Effect of Calcination Temperature on Surface Oxygen Vacancies and Catalytic Performance Towards CO Oxidation of Co3O4 Nanoparticles Supported on SiO2

Co₃O₄/SiO₂ catalysts for CO oxidation were prepared by conventional incipient wetness impregnation followed by calcination at various temperatures. Their structures were char-acterized with X-ray diffraction (XRD), laser Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), temperature-programmed reduction (TPR) and X-ray absorption fine structure (XAFS) spectroscopy. Both XRD and Raman spectroscopy only detect the ex-istence of Co₃O₄ crystallites in all catalysts. However, XPS results indicate that excess Co²⁺ ions are present on the surface of Co₃O₄ in Co₃O₄(200)/SiO₂ as compared with bulk Co₃O₄. Meanwhile, TPR results suggest the presence of surface oxygen vacancies on Co₃O₄ in Co₃O₄(200)/SiO₂, and XAFS results demonstrate that Co₃O₄ in Co₃O₄(200)/SiO₂ con-tains excess Co²⁺. Increasing calcination temperature results in oxidation of excess Co²⁺ and the decrease of the concentration of surface oxygen vacancies, consequently the for-mation of stoichiometric Co₃O₄ on supported catalysts. Among all Co₃O₄/SiO₂ catalysts,Co₃O₄(200)/SiO₂ exhibits the best catalytic performance towards CO oxidation, demon-strating that excess Co²⁺ and surface oxygen vacancies can enhance the catalytic activity of Co₃O₄ towards CO oxidation. These results nicely demonstrate the effect of calcination temperature on the structure and catalytic performance towards CO oxidation of silica-supported Co₃O₄ catalysts and highlight the important role of surface oxygen vacancies on Co₃O₄.     

Structure Sensitivity of CO Oxidation on Co3O4: A DFT Study

The reaction mechanism of CO oxidation on the Co₃O₄ (110) and Co₃O₄ (111) surfaces is investigated by means of spin‐polarized density functional theory (DFT) within the GGA+U framework. Adsorption situation and complete reaction cycles for CO oxidation are clarified. The results indicate that 1) the U value can affect the calculated energetic result significantly, not only the absolute adsorption energy but also the trend in adsorption energy; 2) CO can directly react with surface lattice oxygen atoms (O_2f/O_3f) to form CO₂ via the Mars–van Krevelen reaction mechanism on both (110)‐B and (111)‐B; 3) pre‐adsorbed molecular O₂ can enhance CO oxidation through the channel in which it directly reacts with molecular CO to form CO₂ [O₂(a)+CO(g)→CO₂(g)+O(a)] on (110)‐A/(111)‐A; 4) CO oxidation is a structure‐sensitive reaction, and the activation energy of CO oxidation follows the order of Co₃O₄ (111)‐A(0.78 eV)>Co₃O₄ (111)‐B (0.68 eV)>Co₃O₄ (110)‐A (0.51 eV)>Co₃O₄ (110)‐B (0.41 eV), that is, the (110) surface shows higher reactivity for CO oxidation than the (111) surface; 5) in addition to the O_2f, it was also found that Co³⁺ is more active than Co²⁺, so both O_2f and Co³⁺ control the catalytic activity of CO oxidation on Co₃O₄, as opposed to a previous DFT study which concluded that either Co³⁺ or O_2f is the active site.     

Comparison between various Keggin and Wells–Dawson sandwich‐type polyoxometalates in catalytic oxidation of cyclooctene and cyclohexene with hydrogen peroxide

The catalytic performance of tetra‐n‐butylammonium salts of Keggin and Wells–Dawson sandwich‐type polyoxotungstates, [M₄(PW₉O₃₄)₂]^m? and [M₄(P₂W₁₅O₅₆)₂]^n? (M = Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Zn²⁺), in the oxidation of cyclooctene and cyclohexene with 30% hydrogen peroxide under various conditions was investigated. In comparison, Wells–Dawson sandwich‐type polyoxometalates were found to be less active than Keggin ones. In both of them, those containing Zn and Fe gave higher conversions for different oxidation conditions. These catalysts showed very good reusability in the oxidation reaction. Copyright © 2014 John Wiley & Sons, Ltd.     

In situ growth of Co3O4 nano-dodecahedeons on In2O3 hexagonal prisms for toluene catalytic combustion

In this paper, in situ growth of Co₃O₄ nano-dodecahedra on In₂O₃ hexagonal prisms were synthesized via pyrolysis of ZIF-67/MIL-68. Interestingly, the amount of Co₃O₄ dodecahedra on In₂O₃ hexagonal prisms was regularly regulated and controlled. In detail, four Co₃O₄/In₂O₃ catalysts with various Co/In molar ratio were prepared, including Co₄In₁ (Co/In molar ratio was 4:1), Co₂In₁ (Co/In molar ratio was 2:1), Co₁In₁ (Co/In molar ratio was 1:1), Co_0.5In₁ (Co/In molar ratio was 0.5:1). The catalytic performance of Co₃O₄/In₂O₃ catalysts was systematically investigated for toluene combustion. It could be noted that the Co₂In₁ sample exhibited the superior catalytic performance, and the temperatures for 90% toluene conversion (T₉₀) was 182 °C. Furthermore, the toluene conversion of Co₂In₁ sample had no significant decrease at 178 °C for 15 h, indicating that it presented superior stability for toluene oxidation reaction. Through various characterizations, it was verified that the Co/In molar ratio of Co₃O₄/In₂O₃ catalyst could obviously alter the surface atomic ratio of Co³⁺/(Co³⁺ + Co²⁺), BET surface area, the number of surface adsorbed oxygen, the interaction between In₂O₃ and Co₃O₄ of CoInO_x catalysts and so on. The lots of surface adsorbed oxygen, strong interaction between In₂O₃ and Co₃O₄ would promote the catalytic oxidation of toluene. Especially, we discovered that the catalytic activity of Co₃O₄/In₂O₃ was obviously improved with the increase of Co³⁺/(Co³⁺ + Co²⁺) surface atomic ratio.     

Alcohol Oxidations Using Reduced Polyoxovanadates

A full account of our recently communicated room temperature alcohol oxidation using reduced polyoxovanadates (r‐POV s) is presented. Extensive optimizations revealed optimal conditions employing 0.02 equiv. of r‐POV catalyst Cs₅(V₁₄As₈O₄₂Cl), 5 equiv. tert‐butyl hydrogen peroxide (^t BuOOH ) as the terminal co‐oxidant, in an acetone solvent for the quantitative oxidation of aryl‐substituted secondary alcohols to their ketone products. The substrate scope tolerates most aryl substituted secondary alcohols in good to quantitative yields while alkyl secondary and primary activated alcohols were sluggish in comparison under similar conditions. Catalyst recyclability was successful on a 1.0 mmol scale of starting alcohol 1‐phenylethanol. The oxidation was also successfully promoted by the V^IV /V^V mixed valent polyoxovanadate (POV ) Cs₁₁Na₃Cl₅(V₁₅O₃₆Cl). Finally, a third POV , Cs_2.64(V₅O₉)(AsO₄)₂, was investigated for catalytic activity using our established reaction protocol, but proved ineffective as compared to the other two r‐POV catalysts. This study expands the field of POM ‐mediated alcohol oxidations to include underexplored r‐POV catalysts. While our catalysts do not supplant the best catalysts known for the transformation, their study may inform the development of other novel oxidative transformations mediated by r‐POV s.     

Kinetics and Mechanism of Oxidation of S2O32− by a Co‐Bound μ‐Amido‐μ‐Superoxo Complex

In acetate buffer media (pH 4.5–5.4) thiosulfate ion (S₂O₃^2?) reduces the bridged superoxo complex, [(NH₃)₄Co^III(μ‐NH₂,μ‐O₂)Co^III(NH₃)₄]⁴⁺ ( 1 ) to its corresponding μ‐peroxo product, [(NH₃)₄Co^III(μ‐NH₂,μ‐O₂)Co^III(NH₃)₄]³⁺ ( 2 ) and along a parallel reaction path, simultaneously S₂O₃^2? reacts with 1 to produce the substituted μ‐thiosulfato‐μ‐superoxo complex, [(NH₃)₄Co^III(μ‐S₂O₃,μ‐O₂)Co^III(NH₃)₄]³⁺ ( 3 ). The formation of μ‐thiosulfato‐μ‐superoxo complex ( 3 ) appears as a precipitate which on being subjected to FTIR shows absorption peaks that support the presence of Co(III)‐bound S‐coordinated S₂O₃^2? group. In reaction media, 3 readily dissolves to further react with S₂O₃^2? to produce μ‐thiosulfato‐μ‐peroxo product, [(NH₃)₄Co^III(μ‐S₂O₃,μ‐O₂)Co^III(NH₃)₄]²⁺ ( 4 ). The observed rate (k₀) increases with an increase in [T_Thio] ([T_Thio] is the analytical concentration of S₂O₃^2?) and temperature (T), but it decreases with an increase in [H⁺] and the ionic strength (I). Analysis of the log A_t versus time data (A is the absorbance of 1 at time t) reveals that overall the reaction follows a biphasic consecutive reaction path with rate constants k₁ and k₂ and the change of absorbance is equal to {a₁ exp(–k₁t) + a₂ exp(–k₂t)}, where k₁ > k₂.     

Postsynthetic Metal and Ligand Exchange in MFU‐4l: A Screening Approach toward Functional Metal–Organic Frameworks Comprising Single‐Site Active Centers

The isomorphous partial substitution of Zn²⁺ ions in the secondary building unit (SBU) of MFU‐4l leads to frameworks with the general formula [M_xZn_(5–x)Cl₄(BTDD)₃], in which x≈2, M=Mn^II, Fe^II, Co^II, Ni^II, or Cu^II, and BTDD=bis(1,2,3‐triazolato‐[4,5‐b],[4′,5′‐i])dibenzo‐[1,4]‐dioxin. Subsequent exchange of chloride ligands by nitrite, nitrate, triflate, azide, isocyanate, formate, acetate, or fluoride leads to a variety of MFU‐4l derivatives, which have been characterized by using XRPD, EDX, IR, UV/Vis‐NIR, TGA, and gas sorption measurements. Several MFU‐4l derivatives show high catalytic activity in a liquid‐phase oxidation of ethylbenzene to acetophenone with air under mild conditions, among which Co‐ and Cu derivatives with chloride side‐ligands are the most active catalysts. Upon thermal treatment, several side‐ligands can be transformed selectively into reactive intermediates without destroying the framework. Thus, at 300 °C, Co^II‐azide units in the SBU of Co‐MFU‐4l are converted into Co^II‐isocyanate under continuous CO gas flow, involving the formation of a nitrene intermediate. The reaction of Cu^II‐fluoride units with H₂ at 240 °C leads to Cu^I and proceeds through the heterolytic cleavage of the H₂ molecule.     

Developing Insoluble Polyoxometalate Clusters to Bridge Homogeneous and Heterogeneous Water Oxidation Photocatalysis

Cluster catalysts are attractive for their atomically precise structures, defined compositions, tunable coordination environments, uniform active sites, and their ability to transfer multiple electrons, but they suffer from poor stability and recyclability. Here, we report a general approach to the direct insolubilization of a water soluble polyoxometalate (POM) [{(B-α-PW₉O₃₄)Co₃(OH)(H₂O)₂(O₃PC(O)-(C₃H₆NH₃)PO₃)}₂Co]¹⁴⁻ ( Co₇ ) and formation of a series of POM-based solid catalysts with the counter-cations Ag⁺, Cs⁺, Sr²⁺, Ba²⁺, Pb²⁺, Y³⁺, and Ce³⁺. They exhibit improved catalytic activities for visible-light-driven water oxidation following the trend CsCo₇ > SrCo₇ > AgCo₇ > Ce^IIICo₇ > BaCo₇ > YCo₇ > PbCo₇ . While CsCo₇ exhibits mainly homogeneous catalysis, the others are predominantly heterogeneous catalysts. An optimal oxygen yield of 41.3 % and a high apparent quantum yield (AQY) of 30.6 % for SrCo₇ is obtained, which is comparable to that of the parent homogeneous POM. Band gap structures, UV/Vis spectra, and real-time laser flash photolysis experiments collectively suggest that easier electron transfer from the solid POM catalyst to the photosensitizer promotes photocatalytic water oxidation performance. These solid POM catalysts exhibit good stability, which is directly confirmed by a combination of Fourier-transform infrared spectroscopy, electron microscopy, X-ray diffraction patterns, Raman spectroscopy, X-ray photoelectron spectroscopy, five cycles of tests, and poisoning experiments.     

Visible‐Light‐Induced Water Oxidation Mediated by a Mononuclear‐Cobalt(II)‐Substituted Silicotungstate

A mononuclear‐cobalt(II)‐substituted silicotungstate, K₁₀[Co(H₂O)₂(γ‐SiW₁₀O₃₅)₂] ? 23 H₂O (POM‐ 1 ), has been evaluated as a light‐driven water‐oxidation catalyst. With in situ photogenerated [Ru(bpy)₃]³⁺ (bpy=2,2′‐bipyridine) as the oxidant, quite high catalytic turnover number (TON; 313), turnover frequency (TOF; 3.2 s^?1), and quantum yield (Φ_QY; 27 %) for oxygen evolution at pH 9.0 were acquired. Comparison experiments with its structural analogues, namely [Ni(H₂O)₂(γ‐SiW₁₀O₃₅)₂]^10? (POM‐ 2 ) and [Mn(H₂O)₂(γ‐SiW₁₀O₃₅)₂]^10? (POM‐ 3 ), gave the conclusion that the cobalt center in POM‐ 1 is the active site. The hydrolytic stability of the title polyoxometalate (POM) was confirmed by extensive experiments, including UV/Vis spectroscopy, linear sweep voltammetry (LSV), and cathodic adsorption stripping analysis (CASA). As the [Ru(bpy)₃]²⁺/visible light/sodium persulfate system was introduced, a POM–photosensitizer complex formed within minutes before visible‐light irradiation. It was demonstrated that this complex functioned as the active species, which remained intact after the oxygen‐evolution reaction. Multiple experimental parameters were investigated and the catalytic activity was also compared with the well‐studied POM‐based water‐oxidation catalysts (i.e., [Co₄(H₂O)₂(α‐PW₉O₃₄)₂]^10? (Co₄‐POM) and [Co^IIICo^II(H₂O)W₁₁O₃₉]^7? (Co₂‐POM)) under optimum conditions.     

Oxo-bridged Tri- and Tetra-nuclear Cobalt Complexes Supported with Amide-Based Nitrogen Donor Ligands

This work presents two mixed-valent μ₃-oxo-bridged trinuclear [(Co²⁺)₂Co³⁺] complexes 1 and 2 and a μ₄-oxo-bridged tetranuclear [Co²⁺₄] complex 3 . Crystal structures of 1 and 2 showed the presence of triangular complexes having two Co²⁺ and one Co³⁺ centers bridged by a μ³-oxo group. In contrast, complex 3 exhibited a tetrahedrally arranged μ₄-oxo-bridged [Co²⁺₄] core. A significant feature is the stabilization of unusual μ-oxo-bridged complexes exclusively supported with all nitrogen donor ligands. The X-ray photoelectron spectroscopy confirmed the multiple oxidation states of cobalt ions in these complexes. Such oxo-bridged cobalt complexes were investigated for their catalytic activity towards H₂O₂-mediated oxidation of assorted benzyl alcohols.     

Optimal Geometrical Configuration of Cobalt Cations in Spinel Oxides to Promote Oxygen Evolution Reaction

MgCo₂O₄, CoCr₂O₄, and Co₂TiO₄ were selected, where only Co³⁺ in the center of octahedron (Oh), Co²⁺ in the center of tetrahedron (Td), and Co²⁺ in the center of Oh, can be active sites for the oxygen evolution reaction (OER). Co³⁺(Oh) sites are the best geometrical configuration for OER. Co²⁺(Oh) sites exhibit better activity than Co²⁺(Td). Calculations demonstrate the conversion of O* into OOH* is the rate‐determining step for Co³⁺(Oh) and Co²⁺(Td). For Co²⁺(Oh), it is thermodynamically favorable for the formation of OOH* but difficult for the desorption of O₂. Co³⁺(Oh) needs to increase the lowest Gibbs free energy over Co²⁺(Oh) and Co²⁺(Td), which contributes to the best activity. The coexistence of Co³⁺(Oh) and Co²⁺(Td) in Co₃O₄ can promote the formation of OOH* and decrease the free‐energy barrier. This work screens out the optimal geometrical configuration of cobalt cations for OER and gives a valuable principle to design efficient electrocatalysts.     

Synthesis and Structures of Two Dinuclear Transition Metal Complexes and Their Catalytic Applications in Hydrogenation of Ketones

The complexes [Ni₂(L)₂]₂ · H₂O ( 1 ) and [Cu₂(L)₂(H₂O)] · 2CH₃OH ( 2 ) were prepared by reaction of the chiral Schiff base ligand N‐[(1R,2S)‐2‐hydroxy‐1,2‐diphenyl]‐acetylacetonimine (H₂L) with Ni^II and Cu^II ions, respectively, aiming to develop economically and environmentally‐friendly catalysts for the hydrogenation of ketones. They have a dinuclear skeleton with axial vacant sites. The catalytic effects of the two complexes for hydrogenation of ketones were tested using dihydrogen gas as hydrogen source. They present some catalytic effects in hydrogenation of acetophenone, which has a dependence on the temperature and base used in these reactions. However, no apparent catalytic effects were found for the two complexes in hydrogenation of 4‐nitroacetophenone and 4‐methylacetophenone. Although the catalytic conversion in these hydrogenation reactions is low, they do represent a kind of cheap and environmentally‐friendly hydrogenation catalyst.     

Iron Borohydride Pincer Complexes for the Efficient Hydrogenation of Ketones under Mild,Base‐Free Conditions: Synthesis and Mechanistic Insight

The new, structurally characterized hydrido carbonyl tetrahydridoborate iron pincer complex [(iPr‐PNP)Fe(H)(CO)(η¹‐BH₄)] ( 1 ) catalyzes the base‐free hydrogenation of ketones to their corresponding alcohols employing only 4.1 atm hydrogen pressure. Turnover numbers up to 1980 at complete conversion of ketone were reached with this system. Treatment of 1 with aniline (as a BH₃ scavenger) resulted in a mixture of trans‐[(iPr‐PNP)Fe(H)₂(CO)] ( 4 a ) and cis‐[(iPr‐PNP)Fe(H)₂(CO)] ( 4 b ). The dihydrido complexes 4 a and 4 b do not react with acetophenone or benzaldehyde, indicating that these complexes are not intermediates in the catalytic reduction of ketones. NMR studies indicate that the tetrahydridoborate ligand in 1 dissociates prior to ketone reduction. DFT calculations show that the mechanism of the iron‐catalyzed hydrogenation of ketones involves alcohol‐assisted aromatization of the dearomatized complex [(iPr‐PNP*)Fe(H)(CO)] ( 7 ) to initially give the Fe⁰ complex [(iPr‐PNP)Fe(CO)] ( 21 ) and subsequently [(iPr‐PNP)Fe(CO)(EtOH)] ( 38 ). Concerted coordination of acetophenone and dual hydrogen‐atom transfer from the PNP arm and the coordinated ethanol to, respectively, the carbonyl carbon and oxygen atoms, leads to the dearomatized complex [(iPr‐PNP*)Fe(CO)(EtO)(MeCH(OH)Ph)] ( 32 ). The catalyst is regenerated by release of 1‐phenylethanol, followed by dihydrogen coordination and proton transfer to the coordinated ethoxide ligand.     

Critical phenomena in ethylbenzene oxidation in acetic acid solution at high cobalt(<Emphasis Type="SmallCaps">II</Emphasis>) concentrations

Critical phenomena in ethylbenzene oxidation in an acetic acid solution at high cobalt(III) concentrations (from 0.01 to 0.2 mol L⁻¹) were studied at 60–90 °C by the gasometric (O₂ absorption), spectrophotometric (Co^III accumulation), and chemiluminescence (relative concentration of radical RO₂ ^·) methods. These phenomena are as follows: (1) increase in the oxidation rate above the theoretical limiting rate of radical autooxidation (k ₃ ²[RH]²/2k ₆); (2) achievement of a maximum and a sharp decrease in the oxidation rate and concentration of radical RO₂ ^· with the further increase in the Co^II concentration (existence of critical concentrations). The oxidation rate increases due to the reaction RO₂ ^· + Co^II + H⁺ → → ROOH + Co^III, while the inhibition effect is caused by the decay of RO₂ ^· radical involving two cobalt(II) atoms: RO₂ ^· + 2 Co^II → R′CO + Co^III + Co^II (k(70 °C) ≈ 300 L² mol⁻² s⁻¹). The detailed scheme (through the formation of the complex RO₂ ^·Co^II) describing the conjugation of these reactions was proposed. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1823–1827, August, 2005.     

Improved chemical water oxidation with Zn in the tetrahedral site of spinel-type ZnCo2O4 nanostructure

Spinel oxides with the composition of A^IIB^III₂O₄ (A and B are metal ions) represent an important class of anode material for water splitting to replace the currently used noble-metal catalysts. Although spinel electrocatalysts have widely been investigated for electrochemical water oxidation, the role of octahedral and tetrahedral sites influencing catalytic performance has been a topic of discussion for a long time and still under debate. Lately, this issue has been addressed by substituting redox-inert cation to the tetrahedral sites of cobalt spinels and comparing the electrochemical activity between them. However, rapid surface structural transformation of the catalysts under operating electrochemical conditions makes it difficult to infer the exact contribution of tetrahedral and octahedral sites for water oxidation. Herein, for the first time, we utilize the oxidant-driven water oxidation approach to reveal the responsible active sites using two spinel-type nanostructures, Zn^IICo₂^IIIO₄ and Co^IICo₂^IIIO₄ (Co₃O₄), synthesized by using a single-source precursor approach. Strikingly, a superior O₂ production rate (0.98 mmol_O2 mol_Co^?1 s^?1) following first-order reaction kinetics was achieved for ZnCo₂O₄ in the presence of Ce^IV as sacrificial electron acceptor compared to Co₃O₄ spinel (0.29 mmol_O2 mol_Co^?1 s^?1). The structural and morphological stability of the ZnCo₂O₄ and Co₃O₄ post water oxidation catalysis confirms that the catalytic activity is strictly controlled by the geometry and electronic structure of the active site of the spinel structure. The higher performance of ZnCo₂O₄ over Co₃O₄ further indicates that the presence of Co^II is not essential for catalytic water oxidation. The presence of redox inert Zn^II at the tetrahedral site of ZnCo₂O₄ can facilitate the stabilization of a high-valent Co^IV intermediate via oxidation of Co^III (situated at the octahedral site), and this intermediate can be regarded as the active species for water oxidation catalyst along with structural defects caused by surface Zn leaching.     

Entrapment of a Pseudo‐Tetrahedral CoII Center by Thioether Sulfur Bound {Co2(μ‐L)} Fragments: Synthesis,Field‐Induced Single‐Ion Magnetism and Catechol Oxidase Mimicking Activity

Simultaneous incorporation of both Co^II and Co^III ions within a new thioether S‐bearing phenol‐based ligand system, H₃L (2,6‐bis‐[{2‐(2‐hydroxyethylthio)ethylimino}methyl]‐4‐methylphenol) formed [Co₅] aggregates [Co^IICo^III₄L₂(μ‐OH)₂(μ_1,3‐O₂CCH₃)₂](ClO₄)₄?H₂O ( 1 ) and [Co^IICo^III₄L₂(μ‐OH)₂(μ_1,3‐O₂CC₂H₅)₂](ClO₄)₄?H₂O ( 2 ). The magnetic studies revealed axial zero‐field splitting (ZFS) parameter, D/hc=?23.6 and ?24.3 cm^?1, and E/D=0.03 and 0.00, respectively for 1 and 2 . Dynamic magnetic data confirmed the complexes as SIMs with U_eff/k_B=30 K ( 1 ) and 33 K ( 2 ), and τ₀=9.1×10^?8 s ( 1 ), and 4.3×10^?8 s ( 2 ). The larger atomic radius of S compared to N gave rise to less variation in the distortion of tetrahedral geometry around central Co^II centers, thus affecting the D and U_eff/k_B values. Theoretical studies also support the experimental findings and reveal the origin of the anisotropy parameters. In solutions, both 1 and 2 which produce {Co^III₂(μ‐L)} units, display solvent‐dependent catechol oxidation behavior toward 3,5‐di‐tert‐butylcatechol in air. The presence of an adjacent Co^III ion tends to assist the electron transfer from the substrate to the metal ion center, enhancing the catalytic oxidation rate.     

Plasma‐Engraved Co3O4 Nanosheets with Oxygen Vacancies and High Surface Area for the Oxygen Evolution Reaction

Co₃O₄, which is of mixed valences Co²⁺ and Co³⁺, has been extensively investigated as an efficient electrocatalyst for the oxygen evolution reaction (OER). The proper control of Co²⁺/Co³⁺ ratio in Co₃O₄ could lead to modifications on its electronic and thus catalytic properties. Herein, we designed an efficient Co₃O₄‐based OER electrocatalyst by a plasma‐engraving strategy, which not only produced higher surface area, but also generated oxygen vacancies on Co₃O₄ surface with more Co²⁺ formed. The increased surface area ensures the Co₃O₄ has more sites for OER, and generated oxygen vacancies on Co₃O₄ surface improve the electronic conductivity and create more active defects for OER. Compared to pristine Co₃O₄, the engraved Co₃O₄ exhibits a much higher current density and a lower onset potential. The specific activity of the plasma‐engraved Co₃O₄ nanosheets (0.055 mA cm^?2_BET at 1.6 V) is 10 times higher than that of pristine Co₃O₄, which is contributed by the surface oxygen vacancies.     

The Roles of Composition and Mesostructure of Cobalt-Based Spinel Catalysts in Oxygen Evolution Reactions

By using the crystalline precursor decomposition approach and direct co-precipitation the composition and mesostructure of cobalt-based spinels can be controlled. A systematic substitution of cobalt with redox-active iron and redox-inactive magnesium and aluminum in a cobalt spinel with anisotropic particle morphology with a preferred 111 surface termination is presented, resulting in a substitution series including Co₃O₄, MgCo₂O₄, Co₂FeO₄, Co₂AlO₄ and CoFe₂O₄. The role of redox pairs in the spinels is investigated in chemical water oxidation by using ceric ammonium nitrate (CAN test), electrochemical oxygen evolution reaction (OER) and H₂O₂ decomposition. Studying the effect of dominant surface termination, isotropic Co₃O₄ and CoFe₂O₄ catalysts with more or less spherical particles are compared to their anisotropic analogues. For CAN-test and OER, Co³⁺ plays the major role for high activity. In H₂O₂ decomposition, Co²⁺ reveals itself to be of major importance. Redox active cations in the structure enhance the catalytic activity in all reactions. A benefit of a predominant 111 surface termination depends on the cobalt oxidation state in the as-prepared catalysts and the investigated reaction.     

Dual-template synthesis of defect-rich mesoporous Co3O4 for low temperature CO oxidation

CO oxidation is a benchmark in heterogeneous catalysis for evaluation of redox catalysts due to its practical relevance in many applications and the fundamental problems associated with its very high activity at low temperatures. Among which, Co₃O₄ is one of the most active non-precious metal catalysts. Exposed crystal planes and cobalt sites are considered to be important for its high catalytic activity. Herein, we demonstrate an enhanced CO oxidation activity by a defect-rich mesoporous Co₃O₄ that prepared by a designed dual-template method. Two different kinds of silicas are used as hard-templates at the same time, resulting in a defect-rich mesoporous Co₃O₄ with a surface area as high as 169 m²/g. This catalyst exhibited a very high catalytic activity for low temperature CO oxidation with a light-off temperature at −73 ^oC under the space velocity of 80,000 mL h^-1 g_cat^-1. Further studies reveal that the high surface area promotes the lattice oxygen mobility, surface rich of Co²⁺ species and active oxygen species are crucial for the high catalytic activity. Moreover, the dual-template approach paves a way towards the design and construction of high-surface-area mesoporous metal oxides for various applications.     

NixCo3-xO4表面修饰对CdSe/TiO2纳米管阵列光电化学氧化水活性的影响

利用氨挥发诱导法在CdSe/TiO2纳米管阵列表面负载一层NixCo3-xO4。采用SEM、XRD、XPS、UV-Vis对样品进行表征,通过线性扫描伏安法测定光阳极的释氧电势来评价其光电水氧化活性。结果表明:表面NixCo3-xO4是尖晶石结构;相对于CdSe/TiO2纳米管阵列光阳极,NixCo3-xO4/CdSe/TiO2光阳极能将光电氧化水的过电势降低430 mV。Ni离子的引入使得NixCo3-xO4表面富含三价阳离子(Ni3+,Co3+),从而促进CdSe/TiO2光阳极光电水氧化的进行。