An Alkene‐Promoted Borane‐Catalyzed Highly Stereoselective Hydrogenation of Alkynes to Give Z‐ and E‐Alkenes

The stereoselective hydrogenation of alkynes to alkenes is an extremely useful transformation in synthetic chemistry. Despite numerous reports for the synthesis of Z‐alkenes, the hydrogenation of alkynes to give E‐alkenes is still not well resolved. In particular, selective preparation of both Z‐ and E‐alkenes by the same catalytic hydrogenation system using molecular H₂ has rarely been reported. In this paper, a novel strategy of using simple alkenes as promoters for the HB(C₆F₅)₂‐catalyzed metal‐free hydrogenation of alkynes was adopted. Significantly, both Z‐ and E‐alkenes can be furnished by hydrogenation with molecular H₂ in high yields with excellent stereoselectivities. Further experimental and theoretical mechanistic studies suggest that interactions between H and F atoms of the alkene promoter, borane intermediate, and H₂ play an essential role in promoting the hydrogenolysis reaction.     

Application of carbon-13 n.m.r. Spectroscopy to the structural investigation of ezomycins

Ezomycins A₁, A₂, B₁, B₂, C₁, C₂, D₁ and D₂, antifungal antibiotics, are anhydrooctose uronic acid nucleosides. Their novel structures were confirmed by studying their natural abundance ¹³C n.m.r. spectra in detail from gated proton-decoupled, long-range selective proton-decoupled and selective proton-decoupled spectra. The J(CH) value of the anomeric carbon signal (C-1″) supports the β-configuration.     

Manganese(I)‐Catalyzed β‐Methylation of Alcohols Using Methanol as C1 Source

Highly selective β‐methylation of alcohols was achieved using an earth‐abundant first row transition metal in the air stable molecular manganese complex [Mn(CO)₂Br[HN(C₂H₄PⁱPr₂)₂]] 1 ([HN(C₂H₄PⁱPr₂)₂]=MACHO‐ⁱPr). The reaction requires only low loadings of 1 (0.5 mol %), methanolate as base and MeOH as methylation reagent as well as solvent. Various alcohols were β‐methylated with very good selectivity (>99 %) and excellent yield (up to 94 %). Biomass derived aliphatic alcohols and diols were also selectively methylated on the β‐position, opening a pathway to “biohybrid” molecules constructed entirely from non‐fossil carbon. Mechanistic studies indicate that the reaction proceeds through a borrowing hydrogen pathway involving metal–ligand cooperation at the Mn‐pincer complex. This transformation provides a convenient, economical, and environmentally benign pathway for the selective C?C bond formation with potential applications for the preparation of advanced biofuels, fine chemicals, and biologically active molecules     

Manganese(I)-Catalyzed β-Methylation of Alcohols Using Methanol as C1 Source

Highly selective β-methylation of alcohols was achieved using an earth-abundant first row transition metal in the air stable molecular manganese complex [Mn(CO)₂Br[HN(C₂H₄PⁱPr₂)₂]] 1 ([HN(C₂H₄PⁱPr₂)₂]=MACHO-ⁱPr). The reaction requires only low loadings of 1 (0.5 mol %), methanolate as base and MeOH as methylation reagent as well as solvent. Various alcohols were β-methylated with very good selectivity (>99 %) and excellent yield (up to 94 %). Biomass derived aliphatic alcohols and diols were also selectively methylated on the β-position, opening a pathway to “biohybrid” molecules constructed entirely from non-fossil carbon. Mechanistic studies indicate that the reaction proceeds through a borrowing hydrogen pathway involving metal–ligand cooperation at the Mn-pincer complex. This transformation provides a convenient, economical, and environmentally benign pathway for the selective C−C bond formation with potential applications for the preparation of advanced biofuels, fine chemicals, and biologically active molecules     

Proline‐Modified Porphyrin Catalysts for Enantioselective Epoxidations: Design,Synthesis, and Reactivity

The syntheses of various strapped and ‘picket‐fence’ chiral porphyrins are described, and their reactivities towards the enantioselective epoxidation of alkenes are reported. Four L ‐proline residues provide the chirality for the various meso‐substituted catalysts, which differ by either the spatial arrangement of the stereogenic centers or the nature and length of the straps. The resulting bridged structures possess four amide linkages in each strap, leading to highly rigid molecules with well‐defined geometries whereas the strapped Fe catalysts gave rise to only moderate enantioselectivities, the C₂‐symmetrical ones being superior to the D₂‐symmetrical compounds. The D₂‐symmetrical ‘picket‐fence’ porphyrins were as selective as their strapped counterparts.     

Encapsulation of Palladium Carbide Subnanometric Species in Zeolite Boosts Highly Selective Semihydrogenation of Alkynes

The selective hydrogenation of alkynes to alkenes is a crucial step in the synthesis of fine chemicals. However, the widely utilized palladium (Pd)-based catalysts often suffer from poor selectivity. In this work, we demonstrate a carbonization-reduction method to create palladium carbide subnanometric species within pure silicate MFI zeolite. The carbon species can modify the electronic and steric characteristics of Pd species by forming the predominant Pd−C₄ structure and, meanwhile, facilitate the desorption of alkenes by forming the Si−O−C structure with zeolite framework, as validated by the state-of-the-art characterizations and theoretical calculations. The developed catalyst shows superior performance in the selective hydrogenation of alkynes over mild conditions (298 K, 2 bar H₂), with 99 % selectivity to styrene at a complete conversion of phenylacetylene. In contrast, the zeolite-encapsulated carbon-free Pd catalyst and the commercial Lindlar catalyst show only 15 % and 14 % selectivity to styrene, respectively, under identical reaction conditions. The zeolite-confined Pd-carbide subnanoclusters promise their superior properties in semihydrogenation of alkynes.     

Highly Selective Phosphinylphosphination of Alkenes with Tetraphenyldiphosphine Monoxide

In sharp contrast to tetraphenyldiphosphine, which does not add to carbon–carbon double bonds efficiently, its monoxide, [Ph₂P(O)PPh₂] can engage in a radical addition to various alkenes, thus affording the corresponding 1‐phosphinyl‐2‐phosphinoalkanes regioselectively, and they can be converted into their sulfides by treatment with elemental sulfur. The phosphinylphosphination proceeds by the homolytic cleavage of the P^V(O)?P^III single bond of Ph₂P(O)PPh₂, followed by selective attack of the phosphinyl radical at the terminal position of the alkenes, and selective trapping of the resulting carbon radical by the phosphino group. Furthermore, the phosphinylphosphination product could be converted directly into its platinum complex with a hemilabile P,O chelation.     

A thorough study of the surface wax of apple fruits

The composition of the surface waxes of three apple ( Malus domestica L.) cultivars ("Florina", "Golden B" and "Ozark Gold") has been studied by means of spectroscopic and GC–MS analysis of the class-fractionated mixture of components. Odd n -alkanes, mainly C₂₇ and C₂₉ molecules, are prevalent in the saturated fraction. Small concentrations of alkenes were also found; the C_28:1 component is strongly (72%) in excess over the other 1-alkenes. Straight-chain esters (mainly of palmitic acid) of saturated primary alcohols (C₁₈–C₃₀) were also detected; whereas the acyl moiety is made up essentially of an even number of carbons, the alcohol counterpart does not exhibit this characteristic. Aldehydes are present (C₂₀–C₃₀) with the homologue patterns C₂₆–C₃₀ most strongly represented. Straight-chain free secondary alcohols characterize the waxes of "Florina" and "Ozark Gold"; the hydroxy function is located far from the extremity of the carbon framework. Outstanding is the presence of three alcohols with 29 carbon centres. These alcohols are accompanied by free straight-chain primary alcohols, mainly with even-numbered carbon chains in the range C₂₆–C₃₀. Free fatty acids are present; all of have a framework of even-numbered carbon chains mainly in the range C₁₆–C₂₀. C_18:1 (oleic acid) is well represented.     

On a new semi‐empirical electrotopological index for QSRR models

A new semi‐empirical electrotopological index, I_SET, for quantitative structure–retention relationships (QSRR) models was developed based on the refinement of the previously published semi‐empirical topological index, I_ET. We demonstrate that the values of C_i fragments that were firstly attributed from the experimental chromatographic retention and theoretical deductions have an excellent relationship with the net atomic charge of the carbon atoms. Thus, the values attributed to the vertices in the hydrogen‐suppressed graph of carbon atoms (C_i) are calculated from the correlation of the net atomic charge in each carbon atom, which is obtained from quantum chemical semi‐empirical calculations, and the C_i fragments for primary, secondary, tertiary and quaternary carbon atoms (1.0, 0.9, 0.8 and 0.7, respectively) obtained from the experimental values. This shows that I_ET encoded this quantum physical reality and that it is possible to calculate a new I_SET (the semi‐empirical electrotopological index) through the net atomic charge values obtained from a Mulliken population analysis using the semi‐empirical AM1 method and their correlation with the values attributed to the different types of carbon atoms. This demonstrates that the I_SET encodes information on the charge distribution of the solute on which dispersive and electrostatic interactions between the solute (alkanes and alkenes) and the stationary phase strongly depend. Thus, this new method can be considered as an initial step towards forthcoming QSRR/QSAR studies. Copyright © 2008 John Wiley & Sons, Ltd.     

Rates and mechanism of alkyne ozonation

The rates and products of the reactions of ozone with acetylene, methylacetylene, dimethylacetylene, and ethylacetylene have been studied in a long-path infrared cell at 21 ± 1°C. The gas phase reaction gives products formed by cleavage of the carbon–carbon triple bond. A mechanism is proposed that involves formation of a short-lived acid anhydride intermediate, which is energized by virtue of the reaction exothermicity and undergoes unimolecular decomposition. Formation of an α-dicarbonyl was observed in every case, but there is evidence that a side reaction on the walls accounted for that product. The general relationship between alkyne and alkene ozonation is discussed. The rate measurements showed that, unlike the alkenes, the rate of alkyne ozonation is not greatly affected by substitution with simple alkyl groups. The rate constant for C₂H₂ agrees with earlier work and thus provides additional support for the previously derived high A-factor for acetylene ozonation relative to alkenes.     

Cacospongione A,cacospongienone A,and cacospongienone B,new C21 difuran terpenoids from the marine sponge Cacospongiascalaris SCHMIDT of the Côte d' Azur

The sponge Cacospongia scalaris (family Thorectidae), collected at the Cap de Nice (Cǒte d'Azur), is shown to contain a series of truncated, linear C₂₁ difuran terpenoids comprising the known sponge products furospongin-1 ((+)- 1 ), furospongin-2 ( 2 ), and dihydrofurospongin-2 ((?)-(E)- 3 ), besides the new products cacospongione A ((?)- 4 ), cacospongienone A ((?)-(Z)- 6 ), and cacospongienone B ((?)-(E)- 6 ), whose absolute configurations have been assigned by chemical correlations with (+)- 1 . Possibly, one of the two cacospongienones is an artifact, as these two terpenoids interconvert on standing. This is the first finding of linear C₂₁ difuran terpenoids, which are typical of the Spongiidae, in a member of the family Thorectidae.     

Stereospecific Oxycyanation of Alkenes with Sulfonyl Cyanide

Oxycyanation of alkenes would allow the direct construction of useful β-hydroxy nitrile scaffolds. However, only limited examples of such reactions have been reported, and some problems including limited substrate scope and the lack of diastereocontrol in the case of the oxycyanation of internal alkenes have arisen. We herein report on the intermolecular oxycyanation of alkenes using p-toluenesulfonyl cyanide (TsCN) in the presence of tris(pentafluorophenyl)borane (B(C₆F₅)₃) as a catalyst, affording products that contain a sulfinyloxy group and a cyano group at the vicinal position. The reaction features a stereospecific syn-addition. The reaction also shows a broad substrate scope with good functional group tolerance. Mechanistic investigations by experimental studies and density functional theory (DFT) calculations revealed that the reaction proceeds via an unprecedented stereospecific mechanism through the electrophilic cyanation of alkenes, in which B(C₆F₅)₃ efficiently activates TsCN through the coordination of the cyano group to the boron center.     

Co-feeding with DME: An effective way to enhance gasoline production via low temperature aromatization of LPG

The aromatization of light alkenes in liquefied petroleum gas (LPG) with and without dimethyl ether (DME) addition in the feed was investigated on a modified ZSM-5 catalyst. The results showed that under the given reaction conditions the selectivity of alkenes to high-octane gasoline blending components was markedly enhanced and the formation of propane and butanes was greatly suppressed with the addition of DME. It was also found that the distribution of C₅₊ components was changed a lot with DME addition into the LPG feed. The formation of branched hydrocarbons (mainly C₆?C₈ i-paraffin) and multi-methyl substituted aromatics, which are high octane number gasoline blending components, was promoted significantly, while the content of n-paraffins and olefins in C₅₊ components was decreased obviously, indicating that in addition to the oligomerization, cracking, hydrogen-transfer and dehydrogenation-cyclization of alkenes, the methylation of the formed aromatics and olefins intermediates also plays an important role in determining the product distribution due to the high reactivity of surface methoxy groups formed by DME. And this process, in combination with the syngas-to-methanol/DME technology, provides an alternative way to the production of high-octane gasoline from coal, natural gas or renewable raw materials.     

Opportune gem‐Silylborylation of Carbonyl Compounds: A Modular and Stereocontrolled Entry to Tetrasubstituted Olefins

An easy access to highly versatile gem‐silylboronate synthons is achieved by means of a new olefination reagent, HC(Bpin)₂(SiMe₃). Subsequent silicon or boron‐based selective functionalization allows for the modular and stereocontrolled synthesis of all‐carbon tetrasubstituted alkenes. A particular attraction of this approach is the iododesilylation reaction, which becomes a pivotal tool for C?Si functionalization.     

A Large π‐Extended Carbon Nanoring Based on Nanographene Units: Bottom‐Up Synthesis,Photophysical Properties,and Selective Complexation with Fullerene C70

Herein we report the organoplatinum‐mediated bottom‐up synthesis, characterization, and properties of a novel large π‐extended carbon nanoring based on a nanographene hexa‐peri ‐hexabenzocoronene (HBC) building unit. This tubular structure can be considered as an example of the longitudinal extension of the cycloparaphenylene scaffold to form a large π‐extended carbon nanotube (CNT) segment. The cyclic tetramer of a tetramesityl HBC ([4]CHBC) was synthesized by the reaction of a 2,11‐diborylated hexa‐peri ‐hexabenzocoronene with a platinum complex, followed by reductive elimination. The structure of this tubular molecule was further confirmed by physical characterization. Theoretical calculations indicate that the strain energy of this nanoring is as high as 49.18 kcal mol⁻¹. The selective supramolecular host–guest interaction between [4]CHBC and C₇₀ was also investigated.     

A Large π‐Extended Carbon Nanoring Based on Nanographene Units: Bottom‐Up Synthesis,Photophysical Properties,and Selective Complexation with Fullerene C70

Herein we report the organoplatinum‐mediated bottom‐up synthesis, characterization, and properties of a novel large π‐extended carbon nanoring based on a nanographene hexa‐peri ‐hexabenzocoronene (HBC) building unit. This tubular structure can be considered as an example of the longitudinal extension of the cycloparaphenylene scaffold to form a large π‐extended carbon nanotube (CNT) segment. The cyclic tetramer of a tetramesityl HBC ([4]CHBC) was synthesized by the reaction of a 2,11‐diborylated hexa‐peri ‐hexabenzocoronene with a platinum complex, followed by reductive elimination. The structure of this tubular molecule was further confirmed by physical characterization. Theoretical calculations indicate that the strain energy of this nanoring is as high as 49.18 kcal mol⁻¹. The selective supramolecular host–guest interaction between [4]CHBC and C₇₀ was also investigated.     

Nickel‐Catalyzed Direct Carboxylation of Olefins with CO2: One‐Pot Synthesis of α,β‐Unsaturated Carboxylic Acid Salts

The nickel‐catalyzed direct carboxylation of alkenes with the cheap and abundantly available C₁ building block carbon dioxide (CO₂) in the presence of a base has been achieved. The one‐pot reaction allows for the direct and selective synthesis of a wide range of α,β‐unsaturated carboxylates (TON>100, TOF up to 6 h^?1, TON=turnover number, TOF=turnover frequency). Thus, it is possible, in one step, to synthesize sodium acrylate from ethylene, CO₂, and a sodium salt. Acrylates are industrially important products, the synthesis of which has hitherto required multiple steps.     

Unraveling the Nature of Sites Active toward Hydrogen Peroxide Reduction in Fe-N-C Catalysts

Fe-N-C catalysts with high O₂ reduction performance are crucial for displacing Pt in low-temperature fuel cells. However, insufficient understanding of which reaction steps are catalyzed by what sites limits their progress. The nature of sites were investigated that are active toward H₂O₂ reduction, a key intermediate during indirect O₂ reduction and a source of deactivation in fuel cells. Catalysts comprising different relative contents of FeN_xC_y moieties and Fe particles encapsulated in N-doped carbon layers (0–100 %) show that both types of sites are active, although moderately, toward H₂O₂ reduction. In contrast, N-doped carbons free of Fe and Fe particles exposed to the electrolyte are inactive. When catalyzing the ORR, FeN_xC_y moieties are more selective than Fe particles encapsulated in N-doped carbon. These novel insights offer rational approaches for more selective and therefore more durable Fe-N-C catalysts.     

Vinamidines and Vinamidinium Salts—Examples of Stabilized Push-Pull Alkenes

The name vinamidines has been proposed for 1,5-diazapentadienes: these compounds can be regarded as vinylogous amidines and at the same time as push-pull substituted (and thereby stabilized) alkenes. Vinamidine and vinamidinium structural elements may also form part of a ring system. Characteristic of this class of compounds are their reactivity toward electrophiles (at C_β) and nucleophiles (C_α) and their regenerative character, i.e. their tendency to undergo substitution instead of addition reactions. Reactions of vinamidinium salts with nucleophiles are of special preparative value: they lead e.g. to pyrazoles, oxazoles, pyrimidines, diazepines, quinolines, and quinolizines.