Bio-Inspired Polyanionic Electrolytes for Highly Stable Zinc-Ion Batteries

For zinc-ion batteries (ZIBs), the non-uniform Zn plating/stripping results in a high polarization and low Coulombic efficiency (CE), hindering the large-scale application of ZIBs. Here, inspired by biomass seaweed plants, an anionic polyelectrolyte alginate acid (SA) was used to initiate the in situ formation of the high-performance solid electrolyte interphase (SEI) layer on the Zn anode. Attribute to the anionic groups of −COO⁻, the affinity of Zn²⁺ ions to alginate acid induces a well-aligned accelerating channel for uniform plating. This SEI regulates the desolvation structure of Zn²⁺ and facilitates the formation of compact Zn (002) crystal planes. Even under high depth of discharge conditions (DOD), the SA-coated Zn anode still maintains a stable Zn stripping/plating behavior with a low potential difference (0.114 V). According to the classical nucleation theory, the nucleation energy for SA-coated Zn is 97 % less than that of bare Zn, resulting in a faster nucleation rate. The Zn||Cu cell assembled with the SA-coated electrode exhibits an outstanding average CE of 99.8 % over 1,400 cycles. The design is successfully demonstrated in pouch cells, where the SA-coated Zn exhibits capacity retention of 96.9 % compared to 59.1 % for bare Zn anode, even under the high cathode mass loading (>10 mg/cm²).     

Lithium Bis(oxalate)borate Additive for Self-repairing Zincophilic Solid Electrolyte Interphases towards Ultrahigh-rate and Ultra-stable Zinc Anodes

The artificial solid electrolyte interphase (SEI) plays a pivotal role in Zn anode stabilization but its long-term effectiveness at high rates is still challenged. Herein, to achieve superior long-life and high-rate Zn anode, an exquisite electrolyte additive, lithium bis(oxalate)borate (LiBOB), is proposed to in situ derive a highly Zn²⁺-conductive SEI and to dynamically patrol its cycling-initiated defects. Profiting from the as-constructed real-time, automatic SEI repairing mechanism, the Zn anode can be cycled with distinct reversibility over 1800 h at an ultrahigh current density of 50 mA cm⁻², presenting a record-high cumulative capacity up to 45 Ah cm⁻². The superiority of the formulated electrolyte is further demonstrated in the Zn||MnO₂ and Zn||NaV₃O₈ full batteries, even when tested under harsh conditions (limited Zn supply (N/P≈3), 2500 cycles). This work brings inspiration for developing fast-charging Zn batteries toward grid-scale storage of renewable energy sources.     

Synergistic Modulation of In-Situ Hybrid Interface Construction and pH Buffering Enabled Ultra-Stable Zinc Anode at High Current Density and Areal Capacity

In aqueous electrolytes, the uncontrollable interfacial evolution caused by a series of factors such as pH variation and unregulated Zn²⁺ diffusion would usually result in the rapid failure of metallic Zn anode. Considering the high correlation among various triggers that induce the anode deterioration, a synergistic modulation strategy based on electrolyte modification is developed. Benefitting from the unique pH buffer mechanism of the electrolyte additive and its capability to in situ construct a zincophilic solid interface, this synergistic effect can comprehensively manage the thermodynamic and kinetic properties of Zn anode by inhibiting the pH variation and parasitic side reactions, accelerating de-solvation of hydrated Zn²⁺, and regulating the diffusion behavior of Zn²⁺ to realize uniform Zn deposition. Thus, the modified Zn anode can achieve an impressive lifespan at ultra-high current density and areal capacity, operating stably for 609 and 209 hours at 20 mA cm⁻², 20 mAh cm⁻² and 40 mA cm⁻², 20 mAh cm⁻², respectively. Based on this exceptional performance, high loading Zn||NH₄V₄O₁₀ batteries can achieve excellent cycle stability and rate performance. Compared with those previously reported single pH buffer strategies, the synergistic modulation concept is expected to provide a new approach for highly stable Zn anode in aqueous zinc-ion batteries.     

Tetraphenylporphyrin-based Chelating Ligand Additive as a Molecular Sieving Interfacial Barrier toward Durable Aqueous Zinc Metal Batteries

The sustained water consumption and uncontrollable dendrite growth strongly hamper the practical applications of rechargeable zinc (Zn) metal batteries (ZMBs). Herein, for the first time, we demonstrate that trace amount of chelate ligand additive can serve as a “molecular sieve-like” interfacial barrier and achieve highly efficient Zn plating/stripping. As verified by theoretical modeling and experimental investigations, the benzenesulfonic acid groups on the additive molecular not only facilitates its water solubility and selective adsorption on the Zn anode, but also effectively accelerates the de-solvation kinetics of Zn²⁺. Meanwhile, the central porphyrin ring on the chelate ligand effectively expels free water molecules from Zn²⁺ via chemical binding against hydrogen evolution, and reversibly releases the captured Zn²⁺ to endow a dendrite-free Zn deposition. By virtue of this non-consumable additive, high average Zn plating/stripping efficiency of 99.7 % over 2100 cycles together with extended lifespan and suppressed water decomposition in the Zn||MnO₂ full battery were achieved, thus opening a new avenue for developing highly durable ZMBs.     

Amphoteric Cellulose-Based Double-Network Hydrogel Electrolyte Toward Ultra-Stable Zn Anode

Zinc (Zn) metal anode suffers from uncontrollable Zn dendrites and parasitic side reactions at the interface, which restrict the practical application of aqueous rechargeable zinc batteries (ARZBs). Herein, an amphoteric cellulose-based double-network is introduced as hydrogel electrolyte to overcome these obstacles. On one hand, the amphoteric groups build anion/cation transport channels to regulate electro-deposition behavior on Zn (002) crystal plane enabled by homogenizing Zn²⁺ ions flux. On the other hand, the strong bonding between negatively charged carboxyl groups and Zn²⁺ ions promote the desolvation process of [Zn(H₂O)₆]²⁺ to eliminate side reactions. Based on the above two functions, the hydrogel electrolyte enables an ultra-stable cycling with a cumulative capacity of 7 Ah cm⁻² at 20 mA cm⁻²/20 mAh cm⁻² for Zn||Zn cell. This work provides significant concepts for developing hydrogel electrolytes to realize stable anode for high-performance ARZBs.     

Catalytic Chemistry Derived Artificial Solid Electrolyte Interphase for Stable Lithium Metal Anodes Working at 20 mA cm−2 and 20 mAh cm−2

A stable solid electrolyte interphase (SEI) layer is crucial for lithium metal anode (LMA) to survive in long-term cycling. However, chaotic structures and chemical inhomogeneity of natural SEI make LMA suffering from exasperating dendrite growth and severe electrode pulverization, which hinder the practical application of LMAs. Here, we design a catalyst-derived artificial SEI layer with an ordered polyamide-lithium hydroxide (PA-LiOH) bi-phase structure to modulate ion transport and enable dendrite-free Li deposition. The PA-LiOH layer can substantially suppress the volume changes of LMA during Li plating/stripping cycles, as well as alleviate the parasitic reactions between LMA and electrolyte. The optimized LMAs demonstrate excellent stability in Li plating/stripping cycles for over 1000 hours at an ultra-high current density of 20 mA cm⁻² in Li||Li symmetric cells. A high coulombic efficiency up to 99.2 % in Li half cells in additive-free electrolytes is achieved even after 500 cycles at a current density of 1 mA cm⁻² with a capacity of 1 mAh cm⁻².     

Dynamic Zn/Electrolyte Interphase and Enhanced Cation Transfer of Sol Electrolyte for All-Climate Aqueous Zinc Metal Batteries

Zn metal as one of the promising anodes of aqueous batteries possesses notable advantages, but it faces severe challenges from severe side reactions and notorious dendrite growth. Here, ultrathin nanosheets of α-zirconium phosphate (ZrP) are explored as an electrolyte additive. The nanosheets not only create a dynamic and reversible interphase on Zn but also promote the Zn²⁺ transportation in the electrolyte, especially in the outer Helmholtz plane near ZrP. Benefited from the enhanced kinetics and dynamic interphase, the pouch cells of Zn||LiMn₂O₄ using this electrolyte remarkably improve electrochemical performance under harsh conditions, i.e. Zn powders as the Zn anode, high mass loading, and wide temperatures. The results expand the materials available for this dynamic interphase, provide an insightful understanding of the enhanced charge transfer in the electrolyte, and realize the combination of dynamic interphase and enhanced kinetics for all-climate performance.     

ZnF2-Riched Inorganic/Organic Hybrid SEI: in situ-Chemical Construction and Performance-Improving Mechanism for Aqueous Zinc-ion Batteries

Uncontrolled dendrites growth and serious parasitic reactions in aqueous electrolytes, greatly hinder the practical application of aqueous zinc-ion battery. On the basis of in situ-chemical construction and performance-improving mechanism, multifunctional fluoroethylene carbonate (FEC) is introduced into aqueous electrolyte to construct a high-quality and ZnF₂-riched inorganic/organic hybrid SEI (ZHS) layer on Zn metal anode (ZMA) surface. Notably, FEC additive can regulate the solvated structure of Zn²⁺ to reduce H₂O molecules reactivity. Additionally, the ZHS layer with strong Zn²⁺ affinity can avoid dendrites formation and hinder the direct contact between the electrolyte and anode. Therefore, the dendrites growth, Zn corrosion, and H₂ evolution reaction on ZMA in FEC-included ZnSO₄ electrolyte are highly suppressed. Thus, ZMA in such electrolyte realize a long cycle life over 1000 h and deliver a stable coulombic efficiency of 99.1 % after 500 cycles.     

Hydrophobic Organic-Electrolyte-Protected Zinc Anodes for Aqueous Zinc Batteries

Aqueous Zn batteries are promising energy-storage devices. However, their lifespan is limited by irreversible Zn anodes owing to water decomposition and Zn dendrite growth. Here, we separate aqueous electrolyte from Zn anode by coating a thin MOF layer on anode and filling the pores of MOF with hydrophobic Zn(TFSI)₂-tris(2,2,2-trifluoroethyl)phosphate (TFEP) organic electrolyte that is immiscible with aqueous Zn(TFSI)₂–H₂O bulk electrolyte. The MOF encapsulated Zn(TFSI)₂-TFEP forms a ZnF₂-Zn₃(PO₄)₂ solid electrolyte interphase (SEI) preventing Zn dendrite and water decomposition. The Zn(TFSI)₂-TFEP@MOF electrolyte protected Zn anode enables a Zn||Ti cell to achieve a high average Coulombic efficiency of 99.1 % for 350 cycles. The highly reversible Zn anode brings a high energy density of 210 Wh kg⁻¹ (of cathode and anode mass) and a low capacity decay rate of 0.0047 % per cycle over 600 cycles in a Zn||MnO₂ full cell with a low capacity ratio of Zn:MnO₂ at 2:1.     

Zincophilic Interfacial Manipulation against Dendrite Growth and Side Reactions for Stable Zn Metal Anodes

Constructing multifunctional interphases to suppress the rampant Zn dendrite growth and detrimental side reactions is crucial for Zn anodes. Herein, a phytic acid (PA)-ZnAl coordination compound is demonstrated as a versatile interphase layer to stabilize Zn anodes. The zincophilic PA-ZnAl layer can manipulate Zn²⁺ flux and promote rapid desolvation kinetics, ensuring the uniform Zn deposition with dendrite-free morphology. Moreover, the robust PA-ZnAl protective layer can effectively inhibit the hydrogen evolution reaction and formation of byproducts, further contributing to the reversible Zn plating/stripping with high Coulombic efficiency. As a result, the Zn@PA-ZnAl electrode shows a lower Zn nucleation overpotential and higher Zn²⁺ transference number compared with bare Zn. The Zn@PA-ZnAl symmetric cell exhibits a prolonged lifespan of 650 h tested at 5 mA cm⁻² and 5 mAh cm⁻². Furthermore, the assembled Zn battery full cell based on this Zn@PA-ZnAl anode also delivers decent cycling stability even under harsh conditions.     

Electrical-Conductive/Insulating Bi-Functional Layers for Stable Zn Metal Anode

Zinc-ion batteries are regarded as an extremely promising candidate for large-scale energy storage equipment due to the inexpensive ingredients and high safety. However, dendrite growth and side reactions occur in the Zn anode, which lead to exceedingly low coulombic efficiency (CE) and poor cycling stability. In this work, we propose a strategy of a conductive/insulating bi-functional coating layer (CIBL) for stable Zn metal anodes. Porous Ag nanowires (NWs) coating as a conductive layer effectively reduces the nuclear barrier and contains Zn²⁺ deposition in a certain space. Polyimide (PI) coatings as insulating layer implement a shunting effect on Zn²⁺, which could reduce the differential concentration on the Zn surface and induce uniform deposition of Zn²⁺. Therefore, the CIBL−Zn//CIBL−Zn battery achieves stable plating/stripping of over 1300 h at 1 mA cm⁻². The CE of CIBL−Zn//CIBL−Zn battery maintains at 99.2 % even after 1000 cycles. Moreover, the CIBL−Zn//V₂O₅ battery exhibits a capacity of nearly 289.2 mA h g⁻¹ at 5 A g⁻¹ after 3000 cycles and no sign of capacity degradation is found, which further demonstrate the feasibility of this strategy in practical application.     

Triple-function Hydrated Eutectic Electrolyte for Enhanced Aqueous Zinc Batteries

Aqueous rechargeable zinc-ion batteries (ARZBs) are impeded by the mutual problems of unstable cathode, electrolyte parasitic reactions, and dendritic growth of zinc (Zn) anode. Herein, a triple-functional strategy by introducing the tetramethylene sulfone (TMS) to form a hydrated eutectic electrolyte is reported to ameliorate these issues. The activity of H₂O is inhibited by reconstructing hydrogen bonds due to the strong interaction between TMS and H₂O. Meanwhile, the preferentially adsorbed TMS on the Zn surface increases the thickness of double electric layer (EDL) structure, which provides a shielding buffer layer to suppress dendrite growth. Interestingly, TMS modulates the primary solvation shell of Zn²⁺ ultimately to achieve a novel solvent co-intercalation ((Zn-TMS)²⁺) mechanism, and the intercalated TMS works as a “pillar” that provides more zincophilic sites and stabilizes the structure of cathode (NH₄V₄O₁₀, (NVO)). Consequently, the Zn||NVO battery exhibits a remarkably high specific capacity of 515.6 mAh g⁻¹ at a low current density of 0.2 A g⁻¹ for over 40 days. This multi-functional electrolytes and solvent co-intercalation mechanism will significantly propel the practical development of aqueous batteries.     

Boosting Zn Anode Utilization by Trace Iodine Ions in Organic-Water Hybrid Electrolytes through Formation of Anion-rich Adsorbing Layers

Aqueous Zn batteries are attracting extensive attentions, but their application is still hindered by H₂O-induced Zn-corrosion and hydrogen evolution reactions. Addition of organic solvents into aqueous electrolytes to limit the H₂O activity is a promising solution, but at the cost of greatly reduced Zn anode kinetics. Here we propose a simple strategy for this challenge by adding 50 mM iodine ions into an organic-water (1,2-dimethoxyethane (DME)+water) hybrid electrolyte, which enables the electrolyte simultaneously owns the advantages of low H₂O activity and accelerated Zn kinetics. We demonstrate that the DME breaks the H₂O hydrogen-bond network and exclude H₂O from Zn²⁺ solvation shell. And the I⁻ is firmly adsorbed on the Zn anode, reducing the Zn²⁺ de-solvation barrier from 74.33 kJ mol⁻¹ to 32.26 kJ mol⁻¹ and inducing homogeneous nucleation behavior. With such electrolyte, the Zn//Zn symmetric cell exhibits a record high cycling lifetime (14.5 months) and achieves high Zn anode utilization (75.5 %). In particular, the Zn//VS₂@SS full cell with the optimized electrolyte stably cycles for 170 cycles at a low N : P ratio (3.64). Even with the cathode mass-loading of 16.7 mg cm⁻², the full cell maintains the areal capacity of 0.96 mAh cm⁻² after 1600 cycles.     

Modulating Cation Migration and Deposition with Xylitol Additive and Oriented Reconstruction of Hydrogen Bonds for Stable Zinc Anodes

Highly reversible plating/stripping in aqueous electrolytes is one of the critical processes determining the performance of Zn-ion batteries, but it is severely impeded by the parasitic side reaction and dendrite growth. Herein, a novel electrolyte engineering strategy is first proposed based on the usage of 100 mM xylitol additive, which inhibits hydrogen evolution reaction and accelerates cations migration by expelling active H₂O molecules and weakening electrostatic interaction through oriented reconstruction of hydrogen bonds. Concomitantly, xylitol molecules are preferentially adsorbed by Zn surface, which provides a shielding buffer layer to retard the sedimentation and suppress the planar diffusion of Zn²⁺ ions. Zn²⁺ transference number and cycling lifespan of Zn ∥ Zn cells have been significantly elevated, overwhelmingly larger than bare ZnSO₄. The cell coupled with a NaV₃O₈ cathode still behaves much better than the additive-free device in terms of capacity retention.     

Manipulating Electric Double Layer Adsorption for Stable Solid-Electrolyte Interphase in 2.3 Ah Zn-Pouch Cells

Constructing a reliable solid-electrolyte interphase (SEI) is imperative for enabling highly reversible zinc metal (Zn⁰) electrodes. Contrary to conventional “bulk solvation” mechanism, we found the SEI structure is dominated by electric double layer (EDL) adsorption. We manipulate the EDL adsorption and Zn²⁺ solvation with ether additives (i.e. 15-crown-5, 12-crown-4, and triglyme). The 12-crown-4 with medium adsorption on EDL leads to a layer-structured SEI with inner inorganic ZnF_x/ZnS_x and outer organic C−O−C components. This structure endows SEI with high rigidness and strong toughness enabling the 100 cm² Zn||Zn pouch cell to exhibit a cumulative capacity of 4250 mAh cm⁻² at areal-capacity of 10 mAh cm⁻². More importantly, a 2.3 Ah Zn||Zn_0.25V₂O₅⋅n H₂O pouch cell delivers a recorded energy density of 104 Wh L_cell⁻¹ and runs for >70 days under the harsh conditions of low negative/positive electrode ratio (2.2 : 1), lean electrolyte (8 g Ah⁻¹), and high-areal-capacity (≈13 mAh cm⁻²).     

Rapidly Synthesized Single-Ion Conductive Hydrogel Electrolyte for High-Performance Quasi-Solid-State Zinc-ion Batteries

Single-ion conductive electrolytes can largely eliminate electrode polarization, reduce the proportion of anion migration and inhibit side reactions in batteries. However, they usually suffer from insufficient ion conductivity due to the strong interaction between cations and cationic receptors. Here we report an ultrafast light-responsive covalent organic frameworks (COF) with sulfonic acid groups modification as the acrylamide polymerization initiator. Benefiting from the reduced electrostatic interaction between Zn²⁺ and sulfonic acid groups through solvation effects, the as-prepared COF-based hydrogel electrolyte (TCOF-S-Gel) receives an ion conductivity of up to 27.2 mS/cm and Zn²⁺ transference number of up to 0.89. In addition, sufficient hydrogen bonds endow the single-ion conductive TCOF-S-Gel electrolyte to have good water retention and superb mechanical properties. The assembled Zn||TCOF-S-Gel||MnO₂ full zinc-ion battery exhibits high discharge capacity (248 mAh/g at 1C), excellent rate capability (90 mAh/g at 10C) and superior cycling performance. These enviable results enlist the instantaneously photocured TCOF-S-Gel electrolyte to be qualified to large-scaled flexible high-performance quasi-solid-state zinc-ion batteries.     

Zinc–Organic Battery with a Wide Operation-Temperature Window from −70 to 150 °C

Aqueous zinc (Zn) batteries have been considered as promising candidates for grid-scale energy storage. However, their cycle stability is generally limited by the structure collapse of cathode materials and dendrite formation coupled with undesired hydrogen evolution on the Zn anode. Herein we propose a zinc–organic battery with a phenanthrenequinone macrocyclic trimer (PQ-MCT) cathode, a zinc-foil anode, and a non-aqueous electrolyte of a N,N-dimethylformamide (DMF) solution containing Zn²⁺. The non-aqueous nature of the system and the formation of a Zn²⁺–DMF complex can efficiently eliminate undesired hydrogen evolution and dendrite growth on the Zn anode, respectively. Furthermore, the organic cathode can store Zn²⁺ ions through a reversible coordination reaction with fast kinetics. Therefore, this battery can be cycled 20 000 times with negligible capacity fading. Surprisingly, this battery can even be operated in a wide temperature range from −70 to 150 °C.     

Non-concentrated aqueous electrolytes with organic solvent additives for stable zinc batteries

Rechargeable aqueous zinc batteries (RAZBs) are promising for large-scale energy storage because of their superiority in addressing cost and safety concerns. However, their practical realization is hampered by issues including dendrite growth, poor reversibility and low coulombic efficiency (CE) of Zn anodes due to parasitic reactions. Here, we report a non-concentrated aqueous electrolyte composed of 2 m zinc trifluoromethanesulfonate (Zn(OTf)₂) and the organic dimethyl carbonate (DMC) additive to stabilize the Zn electrochemistry. Unlike the case in conventional aqueous electrolytes featuring typical Zn[H₂O]₆²⁺ solvation, a solvation sheath of Zn²⁺ with the co-participation of the DMC solvent and OTf⁻ anion is found in the formulated H₂O + DMC electrolyte, which contributes to the formation of a robust ZnF₂ and ZnCO₃-rich interphase on Zn. The resultant Zn anode exhibits a high average CE of Zn plating/stripping (99.8% at an areal capacity of 2.5 mA h cm⁻²) and dendrite-free cycling over 1000 cycles. Furthermore, the H₂O + DMC electrolytes sustain stable operation of RAZBs pairing Zn anodes with diverse cathode materials such as vanadium pentoxide, manganese dioxide, and zinc hexacyanoferrate. Rational electrolyte design with organic solvent additives would promote building better aqueous batteries.

Involvement of dimethyl carbonate and trifluoromethanesulfonate anions in a hybrid aqueous electrolyte enables the formation of a new Zn²⁺-solvation structure and a ZnF₂–ZnCO₃-rich interphase that stabilizes the Zn battery chemistry.     

Surface-tuned two-dimension MXene scaffold for highly reversible zinc metal anode

Zinc metal has aroused increasing interest as anode material of Zn-based batteries for their energy storage application. However, the uneven Zn stripping/plating processes induce severe dendrite growth, leading to low Coulombic efficiency and safety hazards. Herein, a surface-tuned two-dimensional (2D) MXene Ti₃C₂T_x scaffold as a robust skeleton is developed to facilitate the uniform Zn stripping/plating. The Ti₃C₂T_x with high electrical conductivity and unique structure provides fast ionic-transport paths, promising even Zn²⁺ stripping/plating processes. With suppressed Zn dendrite growth and uniform nucleation, the proposed 2D Ti₃C₂T_x scaffold for Zn metal anode delivers a low voltage hysteresis of 63 mV and long lifespan over 280 h. This surface-tuned engineering strategy demonstrates the potential application of Zn anode with MXene skeleton for next-generation Zn-based batteries.