Pseudo-capacitance of nanoporous carbons in pyrrolidinium-based protic ionic liquids

Protic ionic liquids (PILs) were used as novel electrolyte for carbon-based supercapacitors. The cyclic voltammograms in three-electrode cells show reversible redox humps, revealing pseudo-faradaïc charge transfer. Oxidative treatment of activated carbon enriches the surface functionality and leads to a higher capacitance owing to a stronger pseudo-faradaïc contribution. The capacitors using PILs demonstrate a higher voltage window than with aqueous H₂SO₄, while keeping the same values of capacitance, and being able to operate at lower temperature. A combination of activated carbons and PILs holds promise for improving the energy characteristics of supercapacitors.     

Dual‐Responsive Viscoelastic Lyotropic Liquid Crystal Fluids to Control the Diffusion of Hydrophilic and Hydrophobic Molecules

A smart lyotropic liquid crystal (LLC) system was prepared to control the diffusion rate of hydrophilic and hydrophobic molecules. The LLC system is composed of a nonionic surfactant (tetraethylene glycol monododecylether; C₁₂EO₄) and an anionic azobenzene surfactant (Azo‐surfactant). C₁₂EO₄ was the main component of the LLC system. The Azo‐surfactant, which can undergo photo‐isomerization, played the role of trigger in this system. LLC gels formed in a solution comprised of Azo‐surfactant (10 mm ) and C₁₂EO₄ (300 mm ). The LLC gels became broken when more Azo‐surfactant was added (e.g., up to 15 mm ) and the viscoelasticity was lost. Surprisingly, when we used UV light to irradiate the 300 mm C₁₂EO₄/15 mm Azo‐surfactant sample, the gel was recovered and high viscoelasticity was observed. However, under visible‐light irradiation, the gel became broken again. The gel formation could also be triggered by heating the sample. On heating the 300 mm C₁₂EO₄/15 mm Azo‐surfactant sample, the system thickened to a point at which typical gel behavior was registered. When the sample was cooled, the gel broke again. The LLC could be used for controlled release of hydrophilic and hydrophobic molecules, and could be considered as a versatile vehicle for the delivery of actives in systems of practical importance.     

Stimuli-Responsive Macromolecular Architecture by Butler Cyclopolymerizations: Synthesis and Applications

This article reviews the synthesis of polyzwitterions (PZs) (poly-carboxybetaines, -phosphonobetaines, and -sulfobetaines) having multiple pH-responsive centers. The synthesis follows the Butler cyclopolymerization protocol involving a multitude of diallylammonium salts and their copolymerization with SO₂ and maleic acid. The PZs have been transformed into cationic-, anionic-polyelectrolytes, and polyampholytes under the influence of pH. Particular attention is given to the application of these polymers as antiscalants, mild steel corrosion inhibitors, components in constructing Aqueous Two-Phase Systems (ATPSs), and membrane modifiers. The ATPSs could be used to separate various biomolecules, including proteins. Many amphiphilic polymers incorporating a few mol % hydrophobic monomers have shown enhanced viscosities and could be suitable for applications in oil fields. The progress of applying Butler cyclopolymerization in reversible addition-fragmentation chain transfer (RAFT) chemistry has been discussed. Future works are expected to focus on RAFT cyclopolymerization to construct block copolymers.     

Drop formation in aqueous two-phase systems

Extraction using aqueous two-phase systems (ATPSs) is a versatile technique for the downstream processing of various proteins/enzymes. The study of drop formation deals with the fundamental understanding of the behavior of liquid drops under the influence of various external body as well as surface forces. These studies provide a basis for designing of the extractions in column contactors in which liquid drops play a major role. Most of the drop formation studies reported so far is restricted to aqueous-organic systems. ATPSs, differ from aqueous-organic systems in their physical properties. In view of this, an attempt was made to develop a model for drop formation in ATPSs adopting the information available on aqueous-organic systems. In order to validate the model, experiments were performed by using polyethylene glycol (PEG)/salt systems of different phase compositions at various flow rates. At low flow rates the single stage model and at high flow rates the two stage model are able to predict the drop volume during its formation from tip of capillary. The experimental results were found to agree reasonably well with those predicted by the model.     

A dielectric study of poly(ethylene-co-vinylacetate)–poly(vinyl chloride) blends. I. Miscibility and phase behavior

Measurements of the complex permittivity were used to study miscibility and phase behavior in blends of poly(vinyl chloride) (PVC) with two random ethylene—vinyl acetate (EVA) copolymers containing 45 and 70 wt % of vinyl acetate. The dielectric β relaxation of the pure polymers and blends was followed as a function of temperature and frequency for different blend compositions and thermal treatments. Blends of EVA 70/PVC were found to be miscible for compositions of about 25% EVA 70 and higher. Blends of lower EVA 70 content showed evidence of two-phase behavior. EVA 45/PVC blends were found to be miscible only at the composition extremes; at intermediate compositions these blends were two-phase, partially miscible. Both blend systems showed lower critical solution temperature behavior. Phase separation studies revealed that in the EVA 45/PVC blends, PVC was capable of diffusing into the higher T_g phase at temperatures below the T_g of the upper phase. In the blends, ion transport losses were significant above the loss peak temperatures, and in the two-phase systems, often obscured the upper temperature loss process. It was shown possible, however, to correct the loss curves for this transport contribution.     

Partitioning behavior of amino acids in aqueous two-phase systems containing polyethylene glycol and phosphate buffer

The partitioning behavior of four amino acids, cysteine, phenylalanine, methionine, and lysine in 15 aqueous two-phase systems (ATPSs) with different polyethylene glycol (PEG) molecular weights and phosphate buffers has been studied in the present paper. The phase diagrams of the systems are investigated together with the effect of the PEG molecular weight and pH of the phosphate solutions. The composition of these systems and some parameters such as density and refractive index are determined. The influences of salts in ATPSs, side chain structure of the amino acids, pH of ATPSs, and the PEG molecular weight on the distribution ratios of the amino acids have been studied. This work is useful for the purification of amino acids and the separation of some proteins whose main surface exposed amino acid residues are these four amino acids, respectively.     

Liquid–Liquid Phase Equilibrium and Ion-Exchange Exploration for Aqueous Two-Phase Systems of ([C4mim]Cl + K2CO3 or K3C6H5O7 + water) at Different Temperatures

Journal of Solution Chemistry - Liquid–liquid equilibrium (LLE) data and phase diagrams for new aqueous two-phase systems (ATPSs) containing 1-butyl-3-methylimidazolium chloride...     

Partitioning of Dyes,Free Anthraquinones,and Tanshinones in Aqueous Two-Phase Systems of Cationic/Anionic Surfactants

The partition behaviors of some dyes, anthraquinones, and tanshiones in two kinds of aqueous two-phase systems (ATPSs) have been investigated. The partition constants (K) of ionic dyes and rhein in the first kind of ATPSs are dependent on hydrophobic and electrostatic interactions. A correlation for K as a function of the concentration ratio of total surfactant ions and surface net charge ratio of aggregates between the two coexisting phases has been proposed. Almost 100% of water-insoluble electroneutral extract accumulates in surfactant-rich phase of the first kind of ATPS due to hydrophobic interaction. K of emodin in the second kind of ATPSs is correlated by the same model regardless of electrostatic interaction.     

Effect of anionic structure on the phase formation and hydrophobicity of amino acid ionic liquids aqueous two-phase systems

Compared with the conventional ionic liquids, amino acid ionic liquids are more biodegradable and biocompatible, and can enhance stability of biomaterials. In this work, amino acid ionic liquids 1-butyl-3-methylimidazolium L-serine ([C(4)mim][Ser]), 1-butyl-3-methylimidazolium glycine ([C(4)mim][Gly]), 1-butyl-3-methylimidazolium L-alanine ([C(4)mim][Ala]) and 1-butyl-3-methylimidazolium L-leucine ([C(4)mim][Leu]) have been synthesized. These ionic liquids are found to form aqueous two-phase systems (ATPSs) by the salted-out of K(3)PO(4) in aqueous solutions. Phase diagram of the ATPSs and the Gibbs energies of transfer of methylene group from the bottom salt-rich phase to the top ionic liquid-rich phase have been determined at 298.15K and pH 14, and the effect of anionic structure of the ionic liquids on phase formation of the ATPSs and the relative hydrophobicity between the top and the bottom phases are then examined. In order to understand the effect of relative hydrophobicity of the phases in equilibrium in the ATPSs on the extraction/separation capability of biomolecules, the partition coefficients of cytochrome-c (as a model biomolecule) in the ATPSs are measured by spectrophotometry. It is suggested that hydrophobic interactions are mainly responsible for the higher partition coefficients of cytochrome-c in aqueous two-phase systems at pH 14, and the extraction and separation capacity of biomolecules can be improved by the modulation of the relative hydrophobicity of the phases and/or the pH of the system.     

Selective separation of protein and saccharides by ionic liquids aqueous two-phase systems

In the present work, it was found that aqueous solution of a hydrophilic ionic liquid (IL), 1-butyl-3-methylimidazolium dicyanamide ([C₄mim][N(CN)₂]), could be separated into an aqueous two-phase system (ATPS) by inorganic salts such as K₂HPO₄ and K₃PO₄. The top phase is IL-rich, while the bottom phase is phosphate-rich. It was shown that 82.7%–100% bovine serum albumin (BSA) could be enriched into the top phase and almost quantitative saccharides (arabinose, glucose, sucrose, raffinose or dextran) were preferentially extracted into the bottom phase in a single-step extraction by [C₄mim][N(CN)₂] + K₂HPO₄ ATPS. The extraction efficiency of BSA from the aqueous saccharide solutions was influenced by the molecular structure of saccharides. The conductivity, dynamic light scattering (DLS) and transmission electron microscopy (TEM) were combined to investigate the microstructure of the IL-rich top phase and the possible mechanism for the selective separation. It is suggested that the formation of the IL aggregate and the IL aggregate-BSA complex plays a significant role in the separation of BSA from aqueous saccharide solutions. This is the first example for the selective separation by ILs-based ATPSs. It is expected that these findings would have potential applications in bio-analysis, separation, and IL recycle.     

Preparation of a novel light-sensitive copolymer and its application in recycling aqueous two-phase systems

Aqueous two-phase systems (ATPSs) are potential bioseparation techniques in industry. However, a key problem is that aqueous two-phase systems could not be effectively recycled to result in high cost and environment pollution. Recently, how to prepare recycling copolymers forming aqueous two-phase systems is focused on in the area. In this study, a light-sensitive copolymer (P(NNC)) was synthesized by using N-isopropylacrylamide (NIPA), N-vinyl-2-pyrrolidone (NVP), chlorophyllin sodium copper salt (CHL) as monomers. The copolymer P(NNC) can form ATPSs with another novel pH-sensitive copolymer (P(ADB)) which was synthesized by co-worker in our laboratory. Over 98% of the P(NNC) copolymer could be recovered by using laser radiation at 488nm. The copolymer P(ADB) could be recovered by adjusting the isoelectric point (pI) to 4.1, with a recovery of 97%. Bovine serum albumin (BSA) and Tyr were partitioned in the P(NNC)-P(ADB) aqueous two-phase systems to examine the systems. It was found that partition coefficient of BSA and L-Tyr could reach 4.1 and 0.12 in the systems, respectively.     

Polyelectrolyte‐grafted carbon nanotubes: Synthesis,reversible phase‐transition behavior,and tribological properties as lubricant additives

A novel polyelectrolyte‐grafted multiwalled carbon nanotubes (MWCNTs‐g‐PILs) which possesses a hard backbone of MWCNTs and a soft shell of brush‐like poly (ionic liquids) (PILs) has been synthesized via the surface atom transfer radical polymerization (ATRP). Chemical structure and the grafted PILs quantities of MWCNTs‐g‐PILs were determined by FTIR, TGA, and XPS. TEM and FE‐SEM observations indicate that the nanotubes were coated with a PILs layer, exhibiting core‐shell nanostructures with the PILs chains as the brush‐like or hairy shell and the MWCNTs as the hard backbone. Furthermore, the effect of counter‐anions on the solubility of MWCNTs‐g‐PILs was investigated. The results indicate that relative solubility of MWCNTs‐g‐PILs in various solvents could be switched by anion exchange. This tunable solubility results in the formation of the cycle of reversible phase‐transition. Tribological property of MWCNTs‐g‐PILs as additives in base lubricant 1‐methyl‐3‐butylimidaaolium hexafluorophosphate (LP104) was evaluated using an Optimol SRV oscillating friction and wear tester, confirming that MWCNTs‐g‐PILs are the excellent antiwear and friction‐reducing additives, which can amend the tribological properties of base lubricant significantly. This is attributed to the good dispersibility and core‐shell structure of MWCNTs‐g‐PILs. These results reported in this work may open primarily toward constructing a bridge among carbon nanotues (CNTs), ILs, and lubricant additives and secondarily to prove that CNTs (modified CNTs) as lubricant additives are promising candidates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7225–7237, 2008     

Equilibrium phase behavior of aqueous two-phase systems containing 17R4/L64 and citrates

The cloud points (CPs) of the copolymers 17R4 and L64 were first measured, and then the effects of salts ((NH₄)₃C₆H₅O₇, K₃C₆H₅O₇) on 17R4 and L64 were researched. After finishing the work described above, the temperature (278.15, 283.15, and 288.15) K of aqueous two-phase systems was determined, which consist of 17R4-(NH₄)₃C₆H₅O₇, 17R4-K₃C₆H₅O₇, L64-(NH₄)₃C₆H₅O₇, and L64-K₃C₆H₅O₇. Finally, the liquid–liquid equilibrium (LLE) data of binodal curve and the tie line for 17R4-(NH₄)₃C₆H₅O₇ aqueous two- phase systems (ATPSs) 17R4-K₃C₆H₅O₇ ATPSs, L64-(NH₄)₃C₆H₅O₇ ATPSs, and L64-K₃C₆H₅O₇ ATPSs were obtained. Nonlinear fitting of the empirical equation was used for making the diagram. The results showed that the change in the size of the two-phase areas increases with the increase of temperature. The capacity of the salts to induce phase segregation follows the Hofmeister series, that is, K₃C₆H₅O₇?>?(NH₄)₃C₆H₅O₇. In addition, the findings also showed that the phase separation ability of 17R4 is better than that of L64.     

Coordinatively saturated cyclometallated Pt(IV) azobenzene complexes: synthesis and mesomorphic behaviour

The mesomorphic 4,4-bis[4-n-octyloxybenzoyloxy]azobenzene dinuclear chloro-bridged cycloplatinated complex [(Azo)Pt(mu;-Cl)]2 (smectic C between 263 and 342 C) has been reacted with different chelating ligands, giving rise to a family of square-planar ortho-platinated derivatives, [(Azo)Pt(L)] (L = tropolonate, 8-hydroxyquinolinate and 1,1,1,5,5,5-hexafluoro2,4-pentanedionate). Thermotropic mesomorphism is preserved for these mononuclear complexes which exhibit at least a nematic mesophase and transition temperatures lower by over 100° C than that of the corresponding dimeric precursor. Oxidative addition to the Pt(II) [(Azo)Pt(L)] species of electrophilic substrates such as I₂ or CH₃I eventually led to the corresponding octahedral [(Azo)Pt(L)(I)(X)] products. The introduction of two further ligands leads to Pt(IV) derivatives showing smectic and nematic mesophases for all L ligands. For the hexacoordinated [(Azo)Pt(L)(I)(CH₃)] complexes it has been verified that the oxidative addition of methyl iodide is a thermally reversible process, indicating that these species have potential applications as switchable systems.     

Correlations between distribution coefficients of various biomolecules in different polymer/polymer aqueous two-phase systems

Distribution coefficients for a variety of proteins and certain other biomolecules (peptides, amino acids, and carbohydrates) (overall 27 different solutes) were measured in aqueous two-phase systems (ATPSs) dextran (Dex)–polyethylene glycol (PEG) and Dex–Ucon 50-HB-5100 (Ucon—a random copolymer of ethylene glycol and propylene glycol) both containing 0.15 M NaCl in 0.01 M phosphate buffer, pH 7.4, at 23 °C. Distribution coefficients of some selected solutes were also measured in the above two-phase systems at three different polymer concentrations for each system. It was established that the distribution coefficients for all the proteins examined in the ATPSs are correlated according to the so-called Collander linear equation.     

Molecular solvent effect on the acidity constant of protic ionic liquids

In this work how the microscopic properties of a molecular solvent affect the chemical environment of the protic ionic liquids (PILs) was analyzed. Using Reichardt’s dye as indicator of acidity, new acidity constant values for eight PILs (pK_a^PILs) were determined by spectrophotometric titration. Modifying the character hydrogen bonding donor of the molecular solvent it is possible to handle the PIL acid strength. Thus, we can turn basic PILs into acidic ones thereby the molecular solvent could be used as ‘additive’ for PILs, which allowed us to tune PILs design.     

Pressurized liquid extraction with in-cell clean-up followed by gas chromatography-tandem mass spectrometry for the selective determination of parabens and triclosan in indoor dust

This work studied the possibility of using polyethyleimine (PEI) as an affinity ligand for the purification of plasmid DNA (pDNA) from alkaline lysates using aqueous two-phase systems (ATPSs). The goal was to find conditions under which this cationic polymer could steer the partition of pDNA to the phase where less impurities accumulate. In poly(ethylene glycol) (PEG)/ammonium sulphate systems, neither free nor PEGylated PEI (pPEI) were able to change the partition of pDNA. This is probably due to the high salt concentration present in these systems that impair the interaction between pDNA and PEI. In PEG 3350/dextran 110 systems, the desired effect could be observed but 0.2-0.5M ammonium sulphate had to be added to prevent the co-partition of RNA to the same phase. These results were used to develop a methodology to obtain polyplexes from alkaline lysates in a two-step ATPSs extraction process. In the first step, a PEG 600/ammonium sulphate system is used to remove most impurities to the top phase. The pDNA-containing bottom phase is then isolated and contacted with a second PEG 3350/dextran 110 system supplemented with a small amount of pPEI (0.2%). Plasmid yield was 100% and the final preparation had no RNA and only small amounts of contaminant protein. Additionally, pDNA was obtained in the form of 53nm-sized polyplexes which are likely to suit specific gene delivery applications.     

Protic ionic liquids: physicochemical properties and behavior as amphiphile self-assembly solvents

The physicochemical properties of 22 protic ionic liquids (PILs) and 6 protic molten salts, and the self-assembly behavior of 3 amphiphiles in the PILs, are reported. Structure-property relationships have been explored for the PILs, including the effect of increasing the substitution of ammonium cations and the presence of methoxy and hydroxyl moieties in the cation. Anion choices included the formate, pivalate, trifluoroacetate, nitrate, and hydrogen sulfate anions. This series of PILs had a diverse range of physicochemical properties, with ionic conductivities up to 51.10 mS/cm, viscosities down to 5.4 mPa.s, surface tensions between 38.3 and 82.1 mN/m, and densities between 0.990 and 1.558 g/cm3. PILs were designed with various levels of solvent cohesiveness, as quantified by the Gordon parameter. Fourteen PILs were found to promote the self-assembly of amphiphiles. High-throughput polarized optical microscopy was used to identify lamellar, hexagonal, and bicontinuous cubic amphiphile self-assembly phases. The presence and extent of amphiphile self-assembly have been discussed in terms of the Gordon parameter.     

Hydrogen-Bonding-Driven Ion-Pair Formation in Protic Ionic Liquid Aqueous Solution

Protic ionic liquids (PILs) in solution especially in water have attracted more and more attention due to their unique properties. The solvation of PILs in water is important to their properties and applications. To explore the solvation of bio-based PILs in water, acidity of 49 [AA]X amino acid ionic liquids (AAILs) consisting of 7 different cations and 7 different anions was studied as a favorable probe. The pK_a values for [AA]X PILs containing same cations were obtained and discussed. The acidity strength of the [AA]X PILs varies with both cation and anion which does not follow the conventional assumption that the acidity for PILs is independent of anions. The acidic discrepancy of [AA]X PILs aqueous solution is probably mediated by the formation of ion pairs according to a revised solvation model of PILs. Quantum-chemistry calculation was employed to unpuzzle anion's different effects on the acid balance of cations where cation-anion hydrogen bonds play an important role. Such difference in acidity allows us to understand the formation of solvated ion pairs. This work provides an insight into the fundamental solvation of PILs from acid perspective and their influence on acidity properties for the first time.     

Nanoparticle Size‐Fractionation through Self‐Standing Porous Covalent Organic Framework Films

Covalent organic frameworks (COFs) have attracted attention due to their ordered pores leading to important industrial applications like storage and separation. Combined with their modular synthesis and pore engineering, COFs could become ideal candidates for nanoseparations. However, the fabrication of these microcrystalline powders as continuous, crack‐free, robust films remains a challenge. Herein, we report a simple, slow annealing strategy to construct centimeter‐scale COF films ( Tp‐Azo and Tp‐TTA ) with micrometer thickness. The as‐synthesized films are porous (SA_BET=2033 m² g^?1 for Tp‐Azo ) and chemically stable. These COFs have distinct size cut‐offs (ca. 2.7 and ca. 1.6 nm for Tp‐Azo and Tp‐TTA , respectively), which allow the size‐selective separation of gold nanoparticles. Unlike, other conventional membranes, the durable structure of the COF films allow for excellent recyclability (up to 4 consecutive cycles) and easy recovery of the gold nanoparticles from the solution.