Magnetic Field-Enhanced Electrocatalytic Oxygen Evolution on a Mixed-Valent Cobalt-Modulated LaCoO3 Catalyst

Extensive efforts to enhance the oxygen evolution reaction (OER) catalytic performance of transition metal oxides mainly concentrate on the extrinsic morphology tailoring, lattice doping, and electrode interface optimizing. Nevertheless, little room is left for performance improvement using these methods and an obvious gap still exists compared to the precious metal catalysts. In this work, a novel “mixed-valent cobalt modulation” strategy is presented to enhance the electrocatalytic OER of perovskite LaCoO₃ (LCO) oxide. The valence transition of cobalt is realized by ethylenediamine post reduction procedure at room temperature, which further induces the variation of magnetic properties for LCO catalyst. The optimized LCO catalyst with Co²⁺/Co³⁺ of 1.98 % exhibits the best OER activity, and the overpotential at 10 mA cm⁻² current density is decreased by 170 mV compared pristine LCO. Impressively, the ferromagnetic LCO catalyst can perform magnetic OER enhancement. By application of an external magnetic field, the overpotential of LCO at 10 mA cm⁻² can be further decreased by 20 mV compared to that of under zero magnetic field, which arises from the enhanced energy states of electrons and accelerated electron transfer process driven by magnetic field. Our findings may provide a promising strategy to break the bottleneck for further enhancement of OER performance.     

Spin-Enhanced O−H Cleavage in Electrochemical Water Oxidation

Herein we report the vital role of spin polarization in proton-transfer-mediated water oxidation over a magnetized catalyst. During the electrochemical oxygen evolution reaction (OER) over ferrimagnetic Fe₃O₄, the external magnetic field induced a remarkable increase in the OER current, however, this increment achieved in weakly alkaline pH (pH 9) was almost 20 times that under strongly alkaline conditions (pH 14). The results of the surface modification experiment and H/D kinetic isotope effect investigation confirm that, at weakly alkaline pH, during the nucleophilic attack of Fe^IV=O by molecular water, the magnetized Fe₃O₄ catalyst polarizes the spin states of the nucleophilic attacking intermediates. The spin-enhanced singlet O−H cleavage and triplet O−O bonding occur synergistically, which promotes the O₂ generation more significantly than the strongly alkaline case involving only spin-enhanced O−O bonding.     

Iron-based nanomaterials used as magnetic mesoporous nanocomposites to catalyze the preparation of N-sulfonylimines

A new magnetic nanocatalyzed synthetic method for the synthesis of aldimines was evidenced. The reaction was carried out in a Schlenk tube under reflux conditions using various solvents and different nanomaterials as catalysts. In these reactions, an excellent yield of aromatic aldimines was obtained in the presence of silica-coated magnetic nanomaterials. The prepared catalyst was also characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, nitrogen adsorption and desorption studies, energy dispersive X-ray spectroscopy, and small-angle X-ray scattering spectroscopy. It was shown that the magnetic nanocatalysts can be easily separated from the reaction mixture using an external magnet and reused.     

Water-Assisted Chemical Route Towards the Oxygen Evolution Reaction at the Hydrated (110) Ruthenium Oxide Surface: Heterogeneous Catalysis via DFT-MD and Metadynamics Simulations

Notwithstanding that RuO₂ is a promising catalyst for the oxygen evolution reaction (OER), a plethora of fundamental details on its catalytic properties are still elusive, severely limiting its large-scale deployment. It is also established experimentally that corrosion and wettability of metal oxides can, in fact, enhance the catalytic activity for OER owing to the formation of a hydrated surface layer. However, the mechanistic interplay between surface wettability, interfacial water dynamics and OER across RuO₂, and what degree these processes are correlated are still debated. Herein, spin-polarized Density Functional Theory Molecular Dynamics (DFT-MD) simulations, coupled with advanced enhanced sampling methods in the well-tempered metadynamics framework, are applied to gain a global understanding of RuO₂ aqueous interface (explicit water solvent) in catalyzing the OER, and hence possibly help in the design of novel catalysts in the context of photochemical water oxidation. The present study quantitatively assesses the free-energy barriers behind the OER at the (110)-RuO₂ catalyst surface revealing plausible pathways composing the reaction network of the O₂ evolution. In particular, OER is investigated at room temperature when such a surface is exposed to both gas-phase and liquid-phase water. Albeit a unique efficient pathway has been identified in the gas-phase OER, a surprisingly lowest-free-energy-requiring reaction route is possible when (110)-RuO₂ is in contact with explicit liquid water. By estimating the free-energy surfaces associated to these processes, we reveal a noticeable water-assisted OER mechanism which involves a crucial proton-transfer-step assisted by the local water environment. These findings pave the way toward the systematic usage of DFT-MD coupled with metadynamics techniques for the fine assessment of the activity of catalysts, considering finite-temperature and explicit-solvent effects.     

Ni ion-containing immobilized ionic liquid on magnetic Fe3O4 nanoparticles: An effective catalyst for the Heck reaction

In this work, we synthesized Ni²⁺-containing 1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride ionic liquid on magnetic Fe₃O₄ nanoparticles. The catalytic activity of these novel nanocomposites was finally evaluated for the Heck reaction at 100 °C, and can be reused after washing without loss in activity. The immobilized ionic liquid catalysts proved to be effective and easily separated from the reaction media by applying an external magnetic field. This procedure has many obvious advantages compared to those reported in the previous literature, including avoidance of the use of the expensive Pd catalysts, mild reaction conditions, high yields, and simplicity of the methodology.     

1D Fe_3O_4@CuSiO_3 composites catalyzed decarboxylative A~3-coupling for propargylamine synthesis

Highly active and stable magnetic copper catalysts were successfully achieved by magnetic induced Stober method and subsequent hydrothermal reaction with copper ions in alkaline condition.The high content of Cu~(2+) as well as the unique structures of hierarchical copper silicate in the as-prepared catalysts endowed their outstanding catalytic performance.Efficient decarboxylative A~3-coupling of a-keto acid,amine and alkyne was realized with the low Fe_3 O_4@CuSiO_3 loading.A range of propargylamines were produced in good to excellent yields under solvent-free condition.Moreover,the catalyst can be easily separated from the final organic product with an external magnet.Also,this kind of catalyst could be recycled up to six times while maintaining its activity.     

Pd–S-methylisothiourea supported on magnetic nanoparticles as an efficient and reusable nanocatalyst for Heck and Suzuki reactions

Supported Pd–S-methylisothiourea on magnetic nanoparticles (Pd–SMU-MNPs) as an efficient and magnetically reusable nanocatalyst was prepared and applied for the Heck and Suzuki cross-coupling reactions. All coupling reactions proceeded in short reaction times with good to excellent yields. After completion of reactions, the catalyst was easily separated from the reaction mixture using an external magnetic field and reused for several consecutive runs without significant loss of its catalytic efficiency and activity. This nanomagnetic catalyst was characterized by FT-IR spectroscopy, XRD, VSM, ICP-OES, TEM and SEM techniques. The leaching of the catalyst has been examined by a hot filtration test and ICP-OES analysis.     

Bio-inspired Design of Bidirectional Oxygen Reduction and Oxygen Evolution Reaction Molecular Electrocatalysts

The proper utilization of renewable energy sources has emerged as a major challenge in our pursuit of a sustainable and carbon-neutral energy landscape. Small molecule activation is a key component for proper utilization of renewable energy resources, where O₂/H₂O redox couple is reckoned to be a potential game changer. In this regard, electrocatalytic oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) have become the prime interest of catalyst designers. Typically, these ORR and OER electrocatalysts are developed distinctly; however, very soon, the requirement of a bidirectional ORR/OER electrocatalyst becomes obvious for practical applicability and rapid energy transduction purposes. A bidirectional catalyst is defined as a catalyst capable of driving a redox reaction in opposing directions. This review has portrayed the development of enzyme structure-inspired design of molecular bidirectional ORR/OER catalysts. The strategic incorporation of secondary and outer coordination sphere features has significantly enhanced the performance of these catalysts, which can be monitored via the key catalytic parameters. These bifunctional OER/ORR catalysts are vital for metal-air battery and fuel cell applications and appropriately poised to lay the foundation for an efficient, economical, and eco-friendly pathway for sustainable energy usage with the rational assembly of energy converting and storage devices.     

Sulfonic acid-functionalized core-shell Fe_3O_4@carbon microspheres as magnetically recyclable solid acid catalysts

Green and recyclable solid acid catalysts are in urgent demand as a substitute for conventional liquid mineral acids.In this work,a series of novel sulfonic acid-functionalized core-shell Fe_3 O_4@carbon microspheres(Fe_3 O_4@C-SO_3 H) have been designed and synthesized as an efficient and recyclable heterogeneous acid catalyst.For the synthesis,core-shell Fe_3 O_4@RF(resorcinol-formaldehyde) microspheres with tunable shell thickness were achieved by interfacial polymerization on magnetic Fe_3 O_4 microspheres.After high-temperature carbonization,the microspheres were eventually treated by surface sulfonation,re sulting in Fe_3 O_4@C-x-SO_3 H(x stands for carbonization temperature) microspheres with abundant surface SO_3 H groups.The obtained microspheres possess uniform core-shell structure,partially-graphitized carbon skeletons,superparamagnetic property,high magnetization saturation value of 10.6 emu/g,and rich SO_3 H groups.The surface acid amounts can be adju sted in the range of 0.59-1.04 mmol/g via sulfonation treatment of carbon shells with different graphitization degrees.The magnetic Fe_3 O_4@C-x-SO_3 H microspheres were utilized as a solid acid catalyst for the acetalization reaction between benzaldehyde and ethylene glycol,demonstrating high selectivity(97%) to benzaldehyde ethylene glycol acetal.More importantly,by applying an external magnetic field,the catalysts can be easily separated from the heterogeneous reaction solutions,which later show well preserved catalytic activity even after 9 cycles,revealing good recyclability and high stability.     

Copper immobilized on magnetite nanoparticles coated with ascorbic acid: An efficient and reusable catalyst for C─N and C─O cross‐coupling reactions

In a continuation of using magnetic nanoparticle (MNP)‐supported catalysts, ascorbic acid (readily available, very safe and with strong affinity to MNPs) was used instead of the commonly used silica layer coating. This hybrid was used for immobilizing copper nanoparticles to produce Cu/ascorbic acid@MNPs catalyst. The catalyst was characterized and used in carbon–oxygen and carbon–nitrogen (various substrates) cross‐coupling reactions in aqueous media and at room temperature with excellent product yields. Furthermore, the catalyst could be quickly and completely recovered using an external magnetic field and reused for six reaction cycles without significant change in catalytic activity.     

Unmodified Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanostructure promoted with external magnetic field: safe,magnetically recoverable,and efficient nanocatalyst for N- and C-alkylation reactions in green conditions

Transition metal compounds have emerged as suitable catalysts for organic reactions. Magnetic compounds as soft Lewis acids can be used as catalysts for organic reactions. In this report, the Fe₃O₄ nanostructures were obtained from Fe²⁺ and Fe³⁺-salts, under an external magnetic field (EMF) without any protective agent. The X-ray photoelectron spectroscopy, scanning electron microscopy, and energy dispersive X-ray spectroscopy tools were used to characterize these magnetic compounds. The two-dimensional (2-D, it showed nanometric size in the two dimensions, nanorod structure) Fe₃O₄ compound showed high catalytic activity and stability in N- and C-alkylation reactions. A diverse range of N- and C-alkylation products were obtained in moderate to high yield under green and mild conditions in air. Also the N- and C-alkylation products can be obtained with different selectivity and yield by exposure reactions with EMF. Results of alkylation reactions showed that the presence of Fe(II) and Fe(III) species on the surface of magnetic catalysts (phase structure of magnetic compounds) are essential as very cheap active sites. Also, morphology of magnetic catalysts had influence on their catalytic performances. After the reaction, the catalyst/product(s) separation could be easily achieved with an external magnet and more than 95% of catalyst could be recovered. The catalyst was reused at least four times without any loss of its high catalytic activity for N- and C-alkylation reactions.     

磁场效应对理解水分解反应物的可能意义

电催化水分解由两个基元反应构成,即析氢反应(HER)和析氧反应(OER).开发强大的HER和OER技术需要在分子层面理解反应机理,然而,目前水分解反应的反应物还没有完全确定.本文利用磁场来研究HER中的质子传输和OER中的氢离子传输,对确定HER和OER中真实的反应物具有重要意义.磁场是改变离子等带电物质运动的一种有效...     

酸性电解水过程中氧析出反应的机理及铱基催化剂的研究进展北大核心CSCD

可持续能源的迅速发展,使绿色清洁的氢能源成为热点。质子交换膜(PEM)水电解是一项很有前途的技术,可高效生产高纯度氢气。IrO_(2)作为质子交换膜(PEM)水电解槽阳极氧析出反应(OER)的商用电催化剂,既能在强酸性、高强度腐蚀条件下保持稳定,又表现出优异的催化性能。然而,由于Ir的稀缺性和昂贵的价格,提高Ir基催化剂的OER活性,开发低Ir催化剂就显得至关重要。对其反应机理的认知是当前的研究热点之一,也是设计优异的OER催化剂的关键所在。因此,首先从OER机理出发,对目前被广泛认可的吸附物逸出机理(AEM)和晶格氧逸出机理(LOER)两种反应机理进行了研究。随后,根据所提出的这两种机理,介绍了OER催化剂设计的基本准则,即调控Ir基催化剂的电子结构,改善反应中间物种在催化活性位点上的吸附能,从而提高OER催化活性。并从催化剂的结构设计、形貌控制、载体材料3个方面简单概述了最近OER催化剂的研究进展。最后,在已有研究的基础上,提出了目前OER催化剂面临的困难与挑战,这为以后相关的研究指明了方向。     

Direct Detection of FeVI Water Oxidation Intermediates in an Aqueous Solution

In situ detection of highly-oxidized metal intermediates is the key to identifying the active center of an oxygen evolution reaction (OER) catalyst, but it remains challenging for NiFe-based catalysts in an aqueous solution under working conditions. Here, by utilizing the dynamic stability of the Fe^VIO₄²⁻ intermediates in a self-healing water oxidation cycle of NiFe-based catalyst, the highly-oxidized Fe^VI intermediates leached into the electrolyte are directly detected by simple spectroelectrochemistry. Our results provide direct evidence that Fe is the active center in NiFe-based OER catalysts. Furthermore, it is revealed that the incorporation of Co into NiFe-based catalyst facilitates the formation of Fe^VI active species, thus enhancing the OER activity of NiCoFe-based catalyst. The insights into the mechanisms for the sustainable generation of Fe^VI active species in these NiFe-based catalysts lay the foundation for the design of more efficient and stable OER catalysts.     

The Spin Modulation Stimulated Efficient Electrocatalytic Oxygen Evolution Reaction over LaCoO3 Perovskite

Perovskite is a promising non-noble catalyst and has been widely investigated for the electrochemical oxygen evolution reaction (OER). However, there is still serious lack of valid approaches to further enhance their catalytic performance. Herein, we propose a spin state modulation strategy to improve the OER electrocatalytic activity of typical perovskite material of LaCoO₃. Specifically, the electronic configuration transition was realized by a simple high temperature thermal reduction process. M-H hysteresis loop results reveal that the reduction treatment can produce more unpaired electrons in 3d orbit by promoting the electron transitions of Co from low spin state to high spin state, and thus lead to the increase of the spin polarization. Electrochemical measurements show that the catalytic performance of LaCoO₃ is strongly dependent on its electronic configuration. With the optimized reduction treatment, the overpotential for the OER process in 0.5 M KOH electrolyte solution at 10 mA cm⁻² current density was 396 mV, significantly lower than that of the original state. Furthermore, it can mediate efficient OER with an overpotential of 383 mV under an external magnetic field, which is attributed to the appropriate electron filling. Our results show that electron spin state regulation is a new way to boost the OER electrocatalytic activity.     

Bifunctional Catalysts for Reversible Oxygen Evolution Reaction and Oxygen Reduction Reaction

Metal-air batteries (MABs) and reversible fuel cells (RFCs) rely on the bifunctional oxygen catalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). Finding efficient bifunctional oxygen catalysts is the ultimate goal and it has attracted a great deal of attention. The dilemma is that a good ORR catalyst is not necessarily efficient for OER, and vice versa. Thus, the development of a new type of bifunctional oxygen catalysts should ensure that the catalysts exhibit high activity for both OER and ORR. Composites with multicomponents for active centers supported on highly conductive matrices could be able to meet the challenges and offering new opportunities. In this Review, the evolution of bifunctional catalysts is summarized and discussed aiming to deliver high-performance bifunctional catalysts with low overpotentials.     

Electrodeposition at Highly Negative Potentials of an Iron-Cobalt Oxide Catalyst for Use in Electrochemical Water Splitting

Earth-abundant transition metal-based catalysts have been extensively investigated for their applicability in water electrolysers to enable overall water splitting to produce clean hydrogen and oxygen. In this study a Fe−Co based catalyst is electrodeposited in 30 seconds under vigorous hydrogen evolution conditions to produce a high surface area material that is active for both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). This catalyst can achieve high current densities of 600 mAcm⁻² at an applied potential of 1.6 V (vs RHE) in 1 M NaOH with a Tafel slope value of 48 mV dec⁻¹ for the OER. In addition, the HER can be facilitated at current densities as high as 400 mA cm⁻² due to the large surface area of the material. The materials were found to be predominantly amorphous but did contain crystalline regions of CoFe₂O₄ which became more evident after the OER indicating interesting compositional and structural changes that occur to the catalyst after an electrocatalytic reaction. This rapid method of creating a bimetallic oxide electrode for both the HER and OER could possibly be adopted to other bimetallic oxide systems suitable for electrochemical water splitting.     

Low‐Coordinate Iridium Oxide Confined on Graphitic Carbon Nitride for Highly Efficient Oxygen Evolution

Highly active and durable electrocatalysts for the oxygen evolution reaction (OER) is greatly desired. Iridium oxide/graphitic carbon nitride (IrO₂/GCN) heterostructures are designed with low‐coordinate IrO₂ nanoparticles (NPs) confined on superhydrophilic highly stable GCN nanosheets for efficient acidic OER. The GCN nanosheets not only ensure the homogeneous distribution and confinement of IrO₂ NPs but also endows the heterostructured catalyst system with a superhydrophilic surface, which can maximize the exposure of active sites and promotes mass diffusion. The coordination number of Ir atoms is decreased owing to the strong interaction between IrO₂ and GCN, leading to lattice strain and increment of electron density around Ir sites and hence modulating the attachment between the catalyst and reaction intermediates. The optimized IrO₂/GCN heterostructure delivers not only by far the highest mass activity among the reported IrO₂‐based catalysts but also decent durability.     

Phase-Selective Syntheses of Cobalt Telluride Nanofleeces for Efficient Oxygen Evolution Catalysts

Cobalt-based nanomaterials have been intensively explored as promising noble-metal-free oxygen evolution reaction (OER) electrocatalysts. Herein, we report phase-selective syntheses of novel hierarchical CoTe₂ and CoTe nanofleeces for efficient OER catalysts. The CoTe₂ nanofleeces exhibited excellent electrocatalytic activity and stablity for OER in alkaline media. The CoTe₂ catalyst exhibited superior OER activity compared to the CoTe catalyst, which is comparable to the state-of-the-art RuO₂ catalyst. Density functional theory calculations showed that the binding strength and lateral interaction of the reaction intermediates on CoTe₂ and CoTe are essential for determining the overpotential required under different conditions. This study provides valuable insights for the rational design of noble-metal-free OER catalysts with high performance and low cost by use of Co-based chalcogenides.     

Effect of magnetic field on properties of AuPt particles magneto-electrodeposited on carbon paper

AuPt nano particles are bi-functional catalysts for Oxygen Reduction Reaction (ORR) and Oxygen Evolution Reaction (OER) that were taken place on air electrodes in lithium air batteries. Magnetic field has been applied during electrodeposition for the preparation of AuPt particles. With the increase of the magnetic flux density under constant current density, the grain size decreases from about 1μm to 200nm and the activity of the AuPt catalyst increases. The magnetic field oriented vertical to the electric field has a promotion effect on increasing the catalytic ability of AuPt/carbon electrode. By pulse plating, the grain size decreases to about 100nm. By adjusting parameters of the electric field and the magnetic field, controllable in-situ preparation of AuPt catalyst with various morphology and catalytic activity could be achieved.