Interface Design Enabling Stable Polymer/Thiophosphate Electrolyte Separators for Dendrite-Free Lithium Metal Batteries

Organic/inorganic interfaces greatly affect Li⁺ transport in composite solid electrolytes (SEs), while SE/electrode interfacial stability plays a critical role in the cycling performance of solid-state batteries (SSBs). However, incomplete understanding of interfacial (in)stability hinders the practical application of composite SEs in SSBs. Herein, chemical degradation between Li₆PS₅Cl (LPSCl) and poly(ethylene glycol) (PEG) is revealed. The high polarity of PEG changes the electronic state and structural bonding of the PS₄³⁻ tetrahedra, thus triggering a series of side reactions. A substituted terminal group of PEG not only stabilizes the inner interfaces but also extends the electrochemical window of the composite SE. Moreover, a LiF-rich layer can effectively prevent side reactions at the Li/SE interface. The results provide insights into the chemical stability of polymer/sulfide composites and demonstrate an interface design to achieve dendrite-free lithium metal batteries.     

Reforming the Uniformity of Solid Electrolyte Interphase by Nanoscale Structure Regulation for Stable Lithium Metal Batteries

The stability of high-energy-density lithium metal batteries depends on the uniformity of solid electrolyte interphase (SEI) on lithium metal anodes. Rationally improving SEI uniformity is hindered by poorly understanding the effect of structure and components of SEI on its uniformity. Herein, a bilayer structure of SEI formed by isosorbide dinitrate (ISDN) additives in localized high-concentration electrolytes was demonstrated to improve SEI uniformity. In the bilayer SEI, LiN_xO_y generated by ISDN occupies top layer and LiF dominates bottom layer next to anode. The uniformity of lithium deposition is remarkably improved with the bilayer SEI, mitigating the consumption rate of active lithium and electrolytes. The cycle life of lithium metal batteries with bilayer SEI is three times as that with common anion-derived SEI under practical conditions. A prototype lithium metal pouch cell of 430 Wh kg⁻¹ undergoes 173 cycles. This work demonstrates the effect of a reasonable structure of SEI on reforming SEI uniformity.     

Eutectic-Based Polymer Electrolyte with the Enhanced Lithium Salt Dissociation for High-Performance Lithium Metal Batteries

The deployment of lithium metal anode in solid-state batteries with polymer electrolytes has been recognized as a promising approach to achieving high-energy-density technologies. However, the practical application of the polymer electrolytes is currently constrained by various challenges, including low ionic conductivity, inadequate electrochemical window, and poor interface stability. To address these issues, a novel eutectic-based polymer electrolyte consisting of succinonitrile (SN) and poly (ethylene glycol) methyl ether acrylate (PEGMEA) is developed. The research results demonstrate that the interactions between SN and PEGMEA promote the dissociation of the lithium difluoro(oxalato) borate (LiDFOB) salt and increase the concentration of free Li⁺. The well-designed eutectic-based PAN_1.2-SPE (PEGMEA: SN=1: 1.2 mass ratio) exhibits high ionic conductivity of 1.30 mS cm⁻¹ at 30 °C and superior interface stability with Li anode. The Li/Li symmetric cell based on PAN_1.2-SPE enables long-term plating/stripping at 0.3 and 0.5 mA cm⁻², and the Li/LiFePO₄ cell achieves superior long-term cycling stability (capacity retention of 80.3 % after 1500 cycles). Moreover, Li/LiFePO₄ and Li/LiNi_0.6Co_0.2Mn_0.2O₂ pouch cells employing PAN_1.2-SPE demonstrate excellent cycling and safety characteristics. This study presents a new pathway for designing high-performance polymer electrolytes and promotes the practical application of high-stable lithium metal batteries.     

Multiple Dynamic Bonds-Driven Integrated Cathode/Polymer Electrolyte for Stable All-Solid-State Lithium Metal Batteries

All-solid-state lithium metal batteries (LMBs) are considered as the promising higher-energy and improved-safety energy-storage systems. Nevertheless, the electrolyte-electrodes interfacial issues due to the limited solid physical contact lead to discontinuous interfacial charge transport and large interfacial resistance, thereby suffering from unsatisfactory electrochemical performance. Herein, we construct an integrated cathode/polymer electrolyte for all-solid-state LMBs under the action of polymer chains exchange and recombination originating from multiple dynamic bonds in our well-designed dynamic supramolecular ionic conductive elastomers (DSICE) molecular structure. The DSICE acts as polymer electrolytes with excellent electrochemical performance and mechanical properties, achieving the ultrathin pure polymer electrolyte thickness (12 μm). Notably, the DSICE also functions as lithium iron phosphate (LiFePO₄, LFP) cathode binders with enhanced adhesive capability. Such well-constructed Li|DSICE|LFP-DSICE cells generate delicate electrolyte-electrodes interfacial contact at the molecular level, providing continuous Li⁺ transport pathways and promoting uniform Li⁺ deposition, further delivering superior long-term charge/discharge stability (>600 cycles, Coulombic efficiency, >99.8 %) and high capacity retention (80 % after 400 cycles). More practically, the Li|DSICE|LFP-DSICE pouch cells show stable electrochemical performance, excellent flexibility and safety under abusive tests.     

Reversible Li Plating on Graphite Anodes through Electrolyte Engineering for Fast-Charging Batteries

The difficulties to identify the rate-limiting step cause the lithium (Li) plating hard to be completely avoided on graphite anodes during fast charging. Therefore, Li plating regulation and morphology control are proposed to address this issue. Specifically, a Li plating-reversible graphite anode is achieved via a localized high-concentration electrolyte (LHCE) to successfully regulate the Li plating with high reversibility over high-rate cycling. The evolution of solid electrolyte interphase (SEI) before and after Li plating is deeply investigated to explore the interaction between the lithiation behavior and electrochemical interface polarization. Under the fact that Li plating contributes 40 % of total lithiation capacity, the stable LiF-rich SEI renders the anode a higher average Coulombic efficiency (99.9 %) throughout 240 cycles and a 99.95 % reversibility of Li plating. Consequently, a self-made 1.2-Ah LiNi_0.5Mn_0.3Co_0.2O₂ | graphite pouch cell delivers a competitive retention of 84.4 % even at 7.2 A (6 C) after 150 cycles. This work creates an ingenious bridge between the graphite anode and Li plating, for realizing the high-performance fast-charging batteries.     

Low Concentration Sulfolane-Based Electrolyte for High Voltage Lithium Metal Batteries

Electrolyte engineering is crucial for the commercialization of lithium metal batteries. Here, lithium metal is stabilized in the highly reactive sulfolane-based electrolyte under low concentration (0.25 M) for the first time. Inorganic-polymer hybrid solid electrolyte interphase (SEI) with high ionic conductivity, low bonding with lithium and high flexibility enables dense chunky lithium deposition and high plating/stripping efficiency. Low concentration electrolyte (LCE) also enables excellent cycling stability of LiNi_0.5Co_0.2Mn_0.3O₂ (NCM523)/Li cells at 1 C (90.7 % retention after 500 cycles) and 0.3 C (83.3 % retention after 1000 cycles). With a low N/P ratio (≈2), the capacity retention for NCM523/Li cells can achieve 94.3 % after 100 cycles at 0.3 C. Exploring the LCE is of paramount significance because it provides more possibilities of the lithium salt selections, especially reviving some lithium salts that are excluded before due to their low solubility. More importantly, LCE has the significant advantage of commercialization due to its cost-effectiveness.     

Reduction-Tolerance Electrolyte Design for High-Energy Lithium Batteries

Lithium batteries employing Li or silicon (Si) anodes hold promise for the next-generation energy storage systems. However, their cycling behavior encounters rapid capacity degradation due to the vulnerability of solid electrolyte interphases (SEIs). Though anion-derived SEIs mitigate this degradation, the unavoidable reduction of solvents introduces heterogeneity to SEIs, leading to fractures during cycling. Here, we elucidate how the reductive stability of solvents, dominated by the electrophilicity (EPT) and coordination ability (CDA), delineates the SEI formed on Li or Si anodes. Solvents exhibiting lower EPT and CDA demonstrate enhanced tolerance to reduction, resulting in inorganic-rich SEIs with homogeneity. Guided by these criteria, we synthesized three promising solvents tailored for Li or Si anodes. The decomposition of these solvents is dictated by their EPTs under similar solvation structures, imparting distinct characteristics to SEIs and impacting battery performance. The optimized electrolyte, 1 M lithium bis(fluorosulfonyl)imide (LiFSI) in N-Pyrrolidine-trifluoromethanesulfonamide (TFSPY), achieves 600 cycles of Si anodes with a capacity retention of 81 % (1910 mAh g⁻¹). In anode-free Cu||LiNi_0.5Co_0.2Mn_0.3O₂ (NCM523) pouch cells, this electrolyte sustains over 100 cycles with an 82 % capacity retention. These findings illustrate that reducing solvent decomposition benefits SEI formation, offering valuable insights for the designing electrolytes in high-energy lithium batteries.     

Anion-modulated Ion Conductor with Chain Conformational Transformation for stabilizing Interfacial Phase of High-Voltage Lithium Metal Batteries

In solid-state lithium metal batteries (SSLMBs), the inhomogeneous electrolyte-electrode interphase layer aggravates the interfacial stability, leading to discontinuous interfacial ion/charge transport and continuous degradation of the electrolyte. Herein, we constructed an anion-modulated ionic conductor (AMIC) that enables in situ construction of electrolyte/electrode interphases for high-voltage SSLMBs by exploiting conformational transitions under multiple interactions between polymer and lithium salt anions. Anions modulate the decomposition behavior of supramolecular poly (vinylene carbonate) (PVC) at the electrode interface by changing the spatial conformation of the polymer chains, which further enhances ion transport and stabilizes the interfacial morphology. In addition, the AMIC weakens the “Li⁺-solvation” and increases Li⁺ vehicle sites, thereby enhancing the lithium-ion transport number (t_Li⁺=~0.67). Consequently, Li || LiNi_0.8Co_0.1Mn_0.1O₂ cell maintains about 85 % capacity retention and Coulombic efficiency >99.8 % in 200 cycles at a charge cut-off voltage of 4.5 V. This study provides a new understanding of lithium salt anions regulating polymer chain segment behavior in the solid-state polymer electrolyte (SPE) and highlights the importance of the ion environment in the construction of interfacial phases and ionic conduction.     

Mitigating Electron Leakage of Solid Electrolyte Interface for Stable Sodium-Ion Batteries

The interfacial stability is highly responsible for the longevity and safety of sodium ion batteries (SIBs). However, the continuous solid-electrolyte interphase(SEI) growth would deteriorate its stability. Essentially, the SEI growth is associated with the electron leakage behavior, yet few efforts have tried to suppress the SEI growth, from the perspective of mitigating electron leakage. Herein, we built two kinds of SEI layers with distinct growth behaviors, via the additive strategy. The SEI physicochemical features (morphology and componential information) and SEI electronic properties (LUMO level, band gap, electron work function) were investigated elaborately. Experimental and calculational analyses showed that, the SEI layer with suppressed growth delivers both the low electron driving force and the high electron insulation ability. Thus, the electron leakage is mitigated, which restrains the continuous SEI growth, and favors the interface stability with enhanced electrochemical performance.     

Intrinsic Solubilization of Lithium Nitrate in Ester Electrolyte by Multivalent Low-Entropy-Penalty Design for Stable Lithium-Metal Batteries

LiNO₃ is a remarkable additive that can dramatically enhance the stability of ether-based electrolytes at lithium metal anodes. However, it has long been constrained by its incompatibility with commercially used ester electrolytes. Herein, we correlated the fundamental role of entropy with the limited LiNO₃ solubility and proposed a new low-entropy-penalty design that achieves high intrinsic LiNO₃ solubility in ester solvents by employing multivalent linear esters. This strategy is conceptually different from the conventional enthalpic methods that relies on extrinsic high-polarity carriers. In this way, LiNO₃ can directly interact with the primary ester solvents and fundamentally alters the electrolyte properties, resulting in substantial improvements in lithium-metal batteries with high Coulombic efficiency and cycling stability. This work illustrates the significance of regulating the solvation entropy for high-performance electrolyte design.     

40 Years of Low-Temperature Electrolytes for Rechargeable Lithium Batteries

Rechargeable lithium batteries are one of the most appropriate energy storage systems in our electrified society, as virtually all portable electronic devices and electric vehicles today rely on the chemical energy stored in them. However, sub-zero Celsius operation, especially below −20 °C, remains a huge challenge for lithium batteries and greatly limits their application in extreme environments. Slow Li⁺ diffusion and charge transfer kinetics have been identified as two main origins of the poor performance of RLBs under low-temperature conditions, both strongly associated with the liquid electrolyte that governs bulk and interfacial ion transport. In this review, we first analyze the low-temperature kinetic behavior and failure mechanism of lithium batteries from an electrolyte standpoint. We next trace the history of low-temperature electrolytes in the past 40 years (1983–2022), followed by a comprehensive summary of the research progress as well as introducing the state-of-the-art characterization and computational methods for revealing their underlying mechanisms. Finally, we provide some perspectives on future research of low-temperature electrolytes with particular emphasis on mechanism analysis and practical application.     

Solid-Electrolyte Interphase Chemistries Towards High-Performance Aqueous Zinc Metal Batteries

Aqueous zinc metal batteries (AZMBs) are deemed a promising technology for electrochemical energy storage due to their high safety, low cost, and high energy density. However, AZMBs still suffer from severe side reactions, including Zn dendrite formation and intrinsic hydrogen evolution reaction. In contrast to the solid-electrolyte interphase (SEI) layer that stabilizes Li/Na/K metal anodes in organic electrolytes, it is difficult to form an SEI layer on the Zn surface because of the difficulty in decomposing the salt anions within the narrow electrochemical potential window of water. A team from the University of Adelaide reports a novel pure or hybrid electrolyte with H₂O by using dimethyl methylphosphonate (DMMP) as solvent or co-solvent to construct a uniform and stable phosphate-based SEI layer (ZnP₂O₆ and Zn₃(PO₄)₂). As a result, high Coulombic efficiencies and improved capacity retentions are obtained.     

High-Entropy Lithium Argyrodite Solid Electrolytes Enabling Stable All-Solid-State Batteries

Superionic solid electrolytes (SEs) are essential for bulk-type solid-state battery (SSB) applications. Multicomponent SEs are recently attracting attention for their favorable charge-transport properties, however a thorough understanding of how configurational entropy (ΔS_conf) affects ionic conductivity is lacking. Here, we successfully synthesized a series of halogen-rich lithium argyrodites with the general formula Li_5.5PS_4.5Cl_xBr_1.5-x (0≤x≤1.5). Using neutron powder diffraction and ³¹P magic-angle spinning nuclear magnetic resonance spectroscopy, the S²⁻/Cl⁻/Br⁻ occupancy on the anion sublattice was quantitatively analyzed. We show that disorder positively affects Li-ion dynamics, leading to a room-temperature ionic conductivity of 22.7 mS cm⁻¹ (9.6 mS cm⁻¹ in cold-pressed state) for Li_5.5PS_4.5Cl_0.8Br_0.7 (ΔS_conf=1.98R). To the best of our knowledge, this is the first experimental evidence that configurational entropy of the anion sublattice correlates with ion mobility. Our results indicate the possibility of improving ionic conductivity in ceramic ion conductors by tailoring the degree of compositional complexity. Moreover, the Li_5.5PS_4.5Cl_0.8Br_0.7 SE allowed for stable cycling of single-crystal LiNi_0.9Co_0.06Mn_0.04O₂ (s-NCM90) composite cathodes in SSB cells, emphasizing that dual-substituted lithium argyrodites hold great promise in enabling high-performance electrochemical energy storage.     

Li Plating Regulation on Fast-Charging Graphite Anodes by a Triglyme-LiNO3 Synergistic Electrolyte Additive

Graphite anodes are prone to dangerous Li plating during fast charging, but the difficulty to identify the rate-limiting step has made a challenging to eliminate Li plating thoroughly. Thus, the inherent thinking on inhibiting Li plating needs to be compromised. Herein, an elastic solid electrolyte interphase (SEI) with uniform Li-ion flux is constructed on graphite anode by introducing a triglyme (G3)-LiNO₃ synergistic additive (GLN) to commercial carbonate electrolyte, for realizing a dendrite-free and highly-reversible Li plating under high rates. The cross-linked oligomeric ether and Li₃N particles derived from the GLN greatly improve the stability of the SEI before and after Li plating and facilitate the uniform Li deposition. When 51 % of lithiation capacity is contributed from Li plating, the graphite anode in the electrolyte with 5 vol.% GLN achieved an average 99.6 % Li plating reversibility over 100 cycles. In addition, the 1.2-Ah LiFePO₄ | graphite pouch cell with GLN-added electrolyte stably operated over 150 cycles at 3 C, firmly demonstrating the promise of GLN in commercial Li-ion batteries for fast-charging applications.     

Directing (110) Oriented Lithium Deposition through High-flux Solid Electrolyte Interphase for Dendrite-free Lithium Metal Batteries

Controlling lithium (Li) electrocrystallization with preferred orientation is a promising strategy to realize highly reversible Li metal batteries (LMBs) but lack of facile regulation methods. Herein, we report a high-flux solid electrolyte interphase (SEI) strategy to direct (110) preferred Li deposition even on (200)-orientated Li substrate. Bravais rule and Curie-Wulff principle are expanded in Li electrocrystallization process to decouple the relationship between SEI engineering and preferred crystal orientation. Multi-spectroscopic techniques combined with dynamics analysis reveal that the high-flux CF₃Si(CH₃)₃ (F₃) induced SEI (F₃-SEI) with high LiF and −Si(CH₃)₃ contents can ingeniously accelerate Li⁺ transport dynamics and ensure the sufficient Li⁺ concentration below SEI to direct Li (110) orientation. The induced Li (110) can in turn further promote the surface migration of Li atoms to avoid tip aggregation, resulting in a planar, dendrite-free morphology of Li. As a result, our F₃-SEI enables ultra-long stability of Li||Li symmetrical cells for more than 336 days. Furthermore, F₃-SEI modified Li can significantly enhance the cycle life of Li||LiFePO₄ and Li||NCM811 coin and pouch full cells in practical conditions. Our crystallographic strategy for Li dendrite suppression paves a path to achieve reliable LMBs and may provide guidance for the preferred orientation of other metal crystals.     

Reactive Magnesium Nitride Additive: A Drop-in Solution for Lithium/Garnet Wetting in All-Solid-State Batteries

Garnet oxides such as Li_6.4La₃Zr_1.4Ta_0.6O₁₂ (LLZTO) are promising solid electrolyte materials for all-solid-state lithium-metal batteries because of high ionic conductivity, low electronic leakage, and wide electrochemical stability window. While LLZTO has been frequently discussed to be stable against lithium metal anode, it is challenging to achieve and maintain good solid-on-solid wetting at the metal/ceramic interface in both processing and extended electrochemical cycling. Here we address the challenge by a powder-form magnesium nitride additive, which reacts with the lithium metal anode to produce well-dispersed lithium nitride. The in situ formed lithium nitride promotes reactive wetting at the Li/LLZTO interface, which lowers interfacial resistance, increases critical current density (CCD), and improves cycling stability of the electrochemical cells. The additive recipe has been diversified to titanium nitride, zirconium nitride, tantalum nitride, and niobium nitride, thus supporting the general concept of reactive dispersion-plus-wetting. Such a design can be extended to other solid-state devices for better functioning and extended cycle life.     

Constructing Solid Electrolyte Interphase for Aqueous Zinc Batteries

Problems of zinc anode including dendrite and hydrogen evolution seriously degrade the performance of zinc batteries. Solid electrolyte interphase (SEI), which plays a key role in achieving high reversibility of lithium anode in aprotic organic solvent, is also beneficial to performance improvement of zinc anode in aqueous electrolyte. However, various studies about interphase for zinc electrode is quite fragmented, and lack of deep understanding on root causes or general design rules for SEI construction. And water molecules with high reactivity brings serious challenge to the effective SEI construction. Here, we reviewed the brief development history of zinc batteries firstly, then summarized the approaches to construct SEI in aqueous electrolyte. Furthermore, the formation mechanisms behind approaches are systematically analyzed, together with discussion on the SEI components and evaluation on electrochemical performance of zinc anode with various types of SEI. Meanwhile, the challenge between lab and industrialization are also discussed.     

Dynamic Zn/Electrolyte Interphase and Enhanced Cation Transfer of Sol Electrolyte for All-Climate Aqueous Zinc Metal Batteries

Zn metal as one of the promising anodes of aqueous batteries possesses notable advantages, but it faces severe challenges from severe side reactions and notorious dendrite growth. Here, ultrathin nanosheets of α-zirconium phosphate (ZrP) are explored as an electrolyte additive. The nanosheets not only create a dynamic and reversible interphase on Zn but also promote the Zn²⁺ transportation in the electrolyte, especially in the outer Helmholtz plane near ZrP. Benefited from the enhanced kinetics and dynamic interphase, the pouch cells of Zn||LiMn₂O₄ using this electrolyte remarkably improve electrochemical performance under harsh conditions, i.e. Zn powders as the Zn anode, high mass loading, and wide temperatures. The results expand the materials available for this dynamic interphase, provide an insightful understanding of the enhanced charge transfer in the electrolyte, and realize the combination of dynamic interphase and enhanced kinetics for all-climate performance.     

A Stable Solid Polymer Electrolyte for Lithium Metal Battery with Electronically Conductive Fillers

Electronic conduction in solid-polymer electrolytes is generally not desired, which causes leakage of electrons or energy loss, and the electronically conductive domains at electrode-electrolyte interfaces can lead to continuous decomposition of electrolytes and shorting issues. However, it is noticed in this work that in an insulating matrix, the conductive domains at certain aspects could also have positive effects on the electrolyte performance with proper control. This work evaluates the limitation and benefits of electronically conductive domains in a solid-polymer electrolyte system and discusses the approach to improve the electrolyte physicochemical properties with densified local electric field distribution, enhanced bulk dielectric property, and charge transfer. By deliberately introducing the conductive domains in a regular solid-polymer electrolyte, stable cycle life, low overpotential, and promising full cell performance could be achieved.     

Unraveling the Solvent Effect on Solid-Electrolyte Interphase Formation for Sodium Metal Batteries

Ether-based electrolytes are considered as an ideal electrolyte system for sodium metal batteries (SMBs) due to their superior compatibility with the sodium metal anode (SMA). However, the selection principle of ether solvents and the impact on solid electrolyte interphase formation are still unclear. Herein, we systematically compare the chain ether-based electrolyte and understand the relationship between the solvation structure and the interphasial properties. The linear ether solvent molecules with different terminal group lengths demonstrate remarkably distinct solvation effects, thus leading to different electrochemical performance as well as deposition morphologies for SMBs. Computational calculations and comprehensive characterizations indicate that the terminal group length significantly regulates the electrolyte solvation structure and consequently influences the interfacial reaction mechanism of electrolytes on SMA. Cryogenic electron microscopy clearly reveals the difference in solid electrolyte interphase in various ether-based electrolytes. As a result, the 1,2-diethoxyethane-based electrolyte enables a high Coulombic efficiency of 99.9 %, which also realizes the stable cycling of Na||Na₃V₂(PO₄)₃ full cell with a mass loading of ≈9 mg cm⁻² over 500 cycles.