A Bipolar and Self‐Polymerized Phthalocyanine Complex for Fast and Tunable Energy Storage in Dual‐Ion Batteries

Bipolar redox organics have attracted interest as electrode materials for energy storage owing to their flexibility, sustainability and environmental friendliness. However, an understanding of their application in all‐organic batteries, let alone dual‐ion batteries (DIBs), is in its infancy. Herein, we propose a strategy to screen a variety of phthalocyanine‐based bipolar organics. The self‐polymerizable bipolar Cu tetraaminephthalocyanine (CuTAPc) shows multifunctional applications in various energy storage systems, including lithium‐based DIBs using CuTAPc as the cathode material, graphite‐based DIBs using CuTAPc as the anode material and symmetric DIBs using CuTAPc as both the cathode and anode materials. Notably, in lithium‐based DIBs, the use of CuTAPc as the cathode material results in a high discharge capacity of 236 mAh g^?1 at 50 mA g^?1 and a high reversible capacity of 74.3 mAh g^?1 after 4000 cycles at 4 A g^?1. Most importantly, a high energy density of 239 Wh kg^?1 and power density of 11.5 kW kg^?1 can be obtained in all‐organic symmetric DIBs.     

Highly Concentrated Electrolyte towards Enhanced Energy Density and Cycling Life of Dual-Ion Battery

Dual-ion batteries (DIBs) have attracted much attention owing to their low cost, high voltage, and environmental friendliness. As the source of active ions during the charging/discharging process, the electrolyte plays a critical role in the performance of DIBs, including capacity, energy density, and cycling life. However, most used electrolyte systems based on the LiPF₆ salt demonstrate unsatisfactory performance in DIBs. We have successfully developed a 7.5 mol kg⁻¹ lithium bis(fluorosulfonyl)imide (LiFSI) in a carbonate electrolyte system. Compared with diluted electrolytes, this highly concentrated electrolyte exhibits several advantages: 1) enhanced intercalation capacity and cycling stability of the graphite cathode, 2) optimized structural stability of the Al anode, and 3) significantly increased battery energy density. A proof-of-concept DIB based on this concentrated electrolyte exhibits a discharge capacity of 94.0 mAh g⁻¹ at 200 mA g⁻¹ and 96.8 % capacity retention after 500 cycles. By counting both the electrode materials and electrolyte, the energy density of this DIB reaches up to ≈180 Wh kg⁻¹, which is among the best performances of DIBs reported to date.     

Sodium-based dual-ion batteries via coupling high-capacity selenium/graphene anode with high-voltage graphite cathode

Dual ion batteries (DIBs) exhibit broad application prospects in the field of electrical energy storage (EES) devices with excellent properties, such as high voltage, high energy density, and low cost. In the graphite-based DIBs, high voltage is needed to store enough anions with the formation of anion intercalation compound XC_n (X = AlCl₄^-, PF₆^-, TFSI^-, etc.). Hence, it is difficult for graphite-based DIBs to match proper anodes and electrolytes. Here, an Se/graphene composite is prepared via a convenient method, and assembled into a dual-ion full battery (DIFB) as anode with graphite cathode and 1 mol/L NaPF₆ in EC:EMC (1:1, v:v). This DIFB has achieved a high discharge capacity of 75.9 mAh/g and high medium output voltage of 3.5 V at 0.1 A/g. Actually, the suitable anode materials, such as the present Se/graphene composite, are extremely important for the development and application of graphite-based DIBs. This study is enlightening for the design of future low-cost EES devices including graphite-based DIBs.     

A Computational Study of a Single‐Walled Carbon‐Nanotube‐Based Ultrafast High‐Capacity Aluminum Battery

Exploring suitable electrode materials is a fundamental step toward developing Al batteries with enhanced performance. In this work, we explore using density functional theory calculations the feasibility of single‐walled carbon nanotubes (SWNTs) as a cathode material for Al batteries. Carbon nanotubes with hollow structures and large surface area are able to overcome the difficulty of activating the opening of interlayer spaces as observed in graphite electrode during the first intercalation cycle. Our results show that AlCl₄ binds strongly with the SWNT to result in an energetically and thermally stable AlCl₄‐adsorbed SWNT system. Diffusion calculations show that the SWNT system allows ultrafast diffusion of AlCl₄ with a more favorable inner surface diffusion than outer surface diffusion. Our charge‐density difference and Bader atomic charge analysis confirm the oxidation of SWNT upon adsorption of AlCl₄, which shows a similar behavior to the previously studied graphite cathode. The average open‐circuit voltage and AlCl₄ storage capacity increases with increasing SWNT diameter and can be as high as 1.96 V and 275 mA h g⁻¹ in (25,25) SWNT relative to graphite (70 mA h g⁻¹). All of these properties show that SWNTs are a potential cathode material for high‐performance Al batteries and should be explored further.     

Anion-Dependent Redox Chemistry of p-Type Poly(vinyldimethylphenazine) Cathode Materials

Metal-free organic electrode materials have attracted vast research attention owing to their designable structures and tunable electrochemical properties. Although n-type cathode materials could be used in various metal-ion batteries, p-type ones with high potential can deliver high energy density. Herein, we report a new p-type polymeric cathode material, poly(2-vinyl-5,10-dimethyl-dihydrophenazine) (PVDMP), with a theoretical capacity of 227 mAh g⁻¹. PVDMP featuring two-step redox reaction will be doped by two anions to maintain electroneutrality during oxidation, which resulted in an anion-dependent electrochemical behavior of PVDMP-based cathode. The suitable dopant anion for PVDMP was selected and the doping mechanism was confirmed. Under the optimized condition, PVDMP cathode can deliver a high initial capacity of 220 mAh g⁻¹ at 5 C and even remains 150 mAh g⁻¹ after 3900 cycles. This work not only provides a new kind of p-type organic cathode materials but also deepens the understanding of its anion-dependent redox chemistry.     

Pitch-Based Laminated Carbon Formed by Pressure Driving at Low Temperature as High-Capacity Anodes for Lithium Energy Storage Systems

Pitch has been used to prepare electrodes by high-temperature heat treatments for supercapacitors, lithium-ion batteries, on account of its rich aromatic ring structure. Here, the toluene-soluble component of pitch is used to prepare a kind of laminated carbon. This was realized by a template-free synthesis at low temperature with the addition of pressure. The toluene-soluble component has a small molecular weight, which makes the thermal deformation ability stronger and then enhances the orientation of the carbon layer with the help of pressure. The prepared anode exhibits a splendid electrochemical performance compared with the traditional graphite anode. A high stable capacity of approximately 550 mAh g⁻¹ at 50 mA g⁻¹, which is much higher than graphite (372 mAh g⁻¹), is obtained. Also, when the current density is up to 2 A g⁻¹, the capacity is about 150 mAh g⁻¹. Surprisingly, it also delivers a superior cycling performance. And when used as the anode/cathode electrode for lithium-ion capacitors, a high energy density can be obtained. The present work offers an opportunity to utilize the pitch source in lithium energy storage with promising cycle life, high energy/power density, and low cost.     

Cover Feature: Reverse Dual-Ion Battery Enabled by Reversing the Cation/Anion Storage Mechanism in an Aqueous ZnCl2 Water-in-Salt Electrolyte (ChemPhysChem 14/2023)

Dual ion batteries (DIBs) have garnered significant attention from researchers due to their unique ability to store charges using electrolyte-born ions, making them promising candidates for grid storage applications. However, despite extensive efforts to explore DIBs with various electrolytes, such as organic, aqueous, gel polymer etc., challenges such as electrolyte decomposition and poor stability of anode materials in aqueous electrolytes remain unresolved. To address these issues, we report a novel approach utilizing a flip-cum-reverse sequence of anion/cation storage chemistry in a ZnCl₂ water-in-salt electrolyte (ZnCl₂-WiSE)-based reverse dual ion battery (RDIB), employing Zn-based Prussian blue analogue i. e., Zn₃[Fe(CN)₆]₂ and ferrocene-carbon composite (FcC) as cathode and anode electrodes, respectively. The RDIB operates in the opposite direction compared to conventional DIBs, offering a fresh perspective. Through our investigations, we discovered that increasing the concentration of ZnCl₂-WiSE [ZnCl₂-WiSE] resulted in a positive shift of 270 mV in the redox potential for cation/anion (de)insertion at the cathode, and a negative shift of 70 mV at the anode, indicating enhanced performance. Remarkably, the RDIB operate in 10 m ZnCl₂-WiSE exhibited an impressive energy density of 23 Wh kg⁻¹, showcasing the potential of this approach for high-performance energy storage.     

Highly Concentrated Electrolyte towards Enhanced Energy Density and Cycling Life of Dual‐Ion Battery

Dual‐ion batteries (DIBs) have attracted much attention owing to their low cost, high voltage, and environmental friendliness. As the source of active ions during the charging/discharging process, the electrolyte plays a critical role in the performance of DIBs, including capacity, energy density, and cycling life. However, most used electrolyte systems based on the LiPF₆ salt demonstrate unsatisfactory performance in DIBs. We have successfully developed a 7.5 mol kg^?1 lithium bis(fluorosulfonyl)imide (LiFSI) in a carbonate electrolyte system. Compared with diluted electrolytes, this highly concentrated electrolyte exhibits several advantages: 1) enhanced intercalation capacity and cycling stability of the graphite cathode, 2) optimized structural stability of the Al anode, and 3) significantly increased battery energy density. A proof‐of‐concept DIB based on this concentrated electrolyte exhibits a discharge capacity of 94.0 mAh g^?1 at 200 mA g^?1 and 96.8 % capacity retention after 500 cycles. By counting both the electrode materials and electrolyte, the energy density of this DIB reaches up to ≈180 Wh kg^?1, which is among the best performances of DIBs reported to date.     

Anion Storage Chemistry of Organic Cathodes for High-Energy and High-Power Density Divalent Metal Batteries

Multivalent batteries show promising prospects for next-generation sustainable energy storage applications. Herein, we report a polytriphenylamine (PTPAn) composite cathode capable of highly reversible storage of tetrakis(hexafluoroisopropyloxy) borate [B(hfip)₄] anions in both Magnesium (Mg) and calcium (Ca) battery systems. Spectroscopic and computational studies reveal the redox reaction mechanism of the PTPAn cathode material. The Mg and Ca cells exhibit a cell voltage >3 V, a high-power density of ∼∼3000 W kg⁻¹ and a high-energy density of ∼∼300 Wh kg⁻¹, respectively. Moreover, the combination of the PTPAn cathode with a calcium-tin (Ca−Sn) alloy anode could enable a long battery-life of 3000 cycles with a capacity retention of 60 %. The anion storage chemistry associated with dual-ion electrochemical concept demonstrates a new feasible pathway towards high-performance divalent ion batteries.     

Isomer Effect on Energy Storage of π-Extended S-Shaped Double[6]Heterohelicene

Recently, chiral and nonplanar cutouts of graphene have been the favorites due to their unique optical, electronic, and redox properties and high solubility compared with their planar counterparts. Despite the remarkable progress in helicenes, π-extended heterohelicenes have not been widely explored. As an anode in a lithium-ion battery, the racemic mixture of π-extended double heterohelical nanographene containing thienothiophene core exhibited a high lithium storage capability, attaining a specific capacity of 424 mAh g⁻¹ at 0.1 A g⁻¹ with excellent rate capability and superior long-term cycling performance over 6000 cycles with negligible fade. As a first report, the π-extended helicene isomer (PP and MM), with the more interlayer distance that helps faster diffusion of ions, has exhibited a high capacity of 300 mAh g⁻¹ at 2 A g⁻¹ with long-term cycling performance over 1500 cycles compared to the less performing MP and PM isomer and racemic mixture (150 mAh g⁻¹ at 2 A g⁻¹). As supported by single-crystal X-ray analysis, a unique molecular design of nanographenes with a fixed (helical) molecular geometry, avoiding restacking of the layers, renders better performance as an anode in lithium-ion batteries. Interestingly, the recycled nanographene anode material displayed comparable performance.     

Utilizing Cationic Vacancies and Spontaneous Polarization on Cathode to Enhance Zinc-Ion Storage and Inhibit Dendrite Growth in Zinc-Ion Batteries

High energy density and intrinsic safety are the central pursuits in developing rechargeable Zinc-ion batteries (ZIBs). The capacity and stability of nickel cobalt oxide (NCO) cathode are unsatisfactory because of its semiconductor character. Herein, we propose a built-in electric field (BEF) approach by synergizing cationic vacancies and ferroelectric spontaneous polarization on cathode side to facilitate electron adsorption and suppress zinc dendrite growth on the anode side. Concretely, NCO with cationic vacancies was constructed to expand lattice spacing for enhanced zinc-ion storage. Heterojunction with BEF leads to the Heterojunction//Zn cell exhibiting a capacity of 170.3 mAh g⁻¹ at 400 mA g⁻¹ and delivering a competitive capacity retention of 83.3 % over 3000 cycles at 2 A g⁻¹. We conclude the role of spontaneous polarization in suppressing zinc dendrite growth dynamics, which is conducive to developing high-capacity and high-safety batteries via tailoring defective materials with ferroelectric polarization on the cathode.     

Proton Intercalation/De-intercalation Chemistry in Phenazine-based Anode for Hydronium-ion Batteries

Hydronium-ion batteries have received significant attention owing to the merits of extraordinary sustainability and excellent rate abilities. However, achieving high-performance hydronium-ion batteries remains a challenge due to the inferior properties of anode materials in strong acid electrolyte. Herein, a hydronium-ion battery is constructed which is based on a diquinoxalino [2,3-a:2’,3’-c] phenazine (HATN) anode and a MnO₂@graphite felt cathode in a hybrid acidic electrolyte. The fast kinetics of hydronium-ion insertion/extraction into HATN electrode endows the HATN//MnO₂@GF battery with enhanced electrochemical performance. This battery exhibits an excellent rate performance (266 mAh g⁻¹ at 0.5 A g⁻¹, 97 mAh g⁻¹ at 50 A g⁻¹), attractive energy density (182.1 Wh kg⁻¹) and power density (31.2 kW kg⁻¹), along with long-term cycle stability. These results shed light on the development of advanced hydronium-ion batteries.     

Nitrogen Doped Carbon Coated Bi Microspheres as High-performance Anode for Half and Full Sodium Ion Batteries

As two-dimensional (2D) materials, bismuth (Bi) has large interlayer spacing along c-axis (0.395 nm) which provides rich active sites for sodium ions, thus guaranteeing high sodium ion storage activity. However, its poor electrical conductivity, combined with its degraded cycling performance, restricts its practical application. Herein, Bi microsphere coated with nitrogen-doped carbon (Bi@NC) was synthesized. Owing to the unique Bi crystals and nitrogen-doped carbon layer, the obtained Bi@NC anode exhibited satisfactory cycling stability and superior rate capability. Moreover, after assembling Bi@NC anode with Na₃V₂(PO₄)₃@C cathode to full battery, excellent sodium storage performance was obtained (57 mA h g⁻¹ after 2000 cycles at 1.0 A g⁻¹).     

Facile Synthesis of Ultra-Small Few-Layer Nanostructured MoSe2 Embedded on N,P Co-Doped Bio-Carbon for High-Performance Half/Full Sodium-Ion and Potassium-Ion Batteries

Sodium/potassium-ion batteries (SIBs/PIBs) arouse intensive interest on account of the natural abundance of sodium/potassium resources, the competitive cost and appropriate redox potential. Nevertheless, the huge challenge for SIBs/PIBs lies in the scarcity of an anode material with high capacity and stable structure, which are capable of accommodating large-size ions during cycling. Furthermore, using sustainable natural biomass to fabricate electrodes for energy storage applications is a hot topic. Herein, an ultra-small few-layer nanostructured MoSe₂ embedded on N, P co-doped bio-carbon is reported, which is synthesized by using chlorella as the adsorbent and precursor. As a consequence, the MoSe₂/NP-C-2 composite represents exceedingly impressive electrochemical performance for both sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs). It displays a promising reversible capacity (523 mAh g⁻¹ at 100 mA g⁻¹ after 100 cycles) and impressive long-term cycling performance (192 mAh g⁻¹ at 5 A g⁻¹ even after 1000 cycles) in SIBs, which are some of the best properties of MoSe₂-based anode materials for SIBs to date. To further probe the great potential applications, full SIBs pairing the MoSe₂/NP-C-2 composite anode with a Na₃V₂(PO₄)₃ cathode also exhibits a satisfactory capacity of 215 mAh g⁻¹ at 500 mA g⁻¹ after 100 cycles. Moreover, it also delivers a decent reversible capacity of 131 mAh g⁻¹ at 1 A g⁻¹ even after 250 cycles for PIBs.     

Dual Dopamine Derived Polydopamine Coated N-Doped Porous Carbon Spheres as a Sulfur Host for High-Performance Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries are considered to be one of the most promising energy storage systems owing to their high energy density and low cost. However, their wide application is still limited by the rapid capacity fading. Herein, polydopamine (PDA)-coated N-doped hierarchical porous carbon spheres (NPC@PDA) are reported as sulfur hosts for high-performance Li-S batteries. The NPC core with abundant and interconnected pores provides fast electron/ion transport pathways and strong trapping ability towards lithium polysulfide intermediates. The PDA shell could further suppress the loss of lithium polysulfide intermediates through polar–polar interactions. Benefiting from the dual function design, the NPC/S@PDA composite cathode exhibits an initial capacity of 1331 mAh g⁻¹ and remains at 720 mAh g⁻¹ after 200 cycles at 0.5 C. At the pouch cell level with a high sulfur mass loading, the NPC/S@PDA composite cathode still exhibits a high capacity of 1062 mAh g⁻¹ at a current density of 0.4 mA cm⁻².     

An Amorphous Molybdenum Polysulfide Cathode for Rechargeable Magnesium Batteries

Rechargeable magnesium batteries (RMBs) attract research interest owing to the low cost and high reliability, but the design of cathode materials is the major difficulty of their development. The bivalent magnesium cation suffers from a strong interaction with the anion and is difficult to intercalate into traditional magnesium intercalation cathodes. Herein, an amorphous molybdenum polysulfide (a-MoS_x) is synthesized via a simple one-step solvothermal reaction and used as the cathode material for RMBs. The a-MoS_x cathode provides a high capacity (185 mAh g⁻¹) and a good rate performance (50 mAh g⁻¹ at 1000 mA g⁻¹), which are much superior compared with crystalline MoS₂ and demonstrate the privilege of amorphous RMB cathodes. A mechanism study demonstrates both of molybdenum and sulfur undergo redox reactions and contribute to the capacity. Further optimizations indicate low-temperature synthesis would favor the magnesium storage performance of a-MoS_x.     

Highly Stable Aqueous Zinc‐Ion Storage Using a Layered Calcium Vanadium Oxide Bronze Cathode

Cost‐effective aqueous rechargeable batteries are attractive alternatives to non‐aqueous cells for stationary grid energy storage. Among different aqueous cells, zinc‐ion batteries (ZIBs), based on Zn²⁺ intercalation chemistry, stand out as they can employ high‐capacity Zn metal as the anode material. Herein, we report a layered calcium vanadium oxide bronze as the cathode material for aqueous Zn batteries. For the storage of the Zn²⁺ ions in the aqueous electrolyte, we demonstrate that the calcium‐based bronze structure can deliver a high capacity of 340 mA h g^?1 at 0.2 C, good rate capability, and very long cycling life (96 % retention after 3000 cycles at 80 C). Further, we investigate the Zn²⁺ storage mechanism, and the corresponding electrochemical kinetics in this bronze cathode. Finally, we show that our Zn cell delivers an energy density of 267 W h kg^?1 at a power density of 53.4 W kg^?1.     

A ZIF-8 Host for Dendrite-Free Zinc Anodes and N,O Dual-doped Carbon Cathodes for High-Performance Zinc-Ion Hybrid Capacitors

Zn is a promising anode for aqueous energy storage owing to it intrinsic superior properties such as large capacity, abundant reserves, low potential and safety. But, the growth of dendrites during charge and discharge leads to a decrease in reversibility. In addition, further development of zinc-ion hybrid capacitors (ZICs) is seriously challenging because of the lack of an exceptional cathode. Herein, we use ZIF-8 annealed at 500 °C (annealed ZIF-8) as a host material for stable and dendrite-free Zn anodes. Utilization of annealed ZIF-8 results in dendrite-free Zn deposition and stripping as a result of its porous construction, which contains trace Zn. Furthermore, we firstly proposed innovative N,O dual-doped carbon which was designed by the derived ZIF-8 (ZIF-8 derived C) as cathode for high-energy and power-density ZICs. The new ZIC assembled by Zn@annealed ZIF-8 anode and ZIF-8 derived C cathode provides a capacity of 135.5 mAh g⁻¹ and an energy density of 108.4 Wh kg⁻¹ with a power density of 800 W kg⁻¹ at 1.0 A g⁻¹. In addition, it shows outstanding cycling stability of 91% capacity retention after 6000 cycles at 5.0 A g⁻¹. Moreover, the solid-state ZICs can drive LEDs and smart watches. This ZIC holds promise for the practical application of supercapacitors.     

Carbonyl-rich Poly(pyrene-4,5,9,10-tetraone Sulfide) as Anode Materials for High-Performance Li and Na-Ion Batteries

Organic carbonyl electrode materials are widely employed for alkali metal-ion secondary batteries in terms of their sustainability, structure designability and abundant resources. As a typical redox-active organic electrode materials, pyrene-4, 5, 9, 10-tetraone (PT) shows high theoretical capacity due to the rich carbonyl active sites. But its electrochemical behavior in secondary batteries still needs further exploration. Herein, PT-based linear polymers (PPTS) is synthesized with thioether bond as bridging group and then employed as an anode material for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). As expected, PPTS shows improved conductivity and insolubility in the non-aqueous electrolyte. When used as an anode material for LIBs, PPTS delivers a high reversible specific capacity of 697.1 mAh g⁻¹ at 0.1 A g⁻¹ and good rate performance (335.4 mAh g⁻¹ at 1 A g⁻¹). Moreover, a reversible specific capacity of 205.2 mAh g⁻¹ at 0.05 A g⁻¹ could be obtained as an anode material for SIBs.     

Hydrothermally synthesized highly efficient binary silver strontium sulfide (AgSrS) for high-performance supercapattery applications

The increasing demand for sustainable energy has diverted researchers’ intentions toward electrochemical storage devices. This research aims to combine supercapacitors’ characteristics with batteries to create high-performance hybrid energy storage devices. The hydrothermal approach is used to synthesize silver sulfide (Ag₂S), strontium sulfide (SrS), and their composite silver strontium sulfide (AgSrS). XRD is used to evaluate the crystallinity, SEM is used to study the surface morphology, and XPS is used to determine the elemental composition of AgSrS. The BET measurements show a higher surface area of 22.23 m²g⁻¹ for AgSrS. The highest achieved specific capacity with AgSrS is 494.5 C g⁻¹ (137.36 mAh-g⁻¹). The best-tuned material, AgSrS, is then used as the anode in a powered hybrid device with activated carbon (A.C.) as the cathode terminal. This device provides an energy of 26.32 Wh-kg⁻¹ at a power of 800 W kg⁻¹. The device was also put through a durability test, which included 5000 consecutive cycles. After 5000 cycles, a columbic efficiency of 82% was achieved, with 96% capacity retention. This research shows that the composite material AgSrS can be utilized commercially for hybrid energy storage devices in the future.