Synthesis of porous hollow silica spheres using polystyrene-methyl acrylic acid latex template at different temperatures

Porous hollow silica spheres were prepared by using polystyrene-methyl acrylic acid latex as a template and cetyltrimethylammonium bromide as a wall structure-directing agent starting from tetraethoxysilane. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), FT-infrared spectroscopy (FT-IR) and nitrogen adsorption/desorption were used to characterize the hollow silica spheres. When silica-coated latex composites were prepared at room temperature, hollow silica spheres with micropores in the walls were formed after removing the latex templates by calcination. When silica-coated latex composites were aged at a higher temperature of 150 °C, intact mesoporous hollow silica spheres were formed after calcination treatment.     

Synthesis and characterization of MCM-41 decorated with CuO particles

CuO particles have decorated on the external surface of MCM-41 by in situ introducing cupric nitrate during the hydrothermal synthesis followed by the calcination. The textural and structural properties of CuO/MCM-41 are compared with those of pure MCM-41. The results show that CuO particles are about 40 nm in size and are not agglomerated. The addition of cupric nitrate to the synthesis gel leads to materials with somewhat reduced quality as evidenced from X-ray diffraction patterns and nitrogen adsorption measurements. CuO/MCM-41 is less ordered relative to pure MCM-41 and there are inter-aggregate pores resulting in a higher average pore diameter in the material. The formation of CuO particles on the external surface of MCM-41 and the possible reason for the less ordered structure of CuO/MCM-41 are also discussed in the present paper.     

Synthesis of quasi-1D cuprous oxide nanostructure and its structural characterizations

A wealth of superfine polycrystalline cuprous oxide (Cu₂O) nanowires have been synthesized with hydrazine hydrated (N₂H₄·H₂O), act as the reducing agent, and Cu(OH)₂ nanowires, act as a soft template and surfactant, at room temperature. Two methods were employed for the synthesis of these nanowires, i.e. with and without capping agent (polyethylene glycol Mw 8000). Techniques of powder X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED) pattern, electron diffraction X-ray (EDX) spectroscopy, and UV-visible (UV-vis) spectroscopy have been used to characterize the morphology, structure, crystallinity, purity, and composition of nanowires. The average diameters of Cu₂O nanowires, prepared with and without capping agent, were observed to be 8-10 and 12-15 nm and lengths of several microns, respectively. It is found that capping agent (PEG) confines the dimensions of synthesized nanowires. In addition, the observed optical band gap of products show blue-shift effect compared to the bulk Cu₂O (E_g=2.17 eV), which ascribe it as a promising material for the conversion between solar energy and electrical or chemical energy.     

Synthesis and sintering of a monazite-brabantite solid solution ceramic for nuclear waste storage

Various geological arguments suggest that monazite can be an interesting waste-form for actinides such as Np, Pu, Cm and Am. We set up a simple procedure for making dense pellets of monazite-brabantite solid-solution ceramics with composition Ca_0.092Th_0.092Ce_0.089La_0.727PO₄. It consists of co-milling CaCO₃, ThO₂, CeO₂, La₂O₃, and NH₄H₂PO₄, 1250 °C calcination, milling, cold-pressing, and sintering at 1450 °C for 4 h. X-ray investigations showed that the reaction scheme from oxides to monazite is complex and involves various P+La-based intermediate compounds. The final density of the the product is around 95% of the theoretical density. The texture is homogeneous with a typical grain of size 5-20 μm. This process is designed to be adapted to hot cells and telemanipulators.     

Nano-sized silica hollow spheres: Preparation, mechanism analysis and its water retention property

In this article, synthesis of nano-sized silica hollow spheres applying positive charged polystyrene as sacrificial templates was introduced. Firstly, nano-sized polystyrene particles were synthesized by emulsifier-free emulsion polymerization under solvothermal condition. Secondly, silica hollow nanospheres were formed through a simultaneous ‘coating-etching’ process. PVP played a key role in the evolution of nano-sized hollow spheres even if the templates were positive charged and the formation mechanism was different from that of previous studies. TEM results revealed that the morphologies of nano-sized silica hollow spheres not only strongly relied on the amount of reactant, but also the sequence of adding them. TGA illustrated that the interiors of nano-sized silica hollow spheres were not completely ‘hollow’. Brunauer-Emmett-Teller (BET) analysis showed that this material had a specific area of 399 m²/g. The water retention property of the materials was also investigated.     

Shape-controlled synthesis of Cu2O nano/microcrystals and their antibacterial activity

Uniform cuprous oxides with different morphologies have been successfully synthesized using polyvinylpyrrolidone (PVP) as a capping agent. X-ray diffraction (XRD), scanning electron microscopy (SEM), UV–vis spectrophotometer, Fourier transform infrared spectrometer (FTIR) and X-ray photoelectron spectroscopy were employed to characterize the structure and morphology of cuprous oxides. It was found that the reaction conditions such as PVP, reducing agent and complexing agent played important roles in the formation of regular cuprous oxide crystals. In addition, their antibacterial activity against Bacillus subtilis (B. subtilis), Staphylococcus aureus (S. aureus), Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa) was also investigated by the Oxford cup method. Results suggested that cuprous oxides are selective in their antibacterial action. They display effective antibacterial activity against S. aureus, B. subtilis and P. aeruginosa. There is no bactericidal ability against E. coli in the tested concentration range, which indicates that E. coli may be a Cu(I)-tolerant bacterium.     

Synthetic antibacterial agent assisted synthesis of gold nanoparticles: Characterization and application studies

In this study, we report synthesis of water-soluble gold nanoparticles (Au-NPs), having an average diameter of ca. ∼20 nm, using ciprofloxacin (CF) as a reducing/stabilizing agent. The synthesized Au-NPs have been characterized by scanning electron microscopy (SEM), EDX, TEM, UV-visible spectroscopy (UV-vis), X-ray diffraction and cyclic voltammetry. TEM and SEM combined with EDX analysis confirmed that spherical-shaped Au-NPs were formed. UV-vis spectra of the Au-NPs showed two absorption bands corresponding to the capping agent ciprofloxacin and surface plasmon absorption bands at 274 and 527 nm, respectively. The synthesized Au-NPs are used to modify a glassy carbon electrode (GCE) and its electrochemical and electrocatalytic properties are investigated. The Au-NPs modified electrode showed excellent electrocatalytic activity towards the oxidation of methanol at +0.33 V in alkaline solution, which was not observed on the unmodified GCE. Further, electrocatalytic reduction of oxygen was also studied using the Au-NPs modified electrode at lower potential. Here, CF was used as a reducing agent for the preparation of Au-NPs dispersion. This Au-NPs dispersion is highly stable, and can be stored for more than three months in air at room temperature.     

Synthesis and characterization of water-soluble gold colloids stabilized with aminoresorcinarene

An aminoresorcinarene (TOMR) with eight amino groups as a novel ligand was synthesized and the fabrication of gold hydrosol stabilized with TOMR was reported in this paper. The TOMR-capped gold nanoparticles were characterized and analyzed by the ultraviolet visible (UV-vis) spectroscopy, Fourier transmission infrared spectra (FT-IR), X-ray diffraction (XRD) and transmission electron microscopy (TEM), respectively. The experiment showed that nearly 10 times of the usual amount of hydrate hydrazine as a reducing agent needed to be used, and the obtained TOMR-stabilized gold hydrosol had a higher level of stability at room temperature, which might be related to the structure of TOMR molecule and the formation of hydrophilic double layer structure of TOMR on the surface of gold core.     

Synthesis, microstructure, and photocatalysis of ZnO/CdS nano-heterostructure

ZnO/CdS nano-heterostructure with flower-like morphology is fabricated by a facile two-step precipitation method for use in photocatalytic degradation of organic dyes. The as-prepared samples were characterized by X-ray diffraction, scanning electron microscopy, and UV-vis spectroscopy, demonstrating that the microstructure of the ZnO/CdS nano-heterostructure is composed of flower-like ZnO modified by CdS nanoparticles. The photocatalytic performance of ZnO/CdS nano-heterostructure is evaluated by the photodegradation of rhodamine B under the simulated sunlight, and the result indicates that the ZnO/CdS nano-heterostructure exhibits an appreciable photocatalytic property, which can be attributed to the extended photo-response range and the increased charge separation rate in the heterostructure.     

Effects of the physical properties of atomic layer deposition grown seeding layers on the preparation of ZnO nanowires

Zinc oxide (ZnO) nanowires are growing in interest as the number of devices for which they are well suited increases. Success in these applications requires defined and controlled geometric incorporation of the wires into the various platforms. Therefore, establishing the ability to tailor the growth ZnO nanowires to produce specified sizes, surface densities, and orientation will be important. In the reported work, the effects of the seeding layer on these factors were accessed. Atomic layer deposition (ALD) was used to produce thin films of ZnO under varying growth and post-processing conditions. These films were fully characterized, including their thickness, surface roughness, and crystalline orientation. Using these well-defined films as the seeding layer, ZnO nanowires were grown and subsequently characterized in terms of morphology and crystalline properties. It was shown that the resulting nanowire properties are dependent upon the nature of the seeding layer, and careful production of the seeding layer allows for some control over these properties.     

Synthesis and characterization of the SnO2-pillared layered titanate nanohybrid

SnO₂-pillared titanate nanohybrid has been prepared by reacting the exfoliated layered titanate sheets with the nanosized SnO₂ sol particles. The stable two-dimensional colloidal nanosheets could be obtained by intercalating tetrabutylammonium cation into the layered protonic titanate, H_xTi_2−x/4□_x/4O₄·H₂O (x=0.67) with a lepidocrocite-like structure, and by successive exfoliation process in an aqueous solution. Monodispersed SnO₂ nano sol particles were prepared by hydrolysis of SnCl₄·5H₂O in the presence of sodium hydroxide, and then the exfoliated titanate suspension was mixed with SnO₂ nano sol solution until the flocculated products formed. The final product was heated at various temperatures in order to complete the grafting reaction of intercalated SnO₂ nano sol on the interlayer surface of layered titanate. Inductive coupled plasma, X-ray diffraction, thermal analysis and N₂-adsorption-desorption isotherms were carried out to study the hybridizing process and the structure of SnO₂-pillared titanate nanohybrid.     

Preparation, conversion, and comparison of the photocatalytic property of Cd(OH)2, CdO, CdS and CdSe

In this paper, we report the hydrothermal preparation of Cd(OH)₂ nanowires and further conversion to CdO nanobelts, CdS nanowires and CdSe nanoparticles through thermal treatment, solvothermal and mixed-solvothermal routes, respectively. The as-obtained products were characterized by means of powder X-ray diffraction (XRD), transmission electron microscopy (TEM), and field emission scanning electron microscopy (FEMSEM). Research showed that four cadmium compounds were good photocatalysts for the degradation of organic dyes such as Safranine T and Pyronine B, under irradiation of 365 nm UV light. The order of catalytic activity of different materials was found to be Cd(OH)₂<CdO<CdS<CdSe.     

XRD, microstructural and EPR susceptibility characterization of combustion synthesized nanoscale Mg1−xNixO solid solutions

The lattice parameter a(x) of the stoichiometric Mg_1−xNi_xO (0?x?1) solid solutions prepared by urea-based combustion synthesis with fuel to oxidizer ratio (ψ=1) was determined by X-ray diffraction. It was found that the dependence of the lattice parameter a(x) on the composition deviated more from the linear Vegard's model (VM) when compared to Kuzmin-Mironova (KM) model. a(x) in the Mg_1−xNi_xO system differs nontrivially from the predictions of both VM and KM models. For x=0.4 (Mg_0.6Ni_0.4O), the maximum deviation was about 2 and 1.7 pm, respectively. The increase in the intensity of (1 1 1) peak in XRD with increase of nickel concentration confirms that the substitution induces changes at the unit cell level. Nelson-Riley function (NRF) and Williamson-Hall plots are used to calculate micro strain in the solid solution. This analysis indicates that the micro strain is maximum for the compositions 60-40 (Mg_0.6Ni_0.4O), 50-50 (Mg_0.5Ni_0.5O) and 40-60 (Mg_0.4Ni_0.6O). The crystallite size was estimated using Williamson-Hall plot. We conclude that almost similar sized crystallite is formed in all the compositions studied. Porosity determined using XRD increases with a raise in the nickel concentration. The SEM morphology provides corroborative evidence. EPR susceptibilities of solid solution Mg_1−xNi_xO are determined at room temperature. Variable temperature of EPR allowed to check the Curie-Weiss law for solid solution. The linearity of C_M(x) and Θ(x) with concentration of nickel has ruled out chemical clustering in the samples.     

The reaction kinetics of NiCl2 in silica-alumina gel matrix

Insitu isothermal reduction of NiCl₂ by dextrose in silica-alumina gel matrix has been carried out between 800 and 950 °C under nitrogen atmosphere. The predominant mechanism of reaction is found to be nucleation and growth. X-ray diffraction (XRD) analyses of reacted samples confirm the presence of metallic Ni, nickel aluminate and finely dispersed alumina in the reacted samples. The average particle size of nickel has been determined by transmission electron micrograph (14 nm) as well as XRD (17±2 nm).     

Synthesis and investigation of nonlinear optical properties of semiconductor ZnS nanoparticles

ZnS nanoparticles were prepared by a simple chemical method and using PVP (poly vinylpyrrolidone) as capping agent. The sample was characterized by UV-vis spectrophotometer, X-ray diffraction (XRD) and Z-scan technique. XRD pattern showed that the ZnS nanoparticles had zinc blende structure with an average size of about 2.18 nm. The value of band gap of these nanoparticles was measured to be 4.20 eV. The nonlinear optical properties of ZnS nanoparticles in aqueous solution were studied by Z-scan technique using CW He-Ne laser at 632.8 nm. The nonlinear absorption coefficient (β) was estimated to be as high as 3.2×10⁻³ cm/W and the nonlinear refractive index (n₂) was in order of 10⁻⁸ cm²/W. The sign of the nonlinear refractive index obtained negative that indicated this material exhibits self-defocusing optical nonlinearity.     

Hydrothermal synthesis and characterization of nanocrystalline Zn-Mn spinel

Hydrothermal method had been used to successfully synthesize the nanocrystalline spinel zinc manganese oxide (ZnMn₂O₄) directly from Zn(CH₃COO)₂·2H₂O, NaOH, Mn(NO₃)₂ and H₂O₂ at 170 °C for the reaction time of 48 h. The effects of the synthesis conditions, such as the Zn/Mn molar ratio, the reaction temperature, the reaction time, the zinc source and the concentrations of NaOH and H₂O₂, on the formation of the Zn-Mn spinel were investigated. The products were characterized by means of X-ray diffraction (XRD), inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The results indicated that the compositions of the Zn-Mn spinel with the tetragonal structure were Zn_1.14Mn_1.86O₄. Scanning electron microscope (SEM) and transmission electron microscopy (TEM) images showed that the products at 170 °C were with square-shaped nanocrystalline spinel with the particle size of about 20-50 nm. The thermal behaviors of the products were investigated by thermogravimetric analysis (TG).     

Synthesis and characterization of micrometric ceramic powders for electro-rheological fluids

Micrometric lamellar ceramic powders of the displacive ferroelectric oxide Bi₄Ti₃O₁₂ were synthesized by co-precipitation of bismuth nitrate and ammonia titanyl solutions followed by a heat treatment. It was found that a complete thermal decomposition is reached at 1000 °C. Structural and thermal evolution of these ceramic powders were studied by X-ray diffraction, thermogravimetry and differential thermal analysis. The homogeneity in size and morphology of these ferroelectric particles are appropriate to prepare electro-rheological fluids. One of these fluids was prepared by dispersing the powders in silicone oil; the complex cluster structure formed by the particles, under an applied AC electric field, was observed.     

Maintaining particle size in the transformation of anatase to rutile titania nanostructures

We study the temperature-dependent transformation of two distinctly synthesized TiO₂ nanoparticles from the anatase to the rutile phase. These studies are carried out over the temperature range extending from room temperature to an excess of 800 °C where the anatase to rutile conversion is found to occur. Results obtained for both a sol-gel-generated nanocolloid (3-20 nm) and a sol-gel-generated micelle nanostructure (∼40 nm) are evaluated. While the TiO₂ nanocolloid structures aggregate to form larger crystallites as a function of increasing temperature with sizes comparable to the sol-gel-generated micelle structures, the resulting anatase crystallites, which are of a diameter 40-50 nm, appear to transform to comparable or slightly smaller rutile structures at 800 °C. This is in contrast to the transformation to larger rutile structures, observed for larger anatase particles. The importance of kinetic effects is considered as it enhances the rate of anatase to rutile conversion. These characteristics are established using a combination of Raman spectroscopic, X-ray diffraction, and scanning electron microscopy. The relative playoffs of the Raman and X-ray diffraction techniques are considered as they are used for the analysis of particles at the nanoscale, especially when phase transformations are evaluated.     

Intercalation of sulfonated melamine formaldehyde polycondensates into a hydrocalumite LDH structure

A series of sulfonated melamine formaldehyde (SMF) polycondensates possessing different anionic charge amounts and molecular weights was synthesized and incorporated into a hydrocalumite type layered double hydroxide structure using the rehydration method. For this purpose, tricalcium aluminate was dispersed in water and hydrated in the presence of these polymers. Defined inorganic–organic hybrid materials were obtained as reaction products. All SMF polymers tested intercalated readily into the hydrocalumite structure, independent of their different molecular weights (chain lengths) and anionic charge amounts. X-ray diffraction revealed typical patterns for weakly ordered, highly polymer loaded LDH materials which was confirmed via elemental analysis and thermogravimetry. IR spectroscopy suggests that the SMF polymers are interleaved between the [Ca₂Al(OH)₆]⁺ main sheets via electrostatic interaction, and that no chemical bond between the host matrix and the guest anion is formed. The SMF polymers well ensconced within the LDH structure exhibit significantly slower thermal degradation.     

Structural, optical and electrical characterization of antimony-substituted tin oxide nanoparticles

Antimony-doped tin oxide (ATO) nanostructures were prepared using chemical precipitation technique starting from SnCl₂, SbCl₃ as precursor compounds. The antimony composition was varied from 5 to 20 wt%. The lower resistance was observed at composition of Sn:95 and Sb:05, when compared with undoped and higher doping concentration of antimony. The average crystalline size of undoped and doped tin oxide was calculated from the X-ray diffraction (XRD) pattern and found to be in the range of 30-11 nm and it was further confirmed from the transmission electron microscopy (TEM) studies. The scanning electron microscopy (SEM) analysis showed that the nanoparticles agglomerates forming spherical-shaped particles of few hundreds nanometers. The samples were further analyzed by energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and electrical resistance measurements.