Rapid and Modular Access to Vinyl Cyclopropanes Enabled by Air-stable Palladium(I) Dimer Catalysis

While vinyl cyclopropanes are valuable functional groups in drugs or natural products as well as established precursors to trigger a rich variety of synthetic transformations, their reactive nature can make their installation via direct catalytic approaches challenging. We herein present a modular access to (di)vinyl cyclopropanes under very mild conditions and full conservation of stereochemistry, allowing access to the cis or trans cyclopropane- as well as E or Z vinyl-stereochemical relationships. Our protocol relies on air-stable dinuclear Pd^I catalysis, which enables rapid (<30 min) and selective access to a diverse range of vinyl cyclopropane motifs at room temperature, even on gram scale.     

Synthesis of thiol-modified peptide nucleic acids designed for post-assembly conjugation reactions

Two orthogonally protected PNA monomers were prepared having the mercaptomethyl moiety attached to the PNA backbone. These building blocks were employed in solid-phase PNA synthesis and it was shown that Boc/S-p-methoxybenzyl protection scheme was only satisfactory for the introduction of N-terminal thiol modification while the Fmoc/S-butylthio protected monomer proved to be amenable to elongation. The mercaptomethyl modification did not influence the thermal stability of a PNA/RNA duplex. The feasibility of PNA-PNA native ligation was demonstrated.     

Structurally Defined Molecular Hypervalent Iodine Catalysts for Intermolecular Enantioselective Reactions

Molecular structures of the most prominent chiral non‐racemic hypervalent iodine(III) reagents to date have been elucidated for the first time. The formation of a chirally induced supramolecular scaffold based on a selective hydrogen‐bonding arrangement provides an explanation for the consistently high asymmetric induction with these reagents. As an exploratory example, their scope as chiral catalysts was extended to the enantioselective dioxygenation of alkenes. A series of terminal styrenes are converted into the corresponding vicinal diacetoxylation products under mild conditions and provide the proof of principle for a truly intermolecular asymmetric alkene oxidation under iodine(I/III) catalysis.     

Multi-Electron Reactions Enabled by Anion-Based Redox Chemistry for High-Energy Multivalent Rechargeable Batteries

The development of multivalent metal (such as Mg and Ca) based battery systems is hindered by lack of suitable cathode chemistry that shows reversible multi-electron redox reactions. Cationic redox centres in the classical cathodes can only afford stepwise single-electron transfer, which are not ideal for multivalent-ion storage. The charge imbalance during multivalent ion insertion might lead to an additional kinetic barrier for ion mobility. Therefore, multivalent battery cathodes only exhibit slope-like voltage profiles with insertion/extraction redox of less than one electron. Taking VS₄ as a model material, reversible two-electron redox with cationic–anionic contributions is verified in both rechargeable Mg batteries (RMBs) and rechargeable Ca batteries (RCBs). The corresponding cells exhibit high capacities of >300 mAh g⁻¹ at a current density of 100 mA g⁻¹ in both RMBs and RCBs, resulting in a high energy density of >300 Wh kg⁻¹ for RMBs and >500 Wh kg⁻¹ for RCBs. Mechanistic studies reveal a unique redox activity mainly at anionic sulfides moieties and fast Mg²⁺ ion diffusion kinetics enabled by the soft structure and flexible electron configuration of VS₄.     

Synthesis of Intrinsically Disordered Fluorinated Peptides for Modular Design of High-Signal 19F MRI Agents

¹⁹F MRI is valuable for in vivo imaging due to the only trace amounts of fluorine in biological systems. Because of the low sensitivity of MRI however, designing new fluorochemicals remains a significant challenge for achieving sufficient ¹⁹F signal. Here, we describe a new class of high-signal, water-soluble fluorochemicals as ¹⁹F MRI imaging agents. A polyamide backbone is used for tuning the proteolytic stability to avoid retention within the body, which is a limitation of current state-of-the-art perfluorochemicals. We show that unstructured peptides containing alternating N-ϵ-trifluoroacetyllysine and lysine provide a degenerate ¹⁹F NMR signal. ¹⁹F MRI phantom images provide sufficient contrast at micromolar concentrations, showing promise for eventual clinical applications. Finally, the degenerate high signal characteristics were retained when conjugated to a large protein, indicating potential for in vivo targeting applications, including molecular imaging and cell tracking.     

InCl3-Catalyzed,Three-Component Reactions for the Synthesis of Some Novel Functionalized/Annulated Barbituric Acids

Some novel 5-aminoalkylbarbituric acids and corresponding chromene derivatives were synthesized via a one-pot, three-component Mannich reaction starting from 1,3-dimethylbarbituric acid, arylaldehydes, and amines.     

Armor-like Inorganic-rich Cathode Electrolyte Interphase Enabled by the Pentafluorophenylboronic Acid Additive for High-voltage Li||NCM622 Batteries

Lithium metal batteries (LMBs) comprising Li metal anode and high-voltage nickel-rich cathode could potentially realize high capacity and power density. However, suitable electrolytes to tolerate the oxidation on the cathode at high cut-off voltage are urgently needed. Herein, we present an armor-like inorganic-rich cathode electrolyte interphase (CEI) strategy for exploring oxidation-resistant electrolytes for sustaining 4.8 V Li||LiNi_0.6Co_0.2Mn_0.2O₂ (NCM622) batteries with pentafluorophenylboronic acid (PFPBA) as the additive. In such CEI, the armored lithium borate surrounded by CEI up-layer represses the dissolution of inner CEI moieties and also improves the Li⁺ conductivity of CEI while abundant LiF is distributed over whole CEI to enhance the mechanical stability and Li⁺ conductivity compared with polymer moieties. With such robust Li⁺ conductive CEI, the Li||NCM622 battery delivered excellent stability at 4.6 V cut-off voltage with 91.2 % capacity retention after 400 cycles. The excellent cycling performance was also obtained even at 4.8 V cut-off voltage.     

Application of solid phase peptide synthesis to engineering PEO–peptide block copolymers for drug delivery

This work describes a simple, versatile solid-phase peptide-synthesis (SPPS) method for preparing micelle-forming poly(ethylene oxide)-block-peptide block copolymers for drug delivery. To demonstrate its utility, this SPPS method was used to construct two series of micelle-forming block copolymers (one of constant core-composition and variable length; the other of constant core length and variable composition). The block copolymers were then used to study in detail the effect of size and composition on micellization. The various block copolymers were prepared by a combination of SPPS for the peptide block, followed by solution–phase conjugation of the peptide block with a proprionic acid derivative of poly(ethylene oxide) (PEO) to form the PEO-b-peptide block copolymer. The composition of each block component was characterized by mass spectrometry (MALDI and ES-MS). Block copolymer compositions were characterized by ¹H NMR. All the block copolymers were found to form micelles as judged by transmission electron microscopy (TEM) and light scattering analysis. To demonstrate their potential as drug delivery systems, micelles prepared from one member of the PEO-b-peptide block copolymer series were physically loaded with the anticancer drug doxorubicin (DOX). Micelle static and dynamic stability were found to correlate strongly with micelle core length. In contrast, these same micellization properties appear to be a complex function of core composition, and no clear trends could be identified from among the set of compositionally varying, fixed length block copolymer micelles. We conclude that SPPS can be used to construct biocompatible block copolymers with well-defined core lengths and compositions, which in turn can be used to study and to tailor the behavior of block copolymer micelles.     

Multi‐Electron Reactions Enabled by Anion‐Based Redox Chemistry for High‐Energy Multivalent Rechargeable Batteries

The development of multivalent metal (such as Mg and Ca) based battery systems is hindered by lack of suitable cathode chemistry that shows reversible multi‐electron redox reactions. Cationic redox centres in the classical cathodes can only afford stepwise single‐electron transfer, which are not ideal for multivalent‐ion storage. The charge imbalance during multivalent ion insertion might lead to an additional kinetic barrier for ion mobility. Therefore, multivalent battery cathodes only exhibit slope‐like voltage profiles with insertion/extraction redox of less than one electron. Taking VS₄ as a model material, reversible two‐electron redox with cationic–anionic contributions is verified in both rechargeable Mg batteries (RMBs) and rechargeable Ca batteries (RCBs). The corresponding cells exhibit high capacities of >300 mAh g^?1 at a current density of 100 mA g^?1 in both RMBs and RCBs, resulting in a high energy density of >300 Wh kg^?1 for RMBs and >500 Wh kg^?1 for RCBs. Mechanistic studies reveal a unique redox activity mainly at anionic sulfides moieties and fast Mg²⁺ ion diffusion kinetics enabled by the soft structure and flexible electron configuration of VS₄.     

Construction of peptide-vehicles,bioconjugates having modules for cancer cell surface capture and cell-penetrating peptide with anticancer agents

Recently molecular targeting therapy has been applied to cancer chemotherapy, although in some cases side-effects are not negligible. Based on our bio-detection concept, that is, protein–protein interaction can be mimicked by using peptides, a novel cell-targeting concept designated peptide-vehicle has been proposed, which has conjugates consisting of the cancer cell recognition and cell penetrating peptides with anticancer drugs. The cancer cell surface protein can be captured by a cyclotide, containing protease resistant d-cystine. A library of cell penetrating peptides has been prepared and conjugated to the cyclotide. Anticancer molecules were recovered after clinical use, which were pooled, purified, and derivatized for loading into the vehicle. The present Letter describes construction of peptide-vehicles, bioconjugates focusing on more efficiency and cancer cell selective delivery for anticancer drugs.     

Weak Intermolecular Hydrogen Bonds with Fluorine: Detection and Implications for Enzymatic/Chemical Reactions,Chemical Properties,and Ligand/Protein Fluorine NMR Screening

It is known that strong hydrogen‐bonding interactions play an important role in many chemical and biological systems. However, weak or very weak hydrogen bonds, which are often difficult to detect and characterize, may also be relevant in many recognition and reaction processes. Fluorine serving as a hydrogen‐bond acceptor has been the subject of many controversial discussions and there are different opinions about it. It now appears that there is compelling experimental evidence for the involvement of fluorine in weak intramolecular or intermolecular hydrogen bonds. Using established NMR methods, we have previously characterized and measured the strengths of intermolecular hydrogen‐bond complexes involving the fluorine moieties CH₂F, CHF₂, and CF₃, and have compared them with the well‐known hydrogen‐bond complex formed between acetophenone and the strong hydrogen‐bond donor p‐fluorophenol. We now report evidence for the formation of hydrogen bonds involving fluorine with significantly weaker donors, namely 5‐fluoroindole and water. A simple NMR method is proposed for the simultaneous measurement of the strengths of hydrogen bonds between an acceptor and a donor or water. Important implications of these results for enzymatic/chemical reactions involving fluorine, for chemical and physical properties, and for ligand/protein ¹⁹F NMR screening are analyzed through experiments and theoretical simulations.     

Bifunctional Guanidine via an Amino Amide Skeleton for Asymmetric Michael Reactions of β‐Ketoesters with Nitroolefins: A Concise Synthesis of Bicyclic β‐Amino Acids

Two activations are better than one : The chiral bifunctional guanidine 1 , which features an amino amide backbone, catalyzes the asymmetric Michael addition of a range of substrates and gives products with excellent stereoselectivities. The method also allows the efficient synthesis of optically pure β‐amino acid esters. Both the guanidine group and the NH proton of the amide were important for the dual activation.

     

A New Class of Modular P,N‐Ligand Library for Asymmetric Pd‐Catalyzed Allylic Substitution Reactions: A Study of the Key Pd–π‐Allyl Intermediates

A new class of modular P,N‐ligand library has been synthesized and screened in the Pd‐catalyzed allylic substitution reactions of several substrate types. These series of ligands can be prepared efficiently from easily accessible hydroxyl–oxazole/thiazole derivatives. Their modular nature enables the bridge length, the substituents at the heterocyclic ring and in the alkyl backbone chain, the configuration of the ligand backbone, and the substituents/configurations in the biaryl phosphite moiety to be easily and systematically varied. By carefully selecting the ligand components, therefore, high regio‐ and enantioselectivities (ee values up to 96 %) and good activities are achieved in a broad range of mono‐, di‐, and trisubstituted linear hindered and unhindered substrates and cyclic substrates. The NMR spectroscopic and DFT studies on the Pd–π‐allyl intermediates provide a deeper understanding of the effect of ligand parameters on the origin of enantioselectivity.     

Recent advancement and development of chitin and chitosan-based nanocomposite for drug delivery: Critical approach to clinical research

This review depicts the exposure of chitin and chitosan base multifunctional nanomaterial composites for promising applications in field of biomedical science structure, synthesis as well as potential application from a colossal angle. We elaborated critically each of the chitin and chitosan base nanomaterial with its potential application toward biomedical science. For different biomedical applications it use in form of hydrogels, microsphere, nanoparticles, aerogels, microsphere and in form of scaffold. Due to this it had been blended with different polymer such as starch, cellulose, alginate, lipid, hyaluronic acid, polyvinyl alcohol and caboxymethyl cellulose. In this review article, a comprehensive overview of combination of chitin and chitosan base nanomaterial with natural as well as synthetic polymers and their biomedical applications in biomedical field involving drug delivery system all the technical scientific issues have been addressed; highlighting the recent advancements.