Enhanced red emission from GdF3:Yb3+,Er3+ upconversion nanocrystals by Li+ doping and their application for bioimaging

Under 980?nm near-infrared (NIR) excitation, upconversion luminescent (UCL) emission of GdF(3):Yb,Er upconversion nanoparticles (UCNPs) synthesized by a simple and green hydrothermal process can be tuned from yellow to red by varying the concentration of dopant Li(+) ions. A possible mechanism for enhanced red upconverted radiation is proposed. A layer of silica was coated onto the surface of GdF(3):Yb,Er,Li UCNPs to improve their biocompatibility. The silica-coated GdF(3):Yb,Er,Li UCNPs show great advantages in cell labeling and in vivo optical imaging. Moreover, GdF(3) UCNPs also exhibited a positive contrast effect in T(1)-weighted magnetic resonance imaging (MRI). These results suggest that the GdF(3) UCNPs could act as dual-modality biolabels for optical imaging and MRI.     

One-pot synthesis of concentration and excitation dual-dependency truly full-color photoluminescence carbon dots

The paper describes a kind of truly full-color photoluminescence (PL) CDs. The CDs were prepared by using one-pot hydrothermally heating citric acid and formamide at 200 °C for 2 h. The CDs have three fluorescent centers at blue, green, and red light region. Their color was regulated through two means, including changing excitation wavelengths or CDs concentrations. The emission maxima changed from blue to red with the increase of excitation wavelengths or CDs concentrations. The full-color PL behavior of the CDs was inherited and conserved in the solid polymer matrix, giving multicolor CDs/polymer films and light emitting diodes (LEDs). White-light LED (WLED) with the CIE coordinate approaching to (0.31, 0.32) were also achieved.     

基于上转换纳米粒子的低损伤神经界面技术

Optogenetics is a neuromodulation technology that combines light control technology with genetic technology, thus allowing the selective activation and inhibition of the electrical activity in specific types of neurons with millisecond time resolution. Over the past several years, optogenetics has become a powerful tool for understanding the organization and functions of neural circuits, and it holds great promise to treat neurological disorders. To date, the excitation wavelengths of commonly employed opsins in optogenetics are located in the visible spectrum. This poses a serious limitation for neural activity regulation because the intense absorption and scattering of visible light by tissues lead to the loss of excitation light energy and also cause tissue heating. To regulate the activity of neurons in deep brain regions, it is necessary to implant optical fibers or optoelectronic devices into target brain areas, which however can induce severe tissue damage. Non- or minimally-invasive remote control technologies that can manipulate neural activity have been highly desirable in neuroscience research. Upconversion nanoparticles (UCNPs) can emit light with a short wavelength and high frequency upon excitation by light with a long wavelength and low frequency. Therefore, UCNPs can convert low-frequency near-infrared (NIR) light into high-frequency visible light for the activation of light-sensitive proteins, thus indirectly realizing the NIR optogenetic system. Because NIR light has a large tissue penetration depth, UCNP-mediated optogenetics has attracted significant interest for deep-tissue neuromodulation. However, in UCNP-mediated in vivo optogenetic experiments, as the up-conversion efficiency of UCNPs is low, it is generally necessary to apply high-power NIR light to obtain up-converted fluorescence with energy high enough to activate a photosensitive protein. High-power NIR light can cause thermal damage to tissues, which seriously restricts the applications of UCNPs in optogenetic technology. Therefore, the exploration of strategies to increase the up-conversion efficiency, fluorescence intensity, and biocompatibility of UCNPs is of great significance to their wide applications in optogenetic systems. This review summarizes recent developments and challenges in UCNP-mediated optogenetics for deep-brain neuromodulation. We firstly discuss the correspondence between the parameters of UCNPs and employed opsins in optogenetic experiments, which mainly include excitation wavelengths, emission wavelengths, and luminescent lifetimes. Thereafter, we introduce the methods to enhance the conversion efficiency of UCNPs, including optimizing the structure of UCNPs and modifying the organic dyes in UCNPs. In addition, we also discuss the future opportunities in combining UCNP-mediated optogenetics with flexible microelectrode technology for the long-term detection and regulation of neural activity in the case of minimal injury.     

Multicolor output and shape controlled synthesis of lanthanide-ion doped fluorides upconversion nanoparticles

A general and facile approach for tailoring the multicolor output and shapes of lanthanide-ion doped fluoride upconversion nanoparticles (UCNPs) within a given composition is presented. By adjusting the temperature and time in the thermolysis procedure, the color output and shapes of NaYF(4):20%Yb, 2%Er UCNPs can be readily manipulated. The nanoparticles were characterized through the use of transmission electron microscopy (TEM), powder X-ray diffraction (XRD) and upconversion luminescence spectroscopy. It is shown that the relative intensities of green emissions gradually increased with the rise of temperature and prolongation of growth time under excitation of 980 nm, which resulted in multicolor output of NaYF(4):20%Yb, 2%Er UCNPs. Simultaneously, the shapes for UCNPs can also be controlled. TEM images, estimated micro-stress by Williamson-Hall methodology and a series of control experiments and analyses reveal that crystallinity is mainly responsible for the multicolor output of UCNPs. Based on the above method, the tailoring of color output is also successfully realized in Ho(3+) and Tm(3+) ions. It is expected that this method may be used to tune the physical properties of other nanoparticles, and these multicolored UCNPs are promising for applications in multiplexed bioimaging, biodetection, display, other optical technologies, etc.     

Photon‐Upconverting Nanoparticles for Optical Encoding and Multiplexing of Cells,Biomolecules, and Microspheres

Photon‐upconverting nanoparticles (UCNPs) are lanthanide‐doped nanocrystals that emit visible light under near‐infrared excitation (anti‐Stokes emission). This unique optical property precludes background fluorescence and light scattering from biological materials. The emission of multiple and narrow emission lines is an additional hallmark of UCNPs that opens up new avenues for optical encoding. Distinct emission signatures can be obtained if the multiple emission of UCNPs is tuned by their dopant composition or by surface modification with dyes. Tuning the intensity of only one of the multiple emission lines and using another one as a constant reference signal enables the design of ratiometric codes that are resistant to fluctuations in absolute signal intensities. Combining several UCNPs each displaying a distinct set of emission lines expands the coding capacity exponentially and lays the foundation for highly multiplexed analyte detection. This Review highlights the potential of UCNPs for labeling and encoding biomolecules, microspheres, and even whole cells.     

An Upconversion Nanoparticle with Orthogonal Emissions Using Dual NIR Excitations for Controlled Two‐Way Photoswitching

Developing multicolor upconversion nanoparticles (UCNPs) with the capability of regulating their emission wavelengths in the UV to visible range in response to external stimuli can offer more dynamic platforms for applications in high‐resolution bioimaging, multicolor barcoding, and driving multiple important photochemical reactions, such as photoswitching. Here, we have rationally designed single‐crystal core–shell‐structured UCNPs which are capable of orthogonal UV and visible emissions in response to two distinct NIR excitations at 808 and 980 nm. The orthogonal excitation–emission properties of such UCNPs, as well as their ability to utilize low‐power excitation, which attenuates any local heating from the lasers, endows the UCNPs with great potential for applications in materials and biological settings. As a proof of concept, the use of this UCNP for the efficient regulation of the two‐way photoswitching of spiropyran by using dual wavelengths of NIR irradiation has been demonstrated.     

Near-infrared light-triggered dissociation of block copolymer micelles using upconverting nanoparticles

We demonstrate a novel strategy enabling the use of a continuous-wave diode near-infrared (NIR) laser to disrupt block copolymer (BCP) micelles and trigger the release of their "payloads". By encapsulating NaYF(4):TmYb upconverting nanoparticles (UCNPs) inside micelles of poly(ethylene oxide)-block-poly(4,5-dimethoxy-2-nitrobenzyl methacrylate) and exposing the micellar solution to 980 nm light, photons in the UV region are emitted by the UCNPs, which in turn are absorbed by o-nitrobenzyl groups on the micelle core-forming block, activating the photocleavage reaction and leading to the dissociation of BCP micelles and release of co-loaded hydrophobic species. Our strategy of using UCNPs as an internal UV or visible light source upon NIR light excitation represents a general and efficient method to circumvent the need for UV or visible light excitation that is a common drawback for light-responsive polymeric systems developed for potential biomedical applications.     

A tunable full-color lanthanide noncovalent polymer based on cucurbituril-mediated supramolecular dimerization

The construction of lanthanide multicolor luminescent materials with tunable photoluminescence properties has been developed as one of the increasingly significant topics and shown inventive applications in miscellaneous fields. However, fabricating such materials based on synergistically assembly-induced emission rather than simple blending of different fluorescent dyes together still remains a challenge. Herein, we report a europium-based noncovalent polymer with tunable full-color emission, which is constructed from the 2,6-pyridinedicarboxylic acid-bearing bromophenylpyridinium salt. This rationally designed bifunctional component can concurrently serve as a guest molecule and a chelating ligand to associate with cucurbit[8]uril and europium ions, thus leading to the formation of a trichromatic (red–green–blue, RGB) photoluminescent polypseudorotaxane-type noncovalent polymer in aqueous solution. Meanwhile, the full-color emission enclosed within the RGB color triangle could be readily produced by simply tuning the molar ratio of cucurbit[8]uril and europium ions. The lanthanide supramolecular polymer featuring tricolor emission, long lifetime, high photoluminescence efficiency and low cytotoxicity could be further applied in multicolor imaging in a cellular environment. These results provide a new and feasible strategy for the construction of full-color single lanthanide self-assembled nanoconstructs.

A lanthanide noncovalent polymer is constructed by integrating host–guest complexation and metal–ligand coordination, and can exhibit tunable trichromatic emission and multiple excited-state lifetimes under single wavelength excitation.     

具有协同表面配体的水溶性稀土上转换发光纳米材料用于活体淋巴结显像

通过水热法,以油酸和两亲性聚乙烯吡咯烷酮(PVP)为协同表面配体,一步水热合成水溶性稀土上转换发光纳米材料(NaYF4:20％ Yb 1％ Tm).稀土纳米粒径尺寸平均为16 nm,在水溶液中稳定单分散,具有较强上转换发光.具有较低的细胞毒性,可用于上转换发光细胞成像.并进一步用于活体淋巴结显像,表现出高的信噪比.     

Advances,opportunities, and challenge for full-color emissive carbon dots

Carbon dots(CDs), novel luminescent zero-dimensional carbon nanomaterials, have been widely applied due to their low toxicity, optimal optical properties, and easy modification. However, the current controllable equipment and mechanism explanation of CDs are relatively vague and require urgent resolution.Full-color emission CDs, an essential CDs category, have attracted people’s attention given their light and color-tunable properties. In addition to a wider range of biological and optoelectroni...     

Density-Dependent Emission Colors from a Conformation-Switching Chromophore in Polyurethanes

Achieving full-color emission from a single chromophore is not only highly desirable from practical considerations, but also greatly challenging for fundamental research. Herein, we demonstrated the density-dependent emission colors from a single boron-containing chromophore, from which multi-color fluorescent polyurethanes were prepared as well. Originating from its switchable molecular conformations, the emission color of the chromophore was found to be governed by the packing density and strongly influenced by hydrogen bonding interactions. The chromophore was incorporated into polyurethanes to achieve full-color emitting materials; the emission color was only dependent on the chromophore density and could be tuned via synthetic approach by controlling the compositions. The emission colors could also be modulated by physical approaches, including by swelling/deswelling process, compression under high pressure, and even blending the fluorescent polyurethane with non-emitting ones.     

NIR triggered NaYF4:Yb3+,Tm3+@NaYF4/CsPb(Br1-x/Ix)3 composite for up-converted white-light emission and dual-model anti-counterfeiting applications

Assembling nanomaterials from two classes with exceptional control at the nanoscale can lead to new nanohybrids with novel properties. Here, we report the tunable up-conversion luminescence properties of CsPb(Br_1-x/I_x)₃ perovskite nanocrystals (PeNCs) sensitized by NaYF₄:Yb,Tm@NaYF₄ up-conversion nanoparticles (UCNPs) at 980 nm excitation. The up-conversion luminescence of NaYF₄:Yb³⁺,Tm³⁺@NaYF₄/CsPb(Br_1-x/I_x)₃ composite demonstrates that the radiative photon reabsorption process is accountable for the UC energy transfer from excited levels of Tm³⁺-based UCNPs to PeNCs. The long-lived Tm³⁺ states feed PeNCs carriers with intrinsic lifetimes extending from nanoseconds to microseconds. By varying the UCNPs/PeNCs concentration ratio, the NaYF₄:Yb³⁺,Tm³⁺@NaYF₄/CsPb(Br_0.55I_0.45)₃ composite generates UC white light emission. The near-infrared excited white light-emitting devices are more compatible with human tissues than blue light-excited ones. Therefore, the prototype of UC white light-emitting diode is developed by coupling the UCNPs/PeNCs composite coated glass plate onto a commercial 940 nm-light-emitting diode chip. To overcome the counterfeiting risk that arises in the case of a single fluorescence mode, we developed a simple dual-model strategy based on manipulation of UC and down-conversion luminescence in anti-counterfeiting under 980 nm and 365 nm excitation, which makes it difficult to encrypt the information. In addition, the UCNPs/PeNCs composite exhibited better photostability under near-infrared illumination, retaining 85% of initial photoluminescence intensity, solving the problem of photo-instability.     

Engineered Upconversion Nanoparticles for Resolving Protein Interactions inside Living Cells

Upconversion nanoparticles (UCNPs) convert near‐infrared into visible light at much lower excitation densities than those used in classic two‐photon absorption microscopy. Here, we engineered <50 nm UCNPs for application as efficient lanthanide resonance energy transfer (LRET) donors inside living cells. By optimizing the dopant concentrations and the core–shell structure for higher excitation densities, we observed enhanced UCNP emission as well as strongly increased sensitized acceptor fluorescence. For the application of these UCNPs in complex biological environments, we developed a biocompatible surface coating functionalized with a nanobody recognizing green fluorescent protein (GFP). Thus, rapid and specific targeting to GFP‐tagged fusion proteins in the mitochondrial outer membrane and detection of protein interactions by LRET in living cells was achieved.     

Upconversion nanoparticle-based fluorescence resonance energy transfer assay for Cr(III) ions in urine

A novel assay of chromium(III) ion based on upconversion fluorescence resonance energy transfer was designed and established. Lysine-capped NaYF₄:Yb/Er upconversion nanoparticles (UCNPs) and dimercaptosuccinic acid-capped gold nanoparticles (AuNPs) were used as the energy donor and acceptor, respectively. They were bound together via electrostatic interaction, resulting in the quenching of the fluorescence of UCNPs by AuNPs. Chromium(III) ions can specifically and strongly interact with dimercaptosuccinic acid that was modified on the surface of AuNPs, leading to the separation of AuNPs from UCNPs and the recovery of fluorescence of UCNPs. The fluorescence recovery of UCNPs showed a good linear response to Cr³⁺ concentration in the range of 2–500 nM with a detection limit of 0.8 nM. This method was further applied to determine the levels of Cr³⁺ in urine. Compared with other fluorescence methods, current method displayed very high sensitivity and signal-to-noise ratio because of the excitation of near-infrared that can eliminate autofluorescence, providing a promising examination of biological samples for the diagnostic purposes.     

Upconversion nanomaterials: a platform for biosensing,theranostic and photoregulation

Upconversion nanoparticles (UCNPs) are a kind of unique optical material, that are able to emit ultraviolet (UV), visible or near infrared (NIR) luminescence upon NIR light excitation. Because of their excellent physic-chemical characters including enormous anti-Stokes spectral shift, high resistance to photobleaching, fairly long luminescent lifetime, excellent chemical stability, sharp emission band, and deep tissue penetration depth, UCNPs have become a useful tool in bioimaging, biosensing, as well as cancer therapy. In particularly, the emissions light from UCNPs can activate photosensitive molecules, which has the potential to realize the regulation of cell behaviors, including cell growth, adhesion and differentiation. This review consequently introduces the principle and achievements of UCNPs in biomedical field to the general readers for promoting both fundamental research and bio-applications of UCNPs. After the brief introduction of the physical mechanism of upconversion luminescence (UCL), we introduce several strategies to enhance the emissions brightness in detail, then discuss various biomedical applications of UCNPs.     

上转换纳米粒子结合DNA链式扩增技术在阿霉素光控释放中的应用

纳米技术的发展使得纳米材料可以通过不同的表面包覆和修饰而在生物医药中发挥应用。 构建简单、经济、药物释放可控的生物相容性纳米药物仍是纳米生物化学领域的重点。 我们构建的纳米载药体系(DDS)以NaYF₄：Yb/Tm上转换纳米粒子为载体,在其表面通过光致断键型小分子4,5-二甲氧基-2-硝基苯基乙酮(DMNPE)连接一段短单链DNA,利用DNA链式扩增技术(HCR)来调节纳米粒子最终修饰的双链DNA的总量,从而控制对抗癌药物阿霉素(Dox)的担载量,在980 nm激光照射下上转换纳米粒子发射可切断DMNPE连接的近紫外光,协同胞内DNA酶的作用达到对药物的可控释放。 由于近红外光照对生物组织具有较好的穿透能力,此体系能够对病灶位置有更好的光靶向性从而减少药物的毒副作用。     

Full-color quantum dots active matrix display fabricated by ink-jet printing

Making full-color active matrix display based on quantum dot light emitting diodes(AM-QLEDs) via ink-jet printing is attractive in display industry due to QLEDs' wide color gamut and their potential manufacturing advantages of large screen size and low cost. The challenges for realizing AM-QLED display are how to achieve high quality films through ink-jet printing, multi-color patterning, electroluminescence(EL) color purity, and high efficiency. Herein, a 2-inch diagonal full-color AM-QLEDs display with pixel density of 120 pixels per inch(PPI) fabricated by ink-jet printing technique is presented. Driven by a metal oxide TFT(MOTFT) back-panel, the display exhibits a maximum brightness of 400 cd m.2, and a color gamut of 109%(NTSC 1931). The red, green, and blue(RGB) monochrome QLEDs passive matrix panels fabricated by ink-jet printing technique have a current efficiency(CE) of 2.5, 13.9, and 0.30 cd A.1, respectively. To the best of our knowledge, the efficiencies are the highest among passive matrix QLEDs panels made by ink-jet printing technique. The ink-jet printed QDs films show good thickness uniformity due to high viscosity and low volatility of the printable inks, and no cross-contamination between adjacent pixels resulting from the hydrophobic pixel defining layer.     

Upconversion nanophosphors for use in bioimaging, therapy, drug delivery and bioassays

Upconversion nanoparticles (UCNPs) represent a new class of fluorophores. Both the excitation and (anti-Stokes) emission wavelengths are in the long wave part of the spectrum so that their luminescence can deeply penetrate tissues and cause low photodamage in biological samples. Their large anti-Stokes shifts, sharp emission bands, zero auto-fluorescence from biological samples and high photostability renders them an ideal kind of fluorescent labels for a variety of analytical formats, for bioimaging in cancer therapy. This review covers the basic mechanisms of up-conversion luminescence, the methods for the synthesis and surface modification of biocompatible UCNPs, and aspects of the in vivo delivery of UCNPs. More specifically, we discuss (a) recent progress regarding UCNPs for multimodal targeted tumor imaging, (b) UCNP-based methods of biological detection and sensing, (c) the use of UCNPs in drug delivery, (d) applications in photodynamic therapy, photothermal therapy and radiotherapy. Finally, we are addressing challenges and opportunities of this quickly emerging field. Contains 362 references.

Upconverting nanophosphors as reporters in a highly sensitive heterogeneous immunoassay for cardiac troponin I

Photon upconverting nanophosphors (UCNPs) have a unique capability to produce anti-Stokes emission at visible wavelengths via sequential multiphoton absorption upon infrared excitation. Since the anti-Stokes emission can be easily spectrally resolved from the Stokes' shifted autofluorescence, the upconversion luminescence (UCL) is a highly attractive reporter technology for optical biosensors and biomolecular binding assays – potentially enabling unprecedented sensitivity in separation-based solid-phase immunoassays.     

Luminescent Ink Based on Upconversion of NaYF4:Er,Yb@MA Nanoparticles: Environmental Friendly Synthesis and Structural and Spectroscopic Assessment

NaYF₄:Er,Yb upconversion luminescent nanoparticles (UCNPs) were prepared by hydrothermal methods at 180 °C for 24 h. The X-ray diffraction (XRD) and TEM (transmission electron microscopy) images show that the resulting 60 nm UCNPs possess a hexagonal structure. In this work, maleic anhydride (MA) was grafted on the surface of UCNPs to induce hydrophilic properties. The photoluminescence spectra (PL) show upconversion emissions centered around 545 nm and 660 nm under excitation at 980 nm. The luminescent inks, including UCNPs@MA, polyvinyl alcohol (PVA), deionized water (DI), and ethylene glycol (EG), exhibit suitable properties for screen printing, such as high stability, emission intensity, and tunable dynamic viscosity. The printed patterns with a height of 5 mm and a width of 1.5 mm were clearly observed under the irradiation of a 980 nm laser. Our strategy provides a new route for the controlled synthesis of hydrophilic UCNPs, and shows that the UCNPs@MAs have great potential in applications of anti-counterfeiting packing.