Solid-Adsorbed Polymer-Electrolyte Interphases for Stabilizing Metal Anodes in Aqueous Zn and Non-Aqueous Li Batteries

Polymers are known to adsorb spontaneously from liquid solutions in contact with high-energy substrates to form configurationally complex, but robust phases that often exhibit higher durability than might be expected from the individual physical bonds formed with the substrate. Rational control of the physical, chemical, and transport properties of such interphases has emerged as a fundamental opportunity for scientific and technological advances in energy storage technology but requires in-depth understanding of the conformation states and electrochemical effect of the adsorbed polymers. Here, we analyze the interfacial adsorption of oligomeric polyethylene glycol (PEG) chains of moderate sizes dissolved in protic and aprotic liquid electrolytes and find that there is an optimum polymer molecular weight of approximately 400 Da at which the highest columbic efficiency is achieved for both Zn and Li deposition. These findings point to a simple, versatile approach for extending the lifetime of batteries.     

Solid-Electrolyte Interphase Chemistries Towards High-Performance Aqueous Zinc Metal Batteries

Aqueous zinc metal batteries (AZMBs) are deemed a promising technology for electrochemical energy storage due to their high safety, low cost, and high energy density. However, AZMBs still suffer from severe side reactions, including Zn dendrite formation and intrinsic hydrogen evolution reaction. In contrast to the solid-electrolyte interphase (SEI) layer that stabilizes Li/Na/K metal anodes in organic electrolytes, it is difficult to form an SEI layer on the Zn surface because of the difficulty in decomposing the salt anions within the narrow electrochemical potential window of water. A team from the University of Adelaide reports a novel pure or hybrid electrolyte with H₂O by using dimethyl methylphosphonate (DMMP) as solvent or co-solvent to construct a uniform and stable phosphate-based SEI layer (ZnP₂O₆ and Zn₃(PO₄)₂). As a result, high Coulombic efficiencies and improved capacity retentions are obtained.     

Zincophilic Electrode Interphase with Appended Proton Reservoir Ability Stabilizes Zn Metal Anodes

The rampant dendrites and hydrogen evolution reaction (HER) resulting from the turbulent interfacial evolution at the anode/electrolyte are the main culprits of short lifespan and low Coulombic efficiency of Zn metal batteries. In this work, a versatile protective coating with excellent zincophilic and amphoteric features is constructed on the surface of Zn metal (ZP@Zn) as dendrite-free anodes. This kind of protective coating possesses the advantages of reversible proton storage and rapid desolvation kinetics, thereby mitigating the HER and facilitating homogeneous nucleation concomitantly. Furthermore, the space charge polarization effect promotes charge redistribution to achieve uniform Zn deposition. Accordingly, the ZP@Zn symmetric cell manifests excellent reversibility at an ultrahigh cumulative plating capacity of 4700 mAh cm⁻² and stable cycling at 80 % depth of discharge (DOD). The ZP@Zn//V₆O₁₃ pouch cell also reveals superior cycling stability with a high capacity of 326.6 mAh g⁻¹.     

Reversible Zn Metal Anodes Enabled by Trace Amounts of Underpotential Deposition Initiators

Routine electrolyte additives are not effective enough for uniform zinc (Zn) deposition, because they are hard to proactively guide atomic-level Zn deposition. Here, based on underpotential deposition (UPD), we propose an “escort effect” of electrolyte additives for uniform Zn deposition at the atomic level. With nickel ion (Ni²⁺) additives, we found that metallic Ni deposits preferentially and triggers the UPD of Zn on Ni. This facilitates firm nucleation and uniform growth of Zn while suppressing side reactions. Besides, Ni dissolves back into the electrolyte after Zn stripping with no influence on interfacial charge transfer resistance. Consequently, the optimized cell operates for over 900 h at 1 mA cm⁻² (more than 4 times longer than the blank one). Moreover, the universality of “escort effect” is identified by using Cr³⁺ and Co²⁺ additives. This work would inspire a wide range of atomic-level principles by controlling interfacial electrochemistry for various metal batteries.     

Dynamic Zn/Electrolyte Interphase and Enhanced Cation Transfer of Sol Electrolyte for All-Climate Aqueous Zinc Metal Batteries

Zn metal as one of the promising anodes of aqueous batteries possesses notable advantages, but it faces severe challenges from severe side reactions and notorious dendrite growth. Here, ultrathin nanosheets of α-zirconium phosphate (ZrP) are explored as an electrolyte additive. The nanosheets not only create a dynamic and reversible interphase on Zn but also promote the Zn²⁺ transportation in the electrolyte, especially in the outer Helmholtz plane near ZrP. Benefited from the enhanced kinetics and dynamic interphase, the pouch cells of Zn||LiMn₂O₄ using this electrolyte remarkably improve electrochemical performance under harsh conditions, i.e. Zn powders as the Zn anode, high mass loading, and wide temperatures. The results expand the materials available for this dynamic interphase, provide an insightful understanding of the enhanced charge transfer in the electrolyte, and realize the combination of dynamic interphase and enhanced kinetics for all-climate performance.     

An Ultrathin Inorganic Molecular Crystal Interfacial Layer for Stable Zn Anode

Zn metal anode suffers from dendrite growth and side reactions during cycling, significantly deteriorating the lifespan of aqueous Zn metal batteries. Herein, we introduced an ultrathin and ultra-flat Sb₂O₃ molecular crystal layer to stabilize Zn anode. The in situ optical and atomic force microscopes observations show that such a 10 nm Sb₂O₃ thin layer could ensure uniform under-layer Zn deposition with suppressed tip growth effect, while the traditional WO₃ layer undergoes an uncontrolled up-layer Zn deposition. The superior regulation capability is attributed to the good electronic-blocking ability and low Zn affinity of the molecular crystal layer, free of dangling bonds. Electrochemical tests exhibit Sb₂O₃ layer can significantly improve the cycle life of Zn anode from 72 h to 2800 h, in contrast to the 900 h of much thicker WO₃ even in 100 nm. This research opens up the application of inorganic molecular crystals as the interfacial layer of Zn anode.     

Guiding Zn Uniform Deposition with Polymer Additives for Long-lasting and Highly Utilized Zn Metal Anodes

The parasitic side reaction on Zn anode is the key issue which hinders the development of aqueous Zn-based energy storage systems on power-grid applications. Here, a polymer additive (PMCNA) engineered by copolymerizing 2-methacryloyloxyethyl phosphorylcholine (MPC) and N-acryloyl glycinamide (NAGA) was employed to regulate the Zn deposition environment for satisfying side reaction inhibition performance during long-term cycling with high Zn utilization. The PMCNA can preferentially adsorb on Zn metal surface to form a uniform protective layer for effective water molecule repelling and side reaction resistance. In addition, the PMCNA can guide Zn nucleation and deposition along 002 plane for further side reaction and dendrite suppression. Consequently, the PMCNA additive can enable the Zn//Zn battery with an ultrahigh depth of discharge (DOD) of 90.0 % for over 420 h, the Zn//active carbon (AC) capacitor with long cycling lifespan, and the Zn//PANI battery with Zn utilization of 51.3 % at low N/P ratio of 2.6.     

Zincophilic Interfacial Manipulation against Dendrite Growth and Side Reactions for Stable Zn Metal Anodes

Constructing multifunctional interphases to suppress the rampant Zn dendrite growth and detrimental side reactions is crucial for Zn anodes. Herein, a phytic acid (PA)-ZnAl coordination compound is demonstrated as a versatile interphase layer to stabilize Zn anodes. The zincophilic PA-ZnAl layer can manipulate Zn²⁺ flux and promote rapid desolvation kinetics, ensuring the uniform Zn deposition with dendrite-free morphology. Moreover, the robust PA-ZnAl protective layer can effectively inhibit the hydrogen evolution reaction and formation of byproducts, further contributing to the reversible Zn plating/stripping with high Coulombic efficiency. As a result, the Zn@PA-ZnAl electrode shows a lower Zn nucleation overpotential and higher Zn²⁺ transference number compared with bare Zn. The Zn@PA-ZnAl symmetric cell exhibits a prolonged lifespan of 650 h tested at 5 mA cm⁻² and 5 mAh cm⁻². Furthermore, the assembled Zn battery full cell based on this Zn@PA-ZnAl anode also delivers decent cycling stability even under harsh conditions.     

Bifunctional Interphase with Target-Distributed Desolvation Sites and Directionally Depositional Ion Flux for Sustainable Zinc Anode

Aqueous zinc batteries (AZBs) feature high safety and low cost, but intricate anodic side reactions and dendrite growth severely restrict their commercialization. Herein, ethylenediaminetetraacetic acid (EDTA) grafted metal organic framework (MOF-E) is proposed as a dually-functional anodic interphase for sustainable Zn anode. Specifically, the target-distributed EDTA serves as an ion-trapped tentacle to accelerate the desolvation and ionic transport by powerful chemical coordination, while the MOFs offer suitable ionic channels to induce oriented deposition. As a result, MOF-E interphase fundamentally suppresses side reactions and guides horizontally arranged Zn deposition with (002) preferred orientations. The Zn|MOF-E@Cu cell exhibits a markedly improved Coulombic efficiency of 99.7 % over 2500 cycles, and the MOF-E@Zn|KVOH (KV₁₂O_30-y ⋅ nH₂O) cell yields a steady circulation of 5000 cycles@90.47 % at 8 A g⁻¹.     

Monolithic Phosphate Interphase for Highly Reversible and Stable Zn Metal Anode

Zinc metal battery (ZMB) is promising as the next generation of energy storage system, but challenges relating to dendrites and corrosion of the zinc anode are restricting its practical application. Here, to stabilize Zn anode, we report a controlled electrolytic method for a monolithic solid-electrolyte interphase (SEI) via a high dipole moment solvent dimethyl methylphosphonate (DMMP). The DMMP-based electrolytes can generate a homogeneous and robust phosphate SEI (Zn₃(PO₄)₂ and ZnP₂O₆). Benefiting from the protecting impact of this in situ monolithic SEI, the zinc electrode exhibits long-term cycling of 4700 h and a high Coulombic efficiency 99.89 % in Zn|Zn and Zn|Cu cell, respectively. The full V₂O₅|Zn battery with DMMP-H₂O hybrid electrolyte exhibits a high capacity retention of 82.2 % following 4000 cycles under 5 A g⁻¹. The first success in constructing the monolithic phosphate SEI will open a new avenue in electrolyte design for highly reversible and stable Zn metal anodes.     

In situ Observation of Evolving H2 and Solid Electrolyte Interphase Development at Potassium Insertion Materials within Highly Concentrated Aqueous Electrolytes

The solid-electrolyte interphase (SEI) is key to stable, high voltage lithium-ion batteries (LIBs) as a protective barrier that prevents electrolyte decomposition. The SEI is thought to play a similar role in highly concentrated water-in-salt electrolytes (WISEs) for emerging aqueous batteries, but its properties remain unknown. In this work, we utilized advanced scanning electrochemical microscopy (SECM) and operando electrochemical mass spectrometry (OEMS) techniques to gain deeper insight into the SEI that occurs within highly concentrated WISEs. As a model, we focus on a 55 mol/kg K(FSA)_0.6(OTf)_0.4 electrolyte and a 3,4,9,10-perylenetetracarboxylic diimide negative electrode. For the first time, our work showed distinctly passivating structures with slow apparent electron transfer rates alike to the SEI found in LIBs. In situ analyses indicated stable passivating structures when PTCDI was stepped to low potentials (≈−1.3 V vs. Ag/AgCl). However, the observed SEI was discontinuous at the surface and H₂ evolution occurred as the electrode reached more extreme potentials. OEMS measurements further confirmed a shift in the evolution of detectable H₂ from −0.9 V to <−1.4 V vs. Ag/AgCl when changing from dilute to concentrated electrolytes. In all, our work shows a combined approach of traditional battery measurements with in situ analyses for improving characterization of other unknown SEI structures.     

Alleviating Side Reactions on Zn Anodes for Aqueous Batteries by a Cell Membrane Derived Phosphorylcholine Zwitterionic Protective Layer

Aqueous zinc (Zn) ion batteries are attractive for next generation batteries with high safety, yet their applications are still hindered by the uncontrollable dendrite formation and side reactions on Zn anode. Here, a polyzwitterion protective layer (PZIL) was engineered by polymerizing 2-methacryloyloxyethyl phosphorylcholine (MPC) in carboxymethyl chitosan (CMCS), which renders the following merits: the choline groups of MPC can preferentially adsorb onto Zn metal to avoid side reactions; the charged phosphate groups chelate with Zn²⁺ to regulate the solvation structure, further improving side reaction inhibition; the Hofmeister effect between ZnSO₄ and CMCS can enhance the interfacial contact during electrochemical characterization. Consequently, the symmetrical Zn battery with PZIL can keep stable for more than 1000 hours under the ultra-high current density of 40 mA cm⁻². The PZIL confers the Zn/MnO₂ full battery and Zn/active carbon (AC) capacitor with stable cycling performance under high current density.     

In-Situ Constructing A Heterogeneous Layer on Lithium Metal Anodes for Dendrite-Free Lithium Deposition and High Li-ion Flux

Constructing efficient artificial solid electrolyte interface (SEI) film is extremely vital for the practical application of lithium metal batteries. Herein, a dense artificial SEI film, in which lithiophilic Zn/Li_xZn_y are uniformly but nonconsecutively dispersed in the consecutive Li⁺-conductors of Li_xSiO_y, Li₂O and LiOH, is constructed via the in situ reaction of layered zinc silicate nanosheets and Li. The consecutive Li⁺-conductors can promote the desolvation process of solvated-Li⁺ and regulate the transfer of lithium ions. The nonconsecutive lithiophilic metals are polarized by the internal electric field to boost the transfer of lithium ions, and lower the nucleation barrier. Therefore, a low polarization of ≈50 mV for 750 h at 2.0 mA cm⁻² in symmetric cells, and a high capacity retention of 99.2 % in full cells with a high lithium iron phosphate areal loading of ≈13 mg cm⁻² are achieved. This work offers new sights to develop advanced alkali metal anodes for efficient energy storage.     

Ratiometric chemosensor for fluorescent determination of Zn2+ in aqueous ethanol

A new ratiometric and selective fluorescent chemosensor (1) for quantification of zinc ions in aqueous ethanol has been synthesized and investigated in this work. In an environmentally friendly media of 30% (v/v) water/ethanol and 10 mM Tris-HCl neutral buffer (pH 7.03), 1 displayed selective Zn²⁺ ratiometric fluorescence response, with a dynamic working range of 1.0-8.0 μM and a detection limit of 0.5 μM Zn²⁺. The determination of Zn²⁺ in synthesized water sample was also successful.     

ZnF2-Riched Inorganic/Organic Hybrid SEI: in situ-Chemical Construction and Performance-Improving Mechanism for Aqueous Zinc-ion Batteries

Uncontrolled dendrites growth and serious parasitic reactions in aqueous electrolytes, greatly hinder the practical application of aqueous zinc-ion battery. On the basis of in situ-chemical construction and performance-improving mechanism, multifunctional fluoroethylene carbonate (FEC) is introduced into aqueous electrolyte to construct a high-quality and ZnF₂-riched inorganic/organic hybrid SEI (ZHS) layer on Zn metal anode (ZMA) surface. Notably, FEC additive can regulate the solvated structure of Zn²⁺ to reduce H₂O molecules reactivity. Additionally, the ZHS layer with strong Zn²⁺ affinity can avoid dendrites formation and hinder the direct contact between the electrolyte and anode. Therefore, the dendrites growth, Zn corrosion, and H₂ evolution reaction on ZMA in FEC-included ZnSO₄ electrolyte are highly suppressed. Thus, ZMA in such electrolyte realize a long cycle life over 1000 h and deliver a stable coulombic efficiency of 99.1 % after 500 cycles.     

Discovering the Intrinsic Causes of Dendrite Formation in Zinc Metal Anodes: Lattice Defects and Residual Stress

Developing a highly stable and dendrite-free zinc anode is essential to the commercial application of zinc metal batteries. However, the understanding of zinc dendrites formation mechanism is still insufficient. Herein, for the first time, we discover that the interfacial heterogeneous deposition induced by lattice defects and epitaxial growth limited by residual stress are intrinsic and critical causes for zinc dendrite formation. Therefore, an annealing reconstruction strategy was proposed to eliminate lattice defects and stresses in zinc crystals, which achieve dense epitaxial electrodeposition of zinc anode. The as-prepared annealed zinc anodes exhibit dendrite-free morphology and enhanced electrochemical cycling stability. This work first proves that lattice defects and residual stresses are also very important factors for epitaxial electrodeposition of zinc in addition to crystal orientation, which can provide a new mechanism for future researches on zinc anode modification.     

An Integrated Two Phases Approach to Zn2+ Ions Electroreduction on Hg

The following two numerical models have been applied to zinc cations electroreduction in 1 M NaClO₄ water solution: a classical EE model describing the concentration of involved species in solution (semi infinitive diffusion region), an extended EE model describing both: the concentration of involved species in solution and the concentration of metallic zinc inside mercury drop (in limited area of diffusion). In the latter model the inner part of mercury drop and surrounding solution were treated as dynamic interrelated system. Both models were applied to experimental cyclic voltammetric CV data in 1 M NaClO₄, the results compared and discussed. The concentration profiles of all species including metallic zinc inside mercury drop were performed. The presented integrated model is essential for theoretical and analytical aspects of the electrochemistry of mercury soluble metal cations and amalgams.     

蛋白质在固定Zn2+金属螯合亲和色谱中的变性热力学

在15~85℃宽温度范围,研究了蛋白质在固定Zn2 金属螯合色谱系统中的热行为和变性热力学。实验结果表明,蛋白质在色谱过程都有一个固定的热转变温度:核糖核酸酶(RNase)、α-胰凝乳蛋白酶原A(α-Chy)的热转变温度约为55℃,细胞色素C(Cyt-C)和溶菌酶(Lys)约为65℃;,热转变温度的出现标志蛋白质构象发生变化;利用Van′tHoff作图测定了蛋白质在色谱系统热变性时的标准焓变ΔH°和标准熵变ΔS°,提出用标准熵变ΔS°和自由能变ΔG°判断蛋白质构象变化;利用ΔH°-ΔS°的线性关系估算了蛋白质热变性时的补偿温度,鉴定了蛋白质各变体在金属螯合色谱中保留机理的同一性,RNase、Cyt-C、Lys和α-Chy的补偿温度分别为55℃、65.8℃、65.2℃和54.8℃;根据蛋白质热变性时的补偿温度和构象变化熵变Δ(ΔS°)的大小,讨论了蛋白质在阳离子交换色谱和固定Zn的金属螯合色谱体系中的热稳定性。实验证明,在IDA裸柱引入Zn2 后蛋白质在色谱系统中的热稳定性减小,平均补偿温度从65.3℃降低到59.7℃,而构象变化熵变的绝对值大幅度升高。     

[M(en)3]2Sn2Se6(M=Mn,Zn)的制备及其热稳定性

用有机溶剂热生长技术(SolvothermalTechnique)制备过渡金属锰和锌硒化物[Mn(en)3]2Sn2Se6(Ⅰ),[Zn(en)3]2Sn2Se6(Ⅱ).用单晶X射线衍射技术对其进行晶体结构分析.[Zn(en)3]2Sn2Se6样品的热分析结果表明,该化合物的热分解分三步进行.光学性质测试表明它们是半导体材料,[Mn(en)3]2Sn2Se6的能带隙为1.76eV.[Zn(en)3]2Sn2Se6的能带隙为2.49eV.     

Uptake of Divalent Metal Ions (Cu2+, Zn2+ and Cd2+) by Polysiloxane Immobilized Monoamine Ligand System

ABSTRACT

Porous solid siloxane polymers carrying a monoamine functional group of formula P-(CH₂)₃NH₂ (Where P- represents a siloxane framework silica like ) has been prepared by polycondensation of Si(OEt)₄ and (MeO)₃Si(CH₂)₃-NH₂. Treatment of aqueous solutions of divalent metal ions with the polysiloxane monoamine ligand system demonstrates that this material has high potential for preconcentration of metal ions (Cu²⁺, Zn²⁺ and Cd²⁺). The tendency of these divalent metal ions to chemisorb by the monoamine ligand system at the optimum conditions increases in the order: Cd²⁺ <Zn²⁺ <Cu²⁺. The optimum pH is 5.5 for copper and 6-7 for zinc and cadmium. The ammonia/ ammonium chloride buffer solution gave maximum uptake for all metal ions. It is also found that the uptake of copper ions is concentration dependent and is independent of the presence of other competing ions. The monoamine ligand system suffers from leaching of ligand containing groups upon treatment with acidic solutions. The highest leaching occurs at low pH.