Decoupling Redox Hopping and Catalysis in Metal-Organic Frameworks -based Electrocatalytic CO2 Reduction

Traditional MOF e-CRR, constructed from catalytic linkers, manifest a kinetic bottleneck during their multi-electron activation. Decoupling catalysis and charge transport can address such issues. Here, we build two MOF/e-CRR systems, CoPc@NU-1000 and TPP(Co)@NU-1000, by installing cobalt metalated phthalocyanine and tetraphenylporphyrin electrocatalysts within the redox active NU-1000 MOF. For CoPc@NU-1000, the e-CRR responsive Co^I/0 potential is close to that of NU-1000 reduction compared to the TPP(Co)@NU-1000. Efficient charge delivery, defined by a higher diffusion (D_hop=4.1×10⁻¹² cm² s⁻¹) and low charge-transport resistance ( =59.5 Ω) in CoPC@NU-1000 led FE_CO=80 %. In contrast, TPP(Co)@NU-1000 fared a poor FE_CO=24 % (D_hop=1.4×10⁻¹² cm² s⁻¹ and =91.4 Ω). For such a decoupling strategy, careful choice of the host framework is critical in pairing up with the underlying electrochemical properties of the catalysts to facilitate the charge delivery for its activation.     

Complexes Featuring a cis-[M U M] Core (M=Rh,Ir): A New Route to Uranium-Metal Multiple Bonds

Although examples of multiple bonds between actinide elements and main-group elements are quite common, studies of the multiple bonds between actinide elements and transition metals are extremely rare owing to difficulties associated with their synthesis. Here we report the first example of molecular uranium complexes featuring a cis-[M U M] core (M=Rh, Ir), which exhibits an unprecedented arrangement of two M U double dative bond linkages to a single U center. These complexes were prepared by the reactions of chlorine-bridged heterometallic complexes [{U{N(CH₃)(CH₂CH₂NPⁱPr₂)₂}(Cl)₂[(μ-Cl)M(COD)]₂}] (M=Rh, Ir) with MeMgBr or MeLi, a new method for the construction of species with U−M multiple bonds. Theoretical calculations including dispersion confirmed the presence of two U M double dative bonds in these complexes. This study not only enriches the U M multiple bond chemistry, but also provides a new opportunity to explore the bonding of actinide elements.     

Phosphazenyl Phosphines: The Most Electron‐Rich Uncharged Phosphorus Brønsted and Lewis Bases

It was discovered that phosphazenyl phosphines (PAPs) can be stronger P‐superbases than the corresponding Schwesinger type phosphazene N‐superbases. A simple synthetic access to this class of PR₃ derivatives including their homologization is described. XRD structures, proton affinities (PA), and gas‐phase basicities (GB) as well as calculated and experimental pK values in THF are presented. In contrast to their N‐basic counterparts, PAPs are also privileged ligands in transition metal chemistry. In fact, they are currently the strongest uncharged P‐donors known, exceeding classical and more recently discovered ligands such as PtBu₃ and imidazolin‐2‐ylidenaminophosphines (IAPs) with respect to their low Tolman electronic parameters (TEPs) and large cone angles.     

Triplet Generation Through Singlet Fission in Metal-Organic Framework: An Alternative Route to Inefficient Singlet-Triplet Intersystem Crossing

High quantum yield triplets, populated by initially prepared excited singlets, are desired for various energy conversion schemes in solid working compositions like porous MOFs. However, a large disparity in the distribution of the excitonic center of mass, singlet-triplet intersystem crossing (ISC) in such assemblies is inhibited, so much so that a carboxy-coordinated zirconium heavy metal ion cannot effectively facilitate the ISC through spin-orbit coupling. Circumventing this sluggish ISC, singlet fission (SF) is explored as a viable route to generating triplets in solution-stable MOFs. Efficient SF is achieved through a high degree of interchromophoric coupling that facilitates electron super-exchange to generate triplet pairs. Here we show that a predesigned chromophoric linker with extremely poor ISC efficiency (k_ISC) but form triplets in MOF in contrast to the frameworks that are built from linkers with sizable k_ISC but . This work opens a new photophysical and photochemical avenue in MOF chemistry and utility in energy conversion schemes.     

Double‐Gyroid Nanostructure Formation by Aggregation‐Induced Atropisomerization and Co‐Assembly of Ionic Liquid‐Crystalline Amphiphiles

We report a new molecular‐design principle for creating double‐gyroid nanostructured molecular assemblies based on atropisomerization. Ionic amphiphiles containing two imidazolium rings close to each other were designed and synthesized. NMR data revealed that the rotation of the imidazolium rings is restricted, with an activation energy as high as 63 kJ mol^?1 in DMSO‐d₆ solution (DFT prediction for a model compound in the vacuum: 90–100 kJ mol^?1). Due to the restricted rotation, the amphiphiles feature “double” atropisomeric axes in their ionic segments and form three stable atropisomers: meso, R, and S. These isomers co‐organize into ‐type bicontinuous cubic liquid‐crystalline mesophases through nanosegregation of the ionic and non‐ionic parts. Considering the intrinsic characteristic of ‐type bicontinuous cubic structures that they are composed of intertwined right‐ and left‐handed single gyroids, we propose that the simultaneous presence of both R‐ and S‐atropisomers is an important contributor to the formation of double‐gyroid structures.     

An Artificial Single Molecular Channel Showing High Chloride Transport Selectivity and pH-Responsive Conductance

Inspired by the unique structure and function of the natural chloride channel (ClC) selectivity filter, we present herein the design of a ClC-type single channel molecule. This channel displays high ion transport activity with half-maximal effective concentration, EC₅₀, of 0.10 μM, or 0.075 mol % (channel molecule to lipid ratio), as determined by fluorescent analysis using lucigenin-encapsulated vesicles. Planar bilayer lipid membrane conductance measurements indicated an excellent Cl⁻/K⁺ selectivity with a permeability ratio P /P up to 12.31, which is comparable with the chloride selectivity of natural ClC proteins. Moreover, high anion/anion selectivity (P /P =66.21) and pH-dependent conductance and ion selectivity of the channel molecule were revealed. The ClC-like transport behavior is contributed by the cooperation of hydrogen bonding and anion–π interactions in the central macrocyclic skeleton, and by the existence of pH-responsive terminal phenylalanine residues.     

Supramolecular Barrel-Rosette Ion Channel Based on 3,5-Diaminobenzoic Acid for Cation-Anion Symport

The structural tropology and functions of natural cation-anion symporting channels have been continuously investigated due to their crucial role in regulating various physiological functions. To understand the physiological functions of the natural symporter channels, it is vital to develop small-molecule-based biomimicking systems that can provide mechanistic insights into the ion-binding sites and the ion-translocation pathways. Herein, we report a series of bis((R)-(−)-mandelic acid)-linked 3,5-diaminobenzoic acid based self-assembled ion channels with distinctive ion transport ability. Ion transport experiment across the lipid bilayer membrane revealed that compound 1 b exhibits the highest transport activity among the series, and it has interesting selective co-transporting functions, i.e., facilitates K⁺/ClO₄⁻ symport. Electrophysiology experiments confirmed the formation of supramolecular ion channels with an average diameter of 6.2±1 Å and single channel conductance of 57.3±1.9 pS. Selectivity studies of channel 1 b in a bilayer lipid membrane demonstrated a permeability ratio of , , and indicating the higher selectivity of the channel towards KClO₄ over KCl salt. A hexameric assembly of a trimeric rosette of 1 b was subjected to molecular dynamics simulations with different salts to understand the supramolecular channel formation and ion selectivity pattern.     

Blended Conjugated Host and Unconjugated Dopant Polymers Towards N-type All-Polymer Conductors and High-ZT Thermoelectrics

N-Type thermoelectrics typically consist of small molecule dopant+polymer host. Only a few polymer dopant+polymer host systems have been reported, and these have lower thermoelectric parameters. N-type polymers with high crystallinity and order are generally used for high-conductivity ( ) organic conductors. Few n-type polymers with only short-range lamellar stacking for high-conductivity materials have been reported. Here, we describe an n-type short-range lamellar-stacked all-polymer thermoelectric system with highest of 78 S⁻¹, power factor (PF) of 163 μW m⁻¹ K⁻², and maximum Figure of merit (ZT) of 0.53 at room temperature with a dopant/host ratio of 75 wt%. The minor effect of polymer dopant on the molecular arrangement of conjugated polymer PDPIN at high ratios, high doping capability, high Seebeck coefficient (S) absolute values relative to , and atypical decreased thermal conductivity ( ) with increased doping ratio contribute to the promising performance.     

The Origin of Solvent Deprotonation in LiI-added Aprotic Electrolytes for Li-O2 Batteries

LiI and LiBr have been employed as soluble redox mediators (RMs) in electrolytes to address the sluggish oxygen evolution reaction kinetics during charging in aprotic Li-O₂ batteries. Compared to LiBr, LiI exhibits a redox potential closer to the theoretical one of discharge products, indicating a higher energy efficiency. However, the reason for the occurrence of solvent deprotonation in LiI-added electrolytes remains unclear. Here, by combining ab initio calculations and experimental validation, we find that it is the nucleophile that triggers the solvent deprotonation and LiOH formation via nucleophilic attack, rather than the increased solvent acidity or the elongated C−H bond as previously suggested. As a comparison, the formation of in LiBr-added electrolytes is found to be thermodynamically unfavorable, explaining the absence of LiOH formation. These findings provide important insight into the solvent deprotonation and pave the way for the practical application of LiI RM in aprotic Li-O₂ batteries.     

Inorganic Solid-State Nonlinear Optical Switch with a Linearly Tunable Tc Spanning a Wide Temperature Range

Nonlinear optical (NLO) switch materials that turn on/off second-harmonic generation (SHG) at a phase transition temperature (T_c) are promising for applications in the fields of photoswitching and optical computing. However, precise control of T_c remains challenging, mainly because a linearly tunable T_c has not been reported to date. Herein, we report a unique selenate, tetragonal P 2₁c [Ag(NH₃)₂]₂SeO₄ with a=b=8.5569(2) Å and c=6.5208(2) Å that exhibits a strong SHG intensity (1.3×KDP) and a large birefringence (Δn_obv.=0.08). This compound forms a series of isostructural solid-solution crystals [Ag(NH₃)₂]₂S_xSe_1−xO₄ (x=0–1.00) that exhibit excellent NLO switching performance and an unprecedented linearly tunable spanning 430 to 356 K. The breaking of localized hydrogen bonds between SeO₄²⁻ and the cation triggers a phase transition accompanied by hydrogen bond length changes with increasing x and a linear change in the enthalpy .     

Broad Dual Emission by Codoping Cr3+ (d→d) and Bi3+ (s→p) in Cs2Ag0.6Na0.4InCl6 Double Perovskite

A phosphor emitting both white light and broad near-infrared (NIR) radiation can simultaneously provide visual inspection and early signs of rotting of food products. The broad NIR emission is absorbed by the vibrational overtones of water molecules present in food items, providing the non-invasive image contrast to assess the food freshness. Here we design a phosphor, namely, Cr³⁺-Bi³⁺-codoped Cs₂Ag_0.6Na_0.4InCl₆, that simultaneously emit warm white light and broad NIR (1000 nm) radiation with quantum yield 27 %. This dual emitter is designed by combining the features of s²-electron (Bi³⁺) and d³-electron (Cr³⁺) doping in a weak crystal field of the halide perovskite host. excitation of Bi³⁺, using a commercial 370 nm ultraviolet light-emitting-diodes (UV-LED), yields both the emissions. A fraction of the excited Bi³⁺ dopants emit the warm white light, and the other fraction transfers its energy non-radiatively to Cr³⁺. Then the Cr³⁺ de-excites emitting broad NIR emission. Temperature dependent (6.4–300 K) photoluminescence in combination with Tanabe-Sugano diagram show that the Cr³⁺ experiences a weak crystal field ( =2.2), yielding the NIR emission. As a proof of concept, we fabricated a panel containing 122 phosphor-converted LEDs, demonstrating its capability to inspect food products.     

A Long Cycle‐Life High‐Voltage Spinel Lithium‐Ion Battery Electrode Achieved by Site‐Selective Doping

Spinel LiNi_0.5Mn_1.5O₄ (LNMO) is a promising cathode candidate for the next‐generation high energy‐density lithium‐ion batteries (LIBs). Unfortunately, the application of LNMO is hindered by its poor cycle stability. Now, site‐selectively doped LNMO electrode is prepared with exceptional durability. In this work, Mg is selectively doped onto both tetrahedral (8a) and octahedral (16c) sites in the Fd m structure. This site‐selective doping not only suppresses unfavorable two‐phase reactions and stabilizes the LNMO structure against structural deformation, but also mitigates the dissolution of Mn during cycling. Mg‐doped LNMOs exhibit extraordinarily stable electrochemical performance in both half‐cells and prototype full‐batteries with novel TiNb₂O₇ counter‐electrodes. This work pioneers an atomic‐doping engineering strategy for electrode materials that could be extended to other energy materials to create high‐performance devices.     

A Symmetry-Broken Charge-Separated State in the Marcus Inverted Region

We report a long-lived charge-separated state in a chromophoric pair ( DC-PDI₂ ) that uniquely integrates the advantages of fundamental processes of photosynthetic reaction centers: i) Symmetry-breaking charge-separation (SB-CS) and ii) Marcus-inverted-region dependence. The near-orthogonal bichromophoric DC-PDI₂ manifests an ultrafast evolution of the SB-CS state with a time constant of =0.35±0.02 ps and a slow charge recombination (CR) kinetics with =4.09±0.01 ns in ACN. The rate constant of CR of DC-PDI₂ is 11 686 times slower than SB-CS in ACN, as the CR of the PDI radical ion-pair occurs in the deep inverted region of the Marcus parabola ( >λ). In contrast, an analogous benzyloxy (BnO)-substituted DC-BPDI₂ showcases a ≈10-fold accelerated CR kinetics with lowering to ≈1536 in ACN, by virtue of a decreased CR driving force. The present investigation demonstrates a control of molecular engineering to tune the energetics and kinetics of the SB-CS material, which is essential for next-generation optoelectronic devices.     

Entropic Contributions to Sodium Solvation and Solvent Stabilization upon Electrochemical Sodium Deposition from Diglyme and Propylene Carbonate Electrolytes

The formation of an appropriate solid electrolyte interphase (SEI) at the anode of a sodium battery is crucially dependent on the electrochemical stability of solvent and electrolyte at the redox potential of Na/Na⁺ in the respective system. In order to determine entropic contributions to the relative stability of the electrolyte solution, we measure the reaction entropy of Na metal deposition for diglyme (DG) and propylene carbonate (PC) based electrolyte solutions by electrochemical microcalorimetry at single electrodes. We found a large positive reaction entropy for Na⁺ deposition in DG of Δ_R 234 J mol⁻¹ K⁻¹ (c.f.: Δ_R 83 J mol⁻¹ K⁻¹), which signals substantial entropic destabilization of Na⁺ in DG by about 0.73 eV, thus increasing the stability of solvent and electrolyte relative to Na⁺ reduction. We attribute this strong entropic destabilization to a highly negative solvation entropy of Na⁺, due to the low dielectric constant and high freezing entropy of DG.     

Quantum Nuclear Delocalization and its Rovibrational Fingerprints

Quantum mechanics dictates that nuclei must undergo some delocalization. In this work, emergence of quantum nuclear delocalization and its rovibrational fingerprints are discussed for the case of the van der Waals complex . The equilibrium structure of is planar and T-shaped, one He atom solvating the quasi-linear He−H⁺−He core. The dynamical structure of , in all of its bound states, is fundamentally different. As revealed by spatial distribution functions and nuclear densities, during the vibrations of the molecule the solvating He is not restricted to be in the plane defined by the instantaneously bent chomophore, but freely orbits the central proton, forming a three-dimensional torus around the chromophore. This quantum delocalization is observed for all vibrational states, the type of vibrational excitation being reflected in the topology of the nodal surfaces in the nuclear densities, showing, for example, that intramolecular bending involves excitation along the circumference of the torus.     

Highly Selective Electrochemical Reduction of CO2 to Alcohols on an FeP Nanoarray

Electrochemical reduction of CO₂ into various chemicals and fuels provides an attractive pathway for environmental and energy sustainability. It is now shown that a FeP nanoarray on Ti mesh (FeP NA/TM) acts as an efficient 3D catalyst electrode for the CO₂ reduction reaction to convert CO₂ into alcohols with high selectivity. In 0.5 m KHCO₃, such FeP NA/TM is capable of achieving a high Faradaic efficiency (FE ) up to 80.2 %, with a total FE of 94.3 % at ?0.20 V vs. reversible hydrogen electrode. Density functional theory calculations reveal that the FeP(211) surface significantly promotes the adsorption and reduction of CO₂ toward CH₃OH owing to the synergistic effect of two adjacent Fe atoms, and the potential‐determining step is the hydrogenation process of *CO.