An extraordinarily rapid polymerization of vinylpentafluorocyclopropane: highly stereo- and regioselective synthesis of unsaturated fluoropolymers

Vinylpentafluorocyclopropane 1 was prepared from the reaction of 1,1,2-trifluoro-4-bromobutene and hexafluoropropylene oxide at 190 degrees C, following by treatment with KOH. 1 is stable at low temperature (-40 degrees C) for 7 years, but it rearranged readily to 2,3,3,4,4-pentafluorocyclopentene-1, 2, at above 80 degrees C (Ea = 28.7 kcal/mol). Under radical conditions, 1 extraordinarily rapidly polymerizes to give highly crystalline Z-fluoropolyolefin (CF2CF2CF=CHCH2)n, 3, which is very useful for cross-linking and grafting but difficult to obtain by other means. The stereochemistry of 3 was further confirmed by radical addition of iodine to 1 to form Z-ICF2CF2CF=CHCH2I, 4, exclusively. The rapid polymerization with high stereoselectivity and regioselectivity could be rationalized by effects of a favorable polar transition state of a high ring strain and electron-deficient pentafluorocyclopropyl and a relative electron-rich double bond of 1.     

Preparation of highly fluorinated cyclopropanes and ring-opening reactions with halogens

Various highly fluorinated cyclopropanes 1 were prepared by reaction of the appropriate fluorinated olefins with hexafluoropropylene oxide (HFPO) at 180 degrees C. The fluorinated nitrile 1e was converted to the triazine derivatives 2a and 2b by catalysis with Ag(2)O and NH(3)/(CF(3)CO)(2)O, respectively. The fluorinated cyclopropanes reacted with halogens at elevated temperatures to provide the first useful, general synthesis of 1,3-dihalopolyfluoropropanes. At 150-240 degrees C, hexafluorocyclopropane and halogens X(2) produce XCF(2)CF(2)CF(2)X (X = Cl, Br, I) in 50-80% isolated yields. Pentafluorocyclopropanes c-C(3)F(5)Y [Y = Cl, OCF(3), OC(3)F(7) and OCF(2)CF(CF(3))OCF(2)CF(2)Z; Z = SO(2)F, CN, CO(2)Me] react regiospecifically at 150 degrees C to give XCF(2)CF(2)CFXY, c-C(3)F(5)Br reacts regioselectively with Br(2) to give a 16.7:1 mixture of BrCF(2)CF(2)CFBr(2):BrCF(2)CFBrCF(2)Br, whereas c-C(3)F(5)H reacts unselectively with I(2) to produce a statistical 2:1 mixture of ICF(2)CF(2)CFHI:ICF(2)CFHCF(2)I. Tri- and di(pentafluorocyclopropyl) derivatives 2 also undergo ring-opening reaction with halogens to give 16 and 17. Upon treatment of tetrafluorocyclopropanes 1j, 1k, and 1l with Br(2) or I(2), ring opening occurred exclusively at substituted carbons to give XCF(2)CF(2)CXY(2). Thermolysis of the ring-opened product ICF(2)CF(2)CFIOR(F) at 240 degrees C gave R(F)I and ICF(2)CF(2)COF in high yields.     

Layer-by-layer-assembled multilayer films of polyelectrolyte-stabilized surfactant micelles for the incorporation of noncharged organic dyes

Noncharged pyrene molecules were incorporated into multilayer films by first loading pyrene into poly(acrylic acid) (PAA)-stabilized cetyltrimethylammonium bromide (CTAB) micelles (noted as PAA&(Py@CTAB)) and then layer-by-layer (LbL) assembled with poly(diallyldimethylammonium chloride) (PDDA). The stable incorporation of pyrene into multilayer films was confirmed by quartz crystal microbalance (QCM) measurements and UV-vis absorption spectroscopy. The resultant PAA&(Py@CTAB)/PDDA multilayer films show an exponential growth behavior because of the increased surface roughness with increasing number of film deposition cycles. The present study will open a general and cost-effective avenue for the incorporation of noncharged species, such as organic molecules, nanoparticles, and so forth, into LbL-assembled multilayer films by using polyelectrolyte-stabilized surfactant micelles as carriers.     

Preparation of stable and metastable coordination compounds: insight into the structural, thermodynamic, and kinetic aspects of the formation of coordination polymers

The reaction of ZnI2 and pyrimidine in acetonitrile results in the formation of the 1:2 compound ZnI2(pyrimidine)2 (1), which consists of discrete tetrahedral building blocks. Slow heating of 1 at 1 degrees C/min leads to its transformation into the ligand-deficient intermediate 1:1 compound ZnI2(pyrimidine) (3), which upon further heating decomposes into the most ligand-deficient 2:1 compound (ZnI2)2(pyrimidine) (4). In contrast, the 2:3 compound (ZnI2)2(pyrimidine)3 (2) is formed as an intermediate by decomposing 1 using a faster heating rate of 8 degrees C/min. Compound 2 consists of oligomeric units in which each ZnI2 unit is coordinated by two iodine atoms and one bridging and one terminal pyrimidine ligand. The crystal structure of compound 3 is built up of ZnI2 units, which are connected by the ligands into chains. For the thermal transformation of 1 into 3 via 2 as the intermediate, a smooth reaction pathway is found in the crystal structure, for which only small translational and rotational changes are needed. The metastable solvated compound (ZnI2)(pyrimidine)(acetonitrile)0.25 (5) consisting of (ZnI2)4(pyrimidine)4 rings is obtained by quenching the reaction of ZnI2 and pyrimidine in acetonitrile using an antisolvent. On heating, 5 decomposes into a new polymorphic 1:1 compound 6, which consists of (ZnI2)(pyrimidine) chains. On further heating, 6 transforms into a third polymorphic 1:1 compound 7, which consists of (ZnI2)3(pyrimidine)3 rings, and finally into the 1:1 compound 3. Solvent-mediated conversion experiments reveal that compounds 1-4 are thermodynamically stable, whereas compounds 5-7 are metastable. Time-dependent crystallization experiments unambiguously show that compound 7 is formed by kinetic control and transforms within minutes into compound 6, which finally transforms into 3. Compound 3 represents the thermodynamically most stable 1:1 modification, whereas compounds 6 and 7 are metastable. The different compounds obtained by thermal decomposition and by crystallization from solution represent a snapshot of the species in solution and thus provide insight into the formation of coordination compounds.     

A 2D Lanthanide-organic Framework Based on Inorganic Lanthanum（Ⅲ） Sulfate Skeletons：Synthesis,Structure,and Luminescence and Thermal Properties

A new lanthanum coordination polymer formulated as {[La2(pyda) 2(μ4-SO4) ·5H2O]· 2H2O}n(1,H2pyda = 2,6-pyridine-dicarboxylic acid) has been synthesized from the reaction of H2pyda with lanthanide nitrate in the presence of sulfate as a counter anion. The compound was characterized by elemental analysis,IR spectroscopy and X-ray single-crystal diffraction. It crystallizes in the orthorhombic system,space group Pna21,with a = 18.8558(19) ,b = 6.5831(7) and c = 18.7543(19) . The compound is a 2D hybrid,in which the La(Ⅲ) ions were doubly connected by the carboxylic group of pyda2-ligand to form the La(Ⅲ) dimer followed by being grafted into 1D zig-zag chains which are further connected into a 2D network containing {[La(SO4) ]+}n helical chains. The interchain hydrogen bonding and π-π stacking interactions extended the 2D networks into a 3D supramolecular edifice.     

Determination of germanium by graphite-furnace atomic-absorption spectrometry

The premature loss of germanium as volatile GeO results in low sensitivity and poor reproducibility in the determination of germanium by graphite-furnace atomic-absorption spectrometry. This interference can be eliminated by suppressing the premature reduction of GeO(2) to GeO during the ashing step, and dissociating the germanium oxides into the atoms simultaneously with their vaporization during the atomization step. The premature reduction of GeO(2) to GeO has been successfully prevented by several approaches: (1) diminishing the reducing activity of the graphite furnace by (a) oxidizing the graphite surface and intercalating oxygen into the graphite lattice with oxidizing acids, such as nitric or perchloric, in the sample solution, or (b) using a tantalum-treated graphite furnace; (2) keeping the analyte as germanium (IV) by addition of sodium or potassium hydroxide to the sample solutions.     

Self-assembling molecular trees containing octa-p-phenylene: from nanocrystals to nanocapsules

Tree-shaped molecules consisting of octa-p-phenylene as a stem segment and oligoether dendrons as a flexible head were synthesized and characterized. The molecular tree based on a small flexible head self-assembles into a lamellar structure, whereas the molecule based on a larger headgroup self-assembles into a discrete heptameric bundle that organizes into a 3-D primitive orthorhombic supercrystals, as confirmed by X-ray scatterings and transmission electron microscopic (TEM) observations. Optical studies revealed that the absorption and emission maxima and absorption edge of the 3-D structure shift to higher energy compared to those of the lamellar structure. The molecules in dilute solution (THF/water = 1:10 v/v) were observed to self-assemble into capsule-like hollow aggregates, as confirmed by dynamic and static light scatterings, scanning electron microscopy (SEM), and TEM investigations. These results demonstrate that tree-shaped molecules are capable of packing into organized discrete nanocrystals with parallel arrangement as well as hollow nanocapsules with radial arrangement, depending on the presence of selective solvents for flexible headgroup.     

X-ray-induced production of gold nanoparticles on a SiO(2)/Si system and in a poly(methyl methacrylate) matrix

Prolonged exposure to X-rays of HAuCl(4) deposited from an aqueous solution onto a SiO(2)/Si substrate or into a poly(methyl methacrylate) (PMMA) matrix induces reduction of the Au(3+) ions to Au(0) and subsequent nucleation to gold nanoclusters as recorded by X-ray photoelectron spectroscopy. The corresponding major oxidation product is determined as chlorine {HAuCl(4)(ads) + X-rays --> Au(ads) + (3/2)Cl(2)(ads) + HCl(ads)}, which is initially adsorbed onto the surface but eventually diffuses out of the system into the vacuum. The reduced gold atoms aggregate (three-dimensionally) into gold nanoclusters as evidenced by the variation in the binding energy during X-ray exposure, which starts as 1.3 eV but approaches a value that is 0.5 eV higher than that of the bulk gold. The disappearance of the oxidation product (Cl2p signal) and the growth of the nanoclusters (related to the measured binding energy difference between the Si2p of the oxide and Au4f of the reduced gold) exhibit first-order kinetics which is approximately 3 times slower than the reduction of Au(3+), indicating that both of the former processes are diffusion controlled. Similarly, gold ions incorporated into PMMA can also be reduced and aggregated to gold nanoclusters using 254 nm deep UV irradiation in air evidenced by UV-vis-NIR absorption spectrocopy.     

Transportation of silver nanopaticles in nanochannels of carbon nanotubes with supercritical water

Supercritical water (SCW) as a highly destructive environment has been utilized to open multiwall carbon nanotubes (MWNTs) and to break silver aggregates into nanoparticles (diameter 2-20 nm). Water was drawn into open-ended MWNTs by capillary suction, pulling Ag nanoparticles into the MWNTs. The Ag nanoparticles (solid), presumably transported in the nanochannels of MWNTs by the fluidity of SCW, stacked, and fused to form nanorods, suggesting SCW associated with MWNTs (hollow interior) might be exploited as a nanoreactor.     

Investigations on the effect of Mn ions on the local structure and photocatalytic activity of Cu(I)-ZSM-5 catalysts

The introduction of Mn ions into Cu(I)-ZSM-5 was found to lead to an enhancement of the photocatalytic activity for the direct decomposition of N2O into N2 and O2 at 298 K. Various in-situ techniques such as ESR, photoluminescence, XAFS as well as a combination of CO-FT-IR and CO-TPD measurements revealed that the accommodation of Mn ions within ZSM-5 zeolite cavities significantly affects the location sites of the ion-exchanged Cu(II) ions as well as the local structure of the Cu(I) ion species formed by evacuation at high temperatures. Moreover, the introduction of Mn ions into ZSM-5 led to an increase in the amount of 3-coordinated Cu(I) species at the main channel of the zeolite, playing a major role as the active species for the photocatalytic decomposition of N2O into N2 and O2.     

Chemically triggered C-ON bond homolysis of alkoxyamines. Quaternization of the alkyl fragment

The C-ON bond homolysis in alkoxyamine 2a can be chemically triggered by the protonation of the 4-pyridylalkyl fragment. The resulting 15-fold increase in k(d) (Chem. Commun. 2011, 47, 4291-4293) was investigated experimentally and theoretically by quaternization of the pyridyl moiety using methylating (MeOTs), acylating (AcCl), and benzylating (PhCH(2)Br) agents as well as by oxidation of the pyridyl moiety into N-oxide and by the formation of a dative bond with BH(3) as a Lewis acid.     

Solution decomposition of the layered double hydroxide of Co with Fe: phase segregation of normal and inverse spinels

The nitrate-intercalated layered double hydroxide of Co with Fe decomposes on hydrothermal treatment to yield an oxide residue at a temperature as low as 180 degrees C. The oxide product is phase segregated into a Co(3)O(4)-type normal spinel and a CoFe(2)O(4)-type inverse spinel. Phase segregation is facilitated as decomposition in a solution medium takes place by dissolution of the precursor hydroxide followed by reprecipitation of the oxide phases. In contrast, thermal decomposition takes place at 400 degrees C. This temperature is inadequate to induce diffusion in the solid state whereby phase segregation into the thermodynamically stable individual spinels is suppressed. The result is a single-phase metastable mixed spinel oxide. This is rather uncommon in that a hydrothermal treatment yields thermodynamically stable products where as thermal decomposition yields a metastable product.     

Biocompatible and fluorescent polycaprolactone/silk electrospun nanofiber yarns loaded with carbon quantum dots for biotextiles

Carbon quantum dots (CDs) are attractive nanoparticles for several applications, due to inherent properties such as excitation dependent photoluminescence emission and chemical stability. In the present work, we synthesized CDs from silk (Bombyx Mori) by a microwave‐assisted method. The resultant spherical nanoparticles with high fluorescence under UV light were incorporated into PCL/silk matrix and electrospun into continuous nanofiber yarns (NF‐Ys) by a one‐step method. Besides granting yarns fluorescence, CD inclusion contributed to a decrease in fiber diameter and an increase in strength by 2.7‐fold. Cell viability studies with mammalian lung cell lines show viability above 80%, suggesting good biocompatibilty. Such yarns show the potential to be assembled into larger structures such as biotextiles, with possible multifunctionalities such as antiviral, antibacterial, and biosensing applications.     

Morphology transformation of micrometre-sized giant vesicles based on physical conditions for photopolymerisation-induced self-assembly

The physical conditions to vary the morphology of vesicles formed by amphiphilic poly(methacrylic acid)-block-poly(methyl methacrylate-random-methacrylic acid) were determined for the self-assembly induced by the nitroxide-mediated photocontrolled/living radical polymerisation performed in an aqueous methanol solution. The copolymer produced micrometre-sized spherical vesicles in the solution with a 30 wt% water content. The vesicles were transformed into a film-like morphology by decreasing the water content, whereas they were changed into nanometre-sized spherical vesicles by increasing it. The concentration of the growing polymer chain also varied the morphology. Large spherical vesicles formed at a low concentration were transformed into much smaller vesicles, followed by rod-like vesicles as a result of increasing the concentration. Furthermore, the stirring speed during the polymerisation-induced self-assembly dominated the morphology. Large elliptical vesicles produced at a low stirring speed changed into spherical vesicles, but decreased the size as the speed increased.     

Preparation of Exfoliated Low-density Polyethylene/Montmorillonite Nanocomposites Through Melt Extrusion

Introduction Polymer layeredsilicatenanocompositesexhibit somesuperiorcharacteristics,suchasthermal,me chanicalandbarrierproperties,incomparisonwiththe polymermatrixes[1—3].Intercalationpolymerization[4],polymersolutionintercalation[5]andpolymermeltinter…     

Lipase-catalyzed transformation of poly(lactic acid) into cyclic oligomers

Enzymatic transformations into cyclic oligomers were carried out with the objective of developing chemical recycling of poly(lactic acid)s, such as poly(D,L-lactic acid) (PDLLA), poly(D-lactic acid) (PDLA) and poly(L-lactic acid) (PLLA), which are typical biodegradable polymers. They were degraded by lipase in an organic solvent to produce the corresponding cyclic oligomer with a molecular weight of several hundreds. PDLLA (with a Mw of 84,000) was quantitatively transformed into cyclic oligomers by lipase RM (Lipozyme RM IM) in chloroform/hexane at 60 degrees C. PLLA (with a Mw of 120,000) was transformed into cyclic oligomer by lipase CA (Novozym 435) at a higher temperature of 100 degrees C in o-xylene. The oligomer structure was identified by 1H and 13C NMR spectroscopy and MALDI-TOF (matrix assisted laser desorption/ionization-time-of-flight) mass spectrometry.     

Rapid determination of indium,nickel and copper in NBS standard reference material by substoichiometric radioactivation analysis

A method of rapid determination for indium, nickel and copper in Spinach (NBS; SRM-1570) by substoichiometric radioactivation analysis is described. The method is based on the principle that an equal amount of non-irradiated test sample is added to the irradiated standard sample and subsequent substoichiometric extraction for the irradiated test and standard samples is carried out. Indium is extracted as diethyldithiocarbamate into carbon tetrachloride, nickel as dimethylglyoximate into chloroform and copper as dithizonate into carbon tetrachloride. The radioactivities of these extracts are measured by NaI(Tl) or Ge(Li) detector coupled with pulse-height analyser. The analytical results obtained by the method were in good agreement with our published values and certified values by NBS.     

甲基丙烯酸-3-三甲氧基硅丙酯/苯乙烯共聚乳胶粒微结构

我们曾制备了核-壳结构的杂化乳胶粒, 并用溶剂将核去除得到杂化空心微胶囊. 但由于此乳液聚合过程十分复杂, 在不同条件下反应得到乳胶粒的微结构有较大不同, 目前尚未见到各反应条件下所得产物微结构的表征和形成机理的研究报道. 本文将系统分析在不同反应条下, MPS和St种子乳液聚合过程中, 得到的乳胶粒壳层杂化聚合物的微结构, 并研究了其形成原因.