Mg(C3O4H2)(H2O)2: A New Ultraviolet Nonlinear Optical Material Derived from KBe2BO3F2 with High Performance and Excellent Water-Resistance

Acquiring high-performance ultraviolet (UV) nonlinear optical (NLO) materials that simultaneously exhibit a strong second harmonic generation (SHG) coefficients, as short as possible SHG phase-matching (PM) wavelength and non-hygroscopic properties has consistently posed a significant challenge. Herein, through multicomponent modification of KBe₂BO₃F₂ (KBBF), an excellent UV NLO crystal, Mg(C₃O₄H₂)(H₂O)₂, was successfully synthesized in malonic system. This material possesses a unique 2D NLO-favorable electroneutral [Mg(C₃O₄H₂)₃(H₂O)₂]_∞ layer, resulting in the rare coexistence of a strong SHG response of 3×KDP (@1064 nm) and short PM wavelength of 200 nm. More importantly, it exhibits exceptional water resistance, which is rare among ionic organic NLO crystals. Theoretical calculations revealed that its excellent water-resistant may be originated from its small available cavity volumes, which is similar to the famous LiB₃O₅ (LBO). Therefore, excellent NLO properties and stability against air and moisture indicate it should be a promising UV NLO crystal.     

Electrochemical Conversion of CO2 to Syngas with Controllable CO/H2 Ratios over Co and Ni Single-Atom Catalysts

The electrochemical CO₂ reduction reaction (CO₂RR) to yield synthesis gas (syngas, CO and H₂) has been considered as a promising method to realize the net reduction in CO₂ emission. However, it is challenging to balance the CO₂RR activity and the CO/H₂ ratio. To address this issue, nitrogen-doped carbon supported single-atom catalysts are designed as electrocatalysts to produce syngas from CO₂RR. While Co and Ni single-atom catalysts are selective in producing H₂ and CO, respectively, electrocatalysts containing both Co and Ni show a high syngas evolution (total current >74 mA cm⁻²) with CO/H₂ ratios (0.23–2.26) that are suitable for typical downstream thermochemical reactions. Density functional theory calculations provide insights into the key intermediates on Co and Ni single-atom configurations for the H₂ and CO evolution. The results present a useful case on how non-precious transition metal species can maintain high CO₂RR activity with tunable CO/H₂ ratios.     

Earth Alkaline Tetrathiosquarates: Syntheses and Crystal Structures of MgC4S4 · 6 H2O and CaC4S4 · 4 H2O

Concentrated aqueous solutions of magnesium chloride and calcium nitrate, respectively, allow on addition of the potassium salt of tetrathiosquarate, K₂C₄S₄ · H₂O, the isolation of the earth alkaline salts MgC₄S₄ · 6 H₂O ( 1 ) and CaC₄S₄ · 4 H₂O ( 2 ) as orange and red crystals. The crystal structure determinations ( 1 : monoclinic, C2/c, a = 17.2280(7), b = 5.9185(2), c = 13.1480(4) Å, β = 104.730(3)°, Z = 4; 2 : monoclinic, P2₁/m, a = 7.8515(3), b = 12.7705(5), c = 10.6010(4) Å, β = 93.228(2)°, Z = 4) show the presence of C₄S₄^2? ions with almost undistorted D_4h symmetry having average C–C and C–S bond lengths of 1.451Å and 1.659Å for 1 and 1.451Å and 1.655Å for 2 . The structure of 1 contains discrete, octahedral [Mg(H₂O)₆]²⁺ complexes. Several O–H····O and O–H····S bridges with H····O and H····S distances of less than 2.50Å connect cations and anions. The structure of 2 is built of concatenated, edge‐sharing Ca(H₂O)₆S₂ polyhedra. The Ca²⁺ ions have the coordination number eight, C₄S₄^2? act as a chelating ligands towards Ca²⁺ with Ca–S distances of 3.14Å. The infrared and Raman spectra show bands typical for the molecular building units of the two compounds.     

流化床甲烷/丙烷临氧CO2重整制合成气反应研究

研究了流化床反应器中甲烷、丙烷临氧自热CO2重整制合成气反应中不同催化剂的性能及表面积碳行为，并用热重分析、激光拉曼及透射电镜研究了催化剂表面的积碳物种及积碳量。结果表明，贵金属Pd、Pt由于对烷烃有较强的裂解作用，镍基及贵金属修饰的镍基催化剂表面有大量的纤维状炭生成；碱土和稀土金属改性的镍基催化剂有较好的抗积碳性能，大量碱土金属CaO修饰微球硅胶后负载的镍基催化剂在同等的反应条件下没有发现积碳，碱土金属对催化剂表面碱性的增强是催化剂抗积碳性能提高的原因。     

Reactions of Polyarsenides with Acetylene: Synthesis and Characterization of [Cs([18]crown‐6)]2As7C14H11·6NH3 and As2C6H6

The reaction of Cs₃As₇ with diphenylacetylene in the presence of 18 crown‐6 in liquid ammonia results in the formation of the new compound [Cs( 18 crown‐6)]₂As₇C₁₄H₁₁ · 6NH₃, which crystallizes in black monoclinic crystals. It contains the first monosubstituated heptaarsenide anion with a hydrocarbon‐only substituent and theoretical calculations show a significant influence of the organic substituent on the electronic structure within the cage. The (Z)‐1, 2‐diphenylethenyl‐heptaarsenide di‐anion can be seen as the first step towards the formation of 1, 2,3‐triarsolides. Further experiments regarding the reaction of Rb₃As₁₁ and Cs₃As₁₁ with acetylene gas in liquid ammonia reveal the formation of the diarsabarrelene As₂C₆H₆, which crystallizes as colorless orthorhombic crystals. Calculations based on the structural data obtained by X‐ray crystallography show the electronically inert character of the arsenic lone pair.     

Electrochemical Conversion of CO2 to Syngas with Controllable CO/H2 Ratios over Co and Ni Single‐Atom Catalysts

The electrochemical CO₂ reduction reaction (CO₂RR) to yield synthesis gas (syngas, CO and H₂) has been considered as a promising method to realize the net reduction in CO₂ emission. However, it is challenging to balance the CO₂RR activity and the CO/H₂ ratio. To address this issue, nitrogen‐doped carbon supported single‐atom catalysts are designed as electrocatalysts to produce syngas from CO₂RR. While Co and Ni single‐atom catalysts are selective in producing H₂ and CO, respectively, electrocatalysts containing both Co and Ni show a high syngas evolution (total current >74 mA cm^?2) with CO/H₂ ratios (0.23–2.26) that are suitable for typical downstream thermochemical reactions. Density functional theory calculations provide insights into the key intermediates on Co and Ni single‐atom configurations for the H₂ and CO evolution. The results present a useful case on how non‐precious transition metal species can maintain high CO₂RR activity with tunable CO/H₂ ratios.     

Preparation of Carbon Nanotubes with High Yield and Narrow Diameter Distribution from C2H2 over LaCu0.2Ni0.8Ox

Carbon nanotubes (CNTs) were prepared by decomposition of C2H2 over newly developed LaCu0.2Ni0.8Ox in the temperature range from 600 to 850℃. The effect of the reaction temperature on the yield of CNTs was investigated in detail. At 680℃,the yield of CNTs reaches 17g/g.catal, or so. The morphology of CNTs was examined by TEM. The diameter of CNTs rangs from 9 nm to 14 nm.     

Conversion of CO2 and C2H6 to Propanoic Acid over a Au‐Exchanged MCM‐22 Zeolite

Finding novel catalysts for the direct conversion of CO₂ to fuels and chemicals is a primary goal in energy and environmental research. In this work, density functional theory (DFT) is used to study possible reaction mechanisms for the conversion of CO₂ and C₂H₆ to propanoic acid over a gold‐exchanged MCM‐22 zeolite catalyst. The reaction begins with the activation of ethane to produce a gold ethyl hydride intermediate. Hydrogen transfers to the framework oxygen leads then to gold ethyl adsorbed on the Brønsted‐acid site. The energy barriers for these steps of ethane activation are 9.3 and 16.3 kcal mol^?1, respectively. Two mechanisms of propanoic acid formation are investigated. In the first one, the insertion of CO₂ into the Au?H bond of the first intermediate yields gold carboxyl ethyl as subsequent intermediate. This is then converted to propanoic acid by forming the relevant C?C bond. The activation energy of the rate‐determining step of this pathway is 48.2 kcal mol^?1. In the second mechanism, CO₂ interacts with gold ethyl adsorbed on the Brønsted‐acid site. Propanoic acid is formed via protonation of CO₂ by the Brønsted acid and the simultaneous formation of a bond between CO₂ and the ethyl group. The activation energy there is 44.2 kcal mol^?1, favoring this second pathway at least at low temperatures. Gold‐exchanged MCM‐22 zeolite can therefore, at least in principle, be used as the catalyst for producing propanoic acid from CO₂ and ethane.     

A New Maleato-Bridged Mn(II) Phen Complex: Structure and Magnetic Properties of Mn(phen)(C4H2O4)

Reaction of freshly-precipitated MnCO₃, phenanthroline monohydrate and maleic acid in CH₃OH/H₂O (pH = 6.23) at 50°C afforded a new maleato bridged, catenated coordination polymer Mn(phen)(C₄H₂O₄), where the Mn atoms are each octahedrally coordinated by two N atoms of one phen ligand and four O atoms of three maleato ligands (d(Mn-N) = 2.300, 2.331 Å; d(Mn-O) = 2.112-2.207 Å). The maleato ligand chelates one Mn atom to form a seven membered ring while two carboxylate groups of different maleato ligands bridge two Mn atoms to form an eight-membered ring, 1D ¹ _∞[Mn(phen)(C₄H₂O₄)_3/3] chains being generated in a sequence of seven- and eight-membered rings. Significant interchain π-π stacking interactions are responsible for the supramolecular assembly of the polymeric ¹ _∞[Mn(phen)(C₄H₂O₄)_3/3] chains into 2D layers. At low temperatures, the title complex becomes antiferromagnetic with T _Née1 = 7 K and follows the Curie-Weiss law _χm (T + 9.82) = 4.140 cm³ mol^-1 K between 30-300 K.     

Synthesis, Crystal Structure and Electrochemical Properties of One-dimensional Chain Coordination Polymer [Co(Ⅱ)(C6H5CH=CHCOOH)2(4,4''-bipy)(H2O)5]n

A one-dimensional chain coordination polymer [Co(Ⅱ)(C6H5CH=CHCOOH)2(4,4'-bipy)(H2O)5]n has been synthesized with cinnamylic acid, 4,4'-bipy and cobaltous chloride as raw materials. Crystal data for this complex: monoclinic, space group P21/c, a - 1.1481(3), b =1.1230(2), c = 1.1759(3) nm, β = 97.054(4)°, V = 1.5046(6) nm3, Mr= 617.50, Dc = 1.363 g/cm3, Z= 2, μ(MoKα) = 0.627 mm-1, F(000) = 646, S = 1.062, R 0.0443 and wR = 0.1178. The crystal structure shows that two neighboring cobalt(Ⅱ) ions are linked together by one 4,4'-bipy, and the whole complex molecule adopts a one-dimensional chain structure. Each cobalt(Ⅱ) ion is coordinated with two nitrogen atoms from two 4,4'-bipy molecules and four oxygen atoms from four water molecules, giving a distorted octahedral coordination geometry. The electrochemical properties were analyzed by combining with the crystal structure.     

Preparation,Structure, and Second‐order Nonlinear Optical Properties of a Borate‐Carboxylic Acid Compound: NH4B[d‐(+)‐C4H4O5]2·H2O

The organic‐inorganic hybrid nonlinear optical (NLO) material NH₄B(d‐ (+)‐C₄H₄O₅)₂ · H₂O (NBC) was synthesized in a borate‐carboxylic acid system. Its structure was determined by single crystal X‐ray diffraction. It crystallizes in the orthorhombic system, space group Pna2₁ (No. 33), with cell parameters a = 11.484(6) Å, b = 5.354(3) Å, c = 21.079(12) Å, V = 1296.0(12), Z = 4. It exhibits a three‐dimensional pseudo tunnel structure consisting of fundamental building block [B(d‐ (+)‐C₄H₄O₅)₂]^– anions. The small cavities are occupied by the H₂O molecules and NH₄⁺ cations, which stabilize the whole structure by O–H ··· O and N–H ··· O hydrogen bonds. The powder X‐ray diffraction (PXRD) of the crystal was also recorded. Elemental analyses, FT‐IR and FT‐Raman spectra analyses, thermal analysis, and diffuse‐reflectance spectra for the compound are also presented, as are band structures and density of states calculation. Nonlinear optical measurements indicate that the material has second harmonic generation (SHG) properties and is phase‐matchable.     

Electrochemical Amination in the System Ti(IV)–NH2OH–C6H6: The Efficiency of the Process in a Sulfuric Acid Solution Containing an Organic Solvent

Electrolysis of the system Ti(IV)–NH₂OH–C₆H₆ in an 11 M H₂SO₄ solution shows that using an organic solvent (acetic acid, acetonitrile) during cathodically initiated amination of aromatic substrates permits the production of aromatic amines with the overall yield by hydroxylamine reaching 91%. Due to a chain mechanism of radical substitution, the benzene amination in electrolytes containing 5 M CH₃COOH and 5.5 M CH₃CN terminates largely upon consuming 70–75 and 50–55% of the charge required theoretically for a one-electron process. The maximum efficiency of electrochemical amination is observed at low hydroxylamine conversions and the overall current efficiency for mono- and disubstituted products of the benzene amination may exceed in these conditions 750%.     

Synthesis,crystal structure,vibrational, optical properties,and a theoretical study of a new Pb(II) complex with bis(1-methylpiperazine-1,4-diium): [C5H14N2]2PbCl6·3H2O

An investigation of the solid-state X-ray structure of the new organic–inorganic compound [C₅H₁₄N₂]₂PbCl₆·3H₂O shows a layered organization of the (PbCl₆)^4– anions, with (R₂NH₂)⁺ groups and water molecules developed in the [001 A. Hu, H.L. Ngo, W. Lin. J. Am. Chem. Soc., 125, 11490 (2003).[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]] plane at x = (2n?+?1)/4. The crystal structure is stabilized by N???H···Cl, N???H···O, O???H···Cl, O???H···O, and C???H···Cl hydrogen bonds. The powder X-ray diffraction and X-ray photoelectron spectroscopic (XPS) analyses confirm the phase purity of the crystal sample. The intermolecular contacts are quantified using the Hirshfeld surfaces computational method. The major inter-contacts contributing to the Hirshfeld surfaces are H…Cl, H…H, and O…H. The vibrational modes were identified and assigned by IR and Raman spectroscopies. The optical properties were investigated by UV–visible and photoluminescence spectroscopic studies. The compound was characterized by thermal analysis to determine its thermal behavior with respect to the temperature. Finally, X-ray photoelectron spectroscopy analysis is reported for analyzing the surface chemistry of [C₅H₁₄N₂]₂PbCl₆·3H₂O.     

Nitrogen‐Doped Carbon Nanotube Arrays for High‐Efficiency Electrochemical Reduction of CO2: On the Understanding of Defects,Defect Density,and Selectivity

Nitrogen‐doped carbon nanotubes (NCNTs) have been considered as a promising electrocatalyst for carbon‐dioxide‐reduction reactions, but two fundamental chemistry questions remain obscure: 1) What are the active centers with respect to various defect species and 2) what is the role of defect density on the selectivity of NCNTs? The aim of this work is to address these questions. The catalytic activity of NCNTs depends on the structural nature of nitrogen in CNTs and defect density. Comparing with pristine CNTs, the presence of graphitic and pyridinic nitrogen significantly decreases the overpotential (ca. −0.18 V) and increases the selectivity (ca. 80 %) towards the formation of CO. The experimental results are in congruent with DFT calculations, which show that pyridinic defects retain a lone pair of electrons that are capable of binding CO₂. However, for graphitic‐like nitrogen, electrons are located in the π* antibonding orbital, making them less accessible for CO₂ binding.     

The Influence of the Ligands Cp*(η5‐C5Me5) and Cp(η5‐C5H5) on the Stability and Reactivity of Titanocene and Zirconocene Complexes: Reactions of the Bis(trimethylsilyl)acetylene Permethylmetallocene Complexes (η5‐C5Me5)2M(η2‐Me3SiC2SiMe3), M = Ti,Zr, with H2O and CO2

The reactions of the bis(trimethylsilyl)acetylene permethylmetallocene complexes CpM(η²‐Me₃SiC₂SiMe₃) (M = Ti ( 1 ), M = Zr ( 2 )) with H₂O and CO₂ were studied and compared to those of the corresponding metallocene complexes Cp₂M(L)(η²‐Me₃SiC₂SiMe₃) (M = Ti ( 3 ), L = – ; M = Zr, L = THF ( 4 )) to understand the influence of the ligands Cp(η⁵‐C₅H₅) and Cp*(η⁵‐C₅Me₅) as well as the metals titanium and zirconium on the reaction pathways and the obtained products. In the reaction of the permethyltitanocene complex 1 with water the dihydroxy complex CpTi(OH)₂ ( 5 ) was formed. This product differs from the well‐known titanoxane Cp₂TiOTiCp₂ which was obtained by the reaction of the corresponding titanocene complex 3 with water. The reaction of the permethylzirconocene complex 2 with water gives the mononuclear alkenyl zirconocene hydroxide 6 . An analogous product was assumed as the first step in the reaction of the corresponding zirconocene complex 4 with water which ends up in a dinuclear zirconoxane. In the conversion of the permethylzirconocene complex 2 with carbon dioxide the mononuclear insertion product 7 was formed by coupling of carbon dioxide and the acetylene. In contrast, the corresponding zirconocene complex 4 affords, by an analogous reaction, a dinuclear complex. In additional experiments the known complex CpZr(η²‐PhC₂SiMe₃) ( 8 ) was prepared, starting from CpZrCl₂ and Mg in the presence of PhC≡CSiMe₃. This complex reacts with carbon dioxide resulting in a mixture of the regioisomeric zirconafuranones 9 a and 9 b . From these in the complex 9 a , having the SiMe₃ group in β‐position to the metal, the Zr–C bond was quickly hydrolyzed by water to give the complex CpZr(OH)OC(=O)–C(SiMe₃)=CHPh ( 10 a ) compared to complex ( 9 b ) which gives slowly the complex CpZr(OH)OC(=O)–CPh=CH(SiMe₃) ( 10 b ).     

Nitrogen‐Doped Carbon Nanotube Arrays for High‐Efficiency Electrochemical Reduction of CO2: On the Understanding of Defects,Defect Density,and Selectivity

Nitrogen‐doped carbon nanotubes (NCNTs) have been considered as a promising electrocatalyst for carbon‐dioxide‐reduction reactions, but two fundamental chemistry questions remain obscure: 1) What are the active centers with respect to various defect species and 2) what is the role of defect density on the selectivity of NCNTs? The aim of this work is to address these questions. The catalytic activity of NCNTs depends on the structural nature of nitrogen in CNTs and defect density. Comparing with pristine CNTs, the presence of graphitic and pyridinic nitrogen significantly decreases the overpotential (ca. ?0.18 V) and increases the selectivity (ca. 80 %) towards the formation of CO. The experimental results are in congruent with DFT calculations, which show that pyridinic defects retain a lone pair of electrons that are capable of binding CO₂. However, for graphitic‐like nitrogen, electrons are located in the π* antibonding orbital, making them less accessible for CO₂ binding.     

二维层状磷酸亚磷酸钒(Ⅳ)化合物[V2O2(OH)(HPO3)(HPO3)0.7(PO3OH)0.3].(C6N2H16)0.5的水热合成与结构表征

迄今, 在中温水热条件下已合成了大量具有空旷骨架结构的过渡金属磷酸盐微孔材料[1], 这类材料在非线性光学材料、磁性材料、超导材料及催化等诸多方面具有潜在的应用前景[2～5].