Fluorescence microscopy of the pressure-dependent structure of lipid bilayers suspended across conical nanopores

Glass and fused-quartz nanopore membranes containing a single conically shaped pore are promising solid supports for lipid bilayer ion-channel recordings due to the high inherent stability of lipid bilayers suspended across the nanopore orifice, as well as the favorable electrical properties of glass and fused quartz. Fluorescence microscopy is used here to investigate the structure of the suspended lipid bilayer as a function of the pressure applied across a fused-quartz nanopore membrane. When a positive pressure is applied across the bilayer, from the nanopore interior relative to the exterior bulk solution, insertion or reconstitution of operative ion channels (e.g., α-hemolysin (α-HL) and gramicidin) in the bilayer is observed; conversely, reversing the direction of the applied pressure results in loss of all channel activity, although the bilayer remains intact. The dependence of the bilayer structure on pressure was explored by imaging the fluorescence intensity from Nile red dye doped into suspended 1,2-diphytanoyl-sn-glycero-3-phosphocholine bilayers, while simultaneously recording the activity of an α-HL channel. The fluorescence images suggest that a positive pressure results in compression of the bilayer leaflets and an increase in the bilayer curvature, making it suitable for ion-channel formation and activity. At negative pressure, the fluorescence images are consistent with separation of the lipid leaflets, resulting in the observed loss of the ion-channel activity. The fluorescence data indicate that the changes in the pressure-induced bilayer structure are reversible, consistent with the ability to repeatedly switch the ion-channel activity on and off by applying positive and negative pressures, respectively.     

Dynamics and instabilities of lipid bilayer membrane shapes

Biological membranes undergo constant shape remodeling involving the formation of highly curved structures. The lipid bilayer represents the fundamental architecture of the cellular membrane with its shapes determined by the Helfrich curvature bending energy. However, the dynamics of bilayer shape transitions, especially their modulation by membrane proteins, and the resulting shape instabilities, are still not well understood. Here, we review in a unifying manner several theories that describe the fluctuations (i.e. undulations) of bilayer shapes as well as their local coupling with lipid or protein density variation. The coupling between local membrane curvature and lipid density gives rise to a ‘slipping mode’ in addition to the conventional ‘bending mode’ for damping the membrane fluctuation. This leads to a number of interesting experimental phenomena regarding bilayer shape dynamics. More importantly, curvature-inducing proteins can couple with membrane shape and eventually render the membrane unstable. A criterion for membrane shape instability is derived from a linear stability analysis. The instability criterion reemphasizes the importance of membrane tension in regulating the stability and dynamics of membrane geometry. Recent progresses in understanding the role of membrane tension in regulating dynamical cellular processes are also reviewed. Protein density is emphasized as a key factor in regulating membrane shape transitions: a threshold density of curvature coupling proteins is required for inducing membrane morphology transitions.     

Gating of single synthetic nanopores by proton-driven DNA molecular motors

Switchable ion channels that are made of membrane proteins play different roles in cellular circuits. Since gating nanopore channels made of proteins can only work in the environment of lipid membrane, they are not fully compatible to the application requirement as a component of those nanodevice systems in which lipid membranes are hard to establish. Here we report a synthetic nanopore-DNA system where single solid-state conical nanopores can be reversibly gated by switching DNA motors immobilized inside the nanopores. High- (on-state) and low- (off-state) conductance states were found within this nanopore-DNA system corresponding to the single-stranded and i-motif structures of the attached DNA motors. The highest gating efficiency indicated as current ratio of on-state versus off-state was found when the length of the attached DNA molecule matched the tip diameter of the nanopore well. This novel nanopore-DNA system, which was gated by collective folding of structured DNA molecules responding to the external stimulus, provided an artificial counterpart of switchable protein-made nanopore channels. The concept of this DNA motor-driven nanopore switch can be used to build novel, biologically inspired nanopore machines with more precisely controlled functions in the near future by replacing the DNA molecules with other functional biomolecules, such as polypeptides or protein enzymes.     

Atomistic simulation of lipid and DiI dynamics in membrane bilayers under tension

Membrane tension modulates cellular processes by initiating changes in the dynamics of its molecular constituents. To quantify the precise relationship between tension, structural properties of the membrane, and the dynamics of lipids and a lipophilic reporter dye, we performed atomistic molecular dynamics (MD) simulations of DiI-labeled dipalmitoylphosphatidylcholine (DPPC) lipid bilayers under physiological lateral tensions ranging from -2.6 mN m(-1) to 15.9 mN m(-1). Simulations showed that the bilayer thickness decreased linearly with tension consistent with volume-incompressibility, and this thinning was facilitated by a significant increase in acyl chain interdigitation at the bilayer midplane and spreading of the acyl chains. Tension caused a significant drop in the bilayer's peak electrostatic potential, which correlated with the strong reordering of water and lipid dipoles. For the low tension regime, the DPPC lateral diffusion coefficient increased with increasing tension in accordance with free-area theory. For larger tensions, free area theory broke down due to tension-induced changes in molecular shape and friction. Simulated DiI rotational and lateral diffusion coefficients were lower than those of DPPC but increased with tension in a manner similar to DPPC. Direct correlation of membrane order and viscosity near the DiI chromophore, which was just under the DPPC headgroup, indicated that measured DiI fluorescence lifetime, which is reported to decrease with decreasing lipid order, is likely to be a good reporter of tension-induced decreases in lipid headgroup viscosity. Together, these results offer new molecular-level insights into membrane tension-related mechanotransduction and into the utility of DiI in characterizing tension-induced changes in lipid packing.     

Experimental evidence to support a theory of lipid membrane fusion

Membrane fusion between two lipid membranes with different curvatures was measured by using a fluorescence fusion assay for lipid vesicle systems and was also obtained by measuring lipid monolayer surface tension upon the fusion of vesicles to monolayer membranes. For such membrane systems, it was found that when lysolipid was incorporated only in the membrane with a greater curvature, membrane fusion was more suppressed than those for the case where the same amount (molar ratio of lysolipid to non-lysolipids) of lysolipid was incorporated only in the membrane with a lower curvature. When lysolipid was incorporated only in a flat membrane (e.g., monolayer) and the fusion of small vesicles (SUV) to the monolayer was measured, suppression of membrane fusion by lysolipid was minimal. It is known that lysolipid lowers the surface energy of curved membranes, which stabilizes energetically such membrane surfaces, and thus suppresses membrane fusion. Our results support our theory of lipid membrane fusion where the membrane fusion occurs through the most curved membrane region at the contact area of two interacting membranes.     

Calcium modulates the mechanical properties of anionic phospholipid membranes

Using micropipette aspiration and fluorescence techniques, we have studied the material properties of charged lipid vesicles in calcium solutions. Vesicles were composed of phosphatidylglycerol (PG)/phosphatidylcholine (PC) or phosphatidic acid (PA)/PC mixtures. For the case of PG/PC membranes, we measure no effect of anionic lipid fraction on elasticity but a monotonic decrease up to 20% for tension required to induce membrane failure. Both of these observations are rationalized by a model we have developed to describe membrane electrostatic interactions in a two-component salt solution and the resulting changes in membrane properties. Critical tensions measured for PA/PC membranes, on the other hand, did not depend on anionic lipid fraction and were uniformly approximately 35% lower than PG/PC vesicles. This is likely due to a lateral phase separation in the membrane. By combining mechanical properties with fluorescence observations we propose that the PA-rich phase separates into small unconnected domains.     

Modulation of the spontaneous curvature and bending rigidity of lipid membranes by interfacially adsorbed amphipathic peptides

Amphipathic alpha-helical peptides are often ascribed an ability to induce curvature stress in lipid membranes. This may lead directly to a bending deformation of the host membrane, or it may promote the formation of defects that involve highly curved lipid layers present in membrane pores, fusion intermediates, and solubilized peptide-micelle complexes. The driving force is the same in all cases: peptides induce a spontaneous curvature in the host lipid layer, the sign of which depends sensitively on the peptide's structural properties. We provide a quantitative account for this observation on the basis of a molecular-level method. To this end, we consider a lipid membrane with peptides interfacially adsorbed onto one leaflet at high peptide-to-lipid ratio. The peptides are modeled generically as rigid cylinders that interact with the host membrane through a perturbation of the conformational properties of the lipid chains. Through the use of a molecular-level chain packing theory, we calculate the elastic properties, that is, the spontaneous curvature and bending stiffness, of the peptide-decorated lipid membrane as a function of the peptide's insertion depth. We find a positive spontaneous curvature (preferred bending of the membrane away from the peptide) for small penetration depths of the peptide. At a penetration depth roughly equal to half-insertion into the hydrocarbon core, the spontaneous curvature changes sign, implying negative spontaneous curvature (preferred bending of the membrane toward the peptide) for large penetration depths. Despite thinning of the membrane upon peptide insertion, we find an increase in the bending stiffness. We discuss these findings in terms of how the peptide induces elastic stress.     

A duplex–triplex nucleic acid nanomachine that probes pH changes inside living cells during apoptosis

A duplex–triplex switchable DNA nanomachine was fabricated and has been applied for the demonstration of intracellular acidification and apoptosis of Ramos cells, with graphene oxide (GO) not only as transporter but also as fluorescence quencher. The machine constructed with triplex-forming oligonucleotide exhibited duplex–triplex transition at different pH conditions. By virtue of the remarkable difference in affinity of GO with single-stranded DNA and triplex DNA, and the super fluorescence quenching efficiency of GO, the nanomachine functions as a pH sensor based on fluorescence resonance energy transfer. Moreover, taking advantage of the excellent transporter property of GO, the duplex–triplex/GO nanomachine was used to sense pH changes inside Ramos cells during apoptosis. Fluorescence images showed different results between living and apoptotic cells, illustrating the potential of DNA scaffolds responsive to more complex pH triggers in living systems.

Floret-shaped solid domains on giant fluid lipid vesicles induced by pH

Lateral lipid phase separation of titratable PS or PA lipids and their assembly in domains induced by changes in pH are significant in liposome-based drug delivery: environmentally responsive lipid heterogeneities can be tuned to alter collective membrane properties such as permeability (altering drug release) and surface topography (altering drug carrier reactivity) impacting, therefore, the therapeutic outcomes. At the micrometer scale fluorescence microscopy on giant unilamellar fluid vesicles (GUVs) shows that lowering pH (from 7.0 to 5.0) promotes condensation of titratable PS or PA lipids into beautiful floret-shaped domains in which lipids are tightly packed via hydrogen-bonding and van der Waals interactions. The order of lipid packing within domains increases radially toward the domain center. Lowering pH enhances the lipid packing order, and at pH 5.0 domains appear to be entirely in the solid (gel) phase. Domains phenomenologically comprise a circular "core" cap beyond which interfacial instabilities emerge resembling leaf-like stripes. At pH 5.0 stripes are of almost vanishing Gaussian curvature independent of GUVs' preparation path and in agreement with a general condensation mechanism. Increasing incompressibility of domains is strongly correlated with a larger number of thinner stripes per domain and increasing relative rigidity of domains with smaller core cap areas. Line tension drives domain ripening; however, the final domain shape is a result of enhanced incompressibility and rigidity maximized by domain coupling across the bilayer. Introduction of a transmembrane osmotic gradient (hyperosmotic on the outer lipid leaflet) allows the domain condensation process to reach its maximum extent which, however, is limited by the minimal expansivity of the continuous fluid membrane.     

Resistive-pulse DNA detection with a conical nanopore sensor

In this paper, we describe resistive-pulse sensing of two large DNAs, a single-stranded phage DNA (7250 bases) and a double-stranded plasmid DNA (6600 base pairs), using a conically shaped nanopore in a track-etched polycarbonate membrane as the sensing element. The conically shaped nanopore had a small-diameter (tip) opening of 40 nm and a large-diameter (base) opening of 1.5 microm. The DNAs were detected using the resistive-pulse, sometimes called stochastic sensing, method. This entails applying a transmembrane potential difference and monitoring the resulting ion current flowing through the nanopore. The phage DNA was driven electrophoretically through the nanopore (from tip to base), and these translocation events were observed as transient blocks in the ion current. We found that the frequency of these current-block events scales linearly with the concentration of the DNA and with the magnitude of the applied transmembrane potential. Increasing the applied transmembrane potential also led to a decrease in the duration of the current-block events. We also analyzed current-block events for the double-stranded plasmid DNA. However, because this DNA is too large to enter the tip opening of the nanopore, it could not translocate the pore. As a result, much shorter duration current-block events were observed, which we postulate are associated with bumping of the double-stranded DNA against the tip opening.     

A Telomerase-Assisted Strategy for Regeneration of DNA Nanomachines in Living Cells

DNA nanomachines have been engineered into diverse personalized devices for diagnostic imaging of biomarkers; however, the regeneration of DNA nanomachines in living cells remains challenging. Here, we report an ingenious DNA nanomachine that can implement telomerase (TE)-activated regeneration in living cells. Upon apurinic/apyrimidinic endonuclease 1 (APE1)-responsive initiation of the nanomachine, the walker of the nanomachine moves along tracks regenerated by TE, generating multiply amplified signals through which APE1 can be imaged in situ. Additionally, augmentation of the signal due to the regeneration of the nanomachines could reveal differential expression of TE in different cell lines. To the best of our knowledge, this is the first proof-of-concept demonstration of the use of biomarkers to assist in the regeneration of nanomachines in living cells. This study offers a new paradigm for the development of more applicable and efficient DNA nanomachines.     

Rational Engineering of a Dynamic,Entropy-Driven DNA Nanomachine for Intracellular MicroRNA Imaging

We rationally engineered an elegant entropy-driven DNA nanomachine with three-dimensional track and applied it for intracellular miRNAs imaging. The proposed nanomachine is activated by target miRNA binding to drive a walking leg tethered to gold nanoparticle with a high density of DNA substrates. The autonomous and progressive walk on the DNA track via the entropy-driven catalytic reaction of intramolecular toehold-mediated strand migration leads to continuous disassembly of DNA substrates, accompanied by the recovery of fluorescence signal due to the specific release of a dye-labeled substrate from DNA track. Our nanomachine outperforms the conventional intermolecular reaction-based gold nanoparticle design in the context of an improved sensitivity and kinetics, attributed to the enhanced local effective concentrations of working DNA components from the proximity-induced intramolecular reaction. Moreover, the nanomachine was applied for miRNA imaging inside living cells.     

Rational Engineering of a Dynamic,Entropy‐Driven DNA Nanomachine for Intracellular MicroRNA Imaging

We rationally engineered an elegant entropy‐driven DNA nanomachine with three‐dimensional track and applied it for intracellular miRNAs imaging. The proposed nanomachine is activated by target miRNA binding to drive a walking leg tethered to gold nanoparticle with a high density of DNA substrates. The autonomous and progressive walk on the DNA track via the entropy‐driven catalytic reaction of intramolecular toehold‐mediated strand migration leads to continuous disassembly of DNA substrates, accompanied by the recovery of fluorescence signal due to the specific release of a dye‐labeled substrate from DNA track. Our nanomachine outperforms the conventional intermolecular reaction‐based gold nanoparticle design in the context of an improved sensitivity and kinetics, attributed to the enhanced local effective concentrations of working DNA components from the proximity‐induced intramolecular reaction. Moreover, the nanomachine was applied for miRNA imaging inside living cells.     

Formation of nanopore-spanning lipid bilayers through liposome fusion

Self-assembly of nanopore-spanning lipid bilayers (npsLBs) paves the way toward chip-based integrated membrane protein biosensing. We present a novel approach to analyze the formation of npsLB at individual nanopores using quantitative analysis of high-resolution microscopy images. From this analysis we derive necessary conditions for the formation of npsLBs on nanopore arrays by liposome fusion and discuss the limitations of the process as a function of nanopore geometry, lipid membrane properties, and surface interaction. Most importantly, applying liposomes with diameters larger than the nanopore is demonstrated to be a necessary but not sufficient condition for npsLB formation. A theoretical model is used to discuss and explain this experimental finding.     

Use of liposomes to evaluate the role of membrane interactions on antioxidant activity

In this study the possibility of using liposomes as membrane mimetic systems was evaluated to estimate the antioxidant properties of oxicams and establish a relationship between the interactions of the drugs with the membrane and their consequent antioxidant activity. Different experiments were performed covering the study of the protective effect of oxicams in lipid peroxidation induced by the peroxyl radical (ROO) derived from 2,2′-azobis(2-amidinopropane) dihydrochloride (AAPH) and using two fluorescence probes with distinct lipophilic properties. Lipid peroxidation using the hydrophilic probe fluorescein was evaluated in lipid and aqueous media. Lipid systems labelled with the fluorescent probe diphenylhexatriene propionic acid (DPH-PA) were used to assess the effects of the drugs on membrane peroxidation simultaneously by fluorescence intensity decay and changes in membrane fluidity by steady-state anisotropy measurements. The use of different probes and liposomes as membrane mimetic systems allowed to conclude that membrane lipoperoxidation is related not only to the scavenging characteristics of the antioxidants but also to their ability to interact with the lipid bilayers.     

A single-molecule nanopore device detects DNA polymerase activity with single-nucleotide resolution

The ability to monitor DNA polymerase activity with single-nucleotide resolution has been the cornerstone of a number of advanced single-molecule DNA sequencing concepts. Toward this goal, we report the first observation of the base-by-base DNA polymerase activity with single-base resolution at the single-molecule level. We describe the design and characterization of a supramolecular nanopore device capable of detecting up to nine consecutive DNA polymerase-catalyzed single-nucleotide primer extensions with high sensitivity and spatial resolution (相似文献   

Counterion-mediated pattern formation in membranes containing anionic lipids

Most lipid components of cell membranes are either neutral, like cholesterol, or zwitterionic, like phosphatidylcholine and sphingomyelin. Very few lipids, such as sphingosine, are cationic at physiological pH. These generally interact only transiently with the lipid bilayer, and their synthetic analogs are often designed to destabilize the membrane for drug or DNA delivery. However, anionic lipids are common in both eukaryotic and prokaryotic cell membranes. The net charge per anionic phospholipid ranges from − 1 for the most abundant anionic lipids such as phosphatidylserine, to near − 7 for phosphatidylinositol 3,4,5 trisphosphate, although the effective charge depends on many environmental factors. Anionic phospholipids and other negatively charged lipids such as lipopolysaccharides are not randomly distributed in the lipid bilayer, but are highly restricted to specific leaflets of the bilayer and to regions near transmembrane proteins or other organized structures within the plane of the membrane. This review highlights some recent evidence that counterions, in the form of monovalent or divalent metal ions, polyamines, or cationic protein domains, have a large influence on the lateral distribution of anionic lipids within the membrane, and that lateral demixing of anionic lipids has effects on membrane curvature and protein function that are important for biological control.     

Pore-spanning lipid membrane under indentation by a probe tip: a molecular dynamics simulation study

We study the indentation of a free-standing lipid membrane suspended over a nanopore on a hydrophobic substrate by means of molecular dynamics simulations. We find that in the course of indentation the membrane bends at the point of contact and the fringes of the membrane glide downward intermittently along the pore edges and stop gliding when the fringes reach the edge bottoms. The bending continues afterward, and the large strain eventually induces a phase transition in the membrane, transformed from a bilayered structure to an interdigitated structure. The membrane is finally ruptured when the indentation goes deep enough. Several local physical quantities in the pore regions are calculated, which include the tilt angle of lipid molecules, the nematic order, the included angle, and the distance between neighboring lipids. The variations of these quantities reveal many detailed, not-yet-specified local structural transitions of lipid molecules under indentation. The force-indentation curve is also studied and discussed. The results make a connection between the microscopic structure and the macroscopic properties and provide deep insight into the understanding of the stability of a lipid membrane spanning over nanopore.     

Lipid bilayer membrane technologies: A review on single-molecule studies of DNA sequencing by using membrane nanopores

Nanopores based on α-hemolysin and MspA represent attractive sensing platforms due to easy production and operation with relatively low background noise. Such characteristics make them highly favorable for sequencing nucleic acids. Artificial lipid bilayer membranes, also referred to as black lipid membranes, in conjunction with membrane nanopores, can be applied to both the detection and highly efficient sequencing of DNA on a single-molecule level. However, the inherently weak physical properties of the membrane have impeded progress in these areas. Current issues impeding the ultimate recognition of the artificial lipid bilayer as a viable platform for detection and sequencing of DNA include membrane stability, lifespan, and automation. This review (with 105 references) highlights attempts to improve the attributes of the artificial lipid bilayer membrane starting with an overview on the present state and limitations. The first main section covers lipid bilayer membranes (BLM) in general. The following section reviews the various kinds of lipid bilayer membrane platforms with subsections on polymer membranes, solid-supported membranes, hydrogel-encapsulated membranes, shippable and storable membrane platforms, and droplet interface bilayers. A further section covers engineered biological nanopore sensor applications using BLMs with subsections offering a comparative view of different DNA sequencing methods, a detailed look at DNA Sequencing by synthesis using alpha-hemolysin nanopores, sequencing by synthesis using the MspA nanopore and quadromer map, and on limitations of sequencing based on synthesis technology. We present an outlook at the end that discusses current research trends on single-molecule sequencing to highlight the significance of this technology and its potential in the medical and environmental fields.

Open image in new window

Graphical abstract Sequencing by Synthesis, a novel method of sequencing DNA, uses the αHL biological nanopore and the artificial lipid bilayer membrane platform. Polymer tags attached to nucleotides bind to the polymerase-primer–template complex and are characterized by the nanopore upon release.

     

Lateral Organization of Host Heterogeneous Raft‐like Membranes Altered by the Myristoyl Modification of Tyrosine Kinase c‐Src

Membrane‐bound c‐Src non‐receptor tyrosine kinase, unlike other acyl‐modified lipid‐anchored proteins, anchors to the membrane by a myristoyl chain along with a polybasic residue stretch, which is shorter in chain length than its host membrane. The packing defect arising from this mismatched chain length of the host and the lipid anchor significantly affects the lateral organization of heterogeneous membranes. We reveal the mixing of phase domains and formation of novel nanoscale‐clusters upon membrane binding of the Myr‐Src (2–9) peptide. Fluorescence cross correlation spectroscopy was used to explore the nature of these clusters. We show that Myr‐Src (2–9) is able to oligomerize, and the peptide clusters are embedded in a lipid platform generated by lipid sorting. Further, using confocal fluorescence microscopy and FRET assays we show that localized charge enrichment and membrane curvature are able to shift the partition coefficient towards the more ordered lipid phase.