Photoconductivity in Metal–Organic Framework (MOF) Thin Films

Photoconductivity is a characteristic property of semi‐conductors. Herein, we present a photo‐conducting crystalline metal–organic framework (MOF) thin film with an on–off photocurrent ratio of two orders of magnitude. These oriented, surface‐mounted MOF thin films (SURMOFs), contain porphyrin in the framework backbone and C₆₀ guests, loaded in the pores using a layer‐by‐layer process. By comparison with results obtained for reference MOF structures and based on DFT calculations, we conclude that donor–acceptor interactions between the porphyrin of the host MOF and the C₆₀ guests give rise to a rapid charge separation. Subsequently, holes and electrons are transported through separate channels formed by porphyrin and by C₆₀, respectively. The ability to tune the properties and energy levels of the porphyrin and fullerene, along with the controlled organization of donor–acceptor pairs in this regular framework offers potential to increase the photoconduction on–off ratio.     

Highly Crystalline and Semiconducting Imine‐Based Two‐Dimensional Polymers Enabled by Interfacial Synthesis

Single‐layer and multi‐layer 2D polyimine films have been achieved through interfacial synthesis methods. However, it remains a great challenge to achieve the maximum degree of crystallinity in the 2D polyimines, which largely limits the long‐range transport properties. Here we employ a surfactant‐monolayer‐assisted interfacial synthesis (SMAIS) method for the successful preparation of porphyrin and triazine containing polyimine‐based 2D polymer (PI‐2DP) films with square and hexagonal lattices, respectively. The synthetic PI‐2DP films are featured with polycrystalline multilayers with tunable thickness from 6 to 200 nm and large crystalline domains (100–150 nm in size). Intrigued by high crystallinity and the presence of electroactive porphyrin moieties, the optoelectronic properties of PI‐2DP are investigated by time‐resolved terahertz spectroscopy. Typically, the porphyrin‐based PI‐2DP 1 film exhibits a p‐type semiconductor behavior with a band gap of 1.38 eV and hole mobility as high as 0.01 cm² V^?1 s^?1, superior to the previously reported polyimine based materials.     

Highly Crystalline and Semiconducting Imine-Based Two-Dimensional Polymers Enabled by Interfacial Synthesis

Single-layer and multi-layer 2D polyimine films have been achieved through interfacial synthesis methods. However, it remains a great challenge to achieve the maximum degree of crystallinity in the 2D polyimines, which largely limits the long-range transport properties. Here we employ a surfactant-monolayer-assisted interfacial synthesis (SMAIS) method for the successful preparation of porphyrin and triazine containing polyimine-based 2D polymer (PI-2DP) films with square and hexagonal lattices, respectively. The synthetic PI-2DP films are featured with polycrystalline multilayers with tunable thickness from 6 to 200 nm and large crystalline domains (100–150 nm in size). Intrigued by high crystallinity and the presence of electroactive porphyrin moieties, the optoelectronic properties of PI-2DP are investigated by time-resolved terahertz spectroscopy. Typically, the porphyrin-based PI-2DP 1 film exhibits a p-type semiconductor behavior with a band gap of 1.38 eV and hole mobility as high as 0.01 cm² V⁻¹ s⁻¹, superior to the previously reported polyimine based materials.     

手性钙钛矿的结构维度与光电特性

近十年,有机无机杂化钙钛矿凭借其新颖优异的光电特性而引起广泛关注。最近,手性钙钛矿由于结合了钙钛矿材料和手性材料各自独特性能,在三维显示、光学信息处理、量子光学、生物探测、自旋电子等方面具有重要应用价值。根据有机、无机组分的空间分布,可以对手性钙钛矿的结构维度进行分类。本文以手性钙钛矿的不同结构维度为出发点,分别阐述了一维、二维和三维手性钙钛矿的晶体结构、光学和光电特性,包括圆二色性、圆偏振光致发光和光电探测等特性。考虑到二维手性钙钛矿具有独特的范德华层状晶体结构,重点介绍了其与其它二维材料组合成二维异质结构方面的工作。最后,分别从材料制备和器件应用的角度,总结了手性钙钛矿的重点挑战问题和未来发展方向。     

Nonlinear Optical Properties of Porphyrin Derivatives with Electron‐donating or Electron‐withdrawing Substituents

To investigate photoelectric properties of meso‐extended porphyrin derivatives with electron‐donating or electron‐withdrawing substituents, a series of functionalized porphyrin materials have been designed and synthesized by Suzuki coupling reaction. The meso‐extended structures were fully characterized by ¹H NMR, IR spectroscopy and mass spectrometry. The photophysical properties of porphyrin derivatives were carefully examined by UV‐Visible and fluorescence spectra, and the solvatochromic effect was observed and discussed. In particular, Z‐scan technique was employed to characterize the third‐order nonlinear optical (NLO) properties of the products such as nonlinear absorption and refraction, the third‐order nonlinear refractive indexes (??⁽³⁾‐value) of these porphyrin derivatives achieved 3.9×10^?12 esu. In addition, the compounds could be self‐assembled into highly organized morphologies through phase‐exchange method. All the results indicated that the discotic materials have the potential for optoelectronic applications.     

Dual-Functional Mesoporous Copper(II) Metal-Organic Frameworks for the Remediation of Organic Dyes

By using tritopic and ditopic organic linkers derived from the same 2,4,6-triphenylpyridine core, copper(II) metal-organic frameworks with different three-dimensional structures have been successfully synthesized under ambient conditions. The crystalline framework, ^PTB MOF ([Cu₃(PTB)₂(H₂O)₃]_n, where H₃PTB=4,4′,4′′-(pyridine-2,4,6-triyl)tribenzoic acid, was observed to be mesoporous in nature and exhibited dual functionality in the removal of organic dyes. While cationic dyes such as methylene blue and malachite green, which are of different sizes, were adsorbed by ^PTB MOF ; anionic dyes such as tartrazine could be effectively degraded in a photo-Fenton-like reaction catalyzed by the MOFs under irradiation with visible light.     

C?H⋅⋅⋅π Interaction‐Modulated Solid‐State Packing and Carrier Mobility in Thienyl and Thieno[3,2‐b]Thienyl End‐Capped Distyrylarylene Derivatives

Research on structure–property relationships in distyrylarylene derivatives is far behind their wide applications in optoelectronic devices due to the absence of crystal structure information. Herein, the single crystals of 4,4′‐bis(2‐thienylvinyl)biphenyl ( 1 ) and 4,4′‐bis(2‐thieno[3,2‐b]thienylvinyl)biphenyl ( 2 ) were successfully grown by the vapor transport method. Both molecules adopt the typical herringbone packing motif. However, the intermolecular C? H???π interaction in compound 2 is much stronger than that in compound 1 . The correlations of interchain interaction with film morphology, optical and electronic properties were studied. Compound 2 formed higher crystalline films with (001) and (111) orientations. The organic field‐effect transistor properties of both materials were investigated. Compound 2 showed better performance with a hole mobility higher than 0.01 cm² V^?1 s^?1 and an on/off current ratio over 10⁶. These results reveal that the intensity of C? H???π interactions can exert dramatic influences on the optical and electronic properties of distyrylarylene‐based materials.     

A Nanotubular Metal–Organic Framework with a Narrow Bandgap from Extended Conjugation**

A one-dimensional nanotubular metal–organic framework (MOF) [Ni(Cu-H₄TPPA)]⋅2 (CH₃)₂NH₂⁺ (H₈TPPA=5,10,15,20-tetrakis[p-phenylphosphonic acid] porphyrin) constructed by using the arylphosphonic acid H₈TPPA is reported. The structure of this MOF, known as GTUB-4 , was solved by using single-crystal X-ray diffraction and its geometric accessible surface area was calculated to be 1102 m² g⁻¹, making it the phosphonate MOF with the highest reported surface area. Due to the extended conjugation of its porphyrin core, GTUB-4 possesses narrow indirect and direct bandgaps (1.9 eV and 2.16 eV, respectively) in the semiconductor regime. Thermogravimetric analysis suggests that GTUB-4 is thermally stable up to 400 °C. Owing to its high surface area, low bandgap, and high thermal stability, GTUB-4 could find applications as electrodes in supercapacitors.     

Amorphous Metal–Organic Framework‐Dominated Nanocomposites with Both Compositional and Structural Heterogeneity for Oxygen Evolution

Amorphous metal–organic frameworks (aMOFs) are an emerging family of attractive materials with great application potential, however aMOFs are usually prepared under harsh conditions and aMOFs with complex compositions and structures are rarely reported. In this work, an aMOF‐dominated nanocomposite (aMOF‐NC) with both structural and compositional complexity has been synthesized using a facile approach. A ligand‐competition amorphization mechanism is proposed based on experimental and density functional theory calculation results. The aMOF‐NC possesses a core–shell nanorod@nanosheet architecture, including a Fe‐rich Fe‐Co‐aMOF core and a Co‐rich Fe‐Co‐aMOF shell in the core–shell structured nanorod, and amorphous Co(OH)₂ nanosheets as the outer layer. Benefiting from the structural and compositional heterogeneity, the aMOF‐NC demonstrates an excellent oxygen evolution reaction activity with a low overpotential of 249 mV at 10.0 mA cm^?2 and Tafel slope of 39.5 mV dec^?1.     

Reactivity of Nickel(II) Porphyrins in oCVD Processes—Polymerisation,Intramolecular Cyclisation and Chlorination

Oxidative chemical vapour deposition of (5,15-diphenylporphyrinato)nickel(II) (NiDPP) with iron(III) chloride as oxidant yielded a conjugated poly(metalloporphyrin) as a highly coloured thin film, which is potentially useful for optoelectronic applications. This study clarified the reactive sites of the porphyrin monomer NiDPP by HRMS, UV/Vis/NIR spectroscopy, cyclic voltammetry and EPR spectroscopy in combination with quantum chemical calculations. Unsubstituted meso positions are essential for successful polymerisation, as demonstrated by varying the porphyrin meso substituent pattern from di- to tri- and tetraphenyl substitution. DFT calculations support the proposed radical oxidative coupling mechanism and explain the regioselectivity of the C−C coupling processes. Depositing the conjugated polymer on glass slides and on thermoplastic transparent polyethylene naphthalate demonstrated the suitability of the porphyrin material for flexible optoelectronic devices.     

Progress on the optoelectronic functional organic crystals

Organic crystals constructed by pi-conjugated molecules have been paid great attention to in the field of organic optoelectronic materials. The superiorities of these organic crystal materials, such as high thermal stability, highly ordered structure, and high carrier mobility over the amorphous thin film ma-terials, make them attractive candidates for optoelectronic devices. Single crystal with definite struc-ture provides a model to investigate the basic interactions between the molecules (supramolecular interaction), and the relationship between molecular stacking modes and optoelectronic performance (luminescence and carrier mobility). Through modulating molecular arrangement in organic crystal, the luminescence efficiency of organic crystal has exceeded 80% and carrier mobility has been up to the level of 10 cm2·V?1·s?1. Amplified stimulated emission phenomena have been observed in many crys-tals. In this paper, we will emphatically introduce the progress in optoelectronic functional organic crystals and some correlative principle.     

Efficient Visible‐Light‐Driven Carbon Dioxide Reduction by a Single‐Atom Implanted Metal–Organic Framework

Modular optimization of metal–organic frameworks (MOFs) was realized by incorporation of coordinatively unsaturated single atoms in a MOF matrix. The newly developed MOF can selectively capture and photoreduce CO₂ with high efficiency under visible‐light irradiation. Mechanistic investigation reveals that the presence of single Co atoms in the MOF can greatly boost the electron–hole separation efficiency in porphyrin units. Directional migration of photogenerated excitons from porphyrin to catalytic Co centers was witnessed, thereby achieving supply of long‐lived electrons for the reduction of CO₂ molecules adsorbed on Co centers. As a direct result, porphyrin MOF comprising atomically dispersed catalytic centers exhibits significantly enhanced photocatalytic conversion of CO₂, which is equivalent to a 3.13‐fold improvement in CO evolution rate (200.6 μmol g^?1 h^?1) and a 5.93‐fold enhancement in CH₄ generation rate (36.67 μmol g^?1 h^?1) compared to the parent MOF.     

Structural Elucidation of the Mechanism of Molecular Recognition in Chiral Crystalline Sponges

To gain insight into chiral recognition in porous materials we have prepared a family of fourth generation chiral metal–organic frameworks (MOFs) that have rigid frameworks and adaptable (flexible) pores. The previously reported parent material, [Co₂(S‐mandelate)₂(4,4′‐bipyridine)₃](NO₃)₂, CMOM‐ 1S , is a modular MOF; five new variants in which counterions (BF₄^?, CMOM‐ 2S ) or mandelate ligands are substituted (2‐Cl, CMOM‐ 11R ; 3‐Cl, CMOM‐ 21R ; 4‐Cl, CMOM‐ 31R ; 4‐CH₃, CMOM‐ 41R ) and the existing CF₃SO₃^? variant CMOM‐ 3S are studied herein. Fine‐tuning of pore size, shape, and chemistry afforded a series of distinct host–guest binding sites with variable chiral separation properties with respect to three structural isomers of phenylpropanol. Structural analysis of the resulting crystalline sponge phases revealed that host–guest interactions, guest–guest interactions, and pore adaptability collectively determine chiral discrimination.     

Chiral Side Groups Trigger Second Harmonic Generation Activity in 3D Octupolar Bipyrimidine‐Based Organic Liquid Crystals

The design of efficient noncentrosymmetric materials remains the ultimate goal in the field of organic second‐order nonlinear optics. Unlike inorganic crystals currently used in second‐order nonlinear optical applications, organic materials are an attractive alternative owing to their fast electro‐optical response and processability, but their alignment into noncentrosymmetric film remains challenging. Here, symmetry breaking by judicious functionalization of 3D organic octupoles allows the emergence of multifunctional liquid crystalline chromophores which can easily be processed into large, flexible, thin, and self‐oriented films with second harmonic generation responses competitive to the prototypical inorganic KH₂PO₄ crystals. The liquid‐crystalline nature of these chiral organic films also permits the modulation of the nonlinear optical properties owing to the sensitivity of the supramolecular organization to temperature, leading to the development of tunable macroscopic materials.     

Direct X‐ray Observation of Trapped CO2 in a Predesigned Porphyrinic Metal–Organic Framework

Metal–organic frameworks (MOFs) are emerging microporous materials that are promising for capture and sequestration of CO₂ due to their tailorable binding properties. However, it remains a grand challenge to pre‐design a MOF with a precise, multivalent binding environment at the molecular level to enhance CO₂ capture. Here, we report the design, synthesis, and direct X‐ray crystallographic observation of a porphyrinic MOF, UNLPF‐2, that contains CO₂‐specific single molecular traps. Assembled from an octatopic porphyrin ligand with [Co₂(COO)₄] paddlewheel clusters, UNLPF‐2 provides an appropriate distance between the coordinatively unsaturated metal centers, which serve as the ideal binding sites for in situ generated CO₂. The coordination of Co^II in the porphyrin macrocycle is crucial and responsible for the formation of the required topology to trap CO₂. By repeatedly releasing and recapturing CO₂, UNLPL‐2 also exhibits recyclability.     

Ultrathin Metal–Organic Framework Nanosheets with Ultrahigh Loading of Single Pt Atoms for Efficient Visible‐Light‐Driven Photocatalytic H2 Evolution

A surfactant‐stabilized coordination strategy is used to make two‐dimensional (2D) single‐atom catalysts (SACs) with an ultrahigh Pt loading of 12.0 wt %, by assembly of pre‐formed single Pt atom coordinated porphyrin precursors into free‐standing metal–organic framework (MOF) nanosheets with an ultrathin thickness of 2.4±0.9 nm. This is the first example of 2D MOF‐based SACs. Remarkably, the 2D SACs exhibit a record‐high photocatalytic H₂ evolution rate of 11 320 μmol g^?1 h^?1 via water splitting under visible light irradiation (λ>420 nm) compared with those of reported MOF‐based photocatalysts. Moreover, the MOF nanosheets can be readily drop‐casted onto solid substrates, forming thin films while still retaining their photocatalytic activity, which is highly desirable for practical solar H₂ production.     

Amorphous Metal–Organic Framework-Dominated Nanocomposites with Both Compositional and Structural Heterogeneity for Oxygen Evolution

Amorphous metal–organic frameworks (aMOFs) are an emerging family of attractive materials with great application potential, however aMOFs are usually prepared under harsh conditions and aMOFs with complex compositions and structures are rarely reported. In this work, an aMOF-dominated nanocomposite (aMOF-NC) with both structural and compositional complexity has been synthesized using a facile approach. A ligand-competition amorphization mechanism is proposed based on experimental and density functional theory calculation results. The aMOF-NC possesses a core–shell nanorod@nanosheet architecture, including a Fe-rich Fe-Co-aMOF core and a Co-rich Fe-Co-aMOF shell in the core–shell structured nanorod, and amorphous Co(OH)₂ nanosheets as the outer layer. Benefiting from the structural and compositional heterogeneity, the aMOF-NC demonstrates an excellent oxygen evolution reaction activity with a low overpotential of 249 mV at 10.0 mA cm⁻² and Tafel slope of 39.5 mV dec⁻¹.     

Porous shape-persistent rylene imine cages with tunable optoelectronic properties and delayed fluorescence

A simultaneous combination of porosity and tunable optoelectronic properties, common in covalent organic frameworks, is rare in shape-persistent organic cages. Yet, organic cages offer important molecular advantages such as solubility and modularity. Herein, we report the synthesis of a series of chiral imine organic cages with three built-in rylene units by means of dynamic imine chemistry and we investigate their textural and optoelectronic properties. Thereby we demonstrate that the synthesized rylene cages can be reversibly reduced at accessible potentials, absorb from UV up to green light, are porous, and preferentially adsorb CO₂ over N₂ and CH₄ with a good selectivity. In addition, we discovered that the cage incorporating three perylene-3,4:9,10-bis(dicarboximide) units displays an efficient delayed fluorescence. Time-correlated single photon counting and transient absorption spectroscopy measurements suggest that the delayed fluorescence is likely a consequence of a reversible intracage charge-separation event. Rylene cages thus offer a promising platform that allows combining the porosity of processable materials and photochemical phenomena useful in diverse applications such as photocatalysis or energy storage.

Chiral rylene imine cages combine porosity and tunable optoelectronic properties. They adsorb CO₂ over N₂ with good selectivity and can show an efficient delayed fluorescence.     

Vapor‐Phase Deposition and Modification of Metal–Organic Frameworks: State‐of‐the‐Art and Future Directions

Materials processing, and thin‐film deposition in particular, is decisive in the implementation of functional materials in industry and real‐world applications. Vapor processing of materials plays a central role in manufacturing, especially in electronics. Metal–organic frameworks (MOFs) are a class of nanoporous crystalline materials on the brink of breakthrough in many application areas. Vapor deposition of MOF thin films will facilitate their implementation in micro‐ and nanofabrication research and industries. In addition, vapor–solid modification can be used for postsynthetic tailoring of MOF properties. In this context, we review the recent progress in vapor processing of MOFs, summarize the underpinning chemistry and principles, and highlight promising directions for future research.     

Porphyrin/Platinum(II) C^N^N Acetylide Complexes: Synthesis,Photophysical Properties,and Singlet Oxygen Generation

A new class of substituted porphyrins has been developed in which a different number of cyclometalated Pt^II C^N^N acetylides and polyethylene glycol (PEG) chains are attached to the meso positions of the porphyrin core, which are meant for photophysical, electrochemical, and in vitro light‐induced singlet oxygen (¹O₂) generation studies. All of these Zn^II porphyrin–Pt^II C^N^N acetylide conjugates show moderate to high (Φ_Δ=0.55 to 0.63) singlet oxygen generation efficiency. The complexes are soluble in organic solvents but, despite the PEG substituents, slowly aggregate in aqueous solvent systems. These conjugates also exhibit interesting photophysical properties, including near‐complete photoinduced energy transfer (PEnT) through the rigid acetylenic bond(s) from the Pt^II C^N^N antenna units to the Zn^II porphyrin core, which shows sensitized luminescence, as shown by quenching of Pt^II C^N^N‐based luminescence. Electrochemical measurements show a set of redox processes that are approximately the sum of what is observed for the Pt^II C^N^N acetylide and Zn^II porphyrin units. UV/Vis spectroscopic properties are supported by DFT calculations.