Cu/CdCO3 catalysts for efficient electrochemical CO2 reduction over the wide potential window

High efficiency and low-cost catalyst-driven electrocatalytic CO₂ reduction to CO production are of great significance for energy storage and development. The severe competitive hydrogen evolution reaction occurs at large negative potential window limits the achievement of the target product from CO₂ at high efficiency. Here, we successfully prepared Cu_x/CdCO₃ composite catalyst rich in interfaces, in which achieved high CO Faraday efficiency exceeded 90% in a wide potential window of 700 mV and highest value up to 97.9% at −0.90 V vs. RHE. The excellent performance can be ascribed to the positive contribution of Cu_x/CdCO₃, which maintains a suitable high local pH value during electrochemical reduction, thus inhibiting the competitive hydrogen evolution reaction. Moreover, the compact structure between Cu and CdCO₃ ensures fast electron transfer both inside catalysts and interface, thus speeding up the reaction kinetics of CO₂ to CO conversion. Theoretically calculations further prove that the combination of Cu and CdCO₃ provides the well-defined electronic structure for intermediates adsorption, significantly reducing the reaction barrier for the formation of CO. This work provides new insights into the design of efficient electrochemical CO₂ reduction catalysts for inhibiting hydrogen evolution by adjusting the local pH effect.     

Aqueous Photoelectrochemical CO2 Reduction to CO and Methanol over a Silicon Photocathode Functionalized with a Cobalt Phthalocyanine Molecular Catalyst

We report a precious-metal-free molecular catalyst-based photocathode that is active for aqueous CO₂ reduction to CO and methanol. The photoelectrode is composed of cobalt phthalocyanine molecules anchored on graphene oxide which is integrated via a (3-aminopropyl)triethoxysilane linker to p-type silicon protected by a thin film of titanium dioxide. The photocathode reduces CO₂ to CO with high selectivity at potentials as mild as 0 V versus the reversible hydrogen electrode (vs RHE). Methanol production is observed at an onset potential of −0.36 V vs RHE, and reaches a peak turnover frequency of 0.18 s⁻¹. To date, this is the only molecular catalyst-based photoelectrode that is active for the six-electron reduction of CO₂ to methanol. This work puts forth a strategy for interfacing molecular catalysts to p-type semiconductors and demonstrates state-of-the-art performance for photoelectrochemical CO₂ reduction to CO and methanol.     

Liquid Fluxional Ga Single Atom Catalysts for Efficient Electrochemical CO2 Reduction

Precise design and tuning of the micro-atomic structure of single atom catalysts (SACs) can help efficiently adapt complex catalytic systems. Herein, we inventively found that when the active center of the main group element gallium (Ga) is downsized to the atomic level, whose characteristic has significant differences from conventional bulk and rigid Ga catalysts. The Ga SACs with a P, S atomic coordination environment display specific flow properties, showing CO products with FE of ≈92 % at −0.3 V vs. RHE in electrochemical CO₂ reduction (CO₂RR). Theoretical simulations demonstrate that the adaptive dynamic transition of Ga optimizes the adsorption energy of the *COOH intermediate and renews the active sites in time, leading to excellent CO₂RR selectivity and stability. This liquid single atom catalysts system with dynamic interfaces lays the foundation for future exploration of synthesis and catalysis.     

Enhanced Electrochemical Reduction of CO2 to CO on Ag/SnO2 by a Synergistic Effect of Morphology and Structural Defects

Silver (Ag)-based materials are considered to be promising materials for electrochemical reduction of CO₂ to produce CO, but the selectivity and efficiency of traditional polycrystalline Ag materials are insufficient; there still exists a great challenge to explore novel modified Ag based materials. Herein, a nanocomposite of Ag and SnO₂ (Ag/SnO₂) for efficient reduction of CO₂ to CO is reported. HRTEM and XRD patterns clearly demonstrated the lattice destruction of Ag and the amorphous SnO₂ in the Ag/SnO₂ nanocomposite. Electrochemical tests indicated the nanocomposite containing 15% SnO₂ possesses highest catalytic selectivity featured by a CO faradaic efficiency (FE) of 99.2% at −0.9 V versus reversible hydrogen electrode (vs RHE) and FE>90% for the CO product at a wide potential range from −0.8 V to −1.4 V vs RHE. Experimental characterization and analysis showed that the high catalytic performance is attributed to not only the branched morphology of Ag/SnO₂ nanocomposites (NCs), which endows the maximum exposure of active sites, but also the special adsorption capacity of abundant defect sites in the crystal for *COOH (the key intermediate of CO formation), which improves the intrinsic activity of the catalyst. But equally important, the existed SnO₂ also plays an important role in inhibiting hydrogen evolution reaction (HER) and anchoring defect sites. This work demonstrates the use of crystal defect engineering and synergy in composite to improve the efficiency of electrocatalytic CO₂ reduction reaction (CO₂RR).     

Understanding of Strain Effects in the Electrochemical Reduction of CO2: Using Pd Nanostructures as an Ideal Platform

Tuning the surface strain of heterogeneous catalysts represents a powerful strategy to engineer their catalytic properties by altering the electronic structures. However, a clear and systematic understanding of strain effect in electrochemical reduction of carbon dioxide is still lacking, which restricts the use of surface strain as a tool to optimize the performance of electrocatalysts. Herein, we demonstrate the strain effect in electrochemical reduction of CO₂ by using Pd octahedra and icosahedra with similar sizes as a well‐defined platform. The Pd icosahedra/C catalyst shows a maximum Faradaic efficiency for CO production of 91.1 % at −0.8 V versus reversible hydrogen electrode (vs. RHE), 1.7‐fold higher than the maximum Faradaic efficiency of Pd octahedra/C catalyst at −0.7 V (vs. RHE). The combination of molecular dynamic simulations and density functional theory calculations reveals that the tensile strain on the surface of icosahedra boosts the catalytic activity by shifting up the d ‐band center and thus strengthening the adsorption of key intermediate COOH*. This strain effect was further verified directly by the surface valence‐band photoemission spectra and electrochemical analysis.     

In Situ Bismuth Nanosheet Assembly for Highly Selective Electrocatalytic CO2 Reduction to Formate

The reduction of carbon dioxide (CO₂) into value-added fuels using an electrochemical method has been regarded as a compelling sustainable energy conversion technology. However, high-performance electrocatalysts for CO₂ reduction reaction (CO₂RR) with high formate selectivity and good stability need to be improved. Earth-abundant Bi has been demonstrated to be active for CO₂RR to formate. Herein, we fabricated an extremely active and selective bismuth nanosheet (Bi-NSs) assembly via an in situ electrochemical transformation of (BiO)₂CO₃ nanostructures. The as-prepared material exhibits high activity and selectivity for CO₂RR to formate, with nearly 94% faradaic efficiency at −1.03 V (versus reversible hydrogen electrode (vs. RHE)) and stable selectivity (>90%) in a large potential window ranging from −0.83 to −1.18 V (vs. RHE) and excellent durability during 12 h continuous electrolysis. In addition, the Bi-NSs based CO₂RR/methanol oxidation reaction (CO₂RR/MOR) electrolytic system for overall CO₂ splitting was constructed, evidencing the feasibility of its practical implementation.     

In Situ Reconstruction of a Hierarchical Sn-Cu/SnOx Core/Shell Catalyst for High-Performance CO2 Electroreduction

The electrochemical CO₂ reduction reaction (CO₂RR) to give C₁ (formate and CO) products is one of the most techno-economically achievable strategies for alleviating CO₂ emissions. Now, it is demonstrated that the SnO_x shell in Sn_2.7Cu catalyst with a hierarchical Sn-Cu core can be reconstructed in situ under cathodic potentials of CO₂RR. The resulting Sn_2.7Cu catalyst achieves a high current density of 406.7±14.4 mA cm⁻² with C₁ Faradaic efficiency of 98.0±0.9 % at −0.70 V vs. RHE, and remains stable at 243.1±19.2 mA cm⁻² with a C₁ Faradaic efficiency of 99.0±0.5 % for 40 h at −0.55 V vs. RHE. DFT calculations indicate that the reconstructed Sn/SnO_x interface facilitates formic acid production by optimizing binding of the reaction intermediate HCOO* while promotes Faradaic efficiency of C₁ products by suppressing the competitive hydrogen evolution reaction, resulting in high Faradaic efficiency, current density, and stability of CO₂RR at low overpotentials.     

Electrodeposition at Highly Negative Potentials of an Iron-Cobalt Oxide Catalyst for Use in Electrochemical Water Splitting

Earth-abundant transition metal-based catalysts have been extensively investigated for their applicability in water electrolysers to enable overall water splitting to produce clean hydrogen and oxygen. In this study a Fe−Co based catalyst is electrodeposited in 30 seconds under vigorous hydrogen evolution conditions to produce a high surface area material that is active for both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). This catalyst can achieve high current densities of 600 mAcm⁻² at an applied potential of 1.6 V (vs RHE) in 1 M NaOH with a Tafel slope value of 48 mV dec⁻¹ for the OER. In addition, the HER can be facilitated at current densities as high as 400 mA cm⁻² due to the large surface area of the material. The materials were found to be predominantly amorphous but did contain crystalline regions of CoFe₂O₄ which became more evident after the OER indicating interesting compositional and structural changes that occur to the catalyst after an electrocatalytic reaction. This rapid method of creating a bimetallic oxide electrode for both the HER and OER could possibly be adopted to other bimetallic oxide systems suitable for electrochemical water splitting.     

Molecular Modification of Single Cobalt Sites Boosts the Catalytic Activity of CO2 Electroreduction into CO

Electroreduction of CO₂ into carbonaceous fuels or industrial chemicals using renewable energy sources is an ideal way to promote global carbon recycling. Thus, it is of great importance to develop highly selective, efficient, and stable catalysts. Herein, we prepared cobalt single atoms (Co SAs) coordinated with phthalocyanine (Co SAs-Pc). The anchoring of phthalocyanine with Co sites enabled electron transfer from Co sites to CO₂ effectively via the π-conjugated system, resulting in high catalytic performance of CO₂ electroreduction into CO. During the process of CO₂ electroreduction, the Faradaic efficiency (FE) of Co SAs-Pc for CO was as high as 94.8 %. Meanwhile, the partial current density of Co SAs-Pc for CO was −11.3 mA cm⁻² at −0.8 V versus the reversible hydrogen electrode (vs RHE), 18.83 and 2.86 times greater than those of Co SAs (−0.60 mA cm⁻²) and commercial Co phthalocyanine (−3.95 mA cm⁻²), respectively. In an H-cell system operating at −0.8 V vs RHE over 10 h, the current density and FE for CO of Co SAs-Pc dropped by 3.2 % and 2.5 %. A mechanistic study revealed that the promoted catalytic performance of Co SAs-Pc could be attributed to the accelerated reaction kinetics and facilitated CO₂ activation.     

Self-Supported Nanoporous Au3Cu Electrode with Enriched Gold on Surface for Efficient Electrochemical Reduction of CO2

The key to the electrochemical conversion of CO₂ lies in the development of efficient electrocatalysts with ease of operation, good conductivity, and rich active sites that fulfil the desired reaction direction and selectivity. Herein, an oxidative etching of Au₂₀Cu₈₀ alloy is used for the synthesis of a nanoporous Au₃Cu alloy, representing a facile strategy for tuning the surface electronic properties and altering the adsorption behavior of the intermediates. HRTEM, XPS, and EXAFS results reveal that the curved surface of the synthesized nanoporous Au₃Cu is rich in gold with unsaturated coordination conditions. It can be used directly as a self-supported electrode for CO₂ reduction, and exhibits high Faradaic efficiency (FE) of 98.12 % toward CO at a potential of −0.7 V versus the reversible hydrogen electrode (RHE). The FE is 1.47 times that over the as-made single nanoporous Au. Density functional theory reveals that *CO has a relatively long distance on the surface of nanoporous Au₃Cu, making desorption of CO easier and avoiding CO poisoning. The Hirshfeld charge distribution shows that the Au atoms have a negative charge and the Cu atoms exhibit a positive charge, which separately bond to the C atom and O atom in the *COOH intermediate through a bidentate mode. This affords the lowest *COOH adsorption free energy and low desorption energy for CO molecules.     

A Versatile Iron–Tannin‐Framework Ink Coating Strategy to Fabricate Biomass‐Derived Iron Carbide/Fe‐N‐Carbon Catalysts for Efficient Oxygen Reduction

The conversion of biomass into valuable carbon composites as efficient non‐precious metal oxygen‐reduction electrocatalysts is attractive for the development of commercially viable polymer electrolyte membrane fuel‐cell technology. Herein, a versatile iron–tannin‐framework ink coating strategy is developed to fabricate cellulose‐derived Fe₃C/Fe‐N‐C catalysts using commercial filter paper, tissue, or cotton as a carbon source, an iron–tannin framework as an iron source, and dicyandiamide as a nitrogen source. The oxygen reduction performance of the resultant Fe₃C/Fe‐N‐C catalysts shows a high onset potential (i.e. 0.98 V vs the reversible hydrogen electrode (RHE)), and large kinetic current density normalized to both geometric electrode area and mass of catalysts (6.4 mA cm^?2 and 32 mA mg^?1 at 0.80 V vs RHE) in alkaline condition. This method can even be used to prepare efficient catalysts using waste carbon sources, such as used polyurethane foam.     

High-Curvature Transition-Metal Chalcogenide Nanostructures with a Pronounced Proximity Effect Enable Fast and Selective CO2 Electroreduction

A considerable challenge in the conversion of carbon dioxide into useful fuels comes from the activation of CO₂ to CO₂^.− or other intermediates, which often requires precious-metal catalysts, high overpotentials, and/or electrolyte additives (e.g., ionic liquids). We report a microwave heating strategy for synthesizing a transition-metal chalcogenide nanostructure that efficiently catalyzes CO₂ electroreduction to carbon monoxide (CO). We found that the cadmium sulfide (CdS) nanoneedle arrays exhibit an unprecedented current density of 212 mA cm⁻² with 95.5±4.0 % CO Faraday efficiency at −1.2 V versus a reversible hydrogen electrode (RHE; without iR correction). Experimental and computational studies show that the high-curvature CdS nanostructured catalyst has a pronounced proximity effect which gives rise to large electric field enhancement, which can concentrate alkali-metal cations resulting in the enhanced CO₂ electroreduction efficiency.     

A Biomass-Derived Carbon-Based Electrocatalyst for Efficient N2 Fixation to NH3 under Ambient Conditions

Currently, NH₃ production primarily depends on the Haber–Bosch process, which operates at elevated temperatures and pressures and leads to serious CO₂ emissions. Electrocatalytic N₂ reduction offers an environmentally benign approach for the sustainable synthesis of NH₃ under ambient conditions. This work reports the development of biomass-derived amorphous oxygen-doped carbon nanosheet (O−CN) using tannin as the precursor. As a metal-free electrocatalyst for N₂-to-NH₃ conversion, such O−CN shows high catalytic performances, achieving a large NH₃ yield of 20.15 μg h⁻¹ mg⁻¹_cat. and a high Faradic efficiency of 4.97 % at −0.6 V vs. reversible hydrogen electrode (RHE) in 0.1 m HCl at ambient conditions. Remarkably, it also exhibits high electrochemical selectivity and durability.     

One-Step Preparation of Fe/N/C Single-Atom Catalysts Containing Fe−N4 Sites from an Iron Complex Precursor with 5,6,7,8-Tetraphenyl-1,12-Diazatriphenylene Ligands

Fe/N/C single-atom catalysts containing Fe−N_x sites prepared by pyrolysis are promising cathode materials for fuel cells and metal-air batteries due to their high oxygen reduction reaction (ORR) activities. We have developed iron complexes containing N2- or N3-chelating coordination structures with preorganized aromatic rings in a 1,12-diazatriphenylene framework tethering bromo substituents as precursors to precisely construct Fe−N₄ sites in an Fe/N/C catalyst. One-step pyrolysis of the iron complex with carbon black forms atomically dispersed Fe−N₄ sites without iron aggregates. X-ray absorption spectroscopy (XAS) and electrochemical measurements revealed that the iron complex with N3-coordination is more effectively converted to Fe−N₄ sites catalyzing ORR with a TOF value of 0.21 e site⁻¹ s⁻¹ at 0.8 V vs. RHE. This indicates that the formation of Fe−N₄ sites is controlled by precise tuning of the chemical structure of the iron complex precursor.     

Boosting electrocatalytic selectivity in carbon dioxide reduction: The fundamental role of dispersing gold nanoparticles on silicon nanowires

Carbon dioxide electrochemical reduction (CO₂RR) has been recognized as an efficient way to mitigate CO₂ emissions and alleviate the pressure on global warming and associated environmental consequences. Gold (Au) is reported as stable and active electrocatalysts to convert CO₂ to CO at low overpotential due to its moderate adsorption strength of *COOH and *CO. The request for improved catalytic performance, however, is motivated by current unsatisfied catalytic selectivity because of the side hydrogen evolution reaction. In this context, the design of Au based binary catalysts that can boost CO selectivity is of great interest. In the present work, we report that Au nanoparticles can be feasibly dispersed and anchored on silicon nanowires to form Au-Si binary nanomaterials. The Au-Si may stably drive CO₂RR with a CO Faraday efficiency of 95.6% at ?0.6 V vs. RHE in 0.5 mol/L KHCO₃ solution. Such selectivity outperforms Au particles by up to 61%. Controlled experiments illustrate that such catalytic enhancement can chiefly be ascribed to electronic effects of binary catalysts. Theoretical calculations reveal that spontaneously produced silicon oxide may not only inhibit hydrogen evolution reaction, but also stabilize the key intermediate *COOH in CO formation.     

Integrated Ultrafine Co0.85Se in Carbon Nanofibers: An Efficient and Robust Bifunctional Catalyst for Oxygen Electrocatalysis

Transition-metal selenides are emerging as alternative bifunctional catalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR); however, their activity and stability are still less than desirable. Herein, ultrafine Co_0.85Se nanoparticles encapsulated into carbon nanofibers (CNFs), Co_0.85Se@CNFs, is reported as an integrated bifunctional catalyst for OER and ORR. This catalyst exhibits a low OER potential of 1.58 V vs. reversible hydrogen electrode (RHE) (E_{J=10, OER}) to achieve a current density (J) of 10 mA cm⁻² and a high ORR potential of 0.84 V vs. RHE (E_{J=−1, ORR}) to reach −1 mA cm⁻². Thus, the potential between E_{J=10, OER} and E_{J=−1, ORR} is only 0.74 V, indicating considerable bifunctional activity. The excellent bifunctionality can be attributed to high electronic conduction, abundant electrochemically active sites, and the synergistic effect of Co_0.85Se and CNFs. Furthermore, this Co_0.85Se@CNFs catalyst displays good cycling stability for both OER and ORR. This study paves a new way for the rational design of hybrid catalysts composed of transition-metal selenides and carbon materials for efficiently catalyzing OER and ORR.     

Design of a Single-Atom Indiumδ+–N4 Interface for Efficient Electroreduction of CO2 to Formate

Main-group element indium (In) is a promising electrocatalyst which triggers CO₂ reduction to formate, while the high overpotential and low Faradaic efficiency (FE) hinder its practical application. Herein, we rationally design a new In single-atom catalyst containing exclusive isolated In^δ+–N₄ atomic interface sites for CO₂ electroreduction to formate with high efficiency. This catalyst exhibits an extremely large turnover frequency (TOF) up to 12500 h⁻¹ at −0.95 V versus the reversible hydrogen electrode (RHE), with a FE for formate of 96 % and current density of 8.87 mA cm⁻² at low potential of −0.65 V versus RHE. Our findings present a feasible strategy for the accurate regulation of main-group indium catalysts for CO₂ reduction at atomic scale.     

Fluorine-Stabilized Defective Black Phosphorene as a Lithium-Like Catalyst for Boosting Nitrogen Electroreduction to Ammonia

Electrocatalytic N₂ reduction reaction (NRR) is recognized as a zero-carbon emission method for NH₃ synthesis. However, to date, this technology still suffers from low yield and low selectivity associated with the catalyst. Herein, inspired by the activation of N₂ by lithium metal, a highly reactive defective black phosphorene (D−BP_ene) is proposed as a lithium-like catalyst for boosting electrochemical N₂ activation. Correspondingly, we also report a strategy for producing environmentally stable D−BP_ene by simultaneously constructing defects and fluorination protection based on topochemical reactions. Reliable performance evaluations show that the fluorine-stabilized D−BP_ene can induce a high NH₃ yield rate of ≈70 μg h⁻¹ mg_cat.⁻¹ and a high Faradaic efficiency of ≈26 % at −0.5 V vs. RHE in an aqueous electrolyte. This work not only exemplifies the first stable preparation and practical application of D−BP_ene, but also brings a new design idea for NRR catalysts.     

Modulating Metal-Nitrogen Coupling in Anti-Perovskite Nitride via Cation Doping for Efficient Reduction of Nitrate to Ammonia

The complexes of metal center and nitrogen ligands are the most representative systems for catalyzing hydrogenation reactions in small molecule conversion. Developing heterogeneous catalysts with similar active metal-nitrogen functional centers, nevertheless, still remains challenging. In this work, we demonstrate that the metal-nitrogen coupling in anti-perovskite Co₄N can be effective modulated by Cu doping to form Co₃CuN, leading to strongly promoted hydrogenation process during electrochemical reduction of nitrate (NO₃⁻RR) to ammonia. The combination of advanced spectroscopic techniques and density functional theory calculations reveal that Cu dopants strengthen the Co−N bond and upshifted the metal d-band towards the Fermi level, promoting the adsorption of NO₃⁻ and *H and facilitating the transition from *NO₂/*NO to *NO₂H/*NOH. Consequently, the Co₃CuN delivers noticeably better NO₃⁻RR activity than the pristine Co₄N, with optimal Faradaic efficiency of 97 % and ammonia yield of 455.3 mmol h⁻¹ cm⁻² at −0.3 V vs. RHE. This work provides an effective strategy for developing high-performance heterogeneous catalyst for electrochemical synthesis.     

Selective CO2-to-Syngas Conversion Enabled by Bimetallic Gold/Zinc Sites in Partially Reduced Gold/Zinc Oxide Arrays

Electrocatalytic CO₂-to-syngas (gaseous mixture of CO and H₂) is a promising way to curb excessive CO₂ emission and the greenhouse gas effect. Herein, we present a bimetallic AuZn@ZnO (AuZn/ZnO) catalyst with high efficiency and durability for the electrocatalytic reduction of CO₂ and H₂O, which enables a high Faradaic efficiency of 66.4 % for CO and 26.5 % for H₂ and 3 h stability of CO₂-to-syngas at −0.9 V vs. the reversible hydrogen electrode (RHE). The CO/H₂ ratios show a wide range from 0.25 to 2.50 over a narrow potential window (−0.7 V to −1.1 V vs. RHE). In situ attenuated total reflection surface-enhanced infrared absorption spectroscopy combined with density functional theory calculations reveals that the bimetallic synergistic effect between Au and Zn sites lowers the activation energy barrier of CO₂ molecules and facilitates electronic transfer, further highlighting the potential to control CO/H₂ ratios for efficient syngas production using the coexisting Au sites and Zn sites.