Synthesis of Novel Donor–π–Acceptor Chromophores with Dipicolinate as Acceptor

Three novel donor–π–acceptor (D–π–A) chromophores, with dipicolinate as acceptor, have been synthesized. All the compounds were characterized by ¹H NMR, infrared (IR) spectroscopy, mass spectrometry (MS), and elemental analysis.     

Synthesis and Photovoltaic Properties of Donor–Acceptor Oligothiophene Derivatives Possessing Mesogenic Properties

For the purpose of developing novel photovoltaic materials and organic photovoltaic devices with good performance characteristics, 5-cyano-2,2′:5′,2″-terthiophene (3T-CN) and 5-cyano-2,2′:5′,2″:5″,2″′-tetrathiophene (4T-CN) were synthesized. The 3T-CN and 4T-CN were donor–acceptor oligothiophene derivatives possessing mesogenic properties. The photovoltaic properties of 3T-CN and 4T-CN were studied. The rigid and flexible photovoltaic devices were fabricated using 3T-CN, 4T-CN, and 3,4,9,10-perylenetertracarboxylic dianhydride (PTCDA). The results showed that the -CN group played an important role in increasing short circuit current density (I _sc) and power conversion efficiency (PCE). Both rigid device glass-ITO/4T-CN/PTCDA/Al and flexible device PET-ITO (indium tin oxides coated with polyethylene terephthalate)/4T-CN/PTCDA/Al had greater I _sc and PCE compared with rigid device glass-ITO/4T/PTCDA/Al. It was possible that the -CN group, with strong electron-withdrawing character, and mesogenic properties of 4T-CN enhanced the efficiency by promoting forward interfacial electron transfer.      

1,1′-Binaphthyl Consisting of Two Donor–π–Acceptor Subunits: A General Skeleton for Temperature-Dependent Dual Fluorescence

Temperature-dependent dual fluorescence with the anti-Kasha's rule is of great interest, but is a very challenging property to achieve in small organic molecules. The highly sensitive temperature-dependent dual fluorescence of 2,2′-bis(dimethylamino)-6,6′-bis(dimesitylboryl)-1,1′-binaphthyl ( BNMe₂-BNaph ), which essentially consists of two donor–π–acceptor (D-π-A) subunits, inspired the exploration of the importance of its structural features and the general utility of this molecular design. The reference compound MBNMe₂-BNaph , which lacks one electron-accepting Mes₂B, is found to show less sensitive temperature-dependent dual fluorescence, suggesting that the structure of BNMe₂-Bnaph , consisting of two symmetrical D-π-A subunits, is very important for achieving highly sensitive temperature-dependent dual fluorescence. In addition, it is found that another two 1,1′-binaphthyls, CHONMe₂-BNaph and CNNMe₂-BNaph , which also consist of two D-π-A subunits with Mes₂B groups replaced by CHO and CN, respectively, also show temperature-dependent dual fluorescence, with the fluorescence changing in a similar manner to BNMe₂-BNaph , indicating the general utility of the current molecular design for temperature-dependent dual fluorescence. Furthermore, the temperature-dependent dual fluorescence behaviors, such as the relative intensities of the two emission bands, the separation of the two emissions bands, and the sensitivity of the fluorescence intensity ratio to temperature, are greatly influence by the electron acceptors.     

Supramolecular Nanowires from an Acceptor–Donor–Acceptor Conjugated Chromophore

Oligothiophene derivatives have been extensively studied as p-type semiconducting materials in organic electronics applications. This work reports the synthesis, self-assembly and photophysical properties of acceptor–donor–acceptor (A–D–A)-type oligothiophene derivatives by end-group engineering of quaterthiophene (QT) with naphthalene monoimide (NMI) chromophores that are further connected to a trialkoxy benzamide wedge. Conjugation to the NMI units reduces the HOMO–LUMO gap significantly, and consequently the absorption spectrum exhibits a bathochromic shift of about 50 nm compared with QT. Furthermore, extended H-bonding interactions among the amido groups of the peripheral wedges produce entangled fibrillar nanostructures and gelation in hydrocarbon solvents such as methylcyclohexane, wherein the A–D–A chromophore exhibits typical H-aggregation. On the contrary, the fact that the same chromophore, lacking only the amido units, does not produce gels or H-aggregates indicates strong impact of H-bonding on the self-assembly. Computational studies revealed the electronic properties of the chromophore and predicted the geometry of a dimer in the H-aggregate that reasonably matches with the experimental results. Bulk electrical conductivity measurements determined an excellent conductivity of 2.3×10⁻² S cm⁻¹ for the H-aggregated system (OT-1), which is two orders of magnitude higher than that of the same chromophore lacking the amido groups (OT-2).     

Triarylborane-Based Helical Donor–Acceptor Compounds: Synthesis,Photophysical, and Electronic Properties

The synthesis and characterization of 10-(dimesitylboryl)-N,N-di-p-tolylbenzo[c]phenanthren-4-amine (3-B(Mes)₂-[4]helix-9-N(p-Tol)₂ 1 ) and 13-(dimesitylboryl)-N,N-di-p-tolyldibenzo[c,g]phenanthren-8-amine (3-B(Mes)₂-[5]helix-12-N(p-Tol)₂ 2 ) are reported herein. Their electrochemical and photophysical properties have been studied experimentally and theoretically. The donor and acceptor-substituted helicene derivatives exhibit moderate fluorescence quantum yields in THF (Φ_f=0.48 and 0.61 for 1 and 2 , respectively), which are higher than unsubstituted ones (Φ_f=0.18 for [4]helicene; Φ_f<0.05 for [n]helicenes (n≥5)). In the solid state, the Φ_f values are higher (Φ_f=1.00 and 0.55 for 1 and 2 , respectively) than those in solution, most likely due to the restrictions of molecular motions. The S₁←S₀ transitions of 1 and 2 are predominately HOMO→LUMO transitions. Upon excitation with UV light, the interplanar angle between the two terminal aryl rings of the [5]helix core of 2 decreases (S₁ state compared with S₀ state), which is similar to placing a spring under an external force.     

Excited Donor–Acceptor Complexes in the Polymerization of Vinyl Monomers

Butyl methacrylate was found to affect the composition of radical intermediates formed in the photoreduction of benzophenone with triethylamine. In the presence of the monomer, the yield of free radicals decreased and the yield of complexes of the geminate radical pair increased. This was explained by the formation of excited ternary complexes resulted from the interaction of the excited triplet state of benzophenone with the ground-state complex of butyl methacrylate and triethylamine. The substituent effect in benzophenone on the stability of the radical complex was studied. The reaction rate constant for the decay of the radical complex was correlated with the Hammett ⁰ _c constant that determines the mesomeric effect of the substituent.     

Synthesis,Photophysical and Electronic Properties of New Red-to-NIR Emitting Donor–Acceptor Pyrene Derivatives

We synthesized new pyrene derivatives with strong bis(para-methoxyphenyl)amine donors at the 2,7-positions and n-azaacene acceptors at the K-region of pyrene. The compounds possess a strong intramolecular charge transfer, leading to unusual properties such as emission in the red to NIR region (700 nm), which has not been reported before for monomeric pyrenes. Detailed photophysical studies reveal very long intrinsic lifetimes of >100 ns for the new compounds, which is typical for 2,7-substituted pyrenes but not for K-region substituted pyrenes. The incorporation of strong donors and acceptors leads to very low reduction and oxidation potentials, and spectroelectrochemical studies show that the compounds are on the borderline between localized Robin-Day class-II and delocalized Robin-Day class-III species.     

Improving the Electrical and Optical Properties of C40 Fullerene Using the Donor–Acceptor Groups

Journal of Cluster Science - In the present study, the C40 fullerene was selected as the source of the π electrons and the electron-donor–acceptor groups was used to improve the optical...     

Formation of Highly Efficient,Long-Lived Charge Separated States in Star-Shaped Ferrocene-Diketopyrrolopyrrole-Triphenylamine Donor–Acceptor–Donor Conjugates

The significance of multiple number of donor–acceptor entities on a central electron donor in a star-shaped molecular system in improving light energy harvesting ability is reported. For this, donor–acceptor–donor type conjugates comprised up to three entities ferrocenyl (Fc)-diketopyrrolopyrrole (DPP) onto a central triphenylamine (TPA), ( 4 – 6 ) by the Pd-catalyzed Sonogashira cross-coupling reactions have been newly synthesized and characterized. Donor–acceptor conjugates possessing diketopyrrolopyrrole (1 to 3 entities) onto the central triphenylamine, ( 1 – 3 ) served as reference dyads while monomeric DPP and Fc-DPP served as control compounds. Both DPP and Fc-DPP carrying conjugates exhibited red-shifted absorption compared to their respective control compounds revealing existence of ground state interactions. Furthermore, DPP fluorescence in 4 – 6 was found to be quantitatively quenched while for 1 – 3 , this property varied between 73–65 % suggesting occurrence moderate amounts of excited state events. The electrochemical investigations exhibited an additional low potential oxidation in the case of Fc-DPP-TPA based derivatives ( 4 – 6 ) owing to the presence of ferrocene unit(s). This was in addition to DPP and TPA redox peaks. Using spectral, electrochemical and computational studies, Gibbs free-energy calculations were performed to visualize excited state charge separation (ΔG_CS) in these donor–acceptor conjugates as a function of different number of Fc-DPP entities. Formation of Fc⁺-DPP^.−-TPA charge separated states (CSS) in the case of 4 – 6 was evident. Using spectroelectrochemical studies, spectrum of CSS was deduced. Finally, femtosecond transient absorption spectral studies were performed to gather information on excited state charge separation. Increasing the number of Fc-DPP entities in 4 – 6 improved charge separation rates. Surprisingly, lifetime of the charge separated state, Fc⁺-DPP^.−-TPA was found to persist longer with an increase in the number of Fc-DPP entities in 4 – 6 as compared to Fc-DPP-control and simple DPP derived donor–acceptor conjugates in literature. This unprecedented result has been attributed to subtle changes in ΔG_CS and ΔG_CR and the associated electron coupling between different entities.     

An Electron-Accepting aza-BODIPY-Based Donor–Acceptor–Donor Architecture for Bright NIR Emission

A bright near-infrared (NIR) fluorescent molecule was developed based on the donor–acceptor–donor (D–A–D) approach using an aza-BODIPY analog called pyrrolopyrrole aza-BODIPY (PPAB) as an electron-accepting chromophore. Directly introducing electron-donating triphenylamine (TPA) to develop a D–A–D structure caused redshifts of absorption and emission of PPAB into the NIR region with an enhanced fluorescence brightness of up to 5.2×10⁴ m ⁻¹ cm⁻¹, whereas inserting a phenylene linker between the TPA donor and the PPAB acceptor induced solvatochromic behavior in emission. Transient absorption spectra and theoretical calculations revealed the presence of a highly emissive hybridized locally excited and charge-transfer state in the former case and the contribution of the dark charge-separated state to the excited state in the latter case. The bright D–A–D PPAB as a novel emitter resulted in a NIR electroluminescence with a high external quantum efficiency of 3.7 % and a low amplified spontaneous emission threshold of ca. 80 μJ cm⁻², indicating the high potential for NIR optoelectronic applications.     

Geometrical Changes and Their Energies in the Formation of Donor–Acceptor Complexes

We have mapped the energy demands of the geometrical changes in donor–acceptor complexes BH₃NH₃ and AlCl₃NH₃ and in the course of their formation from their monomers. We have varied the individual geometrical parameters systematically and performed ab initio quantum chemical calculations for these structures. We investigated the energy requirements to change bond lengths and bond angles in both the monomers and complexes and the angles of torsion in the complexes. The changes of bond lengths require more energy in the monomers than in the complexes. The energies to change the acceptor bond angles in the monomers are markedly higher than in the complexes. The changes in the geometrical parameters during the complexation process are more moderate in donors than in acceptors, in agreement with prior experimental observations. The geometry versus energy variations related to the process of complexation are in agreement with the notion of relative rigidity of the donor parts and the more compliant nature of the acceptor parts as well as with the notion of competing effects in the structures of the complexes.     

The Impact of C2 Insertion into a Carbazole Donor on the Physicochemical Properties of Dibenzo[a,j]phenazine-Cored Donor–Acceptor–Donor Triads

Novel electron donor–acceptor–donor (D-A-D) compounds comprising dibenzo[a,j]phenazine as the central acceptor core and two 7-membered diarylamines (iminodibenzyl and iminostilbene) as the donors have been designed and synthesized. Investigation of their physicochemical properties revealed the impact of C₂ insertion into well-known carbazole electron donors on the properties of previously reported twisted dibenzo[a,j]phenazine-core D-A-D triads. Slight structural modification caused a drastic change in conformational preference, allowing unique photophysical behavior of dual emission derived from room-temperature phosphorescence and triplet–triplet annihilation. Furthermore, electrochemical analysis suggested sigma-dimer formation and electrochemical polymerization on the electrode. Quantum chemical calculations also rationalized the experimental results.     

Oligothiophene-Ring-Strapped Perylene Bisimides: Functionalizable Coaxial Donor–Acceptor Macrocycles

Aesthetic designs from nature enable new knowledge to be gained and, at the same time, inspire scientific models. In this context, multicomponent macrocycles embody the advantage of precisely positioning the structural units to achieve efficient communication between them. However, the construction of a functionalizable macrocycle for ultrafast charge separation and stabilization has not been attempted. Herein, we report the synthesis, crystal structure, and transient absorption of a new functionalizable macrocycle consisting of an oligothiophene-ring-strapped perylene bisimide. Transient absorption results point to a sequential improvement in charge separation and stabilization from the macrocycle to the corresponding linear dimer and 2D polymer due to the unique design. Our macrocycle design with a supportive spatial arrangement of the donor and acceptor units will inspire the development of more complex synthetic systems with exciting electron-transfer and charge-separation features.     

Asymmetric Acceptor–Donor–Acceptor Polymers with Fast Charge Carrier Transfer for Solar Hydrogen Production

Construction of local donor–acceptor architecture is one of the valid means for facilitating the intramolecular charge transfer in organic semiconductors. To further accelerate the interface charge transfer, a ternary acceptor–donor–acceptor (A₁-D-A₂) molecular junction is established via gradient nitrogen substituting into the polymer skeleton. Accordingly, the exciton splitting and interface charge transfer could be promptly liberated because of the strong attracting ability of the two different electron acceptors. Both DFT calculations and photoluminescence spectra elucidate the swift charge transfer at the donor-acceptor interface. Consequently, the optimum polymer, N₃-CP, undergoes a remarkable photocatalytic property in terms of hydrogen production with AQY_{405 nm}=26.6 % by the rational design of asymmetric molecular junctions on organic semiconductors.     

Visible-Light-Induced Insertion of Sulfur Dioxide Mediated by Electron Donor–Acceptor Complex: Synthesis and Photophysical Properties of 3-Sulfonyl Indolizines

This work investigates a light-driven 3-component sulfonylation reaction of indolizines without needing any external photocatalyst. The mechanistic investigations support the formation of an electron donor–acceptor (EDA) complex in situ. This transformation offers a mild and sustainable approach with high functional group tolerance for the synthesis of 3-sulfonylated indolizines. This compound class has valuable photophysical properties and represents promising candidates in various applications related to fluorescence.     

Synthesis of OMS Materials and Investigation of Their Acceptor–Donor Characteristics

Three ordered mesoporous siliceous (OMS) materials known as MCM41s—unmodified MCM-41C16 (“C16”), and two MCM41s with different surface functionalities: MCM-41C16-SH (“C16-SH”) and MCM-41C16-NH₂ (“C16-NH₂”)—were synthesized and studied by inverse gas chromatography in order to determine their acceptor–donor properties. The specific retention volumes of nonpolar and polar probes that were chromatographed on these ordered mesoporous silica adsorbents were evaluated under infinite dilution conditions. Two methods were employed to calculate the standard free energy of adsorption, ΔG _ads, of each chromatographed probe on the basis its specific retention volume. These ΔG _ads values were then employed to estimate the van der Waals contribution and the specific contribution of the free surface energy for each MCM41. DN values (donor numbers, based on the Gutmann scale) and AN* values (acceptor numbers, based on the Riddle–Fowkes scale) were employed to determine the values of parameters that characterize the ability of the MCM41s to act as electron acceptors (parameter: K _A) and donors (parameter: K _D). Considering the different compositions of the probes, each of which has different acceptor–donor properties, a new chromatographic test to supplement the Grob test is suggested.     

Donor–Acceptor Stenhouse Adducts: Exploring the Effects of Ionic Character

The effects of solution-state dielectric and intermolecular interactions on the degree of charge separation provide a route to understanding the switching properties and concentration dependence of donor–acceptor Stenhouse adducts (DASAs). Through solvatochromic analysis of the open-form DASA in conjunction with X-ray diffraction and computational theory, we have analyzed the ionic character of a series of DASAs. First- and third-generation architectures lead to a higher zwitterionic resonance contribution of the open form and a zwitterionic closed form, whereas the second-generation architecture possesses a less charge-separated open form and neutral closed form. This can be correlated with equilibrium control and photoswitching solvent compatibility. As a result of the high contribution of the zwitterionic resonance forms of first- and third-generation DASAs, we were able to control their switching kinetics by means of ion concentration, whereas second-generation DASAs were less affected. Importantly, these results show how the previously reported concentration dependence of DASAs is not universal, and that DASAs with a more hybrid structure in the open form can achieve photoswitching at high concentrations.     

Synthesis and Characterization of Thiophene-based Donor–Acceptor–Donor Heptameric Ligands for Spectral Assignment of Polymorphic Amyloid-β Deposits

Protein deposits are associated with many devastating diseases and fluorescent ligands able to visualize these pathological entities are essential. Here, we report the synthesis of thiophene-based donor–acceptor–donor heptameric ligands that can be utilized for spectral assignment of distinct amyloid-β (Aβ) aggregates, one of the pathological hallmarks in Alzheimer's disease. The ability of the ligands to selectively distinguish Aβ deposits was abolished when the chemical composition of the ligands was altered. Our findings provide the structural and functional basis for the development of new fluorescent ligands that can distinguish between aggregated proteinaceous species consisting of the same peptide or protein. In addition, such ligands might aid in interpreting the potential role of polymorphic Aβ deposits in the pathogenesis of Alzheimer's disease.     

Enhanced Light-Driven Hydrogen-Production Activity Induced by Accelerated Interfacial Charge Transfer in Donor–Acceptor Conjugated Polymers/TiO2 Hybrid

Donor–acceptor (D–A) conjugated polymers have proved to be desired candidates to couple with inorganic semiconductors for enhanced photocatalytic activity. Herein, the matched energy levels between polymer BFB and TiO₂ make them form BFB-TiO₂ composites with moderate photocatalytic H₂ evolution rate (HER). To further enhance the interfacial interaction, BFB was modified with a carboxylic acid end group, which reacted with surface OH of TiO₂ to form an ester bond. As a result, the functionalized BFBA-TiO₂ composites exhibited superior photocatalytic activity. Especially, HER of 4 % BFBA-TiO₂ can reach up to 228.2 μmol h⁻¹ under visible light irradiation (λ>420 nm), which is about 2.02 times higher than that of BFB-TiO₂. The enhanced photocatalytic activity originated from the formed ester bond between polymer and TiO₂, and photogenerated electrons injection from lowest unoccupied molecular orbital (LUMO) of the exited polymer to conduction band of TiO₂ were accelerated. Therefore, based on an intermolecular interaction mechanism, more suitable D–A conjugated polymers with anchoring groups could be designed to couple with other semiconductors for enhancing photocatalytic activity.