Controlled Alternating Copolymerization of (Meth)acrylates and Vinyl Ethers by Using Organoheteroatom‐Mediated Living Radical Polymerization

Alternating copolymers comprised of (meth)acrylates and vinyl ethers with controlled molecular weights and polydispersities were synthesized for the first time by living radical polymerization using organotellurium, stibine, and bismuthine chain transfer agents. Combining living alternating copolymerization and living radical or living cationic polymerization afforded hitherto unavailable block copolymers with controlled macromolecular structures.

     

Controlled random and alternating copolymerization of (meth)acrylates,acrylonitrile, and (meth)acrylamides with vinyl ethers by organotellurium‐, organostibine‐, and organobismuthine‐mediated living radical polymerization reactions

Random and alternating copolymerizations of acrylates, methacrylates, acrylonitorile, and acrylamides with vinyl ethers under organotellurium‐, organostibine‐, and organobismuthine‐mediated living radical polymerization (TERP, SBRP, and BIRP, respectively) have been studied. Structurally well‐controlled random and alternating copolymers with controlled molecular weights and polydispersities were synthesized. The highly alternating copolymerization occurred in a combination of acrylates and vinyl ethers and acrylonitorile and vinyl ethers by using excess amount of vinyl ethers over acrylates and acrylonitorile. On the contrary, alternating copolymerization did not occur in a combination of acrylamides and vinyl ethers even excess amount of vinyl ethers were used. The reactivity of polymer‐end radicals to a vinyl ether was estimated by the theoretical calculations, and it was suggested that the energy level of singly occupied molecular orbital (SOMO) of polymer‐end radical species determined the reactivity. By combining living random and alternating copolymerization with living radical or living cationic polymerization, new block copolymers, such as (PBA‐alt‐PIBVE)‐block‐(PtBA‐co‐PIBVE), PBA‐block‐(PBA‐alt‐PIBVE), and (PTFEA‐alt‐PIBVE)‐block‐PIBVE, with controlled macromolecular structures were successfully synthesized. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Cationic RAFT Polymerization Using ppm Concentrations of Organic Acid

A metal‐free, cationic, reversible addition–fragmentation chain‐transfer (RAFT) polymerization was proposed and realized. A series of thiocarbonylthio compounds were used in the presence of a small amount of triflic acid for isobutyl vinyl ether to give polymers with controlled molecular weight of up to 1×10⁵ and narrow molecular‐weight distributions (M_w/M_n<1.1). This “living” or controlled cationic polymerization is applicable to various electron‐rich monomers including vinyl ethers, p‐methoxystyrene, and even p‐hydroxystyrene that possesses an unprotected phenol group. A transformation from cationic to radical RAFT polymerization enables the synthesis of block copolymers between cationically and radically polymerizable monomers, such as vinyl ether and vinyl acetate or methyl acrylate.     

Expanding vinyl ether monomer repertoire for ring-expansion cationic polymerization: Various cyclic polymers with tailored pendant groups

Herein, we clarified the ring-expansion cationic polymerization with a cyclic hemiacetal ester (HAE)-based initiator was versatile in terms of applicable vinyl ether monomers. Although there was a risk that higher reactive vinyl ethers may incur β-H elimination of the HAE-based cyclic dormant species to irreversibly give linear chains, the polymerizations were controlled to give corresponding cyclic polymers from various alkyl vinyl ethers of different reactivities. Functional vinyl ether monomers were also available, and for instance a vinyl ether monomer carrying an initiator moiety for metal-catalyzed living radical polymerization in the pendant allowed construction of ring-linear graft copolymers through the grafting-from approach. Furthermore, ring-based gel was prepared via the addition of divinyl ether at the end of the ring-expansion polymerization, where multi HAE bonds cyclic polymers or fused rings were crosslinked with each other. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3082–3089     

Thermosensitive polyalcohols: Synthesis via living cationic polymerization of vinyl ethers with a silyloxy group

Thermosensitive homopolymers and copolymers with hydroxy groups were synthesized via the living cationic polymerization of Si‐containing vinyl ethers. The cationic homopolymerization and copolymerization of five vinyl ethers with silyloxy groups, each with a different spacer length, were examined with a cationogen/Et_1.5AlCl_1.5 initiating system in the presence of an added base. When an appropriate base was added, the living cationic polymerization of Si‐containing monomers became feasible, giving polymers with narrow molecular weight distributions and various block copolymers. Subsequent desilylation gave well‐defined polyalcohols, in both water‐soluble and water‐insoluble forms. One of these polyalcohols, poly(4‐hydroxybutyl vinyl ether), underwent lower‐critical‐solution‐temperature‐type thermally induced phase separation in water at a critical temperature (T_PS) of 42 °C. This phase separation was quite sensitive and reversible on heating and cooling. The phase separation also occurred sensitively with random copolymers of thermosensitive and hydrophilic or hydrophobic units, the T_PS values of which in water could be controlled by the monomer feed ratio. The thermal responsiveness of this polyalcohol unit made it possible to prepare novel thermosensitive block and random copolymers consisting solely of alcohol units. One example prepared in this study was a 20 wt % aqueous solution of a diblock copolymer consisting of thermosensitive poly(4‐hydroxybutyl vinyl ether) and water‐soluble poly(2‐hydroxyethyl vinyl ether) segments, which transformed into a physical gel above 42 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3300–3312, 2003     

Thiol-Ene Cationic and Radical Reactions: Cyclization,Step-Growth,and Concurrent Polymerizations for Thioacetal and Thioether Units

Thiol-ene cationic and radical reactions were conducted for 1:1 addition between a thiol and vinyl ether, and also for cyclization and step-growth polymerization between a dithiol and divinyl ether. p-Toluenesulfonic acid (PTSA) induced a cationic thiol-ene reaction to generate a thioacetal in high yield, whereas 2,2′-azobisisobutyronitrile resulted in a radical thiol-ene reaction to give a thioether, also in high yield. The cationic and radical addition reactions between a dithiol and divinyl ether with oxyethylene units yielded amorphous poly(thioacetal)s and crystalline poly(thioether)s, respectively. Under high-dilution conditions, the cationic and radical reactions resulted in 16- and 18-membered cyclic thioacetal and thioether products, respectively. Furthermore, concurrent cationic and radical step-growth polymerizations were realized using PTSA under UV irradiation to produce polymers having both thioacetal and thioether linkages in the main chain.     

Modulating Polymer Dispersity with Light: Cationic Polymerization of Vinyl Ethers Using Photochromic Initiators

Deterministic methods for tuning polymer dispersity are rare, especially for nonradical polymerizations. Reported here is the first example of photomodulating dispersity in controlled cationic polymerizations of vinyl ethers using carboxy‐functionalized dithienylethene initiators. Reversible photoisomerization of these initiators induces changes in their acidities by up to an order of magnitude. Using the more acidic, ring‐closed isomers as initiators results in polymers with lower dispersities. The degree of light‐induced pK_a change in the initiators correlates with the degree of dispersity change in polymers derived from the isomeric initiators. The polymerizations are controlled, and dynamic photoswitching of dispersity during the polymerization reaction was demonstrated. This work provides a framework for photomodulating dispersity in other controlled polymerizations and developing one‐pot block copolymerization reactions in which the dispersities of component blocks can be controlled using light.     

Thiol‐Ene Cationic and Radical Reactions: Cyclization,Step‐Growth,and Concurrent Polymerizations for Thioacetal and Thioether Units

Thiol‐ene cationic and radical reactions were conducted for 1:1 addition between a thiol and vinyl ether, and also for cyclization and step‐growth polymerization between a dithiol and divinyl ether. p‐Toluenesulfonic acid (PTSA) induced a cationic thiol‐ene reaction to generate a thioacetal in high yield, whereas 2,2′‐azobisisobutyronitrile resulted in a radical thiol‐ene reaction to give a thioether, also in high yield. The cationic and radical addition reactions between a dithiol and divinyl ether with oxyethylene units yielded amorphous poly(thioacetal)s and crystalline poly(thioether)s, respectively. Under high‐dilution conditions, the cationic and radical reactions resulted in 16‐ and 18‐membered cyclic thioacetal and thioether products, respectively. Furthermore, concurrent cationic and radical step‐growth polymerizations were realized using PTSA under UV irradiation to produce polymers having both thioacetal and thioether linkages in the main chain.     

Living cationic polymerization of vinyl ethers in the presence of added bases: Recent advances

The living cationic polymerization of vinyl ethers was carried out with organoaluminum compounds in the presence of various types of esters and ethers (cyclic and acyclic), to find out the suitable added bases available for the living polymerization. The effects of the basicity and steric hindrance of added bases were investigated in detail. On the basis of these results, a fast living polymerization system was realized. To synthesize water-soluble polymers such as thermally-induced phase separating polymers and polyalcohols with well-defined polymer structure, the living polymerization of various vinyl ethers was examined. The aqueous solution of living poly(vinyl ethers) having oxyethylene units exhibited a quite sensitive (ΔT_ps=0.3–0.5°C) and reversible phase separation on heating and cooling. The effects of polymer structures (pendant substituent, polymer sequence, molecular weight, and MWD) on the phase separation behavior were investigated. PVA and block copolymers containing PVA units with a narrow MWD were also prepared via living cationic polymerization of vinyl ethers and a deprotection reaction.     

Synthesis of end‐functionalized polymers and copolymers of cyclopentadiene with vinyl ethers by cationic polymerization

A series of cyclopentadiene (CPD)‐based polymers and copolymers were synthesized by a controlled cationic polymerization of CPD. End‐functionalized poly(CPD) was synthesized with the HCl adducts [initiator = CH₃CH(OCH₂CH₂X)Cl; X = Cl ( 2a ), acetate ( 2b ), or methacrylate] of vinyl ethers carrying pendant functional substituents X in conjunction with SnCl₄ (Lewis acid as a catalyst) and n‐Bu₄NCl (as an additive) in dichloromethane at −78 °C. The system led to the controlled cationic polymerizations of CPD to give controlled α‐end‐functionalized poly(CPD)s with almost quantitative attachment of the functional groups (F_n ∼ 1). With the 2a or 2b /SnCl₄/n‐Bu₄NCl initiating systems, diblock copolymers of 2‐chloroethyl vinyl ether (CEVE) and 2‐acetoxyethyl vinyl ether with CPD were also synthesized by the sequential polymerization of CPD and these vinyl ethers. An ABA‐type triblock copolymer of CPD (A) and CEVE (B) was also prepared with a bifunctional initiator. The copolymerization of CPD and CEVE with 2a /SnCl₄/n‐Bu₄NCl afforded random copolymers with controlled molecular weights and narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight = 1.3–1.4). © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 398–407, 2001     

Synthesis of functional polyolefins using cationic bisphosphine monoxide-palladium complexes

The copolymerization of ethylene with polar vinyl monomers, such as vinyl acetate, acrylonitrile, vinyl ethers, and allyl monomers, was accomplished using cationic palladium complexes ligated by a bisphosphine monoxide (BPMO). The copolymers formed by these catalysts have highly linear microstructures and a random distribution of polar functional groups throughout the polymer chain. Our data demonstrate that cationic palladium complexes can exhibit good activity for polymerizations of polar monomers, in contrast to cationic α-diimine palladium complexes (Brookhart-type) that are not applicable to industrially relevant polar monomers beyond acrylates. Additionally, the studies reported here point out that phosphine-sulfonate ligated palladium complexes are no longer the singular family of catalysts that can promote the reaction of ethylene with many polar vinyl monomers to form linear functional polyolefins.     

Interconvertible Living Radical and Cationic Polymerization through Reversible Activation of Dormant Species with Dual Activity

The polymerization of vinyl monomers generally requires the selection of an appropriate single intermediate, whereas in copolymerization, the selection of the comonomer is limited by the intermediate. Herein, we propose interconvertible dual active species that can connect comonomers through different mechanisms to produce specific comonomer sequences in a single polymer chain. More specifically, two different stimuli, that is, a radical initiator and a Lewis acid, are used to activate the common dormant C? SC(S)Z group into radical and cationic species, thereby inducing interconvertible radical and cationic copolymerization of acrylate and vinyl ether to produce a copolymer chain that consists of radically and cationically polymerized segments. The dual reversible activation provides control over molecular weights and multiblock copolymers with tunable segment lengths.     

Tandem Ring‐Opening Metathesis – Vinyl Insertion Polymerization: Fundamentals and Application to Functional Polyolefins

The accomplishments in the copolymerization of ethylene with cyclic olefins such as norborn‐2‐ene or cis‐cyclooctene via tandem ring‐opening metathesis polymerization (ROMP) – vinyl insertion polymerization (VIP) are outlined. This approach provides polyolefins with high molecular weight (600,000 < M_n < 4,500,000 g mol⁻¹) and substantial amounts of double bonds along the polymer main chain. Olefinic moieties in ROMP‐derived polymers can be converted into hydroxyl, amino, silyl, ester, or carboxylate groups by different means including controlled radical polymerization‐based grafting. The underlying concept for the switch in polymerization mechanism, the resulting pre‐catalyst requirements, limitations and challenges and the chemistry developed for functionalizing unsaturated polymers are outlined in detail.

     

2-[(Diallyl)hydroxymethyl]pyrrolidine in radical (co)polymerization reactions

The feasibility of the free-radical (co)polymerization of 2-[(diallyl)hydroxymethyl]pyrrolidine is studied. It is found that, under radical-initiation conditions, this monomer is not involved in homopolymerization and copolymerization with vinyl monomers; however, it exhibits high activity during copolymerization with sulfur dioxide. Copolymerization proceeds to yield alternating copolymers of an equimolar composition. The main polymer chain contains both linear fragments formed via opening of one double bond of 2-[(diallyl)hydroxymethyl]pyrrolidine and cyclolinear structures resulting from the participation of two double bonds in the reaction. It is demonstrated that the copolymers obtained are optically active.     

Application of cationic polymerization to grafting and coating of silica particles

The cationic polymerization of electron rich monomers such as vinyl ethers, vinyl furane, and cyclopentadiene on silica surfaces can be initiated by aryl methyl halides. The reactions yield always soluble polymers (by heterogeneous catalysis) and novel polymer/silica hybrid materials. The link between polymer and solid is caused by covalent Si-O-C bonds, by network formation of the polymers during the chain growth, or by a combination of both of them. The analysis of the polymer structures on the surface by ¹H MAS NMR spectroscopy in suspension and by solid state ¹³C CP MAS NMR spectroscopy is described. Proof of Si-O-C bonds via DRIFT spectroscopy and ¹³C CP MAS NMR spectroscopy is given. The most effective method of irreversibly linking the polymer to the silica surface is the network formation. Polyvinyl ethers are bound strongly to the surface, as can be shown by FTIR measurements, but the linkage is not stable due to the Si-O-C bonds' susceptibility to hydrolysis. Poly-cyclopentadienes (PCPD) are linked to the surface by Si-O-C bonds, which show an extraordinary high resistance to acids and bases. Si-O-C bond formation of poly-2-vinyl furane could not yet be detected by ¹³C CP MAS NMR spectroscopy and DRIFT spectroscopy. In this case the high degree of coating derives from the bifunctionality of 2-vinyl furane: it may undergo Friedel-Crafts-alkylation at the 5-position of the furane ring as well as chain polymerization via the vinyl group at the 2-position.     

苯甲酸乙烯酯与受电子的可逆加成－断链链转移共聚合

采用二硫代苯甲酸苄酯和偶氮二异丁腈组成的引发体系,以可逆加成－断链链 转移聚合方法合成了苯甲酸乙烯酯与马来酸酐及N－取代马来酰亚胺的交替共聚物 。结果表明,所行聚合物具有预期分子量,分子量分布在1.1～1.3之间。在较低转 化率下所得的聚合物均为交替结构,而与摩尔设料比无关。     

Amphiphilic block and statistical copolymers with pendant glucose residues: Controlled synthesis by living cationic polymerization and the effect of copolymer architecture on their properties

Amphiphilic block and statistical copolymers of vinyl ethers (VEs) with pendant glucose residues were synthesized by the living cationic polymerization of isobutyl VE (IBVE) and a VE carrying 1,2:5,6‐di‐O‐isopropylidene‐D ‐glucose (IpGlcVE), followed by deprotection. The block copolymer was prepared by a two‐stage sequential block copolymerization, whereas the statistical copolymer was obtained by the copolymerization of a mixture of the two monomers. The monomer reactivity ratios estimated with the statistical copolymerization were r₁ (IBVE) = 1.65 and r₂ (IpGlcVE) = 1.15. The obtained statistical copolymers were nearly uniform with the comonomer composition along the main chain. Both the block and statistical copolymers had narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ∼ 1.1). Gel permeation chromatography, static light scattering, and spin–lattice relaxation time measurements in a selective solvent revealed that the block copolymer formed multimolecular micelles, possibly with a hydrophobic poly(IBVE) core and a glucose‐carrying poly(VE) shell, whereas the statistical copolymer with nearly the same molecular weight and segment composition was molecularly dispersed in solution. The surface properties of the solvent‐cast films of the block and statistical copolymer were also investigated with the contact‐angle measurement. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 459–467, 2001     

Copolymerization of N-Vinylcarbazole and Vinyl Acetate via Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization

Summary: The reversible addition–fragmentation chain transfer (RAFT) random copolymerization of N-vinylcarbazole (NVC) and vinyl acetate (VAc) was carried out using s-benzyl-o-ethyl dithiocarbonate (BED) as the chain transfer agent and 2,2′-azoisobutyronitrile (AIBN) as the initiator in 1,4-dioxane solution at 70 °C. The polymerization showed the characteristics of ‘living’ free radical polymerization behaviors: first order kinetics, linear relationships between molecular weight and conversion, and narrow polydispersity of the polymers. The reactivity ratios of NVC and VAc were calculated via the Kelen–Tudos (KT) and non-linear error in variable (EVM) methods and showed as r₁ = 1.938 ± 0.191, r₂ = 0.116 ± 0.106. The thermal behavior of the copolymers with different content of NVC and VAc was investigated by DSC and TGA. The results showed that the introduction of a VAc segment into copolymer significantly reduced the T_g of the NVC homopolymers. FT-IR spectra, fluorescence spectra, and cyclic voltammetric behavior of these copolymers were also measured and compared with those of NVC homopolymers. The copolymers showed similar oxidative behavior to the NVC homopolymer. However, there was only one reductive potential peak shown for the copolymers at about 0.058 V.     

Polyisobutylene based designed polymers

The field of cationic polymerization has moved center stage with the recent discovery of living polymerization that lead to the design of polymers with controlled molecular architecture. This report will provide a brief introduction of living cationic polymerization of isobutylene (IB) by tertiary ethers, and new cationic initiating systems based on peroxides and hydroperoxides. This paper will also briefly review some our recent work on the design of block copolymers via multi-mode polymerization (cationic–radical transformation) including the synthesis of star-blocks. The application of polyisobutylenes (PIBs) in the design of “beaded molecular strings,” a new class of molecular assembly will be discussed as well.     

Structural Defects in Poly(vinyl chloride) and the Mechanism of Vinyl Chloride Polymerization: Comments on Recent Studies

Investigations in the title areas within the past ten years are summarized and critiqued. The polymerizations studied were performed by conventional free-radical methods. A new mechanism, not yet confirmed, is suggested to explain a reported enhancement in the chloromethyl branch concentration of poly(vinyl chloride) (PVC) prepared at high conversions of monomer. This mechanism involves an intramolecular 1,5 hydrogen shift in a 1,3,5,6-tetrachlorohexyl radical. Evidence showing that most of the internal double bonds in PVC are not formed via intermolecular H abstraction from internal monomer units is tentatively rationalized, in part, by hydrogen transfer via at least one cyclic transition state containing more than eight members. The absence of free chlorine atoms from polymerizations of vinyl chloride (VC) is reaffirmed, and the copolymerization of VC with the chloroallylic chain ends of PVC is argued to be insignificant. New information in the literature does not invalidate the currently accepted mechanism of vinyl chloride polymerization.