Polymerization of diphenylacetylenes having very bulky silyl groups and polymer properties

Polymerization and polymer properties of 1-phenyl-2-[4-(triphenylsilyl)phenyl]acetylene (pPh₃SiDPA) and 1-phenyl-2-[4-(triisopropylsilyl)phenyl]acetylene (piPr₃SiDPA), which have very bulky silyl groups, were examined. These monomers polymerized in good yields in the presence of TaCl₅-based catalysts. The highest weight-average molecular weights of poly(pPh₃SiDPA) and poly(piPr₃SiDPA) reached about 1 × 10⁶ and 4.8 × 10⁶, respectively. The polymers were yellow to orange-colored solids which were soluble in toluene, chloroform, etc., and provided free-standing films by solution casting. The onset temperatures of weight loss of poly(pPh₃SiDPA) and poly(piPr₃SiDPA) in TGA in air were 430 and 270°C, respectively. The oxygen permeability coefficients of poly(pPh₃SiDPA) and poly(piPr₃SiDPA) at 25°C were 3.8 and 20 barrers, respectively, and relatively small. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2721–2725, 1998     

Electrophilic substitution of organosilicon compounds. II. Synthesis of allyl-terminated polyisobutylenes by quantitative allylation of tert-chloro-polyisobutylenes with allyltrimethylsilane

Essentially quantitative allylation of linear and three-arm star tert-chloro capped polyisobutylenes [^tCl–PIB–Cl^t and PIB(Cl^t)₃] has been achieved by the use of allyltrimethylsilane (AllylSiMe₃) and Friedel–Crafts acids. Quantitative allylation occurs under suitable conditions, e.g., slight molar excess of TiCl₄ and AllySiMe₃ polar media, ?70°C. These conditions have been developed from quantitative model allylation experiments using 2,4,4-trimethyl-2-chloropentane. Essentially quantitative allylation occurs with long-chain or “once fired” tert-chloro-end groups. Complete allylation can also be effected in a “one-pot two-step” synthesis, i.e., by first preparing the tert-chloro-ended PIB by the inifer method and without isolating the product, completing the synthesis by allylation in the same reactor. Extensive but not quantitative allylation can also be obtained in situ, i. e., during polymerization, by the use of the AllylSiMe₃/cumyl chloride/BCI₃/isobutylene combination. While allylation proceeds with great ease under the mildest conditions, e.g., ?70°C, vinylation with vinyltrimethylsilane could not be achieved even under more forcing conditions.     

Die Reaktion von Ph3AsCl2 mit Acetonitril. Kristallstrukturen von [Ph3AsNC(Me)C(AsPh3)CN]+Cl– und des Palladium‐Molekülkomplexes [Ph3AsNC(Me)C(AsPh3)CN–PdCl3]

The Reaction of Ph₃AsCl₂ with Acetonitrile. Crystal Structures of [Ph₃AsNC(Me)C(AsPh₃)CN]⁺Cl^– and of the Palladium Molecular Complex [Ph₃AsNC(Me)C(AsPh₃)CN–PdCl₃] In the presence of potassium hydride the reaction of Ph₃AsCl₂ with acetonitrile leads to [Ph₃AsNC(Me) · C(AsPh₃)CN]⁺Cl^– ( 1 ), which is characterized by its infrared spectrum and by a crystal structure analysis. 1 can be explained as an insertion reaction of acetonitrile into an ylidic As–C bond of the primarily formed [(Ph₃As)₂CCN]Cl. 1 : Space group P1, Z = 2, lattice dimensions at –70 °C: a = 991.9(1), b = 1255.2(1), c = 1381.3(1) pm, α = 81.64(1)°, β = 80.12(1)°, γ = 78.17(1)°; R₁ = 0.051. 1 reacts with palladium(II) chloride to give the molecular complex [Ph₃AsNC(Me)C(AsPh₃)CN–PdCl₃] ( 2 ) with zwitterionic structure. The fragment {PdCl₃^–} is terminally bonded at the nitrogen atom of the CCN group of the cation of 1 in a linear arrangement CCNPd. 2 · CH₃CN: Space group P2₁, Z = 2, lattice dimensions at –90 °C: a = 1079.2(1), b = 1261.5(1), c = 1560.9(1) pm; β = 110.20(1)°; R₁ = 0.0283.     

Anionic Polymerization Behavior of α-Methylene-N-methylpyrrolidone

Anionic polymerization of α-methylene-N-methylpyrrolidone ( MMP ) was carried out in THF at −78∼0 °C with diphenylmethylpotassium (Ph₂CHK) and with diphenylmethyllithium (Ph₂CHLi) in the presence of Lewis acidic diethylzinc (Et₂Zn). Poly( MMP )s possessing predicted molecular weights based on the molar ratios between monomer and initiators and narrow molecular weight distributions (M_w/M_n < 1.1) were obtained in quantitative yields. It was demonstrated that the propagating chain end of poly( MMP ) was stable at −30 °C to form the polymers with well-defined chain structures. From the polymerizations at the various temperatures ranging from −50 to −30 °C, the apparent rate constant and the activation energy of the polymerization were estimated as follows: ln k = −6.93 × 10³/T + 25.7 and 57 ± 5 kJ mol⁻¹, respectively.     

Synthesis and polymerization of new self‐polymerizable quinoxaline monomers

Extended self‐polymerizable poly(phenylquinoxaline) monomer mixtures {i.e.,2‐[4‐(4‐hydroxyphenoxy)phenyl]‐3‐phenyl‐6‐chloroquinoxaline and 3‐[4‐(4‐hydroxy phenoxy)phenyl]‐2‐phenyl‐6‐chloroquinoxaline, 2‐[4‐(4‐hydroxyphenoxy)phenyl]‐3‐phenyl‐6‐fluoroquinoxaline and 3‐[4‐(4‐hydroxyphenoxy)phenyl]‐2‐phenyl‐6‐fluoroquinoxaline, and 2‐(4‐fluorophenyl)‐3‐phenyl‐6‐(4‐hydroxyphenoxy)quinoxaline and 3‐(4‐fluorophenyl)‐2‐phenyl‐6‐(4‐hydroxyphenoxy)quinoxaline} more flexible and nucleophilic than a previously reported monomer mixture [i.e., 3‐(4‐hydroxyphenyl)‐2‐phenyl‐6‐fluoroquinoxaline and 2‐(4‐hydroxyphenyl)‐3‐phenyl‐6‐fluoroquinoxaline] were synthesized. The monomer mixtures were then polymerized into high‐molecular‐weight polymers. A sample was obtained, through a chlorine displacement reaction, that was a semicrystalline polymer with an intrinsic viscosity of 1.11 dL/g in m‐cresol at 30 ± 0.1 °C and two melting temperatures at 339 and 377 °C in the first differential scanning calorimetry scan. There was a melting temperature at 328 °C without a detectable glass‐transition temperature (T_g) when the sample was subjected to a second differential scanning calorimetry scan. The samples from fluorine displacement reactions were completely amorphous polymers. They had intrinsic viscosities of 0.53–0.90 dL/g in m‐cresol at 30 ± 0.1 °C and T_g's of 220–224 °C. The polymer samples from fluorine displacement reactions were evaluated with gel permeation chromatography and matrix‐assisted laser desorption/ionization time‐of‐flight analyses, which monitored the existence of certain amounts of cyclic oligomers. The thin films of the polymers had room‐temperature tensile strengths of 97–113 MPa, room‐temperature Young's moduli of 2.30–2.35 GPa, and room‐temperature elongations at break of 40–150%. The melt viscosity decreased from 10⁷ to less than 10⁴ Pa s at 310 °C as the frequency was increased from 10^?2 to 10² rad/s. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 78–91, 2005     

The Phase Diagram of the System [Ph4P]Br/BiBr3. Synthesis,Crystal Structure,Thermal Behaviour,and Vibrational Spectra of [Ph4P]3[Bi2Br9] · CH3COCH3 and two Modifications of [Ph4P]4[Bi6Br22]

The phase diagram of the system [Ph₄P]Br/BiBr₃ was investigated with the aid of DSC, TG and temperature dependent X‐ray powder diffraction measurements. By varying the reaction conditions, stoichiometry and crystallisation conditions of the reaction between BiBr₃ and [Ph₄P]Br four polynuclear bromobismuthates are formed. We report here the crystal structure of the solvation product [Ph₄P]₃[Bi₂Br₉] · CH₃COCH₃, which crystallises with monoclinic symmetry in the S. G. P2₁/n No. 14, a = 12.341(1), b = 32.005(3), c = 19.929(3) Å, β = 99.75(2)°, V = 7758(7) ų, Z = 4 and the crystal structures of two modifications of the compound [Ph₄P]₄[Bi₆Br₂₂]. The α‐form, crystallises with triclinic symmetry in the S. G. P1 No. 2, a = 13.507(4) Å, b = 14.434(4) Å, c = 17.709(5) Å, α = 81.34(2)°, β = 72.42(2)°, γ = 72.53(2)°, V = 3132.7(1) ų, Z = 2. The high‐temperature β‐form, crystallises with triclinic symmetry in the S. G. P1 No. 2, a = 13.893(4) Å, b = 14.267(3) Å, c = 16.580(3), α = 100.13(2)°, β = 96.56(2)°, γ = 110.01(2)°, V = 2985.5(1) ų, Z = 2. Lattice parameters of [Ph₄P]₄[Bi₈Br₂₈] are also given. The thermal behaviour of the compounds and in addition the vibrational spectra of [Ph₄P]₃[Bi₂Br₉] · CH₃COCH₃ are presented and discussed.     

Darstellung,Schwingungsspektren und Normalkoordinatenanalyse von mer-[OsCl3I(NCS)]2− sowie Kristallstrukturanalyse von zwei Modifikationen des mer-(Ph4As)2[OsCl3I(NCS)2c]

Preparation, Vibrational Spectra, and Normal Cooordinate Analysis of mer-[OsCl₃I(NCS)₂^c]^2? and Crystal Structures of two Modifications of mer-(Ph₄As)₂[OsCl₃I(NCS)₂^c] By treatment of cis-/trans-[OsCl₄I₂]^2? or fac-[OsCl₃I₃]^2? with (SCN)₂ in dichloromethane mixtures of different linkage isomers are formed, from which mer-[OsCl₃I(NCS)]^2? has been isolated by ion exchange chromatography on diethylaminoethyl cellulose. With tetraphenylarsonium ions mer-(Ph₄As)₂[OsCl₃I(NCS)₂^c] crystallizes in two different modifications. From acetone solution the high-temperature form α precipitates above ?10°C, the low-temperature form β below, ?65°C. The X-Ray structure determinations on single crystals of α-mer-(Ph₄As)₂[OsCl₃I(NCS)₂^c] (triclinic, space group P 1 , a = 10.245(5), b = 11.690(5), c = 22.027(5) Å, α = 83.650(5)°, β = 85.734(5)°, γ = 72.566(5)°, Z = 2) and β-mer-(Ph₄As)₂[OsCl₃I(NCS)₂^c] (triclinic, space group P 1 , a = 10.959(5), b = 11.122(5), c = 21.745(5) Å, α = 97.677(5)°, β = 92.339(5)°, γ = 104.712(5)°, Z = 2) reveal the ordering of the complex anions, which significantly differ in their geometry. The via N coordinated thiocyanate groups exhibit Os? N? C angles of 172.7° and 173.3° (α) and of 164.4° and 175.4° (β). Using the molecular parameters of the X-Ray determinations the low temperature (10 K) IR and Raman spectra of the (n-Bu₄N) salt of the complex anion are assigned by a normal coordinate analysis based on a modified valence force field. The valence force constants are f_d(OsN) = 1.66 and 1.64 mdyn/Å. Taking into account the trans influence a good agreement between observed and calculated frequencies is achieved.     

Synthesis and Thermal Behaviour of Compounds in the System [Ph4P]Cl/BiCl3 and the Crystal Structures of [Ph4P]3[Bi2Cl9] · 2 CH2Cl2 and [Ph4P]2[Bi2Cl8] · 2 CH3COCH3

Six polynuclear chlorobismuthates are formed in the reaction between BiCl₃ and Ph₄PCl by variation of the molar ratio of the educts, the solvents and the crystallisation methods: [Ph₄P]₃[Bi₂Cl₉] · 2 CH₂Cl₂, [Ph₄P]₃[Bi₂Cl₉] · CH₃COCH₃, [Ph₄P]₂[Bi₂Cl₈] · 2 CH₃COCH₃, [Ph₄P]₄[Bi₄Cl₁₆] · 3 CH₃CN, [Ph₄P]₄[Bi₆Cl₂₂], and [Ph₄P]₄[Bi₈Cl₂₈]. We report the crystal structure of [Ph₄P]₃[Bi₂Cl₉] · 2 CH₂Cl₂ which crystallises with triclinic symmetry in the S. G. P1 No. 2, with the lattice parameters a = 13.080(3) Å, b = 14.369(3) Å, c = 21.397(4) Å, α = 96.83(1)°, β = 95.96(1)°, γ = 95.94(2)°, V = 3943.9(1) ų, Z = 2. The anion is formed from two face‐sharing BiCl₆‐octahedra. [Ph₄P]₂[Bi₂Cl₈] · 2 CH₃COCH₃ crystallises with monoclinic symmetry in the S. G. P2₁/n, No. 14, with the lattice parameters a = 14.045(5) Å, b = 12.921(4) Å, c = 17.098(3) Å, β = 111.10(2)°, V = 2894.8(2) ų, Z = 2. The anion is a bi‐octahedron of two square‐pyramids, joined by a common edge. The octahedral coordination is achieved with two acetone ligands. [Ph₄P]₄[Bi₄Cl₁₆] · 3 CH₃CN crystallises in the triclinic S. G., P1, No. 2, with the lattice parameters a = 14.245(9) Å, b = 17.318(6) Å, c = 24.475(8) Å, α = 104.66(3)°, β = 95.93(3)°, γ = 106.90(4)°, V = 5486(4) ų, Z = 2. Two Bi₂Cl₈ dimers in syn‐position form the cubic anion. Lattice parameters of [Ph₄P]₃[Bi₂Cl₉] · CH₃COCH₃ are also given. The solvated compounds are desolvated at approximately 100 °C. [Ph₄P]₃[Bi₂Cl₉] · 2 CH₂Cl₂ and [Ph₄P]₃[Bi₂Cl₉] · CH₃COCH₃ show the same sequence of phase transitions after desolvation. All compounds melt into a liquid in which some order is observed and transform on cooling into the glassy state.     

Synthesis of the One-dimensional Compound (Ph4P)[In(P2Se6)] in a Ph4P+-Containing Selenophosphate Flux,and Structure of [In(P2Se6)2]5– – a Discrete Molecular Fragment of the [In(P2Se6)]nn– Chain

The reaction of one equivalent of In with a molten flux of (Ph₄P)₂Se₅ and P₂Se₅ (1 : 2), at 250 °C gave the (Ph₄P)[In(P₂Se₆)] ( I ). Stoichiometric elemental synthesis at 750 °C produced the Cs₅In(P₂Se₆)₂ ( II ). The thin, yellow crystals of ( I ), and the irregular, dark orange crystals of ( II ), appear to be air- and water-stable. Compound ( I ) crystallizes in the monoclinic space group C2/c (no. 15) and at 23 °C: a = 23.127(7) Å, b = 6.564(1) Å, c = 19.083(3) Å, β = 97.42(2)°, V = 2873(1) ų, Z = 4, final R/R_w = 4.4/5.2%. Compound ( II ) crystallizes in the tetragonal space group P4₂/m (no. 84) and at 23 °C: a = b = 13.886(1) Å, c = 7.597(2) Å, V = 1464.9(3) ų, Z = 2, final R/R_w = 3.9/5.1%. Compound ( I ) contains infinite [In(P₂Se₆)]_n^n– with a structure related to that of K₂FeP₂Se₆. Compound ( II ) contains the discrete [In(P₂Se₆)₂]^5– which can be viewed as a fragment of the [In(P₂Se₆)]_n^n– chain.     

Highly Stereoselective β‐Mannopyranosylation via the 1‐α‐Glycosyloxy‐isochromenylium‐4‐gold(I) Intermediates

While the gold(I)‐catalyzed glycosylation reaction with 4,6‐O‐benzylidene tethered mannosyl ortho‐alkynylbenzoates as donors falls squarely into the category of the Crich‐type β‐selective mannosylation when Ph₃PAuOTf is used as the catalyst, in that the mannosyl α‐triflates are invoked, replacement of the ^?OTf in the gold(I) complex with less nucleophilic counter anions (i.e., ^?NTf₂, ^?SbF₆, ^?BF₄, and ^?BAr₄^F) leads to complete loss of β‐selectivity with the mannosyl ortho‐alkynylbenzoate β‐donors. Nevertheless, with the α‐donors, the mannosylation reactions under the catalysis of Ph₃PAuBAr₄^F (BAr₄^F=tetrakis[3,5‐bis(trifluoromethyl)phenyl]borate) are especially highly β‐selective and accommodate a broad scope of substrates; these include glycosylation with mannosyl donors installed with a bulky TBS group at O3, donors bearing 4,6‐di‐O‐benzoyl groups, and acceptors known as sterically unmatched or hindered. For the ortho‐alkynylbenzoate β‐donors, an anomerization and glycosylation sequence can also ensure the highly β‐selective mannosylation. The 1‐α‐mannosyloxy‐isochromenylium‐4‐gold(I) complex ( Cα ), readily generated upon activation of the α‐mannosyl ortho‐alkynylbenzoate ( 1 α ) with Ph₃PAuBAr₄^F at ?35 °C, was well characterized by NMR spectroscopy; the occurrence of this species accounts for the high β‐selectivity in the present mannosylation.     

Alternative proton-conducting electrolytes and their electrochemical performances

This study was focused on the performances of membrane electrode assemblies (MEAs) consisting of the proton–conducting 90PVA/3PWA/4GPTMS/1P₂O₅/2Gl and 80PVA/10PWA/6GPTMS/2P₂O₅/2Gl hybrid membranes as electrolytes together with a Pt/C electrode for proton exchange membrane fuel cells. The MEAs were fabricated and tested as a function of temperature and humidity, and yielded a current density value of about 350?mA?cm^?2 at 60?°C and 100% relative humidity (RH) for the membrane electrolyte 80PVA/10PWA/6GPTMS/2P₂O₅/2Gl. These values were compared with Nafion? membranes, and the single-cell performances based on proton-conducting organic/inorganic hybrid electrolytes were discussed. The test conditions employed were equivalent for each MEA that had an active area of 5?cm². These hybrid membranes showed a high proton conductivity in the range of 10^?3–10^?2 S cm^?1 at low temperatures, i.e., 60, 80, and 90?°C, and 50%, 75%, and 100% RH.     

Darstellung,Kristallstrukturen, Schwingungsspektren und Normalkoordinatenanalyse von vier bindungsisomeren Tetrachlorodirhodanoosmaten(IV)

Preparation, Crystal Structures, Vibrational Spectra, and Normal Coordinate Analysis of Four Linkage Isomeric Tetrachlorodirhodanoosmates(IV) By treatment of cis- or trans-[OsCl₄I₂]^2? with (SCN)₂ in dichloromethane the linkage isomers cis-[OsCl₄(NCS)₂]^2? ( 1 ), trans-[OsCl₄(NCS)(SCN)]^2? ( 2 ), cis-[OsCl₄(NCS)(SCN)]^2? ( 3 ) and trans-[OsCl₄(SCN)₂]^2? ( 4 ) are formed which have been separated by ion exchange chromatography on diethylaminoethyl cellulose. The X-Ray structure determinations on single crystals of cis-(Ph₄As)₂[OsCl₄(NCS)₂] (triclinic, space group P1 , a = 10.019(5), b = 11.702(5), c = 21.922(5) Å, α = 83.602(5)°, β = 85.718(5)°, γ = 73.300(5)°, Z = 2), trans-(Ph₄As)₂[OsCl₄ · (NCS)(SCN)] (monoclinic, space group P2₁/c, a = 18.025(5), b = 11.445(5), c = 23.437(5) Å, β = 94.208(5)°, Z = 4), cis-(Ph₄As)₂[OsCl₄(NCS)(SCN)] (triclinic, space group P1 , a = 10.579(5), b = 11.682(5), c = 22.557(5) Å, α = 81.073(5)°, β = 85.807(5)°, γ = 87.677(5)°, Z = 2) and trans-(Ph₄As)₂ · [OsCl₄(SCN)₂] (triclinic, space group P1 , a = 10.615(5), b = 11.691(5), c = 11.907(5) Å, α = 111.314(5)°, β = 96.718(5)°, γ = 91.446(5)°, Z = 1) reveal the complete ordering of the complex anions. The via N or S coordinated thiocyanate groups are located nearly direct above one of the cis-positioned Cl ligands with Os? N? C angles of 171.2° and 174.3° ( 1 ), 162.3° ( 2 ), 172° ( 3 ) and Os? S? C angles of 108.3° ( 2 ), 105.7° ( 3 ) and 105.5° ( 4 ). Using the molecular parameters of the X-Ray determinations the low temperature (10 K) IR and Raman spectra of the (n-Bu₄N) salts of all four linkage isomers are assigned by normal coordinate analyses based on a modified valence force field. The valence force constants are f_d(OsN) = 1.59 ( 1 ), 1.67 ( 2 ), 1.60 ( 3 ) and f_d(OsS) = 1.27 ( 2 ), 1.31 ( 3 ) and 1.32 mdyn Å^?1 ( 4 ). Taking into account increments of the trans influence a good agreement between observed and calculated frequencies is achieved.     

Herstellung von 1,2,4‐Trithiolan‐, 1,2,4,5‐Tetrathian‐ sowie 1,2,3,5,6‐Pentathiepan‐S‐oxiden und deren Reaktionen mit (Ph3P)2Pt(η2‐C2H4). Kristallstrukturanalyse von 3,3,5,5‐Tetraphenyl‐1,2,4‐trithiolan‐1‐oxid

Metal Complexes of Functionalized Sulfur‐containing Ligands. XVII Synthesis of S ‐Oxides of 1,2,4‐Trithiolane, 1,2,4,5‐Tetrathiane as well as 1,2,3,5,6‐Pentathiepane, and their Reactions with (Ph₃P)₂Pt(η²‐C₂H₄). X‐Ray Structure Analysis of 3,3,5,5‐Tetraphenyl‐1,2,4‐trithiolane 1‐oxide 3,3,5,5‐Tetraphenyl‐1,2,4‐trithiolan ( 1 ) was oxidized using m‐chloroperbenzoic acid to give, selectively, the 3,3,5,5‐tetraphenyl‐1,2,4‐trithiolane 1‐oxide ( 2 ). 2 was characterized structurally. The reaction of octamethyl tetrathiadispiro[3.2.3.2]dodecane‐2,9‐dione ( 3 ) with trifluoroperacetic acid at –50 °C yielded the corresponding 5‐oxide 4 . Oxidation of octamethyl pentathiadispiro[3.3.3.2]tridecane‐2,9‐dione ( 5 ) with m‐chloroperbenzoic acid at 0 °C gave the 12‐oxide 6 . Treatment of 2 with two equivalents of (Ph₃P)₂Pt(η²‐C₂H₄) ( 7 ) afforded a mixture (1 : 1) of the complexes (Ph₃P)₂PtSCPh₂S ( 8 ) and (Ph₃P)₂Pt(η²‐Ph₂C=S=O) ( 9 ), respectively.     

Synthese von Nitrenkomplexen mit N-Trimethylsilylanilin. II. Charakterisierung und Kristallstruktur der Rhenium(V)-phenylnitren-Komplexe mer-[Re(NPh)Cl3(NH2Ph)(Ph3P)] und trans-[Re(NPh)(OMe)Cl2(Ph3P)2]

Synthesis of Phenylnitrene Complexes with N-Trimethylsilylaniline. II. Characterization and Crystal Structure of the Rhenium(V) Complexes mer-[Re(NPh)Cl₃(NH₂Ph)(Ph₃P)] and trans-[Re(NPh)(OMe)Cl₂(Ph₃P)₂] Reaction of [ReOCl₃(Ph₃P)₂] with N-trimethylsilylaniline yields mer-[Re(NPh)Cl₃(Ph₃P)₂], which reacts under air with excess of N-trimethylsilylaniline to form [Re(NPh)Cl₃ · (NH₂Ph)(Ph₃P)]. Crystallization from CH₂Cl₂/MeOH affords [Re(NPh)(OMe)Cl₂(Ph₃P)₂] as an additional product. [Re(NPh)Cl₃(NH₂Ph)(Ph₃P)] crystallizes in the monoclinic space group P2₁/n with a = 1 192.3(3); b = 1 918.9(3); c = 1 266.3(3) pm; β = 101.71(1)°; Z = 4. The rhenium atom has a distorted octahedral environment with the Cl atoms in meridional positions. The phenyl nitrene ligand is coordinated with an almost linear arrangement Re? N1? C40 = 166.8(6)° and with a bond distance Re?N = 170.5(6) pm. [Re(NPh)(OMe)Cl₂(Ph₃P)₂] · 1/2CH₂Cl₂ crystallizes in the triclinic space group P1 : a = 1 103.1(4); b = 1 227.9(4); c = 1 711.3(5) pm; α = 70.48(3)°; β = 72.71(3)°; γ = 80.03(3)°; Z = 2. The rhenium atom exhibits a distorted octahedral coordination with the Cl atoms and the phosphine ligands in trans positions. As a consequence of the competition of the nitrene ligand and the trans-coordinated methoxy group the Re?;N bond length is slightly lengthened to 173.2(7) pm, while the Re? O bond length of 193.4(6) pm is short. The bond angles Re? N? C70 and Re? O? C80 are 173.3(7)° and 139.1(7)°, respectively.     

Heptane-soluble homogeneous zirconocene catalyst: Synthesis of a single diastereomer,polymerization catalysis,and effect of silica supports

Bis(1-indenyl)-di[1′S, 2′R, 5′S)-methoxy]silane ( 1 ) was converted into a mixture of corresponding ansa-diastereomeric zirconocenes. Further purification afforded a single dia-stereomer, di[(1′S, 2′R, 5′S)-methoxy] silylene-bis[η⁵-1(R, R)-(+)-indenyl] dichlorozirconium ( 2 ), which is optically active and hydrocarbon soluble. Extremely rapid ethylene, propylene, and ethylene-hexene polymerizations were observed both in toluene and n-heptane solutions; for instance, at 50°C, activity for ethylene polymerization reaches ～ 1.5×10¹⁰ (g of PE/((mol of Zr) · [C₂H₄] · h). The “bare” zirconocenium ion generated from 2/TIBA/Ph₃CB(C₆F₅)₄ exhibits unusual polymerization behaviors; the polymerization activity increases monotonically with temperature of polymerization (T_p) up to a conventional polymerization condition (50–70°C), and the ¹³C NMR study shows that the isotactic poly-propylene obtained has fairly high [mmmm] methyl pentad distributions at high T_p (?25°C with [mmmm] ～ 0.93–0.75) and a perfect stereoregularity at low T_p (?0°C with [mmmm] > 0.99). The catalyst precursors 2 and Et(Ind)₂ZrCl₂ ( 3 ) supported on silica by different approaches produced poly(olefins) of different molecular weights and stereoregularities, and a methylaluminokane and Ph₃CB(C₆F₅)₄ free silica-supported zirconocene system was found to be activated by triisobutylaluminum. © 1995 John Wiley & Sons, Inc.     

Synthesis and Structure of Unprecedented Samarium Complex with Bulky Bis‐iminopyrrolyl Ligand via Intramolecular C=N Bond Activation

An unprecedentate samarium complex of the molecular composition [{κ³‐{(Ph₂CH)N=CH}₂C₄H₂N)}{κ³‐{(Ph₂CHN=CH)(Ph₂CHNCH)C₄H₂N}Sm}₂] ( 2 ), which was isolated by the reaction of a potassium salt of 2,5‐bis{N‐(diphenylmethyl)‐iminomethyl}pyrrolyl ligand [K(THF)₂{(Ph₂CH)N=CH}₂C₄H₂N)] ( 1 ) with anhydrous samarium diiodide in THF at 60 °C through the in situ reduction of imine bond is presented. The homoleptic samarium complex [[κ³‐{(Ph₂CH)–N=CH}₂C₄H₂N)]₃Sm] ( 3 ) can also be obtained from the reaction of compound 1 with anhydrous samarium triiodide (SmI₃) in THF at 60 °C. The molecular structures of complexes 2 and 3 were established by single‐crystal X‐ray diffraction analysis. The molecular structure of complex 2 reveals the formation of a C–C bond in the 2,5‐bis{N‐(diphenylmethyl)iminomethyl}pyrrole ligand moiety (Ph₂Py^–). However, complex 3 is a homoleptic samarium complex of three bis‐iminopyrrolyl ligands. In complex 2 , the samarium ion adopts an octahedral arrangement, whereas in complex 3 , a distorted three face‐centered trigonal prismatic mode of nine coordination is observed around the metal ion.     

Study of temperature effect on uni-univalent and uni-bivalent ion exchange reaction

Ion exchange equilibrium constant (K) for Cl⁻/Br⁻ and Cl⁻/C₂O₄²⁻ system was studied at different temperatures from 30 to 45°C. For both uni-univalent and uni-bivalent exchange systems, the value of K increases with rise in temperature i.e., from 1.16 at 30°C to 2.95 at 45°C for Cl⁻/Br⁻ system and 19.5 at 30°C to 30.0 at 45°C for Cl⁻/C₂O₄²⁻ system indicating the endothermic ion exchange reaction. The difference in K values at the same temperature for the two was related to the ionic charge of exchangeable ions in the solution. The article is published in the original.     

Ultra‐high molecular weight poly(ε‐caprolactone) by means of diphenyl bismuth bromide

Diphenyl bismuth bromide (Ph₂BiBr) allows for polymerizations of ε‐caprolactone in bulk at temperatures as low as 40 °C. Time conversion curves indicate a lower reactivity than tin(II) 2‐ethyl hexanoate (SnOct₂) plus alcohol at 120 °C and also at 60 °C. Ph₂BiBr also proved to be less reactive than Ph₂BiOEt, but more reactive than BiBr₃ and Bi(III)n‐hexanoate. Small amounts (≤1 wt %) of cyclic oligoester were detectable by MALDI‐TOF mass spectrometry even at a polymerization temperature of 40 °C. The molar masses depend on the monomer–initiator ratio (M/I) but not in a simple parallel manner. With M/I = 600/1 number average molecular weights (M_ns, corrected values) around 500 kDa were obtained. Even at low M/Is high molar mass polylactones were found and CH₂Br endgroups were not detectable. However, upon addition of tetra(ethylene glycol) the coinitiator was completely incorporated yielding telechelic polylactones and the molar mass increased with the monomer–coinitiator ratio. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 851–859, 2008     

Synthese und Eigenschaften von Triphenylzinnmolybdaten mit kettenförmigen Anionen des Typs 1∞[(Ph3Sn)MoO4]–. Die Kristallstrukturen von (nPr4N)[(Ph3Sn)MoO4]·CH3CN, (nBu4N)[(Ph3Sn)MoO4], [Zn(en)2(Ph3Sn)2(MoO4)2]·2DMF·EtOH und [Cu(en)2(Ph3Sn)2(MoO4)2]·2DMF·EtOH

The reaction of Ph₃SnCl, (R₄N)₂[Mo₆O₁₉] and (R₄N)OH in a molar ratio of 6:1:10 leads to the formation of (R₄N)[(Ph₃Sn)MoO₄] (R = ⁿPr ( 1 ), ⁿBu ( 2 )). Compounds 1· CH₃CN and 2 have been charactarized by IR spectroscopy and single crystal X‐ray diffraction. 1· CH₃CN forms orthorhombic crystals, space group P2₁2₁2₁ with a = 1339.9(2), b = 1508.9(2), c = 1733.2(3) pm. 2 crystallizes in the monoclinic space group P2₁ with a = 1342.6(2), b = 2280.3(4), c = 1344.0(2) pm, β = 118.34(1). Both compounds 1 and 2 consist of isolated R₄N⁺ cations and polymeric $\rm^{1}_{\infty}$ [(Ph₃Sn)MoO₄]^– chains with an alternating arrangement of Ph₃Sn⁺ and MoO₄^2– groups. Treatment of (Ph₃Sn)₂MoO₄ with bis(ethylenediamine)copper(II) succinate yields [Cu(en)₂(Ph₃Sn)₂(MoO₄)₂] ( 3 ). The zinc derivative [Zn(en)₂(Ph₃Sn)₂(MoO₄)₂] ( 4 ) is obtained similarly by reaction of (Ph₃Sn)₂MoO₄ with bis(ethylenediamine)zinc(II) formiate. Compounds 3· 2DMF · EtOH and 4· 2DMF · EtOH crystallize in the monoclinic space group P2₁/n with a = 1998.0(2), b = 1313.3(1), c = 2181.6(2) pm, β = 90.97(1)° for 3 and a = 2015.4(1), b = 1316.7(1), c = 2157.0(1) pm, β = 90.40(1)° for 4 . Like in the cases of 1 and 2, polymeric $\rm^{1}_{\infty}$ [(Ph₃Sn)MoO₄]^– chains are observed. The [M(en)₂]²⁺ units (M = Cu, Zn) act as linkers between the $\rm^{1}_{\infty}$ [(Ph₃Sn)MoO₄]^– chains to give 2D layer structures with (6, 3) net topology.     

Low‐temperature controlled free‐radical polymerization of vinyl monomers in the presence of a novel cyclic dixanthate under γ‐ray irradiation

The free‐radical polymerization of methyl acrylate (MA) has been studied in the presence of a novel cyclic dixanthate under γ‐ray irradiation (80 Gy min^?1) at room temperature (～28 °C), ?30 °C, and ?76 °C respectively. The resultant polymers have controlled molecular weights and relatively narrow molecular weight distributions, especially at low temperatures (i.e., ?30 and ?76 °C). The polymerization control may be associated with the temperature: the lower the temperature is, the more control there is. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry analysis of poly(methyl acrylate) (PMA) samples shows that there are at least three distributions: [3‐(MA)_n‐H]⁺ cyclic polymers, [3‐(MA)_n‐THF‐H]⁺, and [3‐(MA)_n‐(THF)₂‐H]⁺ linear PMAs. The relative content of the cyclic polymers markedly increases at a lower temperature, and this may be related to the reduced diffusion rate and the suppressed chain‐transfer reaction at the low temperature. It is evidenced that the good control of the polymerization at the low temperature may be associated with the suppressed chain‐transfer reaction, unlike reversible addition–fragmentation chain transfer polymerization. In addition, styrene bulk polymerizations have been performed, and gel permeation chromatography traces show that there is only one cyclic dixanthate moiety in the polymer chain. This article is the first to report the influence of a low temperature on controlled free‐radical polymerizations. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2847–2854, 2007