Hybrid porous Ni(OH)2-MnO2 nanosheets/plasma-grafted MWCNTs for boosted supercapacitor performance

The utilization of nickel hydroxide and manganese dioxide solely as high-performance supercapacitive materials is hindered by their low capacitance retention and electrical conductivity. As Ni(OH)₂ and MnO₂ give a synergistic effect, porous Ni(OH)₂-MnO₂ nanosheets with a thickness of 9 nm are successfully grown on carbon fiber (CF) via a single-step hydrothermal co-deposition method. Multi-walled carbon nanotubes (CNT) are grafted with maleic anhydride (MA) through plasma-grafted process, followed by thiol-ene reaction to synthesize CNT-MA−S (CMS) to increase their aqueous dispersion behavior. The electrochemical properties of Ni(OH)₂-MnO₂ are further enhanced by dip-coating CMS on nanosheets. The composition and morphology of CMS and Ni(OH)₂-MnO₂ nanosheets are characterized using scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR), electron spectroscopy for chemical analysis (ESCA), transmission electron microscopy (TEM), thermogravimetric analyses (TGA), nuclear magnetic resonance (NMR), and Raman spectroscopy. The electrochemical characteristics of fabricated electrodes are analyzed using cyclic voltammetry and chronopotentiometry methods. CF−Ni(OH)₂-MnO₂/CMS electrode is successfully synthesized without using any binder, exhibited ultrahigh specific capacitance (2049 F g⁻¹ at a current density of 1 A g⁻¹), and excellent capacitance retention (>80 %) at 2 A g⁻¹ charge/discharge rate after 5000 cycles.     

β‐Co(OH)2 Nanosheets: A Superior Pseudocapacitive Electrode for High‐Energy Supercapacitors

In this work, β‐Co(OH)₂ nanosheets are explored as efficient pseudocapacitive materials for the fabrication of 1.6 V class high‐energy supercapacitors in asymmetric fashion. The as‐synthesized β‐Co(OH)₂ nanosheets displayed an excellent electrochemical performance owing to their unique structure, morphology, and reversible reaction kinetics (fast faradic reaction) in both the three‐electrode and asymmetric configuration (with activated carbon, AC). For example, in the three‐electrode set‐up, β‐Co(OH)₂ exhibits a high specific capacitance of ∼675 F g⁻¹ at a scan rate of 1 mV s⁻¹. In the asymmetric supercapacitor, the β‐Co(OH)₂∥AC cell delivers a maximum energy density of 37.3 Wh kg⁻¹ at a power density of 800 W kg⁻¹. Even at harsh conditions (8 kW kg⁻¹), an energy density of 15.64 Wh kg⁻¹ is registered for the β‐Co(OH)₂∥AC assembly. Such an impressive performance of β‐Co(OH)₂ nanosheets in the asymmetric configuration reveals the emergence of pseudocapacitive electrodes towards the fabrication of high‐energy electrochemical charge storage systems.     

Generalized Low‐Temperature Fabrication of Scalable Multi‐Type Two‐Dimensional Nanosheets with a Green Soft Template

Two‐dimensional nanosheets with high specific surface areas and fascinating physical and chemical properties have attracted tremendous interests because of their promising potentials in both fundamental research and practical applications. However, the problem of developing a universal strategy with a facile and cost‐effective synthesis process for multi‐type ultrathin 2 D nanostructures remains unresolved. Herein, we report a generalized low‐temperature fabrication of scalable multi‐type 2 D nanosheets including metal hydroxides (such as Ni(OH)₂, Co(OH)₂, Cd(OH)₂, and Mg(OH)₂), metal oxides (such as ZnO and Mn₃O₄), and layered mixed transition‐metal hydroxides (Ni‐Co LDH, Ni‐Fe LDH, Co‐Fe LDH, and Ni‐Co‐Fe layered ternary hydroxides) through the rational employment of a green soft‐template. The synthesized crystalline inorganic nanosheets possess confined thickness, resulting in ultrahigh surface atom ratios and chemically reactive facets. Upon evaluation as electrode materials for pseudocapacitors, the Ni‐Co LDH nanosheets exhibit a high specific capacitance of 1087 F g^?1 at a current density of 1 A g^?1, and excellent stability, with 103 % retention after 500 cycles. This strategy is facile and scalable for the production of high‐quality ultrathin crystalline inorganic nanosheets, with the possibility of extension to the preparation of other complex nanosheets.     

Exfoliated nickel hydroxide nanosheets for urea electrolysis

Two-dimensional nickel hydroxide nanosheets were synthesized by exfoliating surfactant intercalated layered nickel hydroxides and developed as electrocatalysts for urea electro-oxidation. The electro-oxidation of urea on Ni(OH)₂ nanosheet modified electrodes shows a decrease of 100 mV in overpotential and an enhancement in current density, which reaches ca.154 mA cm^{− 2} mg^{− 1}, by a factor of ca. 170 compared to bulk Ni(OH)₂ powder modified electrodes. The Ni(OH)₂ nanosheets have promising applications in urea-rich wastewater remediation, hydrogen production, electrochemical sensors, and fuel cells due to their ability to promote the urea electrolysis reaction.     

在Ni/HZSM-5催化剂上低温水蒸汽重整生物油制氢

We investigated high catalytic activity of Ni/HZSM-5 catalysts synthesized by the impregna-tion method, which was successfully applied for low-temperature steam reforming of bio-oil. The influences of the catalyst composition, reforming temperature and the molar ratio of steam to carbon fed on the stream reforming process of bio-oil over the Ni/HZSM-5 catalysts were investigated in the reforming reactor. The promoting effects of current passing through the catalyst on the bio-oil reforming were also studied using the electrochemical catalytic re-forming approach. By comparing Ni/HZSM-5 with commonly used Ni/Al₂O₃ catalysts, the Ni₂₀/ZSM catalyst with Ni-loading content of about 20% on the HZSM-5 support showed the highest catalytic activity. Even at 450 oC, the hydrogen yield of about 90% with a near complete conversion of bio-oil was obtained using the Ni₂₀/ZSM catalyst. It was found that the performance of the bio-oil reforming was remarkably enhanced by the HZSM-5 supporter and the current through the catalyst. The features of the Ni/HZSM-5 catalysts were also investigated via X-ray diffraction, inductively coupled plasma and atomic emission spectroscopy, hydrogen temperature-programmed reduction, and Brunauer-Emmett-Teller methods.     

Ultrathin Hexagonal Hybrid Nanosheets Synthesized by Graphene Oxide‐Assisted Exfoliation of β‐Co(OH)2 Mesocrystals

In the present study, we report the synthesis of a high‐quality, single‐crystal hexagonal β‐Co(OH)₂ nanosheet, exhibiting a thickness down to ten atomic layers and an aspect ratio exceeding 900, by using graphene oxide (GO) as an exfoliant of β‐Co(OH)₂ nanoflowers. Unlike conventional approaches using ionic precursors in which morphological control is realized by structure‐directing molecules, the β‐Co(OH)₂ flower‐like superstructures were first grown by a nanoparticle‐mediated crystallization process, which results in large 3D superstructure consisting of ultrathin nanosheets interspaced by polydimethoxyaniline (PDMA). Thereafter, β‐Co(OH)₂ nanoflowers were chemically exfoliated by surface‐active GO under hydrothermal conditions into unilamellar single‐crystal nanosheets. In this reaction, GO acts as a two‐dimensional (2D) amphiphile to facilitate the exfoliation process through tailored interactions between organic and inorganic molecules. Meanwhile, the on‐site conjugation of GO and Co(OH)₂ promotes the thermodynamic stability of freestanding ultrathin nanosheets and restrains further growth through Oswald ripening. The unique 2D structure combined with functionalities of the hybrid ultrathin Co(OH)₂ nanosheets on rGO resulted in a remarkably enhanced lithium‐ion storage performance as anode materials, maintaining a reversible capacity of 860 mA h g^?1 for as many as 30 cycles. Since mesocrystals are ubiquitous and rich in morphological diversity, the strategy of the GO‐assisted exfoliation of mesocrystals developed here provides an opportunity for the synthesis of new functional nanostructures that could bear importance in clean renewable energy, catalysis, photoelectronics, and photonics.     

碱金属和碱土金属促进的Ni/SiO2催化剂上甲烷的二氧化碳重整制合成气

Ni/SiO2 catalysts promoted by alkali metals K and Cs or alkaline earth metals Mg, Ca, Sr and Ba were prepared, characterized by H2-TPR and XRD, and used for the production of synthesis gas via methane reforming with CO2. Though K and Cs promoted Ni catalysts could eliminate coke deposition, the reforming activity of these promoted catalysts was decreased heavily. Mg and Ca promoted Ni/SiO2 catalysts exhibited excellent coke resistance ability with minor loss of the reforming activity of Ni/SiO2. Ba showed poor coke resistance ability and small amount of Sr increased the formation of coke. The possible mechanism of these promoters was discussed.     

Hydrogen transport through Pd-Ni alloy electrodeposited on Pd substrate

Hydrogen transport through a Pd-Ni alloy electrodeposited on a Pd substrate (Pd-Ni/Pd bilayer symmetric electrode) has been investigated using cyclic voltammetry and a.c. impedance spectroscopy combined with the electrochemical hydrogen permeation method. The permeation build-up current transients and the measured impedance spectra were analyzed using the time-lag method for the bilayer electrode and a complex non-linear least squares data-fitting method based upon the derived Faradaic admittance for the hydrogen absorption into and diffusion through the bilayer electrode under the permeable boundary condition, respectively. The value of the hydrogen diffusivity in the Pd-Ni layer was lower than that in the Pd layer. Furthermore, the values of the charge transfer resistance and equilibrium absorption constant for the Pd-Ni/Pd bilayer electrode were higher than those for the Pd single layer electrode. From the experimental results, the role of the thin Ni(OH)₂ film formed on the Pd-Ni layer surface in the hydrogen transport through the Pd-Ni/Pd bilayer electrode is discussed in terms of its passivating effect and extremely large hydrogen solubility. Received: 22 January 1997 / Accepted: 15 April 1997     

Vertically Aligned Porous Nickel(II) Hydroxide Nanosheets Supported on Carbon Paper with Long‐Term Oxygen Evolution Performance

Vertically aligned Ni(OH)₂ nanosheets were grown on carbon paper (CP) current collectors through a simple and cost‐effective hydrothermal approach. The as‐grown nanosheets are porous and highly crystallized. If used as a monolithic electrode for electrochemical water oxidation in alkaline solution, the carbon paper supported Ni(OH)₂ nanosheets [CP@Ni(OH)₂] exhibit high electrocatalytic activity and excellent long‐term stability. The electrode can attain an anodic current density of 20 mA cm⁻² at a low overpotential of 338 mV, comparable to that of state‐of‐the‐art RuO₂ nanocatalysts supported on CP (CP/RuO₂) with the same catalyst loading. Significantly, CP@Ni(OH)₂ shows much better long‐term stability than CP/RuO₂ upon continuous galvanostatic electrolysis, particularly at a high industry‐relevant current density such as 100 mA cm⁻². CP@Ni(OH)₂ can sustain water oxidation at 100 mA cm⁻² for 50 h without any degradation, whereas the performance of CP/RuO₂ is much poorer and deteriorates gradually over time. CP@Ni(OH)₂ electrodes hold substantial promise for use as low‐costing water oxidation anodes in electrolyzers.     

Nickel Doping in Atomically Thin Tin Disulfide Nanosheets Enables Highly Efficient CO2 Reduction

Engineering electronic properties by elemental doping is a direct strategy to design efficient catalysts towards CO₂ electroreduction. Atomically thin SnS₂ nanosheets were modified by Ni doping for efficient electroreduction of CO₂. The introduction of Ni into SnS₂ nanosheets significantly enhanced the current density and Faradaic efficiency for carbonaceous product relative to pristine SnS₂ nanosheets. When the Ni content was 5 atm %, the Ni‐doped SnS₂ nanosheets achieved a remarkable Faradaic efficiency of 93 % for carbonaceous product with a current density of 19.6 mA cm^?2 at ?0.9 V vs. RHE. A mechanistic study revealed that the Ni doping gave rise to a defect level and lowered the work function of SnS₂ nanosheets, resulting in the promoted CO₂ activation and thus improved performance in CO₂ electroreduction.     

Controllable synthesis of NiC2O4·2H2O nanorods precursor and applications in the synthesis of nickel-based nanostructures

A controllable synthesis of NiC₂O₄·2H₂O nanorods precursor was obtained via the microemulsion-mediated solvothermal method and a further synthesis of β-Ni(OH)₂ nanorods, nickel oxide (NiO) sub-microtubes, Ni nanospheres and flower-like nickel complexes nanostructures by using the precursor. The morphologies and crystalline structures were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and the X-ray powder diffraction (XRD). The morphologies and sizes of the precursors can be readily tuned by adjusting experimental parameters of the reverse microemulsion system. The synthesized β-Ni(OH)₂ nanorods composed of fine nanosheets shown excellent electrochemical performance as an electrode material in rechargeable battery systems.     

NiO纳米片和多孔纳米片自组装的空心微球的无模板水热法制备与磁学性质

报道一种非常简单的制备NiO和Ni(OH)₂空心微球的无模板水热法, 即通过NiCl₂与氨水在140 ℃水热反应12 h, 制备了Ni(OH)₂纳米片自组装的空心微球, 经400 ℃热处理2 h得到了NiO空心微球. 采用X射线衍射仪、扫描电镜和透射电子显微镜对产物进行表征, 并在室温下测试了它的磁学性能, 结果表明, Ni(OH)₂空心微球的直径约为3～4 μm, 它是由尺寸1.1～1.3 μm左右的六方相结构的Ni(OH)₂纳米片组装而成; NiO空心微球是由立方相纳米片和多孔纳米片组装而成, 它具有弱的铁磁性, 其矫顽力为583 Oe, 剩余磁化强度为0.213 emu/g. 研究了氨在Ni(OH)₂纳米片的形成与组装过程中的作用, 提出了可能的生长机理.     

Fabrication of Acid Violet 34/Nickel Hydroxide Ultrathin Film and Its Electrocatalytic Performance for Glucose

This article reports the fabrication of Acid Violet 34 (AV34)/nickel hydroxide nanosheets ultrathin film on the glassy carbon electrode (GCE) via the electrostatic layer‐by‐layer (LBL) technique, and its electrocatalytic oxidation for glucose was demonstrated. UV‐vis absorption and electrochemical impedance spectra indicate the uniform deposition of the LBL film, with a continuous and smooth film surface observed by SEM and AFM. The electrochemical performance of the ultrathin film was studied by cyclic voltammetry and chronoamperometry. The (AV34/Ni(OH)₂)₅ ultrathin film modified electrode displays a fast direct electron transfer attributed to the Ni²⁺/Ni³⁺ redox couple as well as remarkable electrocatalytic activity towards the oxidation of glucose. The linear response was obtained in the range 0.5–13.5 mM (R=0.9994) with a low detection limit (14 µM), high sensitivity (25.9 µA mM^?1 cm^?2), rapid response (less than 1 s) and excellent anti‐interference properties to the species including ascorbic acid (AA), uric acid (UA), acetamidophenol (AP) and structurally related sugars. Therefore, the AV34/Ni(OH)₂ ultrathin film can be potentially used as a feasible electrochemical sensor for the determination of glucose.     

Efficient electrocatalytic oxygen evolution at ultra-high current densities over 3D Fe,N doped Ni(OH)2 nanosheets

Developing highly efficient nickel or iron based hydroxide electrocatalysts is primary essential but challenging for oxygen evolution reaction (OER) at ultra-high current densities. Herein, we developed a facile method to prepare nitrogen and iron doped nickel(II) hydroxide nanosheets on self-supported conductive nickel foam (denoted as Fe,N-Ni(OH)₂/NF) through ammonia hydrothermal and impregnation methods. Owing to the optimization of the electronic structure by nitrogen doping and the strong synergistic effect between Fe and Ni(OH)₂, the three-dimensional (3D) Fe,N-Ni(OH)₂/NF nanosheets delivered superior electrocatalytic OER performances in basic solution with low potentials of 1.57 V and 1.59 V under 500 mA/cm² and 1000 mA/cm² respectively and robust operation for 10 h with ignored activity decay, comparing well with the potentials of previously reported NiFe based electrocatalysts as well as the benchmark commercial Ir/C/NF. In-situ Raman spectroscopy revealed that the main active species were NiOOH during the OER process. The present results are expected to provide new insights into the study of OER process towards ultra-high current densities.     

炭载Pd-Ni合金纳米粒子对甲酸的电催化氧化

通过液相还原法制备了具有不同原子比例的Pd-Ni/C催化剂,并且使用X射线衍射（XRD）、透射电子显微镜(TEM)和X射线光电子能谱(XPS) 等表征手段对制备的催化剂进行了表征,总结了Ni的掺杂对Pd-Ni合金纳米粒子的尺寸及晶体结构的影响。电化学测试结果表明：适量的Ni的掺杂不但能够增强催化剂对甲酸催化氧化的活性,而且还能够提高催化剂的稳定性。因此,Pd-Ni/C催化剂是一类具有潜在应用前景的直接甲酸燃料电池阳极催化剂     

A Co(OH)2−graphene nanosheets composite as a high performance anode material for rechargeable lithium batteries

A Co(OH)₂?graphene nanosheets (Co(OH)₂?GNS) composite as a high performance anode material was firstly prepared through a simultaneous hydrothermal method. The structure, morphology and electrochemical performance of the obtained samples were systematically investigated by X-ray diffraction (XRD), transmission electron microscope (TEM) and electrochemical measurements. According to the TEM analysis, the surface of the Co(OH)₂ is surrounded with GNS in the Co(OH)₂?GNS composite. The specific discharge (lithiation) and charge (delithiation) capacities of Co(OH)₂?GNS attain to 1599 and 1120 mAh/g at a current density of 200 mA/g in the first cycle, respectively. After 30 cycles, the reversible capacity of Co(OH)₂?GNS is still 910 mAh/g with the retention of 82%. The particular structure of Co(OH)₂ particles surrounded by the GNS could limit the volume change during cycling and provide an excellent electronic conduction pathway, which could be the main reason for the remarkable improvement of electrochemical performance.     

Partially Pyrolyzed Binary Metal–Organic Framework Nanosheets for Efficient Electrochemical Hydrogen Peroxide Synthesis

Herein, we developed a partially controlled pyrolysis strategy to create evenly distributed NiO nanoparticles within NiFe-MOF nanosheets (MOF NSs) for electrochemical synthesis of H₂O₂ by a two-electron oxygen reduction reaction (ORR). The elemental Ni can be partially transformed to NiO and uniformly distributed on the surface of the MOF NSs, which is crucial for the formation of the particular structure. The optimized MOF NSs-300 exhibits the highest activity for ORR with near-zero overpotential and excellent H₂O₂ selectivity (ca. 99 %) in 0.1 m KOH solution. A high-yield H₂O₂ production rate of 6.5 mol g_cat⁻¹ h⁻¹ has also been achieved by MOF NSs-300 in 0.1 m KOH and at 0.6 V (vs. RHE). In contrast to completely pyrolyzed products, the enhanced catalytic activities of partially pyrolyzed MOF NSs-300 originates mainly from the retained MOF structure and the newly generated NiO nanoparticles, forming the coordinatively unsaturated Ni atoms and tuning the performance towards electrochemical H₂O₂ synthesis.     

Sustainable Production of Synthesis Gases via State of the Art Metal Supported Catalytic Systems: An Overview

Dry reforming of methane (CH₄) with carbon dioxide (CO₂) catalysts produces synthesis gas at atmospheric pressure. Synthesis gas is important feed stock to chemical and petrochemical industries to produce chemicals such as methanol and ammonia. It is also a source of hydrogen that is potential to fuel cells. Reforming reactions have also environmental benefit as CO₂ and CH₄, which are classified as green house gases, that cause global warming, are consumed. Reforming with CO₂ is attractive method since it can be employed in areas where water is not available. Considerable efforts have been made to obtain catalysts for dry reforming to achieve both high activity and good stability. In this review, we will take an over view of the dry reforming process and concentrate on the various catalysts used in the process, in general and Ni/Al₂O₃ catalytic system in particular and report the available data in the literature and the present state of the art for this process.     

Partially Pyrolyzed Binary Metal–Organic Framework Nanosheets for Efficient Electrochemical Hydrogen Peroxide Synthesis

Herein, we developed a partially controlled pyrolysis strategy to create evenly distributed NiO nanoparticles within NiFe‐MOF nanosheets (MOF NSs) for electrochemical synthesis of H₂O₂ by a two‐electron oxygen reduction reaction (ORR). The elemental Ni can be partially transformed to NiO and uniformly distributed on the surface of the MOF NSs, which is crucial for the formation of the particular structure. The optimized MOF NSs‐300 exhibits the highest activity for ORR with near‐zero overpotential and excellent H₂O₂ selectivity (ca. 99 %) in 0.1 m KOH solution. A high‐yield H₂O₂ production rate of 6.5 mol g_cat^?1 h^?1 has also been achieved by MOF NSs‐300 in 0.1 m KOH and at 0.6 V (vs. RHE). In contrast to completely pyrolyzed products, the enhanced catalytic activities of partially pyrolyzed MOF NSs‐300 originates mainly from the retained MOF structure and the newly generated NiO nanoparticles, forming the coordinatively unsaturated Ni atoms and tuning the performance towards electrochemical H₂O₂ synthesis.     

Nickel Hydroxide and Intercalated Graphene with Ionic Liquid Nanocomposite‐modified Electrode for Sensing of Glucose

A novel non‐enzymatic glucose sensor based on nickel hydroxide and intercalated graphene with ionic liquid (G‐IL) nanocomposite modified glass carbon electrode was fabricated. Scanning electron microscope, Fourier transform infrared spectra and energy dispersive X‐ray spectroscopy of the nanocomposite confirmed the morphology and ingredient of Ni(OH)₂ as well as G‐IL. Moreover, experimental results of cyclic voltammetry, electrochemical impedance spectroscopy and chronoamperometry indicated the sensing properties of Ni(OH)₂ at Ni(OH)₂/G‐IL modified electrode towards the typical electrocatalytic oxidation process of glucose at 0.43 V in 0.10 M NaOH. The current response was linearly related to glucose concentration in a range from 0.5 to 500 μM with a detection limit of 0.2 μM (S/N = 3) and sensitivity of 647.8 μA mM^?1 cm^?2. The response time of the sensor to glucose was less than 2 s. This work may be expected to develop an excellent electrochemical sensing platform of G‐IL as a catalysis carrier.