations allow us to hypothesize that the [2]rotaxane's circumrotation motion can occur as the result of a dynamic process that combines a preliminary axle sliding step that breaks these hydrogen bonds and a conformational change in the ester group more distant from the wheel. In contrast, no hydrogen-bonded co-conformation was found in dimethyl sulfoxide, which appears to be due to the preferential formation of hydrogen bonds between the wheel NH groups with solvent molecules. Moreover, the axle experiences notable changes in anisotropic shielding, which would explain why the NMR signals are broadened in this solvent. Insertion of a sodium cation into the crown ether reduces co-conformational flexibility due to an interaction of the axle with the cation. Overall, the results reveal how both solvent and ionic atmosphere can influence the co-conformational preferences of rotaxanes.