Heat transfer in a visco-elastic fluid past a stretching sheet with viscous dissipation and internal heat generation

This paper deals with the study of heat transfer characteristics in the laminar boundary layer flow of a visco-elastic fluid over a linearly stretching continuous surface with variable wall temperature subjected to suction or blowing. The study considers the effects of frictional heating (viscous dissipation) and internal heat generation or absorption. An analysis has been carried out for two different cases of heating processes namely: (i) Prescribed surface temperature (PST) and (ii) Prescribed wall heat flux (PHF) to get the effect of visco-elastic parameter for various situations. Further increase of visco-elastic parameter is to decrease the skin friction on the sheet. The solutions for the temperature and the heat transfer characteristics are obtained in terms of Kummers function. Received: June 16, 2004; revised: February 8, 2005     

Heat transfer of a generalized stretching/shrinking wall problem with convective boundary conditions

In this paper, we investigate the heat transfer of a viscous fluid flow over a stretching/shrinking sheet with a convective boundary condition. Based on the exact solutions of the momentum equations, which are valid for the whole Navier–Stokes equations, the energy equation ignoring viscous dissipation is solved exactly and the effects of the mass transfer parameter, the Prandtl number, and the wall stretching/shrinking parameter on the temperature profiles and wall heat flux are presented and discussed. The solution is given as an incomplete Gamma function. It is found the convective boundary conditions results in temperature slip at the wall and this temperature slip is greatly affected by the mass transfer parameter, the Prandtl number, and the wall stretching/shrinking parameters. The temperature profiles in the fluid are also quite different from the prescribed wall temperature cases.     

The effect of variable viscosity on MHD viscoelastic fluid flow and heat transfer over a stretching sheet

An analysis has been carried out to study the momentum and heat transfer characteristics in an incompressible electrically conducting non-Newtonian boundary layer flow of a viscoelastic fluid over a stretching sheet. The partial differential equations governing the flow and heat transfer characteristics are converted into highly non-linear coupled ordinary differential equations by similarity transformations. The effect of variable fluid viscosity, Magnetic parameter, Prandtl number, variable thermal conductivity, heat source/sink parameter and thermal radiation parameter are analyzed for velocity, temperature fields, and wall temperature gradient. The resultant coupled highly non-linear ordinary differential equations are solved numerically by employing a shooting technique with fourth order Runge–Kutta integration scheme. The fluid viscosity and thermal conductivity, respectively, assumed to vary as an inverse and linear function of temperature. The analysis reveals that the wall temperature profile decreases significantly due to increase in magnetic field parameter. Further, it is noticed that the skin friction of the sheet decreases due to increase in the Magnetic parameter of the flow characteristics.     

Unsteady mixed convection heat transfer along a vertical stretching surface with variable viscosity and viscous dissipation

The effect of variable viscosity on laminar mixed convection flow and heat transfer along a semi-infinite unsteady stretching sheet taking into account the effect of viscous dissipation is studied. The flow of the fluid and subsequent heat transfer from the stretching surface is investigated with the aid of suitable transformation variables. Solutions for the velocity and temperature fields are obtained for some representative values of the unsteadiness parameter, variable viscosity parameter, mixed convection parameter and Eckert number. Typical velocity and temperature profiles, the local skin friction coefficient and the local heat transfer rate are presented at selected controlling parameters.     

Heat transfer in MHD viscoelastic boundary layer flow over a stretching sheet with non-uniform heat source/sink

This paper presents the study of momentum and heat transfer characteristics in a hydromagnetic flow of viscoelastic liquid over a stretching sheet with non-uniform heat source, where the flow is generated due to a linear stretching of the sheet and influenced by uniform magnetic field applied vertically. Here an analysis has been carried out to study the effect of magnetic field on the visco-elastic liquid flow and heat transfer over a stretching sheet with non-uniform heat source. The non-linear boundary layer equation for momentum is converted into ordinary differential equation by means of similarity transformation and is solved exactly. Heat transfer differential equation is also solved analytically. The effect of magnetic field on velocity, skin friction and temperature profiles are presented graphically and discussed.     

A new family of unsteady boundary layers over a stretching surface

In this paper, a new family of unsteady boundary layers over a stretching flat surface was proposed and studied. This new class of unsteady boundary layers involves the flows over a constant speed stretching surface from a slot, and the slot is moving at a certain speed. Depending on the slot moving parameter, the flow can be treated as a stretching sheet problem or a shrinking sheet problem. Both the momentum and thermal boundary layers were studied. Under special conditions, the solutions reduce to the unsteady Rayleigh problem and the steady Sakiadis stretching sheet problem. Solutions only exist for a certain range of the slot moving parameter, α. Two solutions are found for −53.55° < α < −45°. There are also two solution branches for the thermal boundary layers at any given Prandtl number in this range. Compared with the upper solution branch, the lower solution branch leads to simultaneous reduction in wall drag and heat transfer rate. The results also show that the motion of the slot greatly affects the wall drag and heat transfer characteristics near the wall and the temperature and velocity distributions in the fluids.     

Heat transfer in unsteady axisymmetric second grade fluid

This work looks at the heat transfer effects on the flow of a second grade fluid over a radially stretching sheet. The axisymmetric flow of a second grade fluid is induced due to linear stretching of a sheet. Mathematical analysis has been carried out for two heating processes, namely (i) with prescribed surface temperature (PST case) and (ii) prescribed surface heat flux (PHF case). The modelled non-linear partial differential equations in two dependent variables are reduced into a partial differential equation with one dependent variable. The resulting non-linear partial differential equations are solved analytically using homotopy analysis method (HAM). The series solutions are developed and the convergence is properly discussed. The series solutions and graphs of velocity and temperature are constructed. Particular attention is given to the variations of emerging parameters such as second grade parameter, Prandtl and Eckert numbers.     

Heat transfer in MHD viscoelastic boundary layer flow over a stretching sheet with thermal radiation and non-uniform heat source/sink

An analysis has been carried out to study the flow and heat transfer characteristics for MHD viscoelastic boundary layer flow over an impermeable stretching sheet with space and temperature dependent internal heat generation/absorption (non-uniform heat source/sink), viscous dissipation, thermal radiation and magnetic field due to frictional heating. The flow is generated due to linear stretching of the sheet and influenced by uniform magnetic field, which is applied vertically in the flow region. The governing partial differential equations for the flow and heat transfer are transformed into ordinary differential equations by a suitable similarity transformation. The governing equations with the appropriate conditions are solved exactly. The effects of viscoelastic parameter and magnetic parameter on skin friction and the effects of viscous dissipation, non-uniform heat source/sink and the thermal radiation on heat transfer characteristics for two general cases namely, the prescribed surface temperature (PST) case and the prescribed wall heat flux (PHF) case are presented graphically and discussed. The numerical results for the wall temperature gradient (the Nusselt number) are presented in tables and are discussed.     

Lie group analysis for the effect of temperature-dependent fluid viscosity with thermophoresis and chemical reaction on MHD free convective heat and mass transfer over a porous stretching surface in the presence of heat source/sink

This paper concerns with a steady two-dimensional flow of an electrically conducting incompressible fluid over a vertical stretching sheet. The flow is permeated by a uniform transverse magnetic field. The fluid viscosity is assumed to vary as a linear function of temperature. A scaling group of transformations is applied to the governing equations. The system remains invariant due to some relations among the parameters of the transformations. After finding three absolute invariants a third-order ordinary differential equation corresponding to the momentum equation and two second-order ordinary differential equation corresponding to energy and diffusion equations are derived. The equations along with the boundary conditions are solved numerically. It is found that the decrease in the temperature-dependent fluid viscosity makes the velocity to decrease with the increasing distance of the stretching sheet. At a particular point of the sheet the fluid velocity decreases with the decreasing viscosity but the temperature increases in this case. It is found that with the increase of magnetic field intensity the fluid velocity decreases but the temperature increases at a particular point of the heated stretching surface. Impact of thermophoresis particle deposition with chemical reaction in the presence of heat source/sink plays an important role on the concentration boundary layer. The results thus obtained are presented graphically and discussed.     

MHD power-law fluid flow and heat transfer over a non-isothermal stretching sheet

This article presents a numerical solution for the magnetohydrodynamic (MHD) non-Newtonian power-law fluid flow over a semi-infinite non-isothermal stretching sheet with internal heat generation/absorption. The flow is caused by linear stretching of a sheet from an impermeable wall. Thermal conductivity is assumed to vary linearly with temperature. The governing partial differential equations of momentum and energy are converted into ordinary differential equations by using a classical similarity transformation along with appropriate boundary conditions. The intricate coupled non-linear boundary value problem has been solved by Keller box method. It is important to note that the momentum and thermal boundary layer thickness decrease with increase in the power-law index in presence/absence of variable thermal conductivity.     

Stagnation point flow of dusty Casson fluid with thermal radiation and buoyancy effects

The aim of the study is to examine the stagnation point flow of a dusty Casson fluid over a stretching sheet with thermal radiation and buoyancy effects. The governing boundary layer equations are represented by a system of partial differential equation. After applying suitable similarity transformations, the resulting boundary layer equations are solved numerically using the Runge Kutta Fehlberg fourth-fifth order method (RKF-45 method). The behaviors of velocity, temperature and concentration profiles of fluid and dusty particles with respect to change in fluid particle interaction parameter, Casson paramter, Grashof number, radiation parameter, Prandtl number, number density, thermal equilibrium time, relaxation time, specific heat of fluid and dusty particles, ratio of diffusion coefficients, Schmidt number and Eckert number are analysed graphically and discussed. Our computed results interpret that velocity distribution decays for higher estimation of Casson parameter while temperature distribution shows increasing behavior for larger radiation parameter.     

Similarity solution of boundary layer stagnation-point flow towards a heated porous stretching sheet saturated with a nanofluid with heat absorption/generation and suction/blowing: A Lie group analysis

In this paper, heat and mass transfer analysis for boundary layer stagnation-point flow over a stretching sheet in a porous medium saturated by a nanofluid with internal heat generation/absorption and suction/blowing is investigated. The governing partial differential equation and auxiliary conditions are converted to ordinary differential equations with the corresponding auxiliary conditions via Lie group analysis. The boundary layer temperature, concentration and nanoparticle volume fraction profiles are then determined numerically. The influences of various relevant parameters, namely, thermophoresis parameter Nt, Brownian motion parameter Nb, Lewis number Le, suction/injection parameter S, permeability parameter k₁, source/sink parameter λ and Prandtl parameter Pr on temperature and concentration as well as wall heat flux and wall mass flux are discussed. Comparison with published results is presented.     

Non-Newtonian flow past a stretching plate

In this paper we have considered the study of boundary layer flow past a stretching plate in visco-elastic fluid (Walters' liquid B Model).The solution of boundary layer equation of motion past a stretching plate is obtained by using similarity parameter method. The influence of visco-elastic parameterk ₀ ^* on the flow velocity is investigated.

---

Zusammenfassung Die Arbeit behandelt die Grenzschichtströmung um eine gespannte Platte in einer viskoelastischen Flüssigkeit (Walters Flüssigkeitsmodell B).Die Lösung der Grenzschicht-Bewegungsgleichung für eine gespannte Platte wird durch die Ähnlichkeits-Parametermethode erzielt. Der Einfluß des viskoelastischen Parametersk ₀ ^* auf die Strömungsgeschwindigkeit wird untersucht.

     

The influence of thermal radiation on MHD flow of Maxwellian fluids above stretching sheets

Flow induced in a viscoelastic fluid by a linearly stretched sheet is investigated assuming that the fluid is Maxwellian and the sheet is subjected to a transverse magnetic field. The objective is to investigate the effects of parameters such as elasticity number, magnetic number, radiative heat transfer, Prandtl number, and Eckert number on the temperature field above the sheet. To do this, boundary layer theory will be used to simplify energy and momentum equations assuming that fluid physical/rheological properties remain constant. A suitable similarity transformation will be used to transform boundary layer equations from PDEs into ODEs. Homotopy analysis method (HAM) will be invoked to find an analytical solution for the temperature field above the sheet knowing the velocity profiles (see Alizadeh-Pahlavan et al. [Alizadeh-Pahlavan A, Aliakbar V, Vakili-Farahani F, Sadeghy K. MHD flows of UCM fluids above porous stretching sheets using two-auxiliary parameter homotopy analysis method. Commun. Nonlinear Sci Numer Simulat, in press]). The importance of manipulating the transverse velocity component, v, will be discussed on the temperature field above the sheet.     

Biomagnetic viscoelastic fluid flow over a stretching sheet

Of concern in this paper is an investigation of biomagnetic flow of a non-Newtonian viscoelastic fluid over a stretching sheet under the influence of an applied magnetic field generated owing to the presence of a magnetic dipole. The viscoelasticity of the fluid is characterised by Walter’s B fluid model. The applied magnetic field has been considered to be sufficiently strong to saturate the ferrofluid. The magnetization of the fluid is considered to vary linearly with temperature as well as the magnetic field intensity. The theoretical treatment of the physical problem consists of reducing it to solving a system of non-linear coupled differential equations that involve six parameters, which are solved by developing a finite difference technique. The velocity profile, the skin-friction, the wall pressure and the rate of heat transfer at the sheet are computed for a specific situation. The study shows that the fluid velocity increases as the rate of heat transfer decreases, while the local skin-friction and the wall pressure increase as the magnetic field strength is increased. It is also revealed that fluid viscoelasticity has an enhancing effect on the local skin-friction. The study will have an important bearing on magnetic drug targeting and separation of red cells as well as on the control of blood flow during surgery.     

Nano boundary layers over stretching surfaces

In this paper, we present similarity solutions for the nano boundary layer flows with Navier boundary condition. We consider viscous flows over a two-dimensional stretching surface and an axisymmetric stretching surface. The resulting nonlinear ordinary differential equations are solved analytically by the Homotopy Analysis Method. Numerical solutions are obtained by using a boundary value problem solver, and are shown to agree well with the analytical solutions. The effects of the slip parameter K and the suction parameter s on the fluid velocity and on the tangential stress are investigated and discussed. As expected, we find that for such fluid flows at nano scales, the shear stress at the wall decreases (in an absolute sense) with an increase in the slip parameter K.     

Heat transfer in a Walter’s liquid B fluid over an impermeable stretching sheet with non-uniform heat source/sink and elastic deformation

In this present article an analysis is carried out to study the boundary layer flow behavior and heat transfer characteristics in Walter’s liquid B fluid flow. The stretching sheet is assumed to be impermeable, the effects of viscous dissipation, non-uniform heat source/sink in the presence and in the absence of elastic deformation (which was escaped from attention of researchers while formulating the viscoelastic boundary layer flow problems)on heat transfer are addressed. The basic boundary layer equations for momentum and heat transfer, which are non-linear partial differential equations, are converted into non-linear ordinary differential equations by means of similarity transformation. Analytical solutions are obtained for the resulting boundary value problems. The effects of viscous dissipation, Prandtl number, Eckert number and non-uniform heat source/sink on heat transfer (in the presence and in the absence of elastic deformation) are shown in several plots and discussed. Analytical expressions for the wall frictional drag coefficient, non-dimensional wall temperature gradient and non-dimensional wall temperature are obtained and are tabulated for various values of the governing parameters. The present study reveals that, the presence of work done by deformation in the energy equation yields an augment in the fluid’s temperature.     

Homotopy analysis method for solving the MHD flow over a non-linear stretching sheet

The problem of the boundary layer flow of an incompressible viscous fluid over a non-linear stretching sheet is considered. Homotopy analysis method (HAM) is applied in order to obtain analytical solution of the governing nonlinear differential equations. The obtained results are finally compared through the illustrative graphs with the exact solution and an approximate method. The compression shows that the HAM is very capable, easy-to-use and applicable technique for solving differential equations with strong nonlinearity. Moreover, choosing a suitable value of none–zero auxiliary parameter as well as considering enough iteration would even lead us to the exact solution so HAM can be widely used in engineering too.     

Exact solution of thermal radiation on MHD flow over a stretching porous sheet

The effect of radiation on MHD steady asymmetric flow of an electrically conducting fluid past a stretching porous sheet in the presence of radiation has been analyzed. Exact solutions for the velocity and temperature fields have been derived and the effects of radiation, magnetic, Prandtl number, wall temperature and suction (or injection) parameters have been studied with the help of graphs.     

Falkner-Skan equation for flow past a stretching surface with suction or blowing: Analytical solutions

The simultaneous effects of suction and injection on tangential movement of a nonlinear power-law stretching surface governed by laminar boundary layer flow of a viscous and incompressible fluid beneath a non-uniform free with stream pressure gradient is considered. The self-similar flow is governed by Falkner-Skan equation, with transpiration parameter γ, wall slip velocity λ and stretching sheet (or pressure gradient) parameter β. The exact solution for β = −1 and three closed form asymptotic solutions for β large, large suction γ, and λ → 1 have also been presented. Dual solutions are found for β = −1 for each value of the transpiration parameter, including the non-permeable surface, for each prescribed value of the wall slip velocity λ. The large β asymptotic solution also dual with respect to wall slip velocity λ, but do not depend on suction and blowing. The critical values of γ, β and λ are obtained and their significance on the skin friction and velocity profiles is discussed. An approximate solution by integral method for a trial velocity profile is presented and results are compared with the exact solutions.