杂多化合物催化丙烷的选择性氧化

杂多化合物由杂多阴离子和阳离子组成,杂多阴离子具有一定的空间结构,多种不同结合强度的晶格氧能够在氧化-还原反应中起传递电子和氧的作用。杂多化合物具有很强的酸性,可用作双功能催化剂。本文以磷、钼、钒杂多酸中掺杂过渡金属离子Cs^2 、Cu^2 、Fe^3 为催化剂,对丙烷氧化反应进行了研究。     

Selective oxidation of propane to acrylic acid over mixed metal oxide catalysts

The effects of metal atomic ratio, water content, oxygen content, and calcination temperature on the catalytic performances of MoVTeNbO mixed oxide catalyst system for the selective oxidation of propane to acrylic acid have been investigated and discussed. Among the catalysts studied, it was found that the MoVTeNbO catalyst calcined at a temperature of 600 ℃ showed the best performance in terms of propane conversion and selectivity for acrylic acid under an atmosphere of nitrogen. An effective MoVTeNbO oxide catalyst for propane selective oxidation to acrylic acid was obtained with a combination of a preferred metal atomic ratio （Mo1V0.31Te0.23Nb0.12）. The optimum reaction condition for the selective oxidation of propane was the molar ratio of C3H8 ：O2 ： H2O ： N2 = 4.4： 12.8 ： 15.3 ： 36.9. Under such conditions, the conversion of propane and the maximum yield of acrylic acid reached about 50% and 21%, respectively.     

BiMo基复合氧化物催化剂晶格氧性质与丙烷选择氧化性能

研究了不同组成、结构的BiMo基复合氧化物催化剂的丙烷选择氧化至丙烯醛的性能.X射线衍射(XRD)、X光电子能谱(XPS)、原位傅里叶变换激光拉曼光谱(FT-LRS)、电子顺磁共振(ESR)等多种表征结果表明,BiMo基复合氧化物催化剂上丙烷经由中间物丙烯选择氧化至丙烯醛,催化剂的晶格氧为选择性活性氧物种.丙烷直接氧化下丙烷至丙烯醛的选择性和收率与催化剂的Mo=O物种的氧化-还原性质密切关联,而Mo=O物种的性质又取决于Mo离子的配位环境,Mo=O物种的选择性转化丙烷经由丙烯至丙烯醛活性随畸变MoO6八面体、共顶点八面体、共边八面体、MoO4四面体配位环境递增.组成、结构优化调变的催化剂上丙烷选择氧化至丙烯醛选择性和收率可达45%和13.5%,催化剂中具有选择氧化活性的晶格氧物种数可达258 μmol/g.     

还原性气氛对丙烷选择氧化催化剂Mo-V-Te-Nb-O结构及活性的影响

系统地研究了还原剂(氯化铵)添加到丙烷选择氧化合成丙烯酸催化剂Mo-V-Te-Nb-O混合氧化物中对催化剂性能的影响.实验结果表明,在制备过程中还原剂的存在明显地影响了所得催化剂晶格氧的活动性,而晶格氧的活动性对Mo-V-Te-Nb-O混合氧化物的催化活性有重要的影响.进一步的研究表明,添加还原剂引起了催化剂形貌和相组成的变化,这些对于丙烯酸的形成有着重要作用.具有较多M1相含量的催化剂在低温(<653 K)时表现出了高丙烯酸选择性,而具有较多M2相含量的催化剂则在高温(>653 K)时更有利于丙烯酸的生成.     

Effect of pretreatment methods on the performance of Cu-Zr-Ce-O catalyst for CO selective oxidation

The Cu-Zr-Ce-O catalysts prepared using the coprecipitation method exhibited better catalytic performance for CO selective oxidation. The Cu-Zr-Ce-O catalysts pretreated with different methods were studied by CO-TPR and XPS techniques. The results showed that the Cu-Zr-Ce-O catalyst pretreated with oxygen exhibited the best catalytic performance and had the widest operating temperature window, with CO conversion above 99% from 160 to 200 ℃. The O2 pretreatment caused an enrichment of the oxygen storaged on the Cu active species and promoted the conversion of adsorbed oxygen into surface lattice oxygen. It also improved the amount of Cu＋/Cu^2＋ ionic pair, and then facilitated the formation of CuO active species on the catalyst for selective CO oxidation.     

在复合金属氧化物催化剂上丙烷直接氧化制丙烯酸

丙烷直接氧化制丙烯酸是近年来催化氧化的热点课题。MoVTe(Sb)NbO复合金属氧化物催化剂是该反应最重要的一类催化剂。本文对该类催化剂的制备化学包括活化方式以及决定催化性能的主要活性相结构等方面的新近认识进行了系统评述;依据丙烷催化转化的反应途径,总结了有关催化剂元素组分在反应中的作用与功能的最新进展,调变催化剂的粒子尺寸与形貌、晶相组成与结构、表面酸碱性与氧化还原性是获得优良催化性能的关键因素。     

Effect of cerium addition on catalytic performance of PtSnNa/ZSM-5 catalyst for propane dehydrogenation

The effect of cerium addition on the catalytic performance of propane dehydrogenation over PtSnNa/ZSM-5 catalyst has been investigated by reaction tests and some physicochemical characterization such as XRD,BET,TEM,XPS,NH 3-TPD,H 2 chemisorption,TPR and TPO techniques.It has been found that with suitable amount of cerium addition,the platinum dispersion increased,while the carbon deposition tended to be eliminated easily.In these cases,the presence of cerium could not only realize the better distribution of metallic particles on the support,but also strengthen the interactions between Sn species and the support.Additionally,XPS spectra confirmed that more amounts of tin could exist in oxidized form,which was advantageous to the reaction.In our experiments,PtSnNaCe(1.1 wt%)/ZSM-5 catalyst exhibited the best catalytic performance.After running the reaction for 750 h,propane conversion was maintained higher than 30% with the corresponding selectivity to propylene of about 97%.     

组合催化剂上丙烷选择氧化制丙烯酸

考察了在C3H8氧化脱氢的NiZrO催化剂和C3H6选择氧化的Mo基催化剂组成的组合催化剂上C3H8选择氧化制取丙烯酸的反应性能.结果表明,两个催化剂比例适当时,反应的丙烯酸收率可达最大.优化温度、烷氧比、空速以及N2含量等反应条件的结果发现,反应体系中O2的匮乏会严重影响反应性能.在有氧分布器的反应装置中对所选组合催化剂在优化的反应条件下进行了30h稳定性测试,结果表明,在340oC,反应性能基本稳定,C3H8转化率和丙烯酸选择性可分别维持在～20%和～74%.     

双溶剂浸渍法制备VOX/MCF催化剂及丙烷选择氧化

采用双溶剂法制备了负载型氧化钒类催化剂(VOx/MCF),N2物理吸附、X射线衍射、透射电镜、拉曼光谱、程序升温脱附、程序升温还原等系统研究了催化剂的物化性质并测试了其在丙烷选择氧化反应中的催化性能.结果表明,由双溶剂法制备的VOx/MCF催化剂具有较好的催化活性,且在氧化钒负载量基本一致的前提下,双溶剂法制备的VOx/MCF催化剂比普通浸渍法制备的VOx/MCF具有更高的催化活性,这与双溶剂法的制备过程可以使得钒物种尽可能进入载体内表面,有利于氧化钒的较好分散有关,而高度分散的氧化钒物种,正是丙烷选择氧化反应的活性中心.     

Key aspects of crystalline Mo-V-O-based catalysts active in the selective oxidation of propane

Mo-V-O-based complex metal oxide catalysts were synthesized hydrothermally for the first time, characterized structurally and tested in the selective oxidation of propane to acrylic acid, and the results obtained were compared on the basis of catalyst crystal structures in order to clarify key aspects of alkane selective oxidation over multifunctional metal oxide catalysts. The catalysts tested were black solids of rod-shaped crystals, which had a layer structure in the direction of fiber axis and various high dimensional arrangements of metal octahedra in the cross-section plane. A strong dependency on the octahedra arrangements and a facet dependency were observed, and the roles of metal elements in the course of selective oxidation of propane were clarified by comparing the catalytic performance of various Mo-V-O-based catalysts. We discuss the multi-functional character derived from high dimensional structures of the catalysts and mechanism of the selective oxidation of propane.     

不同RuO2含量对RuO2-Fe2O3催化剂氨选择性催化氧化性能的影响

采用溶胶-凝胶法（sol-gel）制备了一系列具有不同RuO₂含量的RuO₂-Fe₂O₃催化剂,并将其应用于氨选择性催化氧化（NH₃-SCO）研究中。结果表明,所有RuO₂-Fe₂O₃催化剂都表现出较好的低温活性,且RuO₂含量对催化剂的NH₃催化氧化活性影响显著。此外,利用BET、XRD、H₂-TPR和DRIFTS等表征手段研究了催化剂的物理化学性质和催化活性之间的关系。结果表明,RuO₂的加入增大了催化剂的比表面积。RuO₂与Fe₂O₃之间存在的协同效应提高了催化剂的氧化还原能力,从而提高了催化剂的氨氧化活性。同时,RuO₂含量对催化剂表面酸性影响很大,且催化剂表面主要存在Lewis酸性位点。     

Cr掺杂的丙烷选择氧化制丙烯酸高效催化剂

在丙烷选择氧化制丙烯酸催化剂MoVTeNbOx的活性相M1基础上掺杂一定量的Cr,当Cr/Nb摩尔比为0.002时,催化剂具有很高的丙烯酸选择性(78.3%)和收率(50.7%);并采用X射线衍射、X射线光电子能谱、程序升温还原、O2程序升温脱附、NH3程序升温脱附和异丙醇氧化等手段对催化剂的构效关系进行了探讨.结果表明,适量Cr的添加可调节催化剂表面Mo6+,V5+和Te4+等物种含量,提高催化剂的氧化能力,使丙烷转化率增加.同时,适量Cr的添加使得催化剂表面酸强度下降,酸性位点数量减少,从而抑制丙烯酸的深度氧化,提高了丙烯酸选择性.     

Cs-Fe-Co-Bi-Mn-Mo复合氧化物选择性催化氧化异丁烯

Mixed oxide catalyst Cs0.1 Fe2Co6BiMnMo12 Ox was prepared by the interprecipitation method, then the catalyst was calcined at different temperature. Selective oxidation of isobutene was carried out in a fixed-bed reactor. The results showed that the catalyst has high catalytic activity. Under the optimum reaction conditions ( n(-C4^= ) : n(O2) = 1:2-1:4, space velocity = 180h^-1, T = 360℃ ), the yield of methacmlein and methacrylic reached 80%, 8 %,respectively. The total yields of liquid products( methacrolein, methacrylic acid and acetic acid) reached about 90%.     

掺杂Nb、B等元素对MoVTe催化剂一步催化氧化丙烯制丙烯酸的影响

采用共沉淀法制备MoVTe复合氧化物系列催化剂,研究其一步氧化丙烯制备丙烯酸的催化性能,并采用XRD、ICP、EDS、H2-TPR、NH3-TPD对催化剂的结构、表面进行表征.结果表明,加入适量的Nb显著提高MoVTe复合氧化物对丙烯酸的选择性,可从34.1%提高至83.5%;同时丙烯酸的收率从24.7%提高到48.8%.适量Nb存在可以稳定催化剂表面Te元素,从而提高了丙烯酸的选择性;B、Fe、Ce、W元素掺杂对催化剂催化性能产生不同的影响,B掺杂提高了催化剂的催化性能,加入酸性元素硼可增加MoVTeNb复合氧化物催化剂表面丙烯活化位点(Te4+=O·Te3+─O·)的数目,使得丙烯转化率和丙烯酸收率显著提高,分别高达89.8%和64.8%.     

VPO催化剂P/V比对丙烷晶格氧选择氧化制丙烯酸和乙酸的影响

丙烷选择氧化制取丙烯酸(AA)和乙酸(HAc)是氧化深度大、反应过程复杂、包含氧化脱氢和选择性氧种进入分子等多重步骤的多相催化过程. 从催化剂设计的角度看,适用于该反应的催化剂必须在较温和的条件下对烷烃具有氧化脱氢的能力. 钒磷混合氧化物(VPO)是目前少有的这类催化剂. 在影响其催化性能的众多因素中,n(P)/n(V)比是个关键参数;丙烷-氧共进料连续流动氧化反应的适宜n(P)/n(V)比为1.05～1.15[1～4]. 丙烷在VPO催化剂上的选择氧化按晶格氧氧化机制进行,适合于循环流化床提升管(CFBR)反应工艺[5]. CFBR工艺在大幅度提高原料中烃的浓度、抑制深度氧化、降低未反应原料的循环费用等诸多方面具有明显的优势[6],特别适用于丙烷等小分子烷烃的选择氧化. 在CFBR工艺中,与烷烃起反应的氧全部来自催化剂. 因此,为了提高经济效益,要求催化剂有尽可能大的可逆储氧量. 本文用脉冲反应器考察了催化剂P/V比对丙烷氧化反应性能的影响.     

铁铈复合氧化物催化剂SCR脱硝的改性研究

利用共沉淀法制备了铁铈催化剂,考察添加钛、锆、钨和钼对其SCR脱硝的改性规律。结果表明,钨和钼的添加提高了铁铈催化剂高温脱硝性能,却使其低温活性有所降低;钛的添加对铁铈催化剂脱硝性能具有促进作用,尤其提高了其低温活性,并拓宽了其完全转化温度窗口,为最佳改性物。当钛的物质的量比逐渐由0.10增至0.40,铁铈钛催化剂低温脱硝效率先增大后减小,但其高温脱硝效率逐渐增大至100%,钛的最佳物质的量比为0.15。XRD和N₂吸附分析结果表明,钛能优化铁铈催化剂的孔隙结构,增大其比表面积和比孔容,细化其孔径,并与催化剂中铁、铈氧化物形成良好的固溶体,从而提高了铁铈催化剂的SCR脱硝性能。Fe_0.8Ce_0.05Ti_0.15O_z催化剂在150～400℃取得了高于90%的NO_x转化率。     

Simultaneous soot combustion and NOx reduction over a vanadia-based selective catalytic reduction catalyst

Simultaneous NO_x reduction and soot combustion over a commercial vanadia-based selective catalytic reduction (SCR) catalyst were investigated. Carbon black was used as model soot. The impact of the contact intensity between carbon and catalyst was studied. The experiments appeared as promising results for the utilization of vanadia-based SCR catalysts in SCR on filter system as, in the SCR operating temperature range (250–400 °C), no significant impact of the presence of carbon black on NO_x reduction was observed. However, a decrease in the specific carbon oxidation rate was highlighted. This latter increases with the contact between carbon and catalyst and is attributed to a lack of NO₂, consumed by the fast SCR reaction. At temperatures greater than 400 °C, the contact between carbon particles and the SCR catalyst partially inhibits the NO_x reduction, whereas it exhibits a catalytic effect on the carbon oxidation rate. The tighter the contact between the two materials, the more significant is this behavior. A redox mechanism, which competes with the redox cycle of the SCR mechanism, was proposed. The impregnation of a V-based SCR catalyst with 2 wt % of calcium was also performed. A drastic loss of DeNO_x activity was observed, whereas the effect of the contact between carbon and catalyst was reduced.     

Selective Oxidation of Propane over CsFePVAsMo Heteropoly Compound Catalyst

Both the partially reduced and non-reduced multi-component heteropoly compound catalysts with Keggin structure were prepared and used for the selective oxidation of propane. The catalysts were characterized by IR, H2-TPR, NH3-TPD, SEM and XRD. The addition of Cs increased the selectivity of acrylic acid and acetic acid. The selective oxidation performance was greatly improved with the addition of As. Among all of the tested catalysts, the catalytic performance of the Cs1.8Fe0.16HxPVAs0.4Mo11O40 (non-reduced) was the best and the maximum yield of acrylic acid reached 16.42%.     

丙烷在钒-磷混合氧化物催化剂上晶格氧氧化及其循环流化床工艺

丙烯酸;丙烷在钒-磷混合氧化物催化剂上晶格氧氧化及其循环流化床工艺     

Kinetic study of propane dehydrogenation and catalyst deactivation over Pt-Sn/Al2O3 catalyst

The kinetics of propane dehydrogenation and catalyst deactivation over Pt-Sn/Al₂O₃ catalyst were studied. Performance test runs were carried out in a fixed-bed integral reactor. Using a power-law rate expression for the surface reaction kinetics and independent law for deactivation kinetics, the experimental data were analyzed both by integral and a novel differential method of analysis and the results were compared. To avoid fluctuation of time-derivatives of conversion required for differential analysis, the conversion-time data were first fitted with appropriate functions. While the time-zero and rate constant of reaction were largely insensitive to the function employed, the rate constant of deactivation was much more sensitive to the function form. The advantage of the proposed differential method, however, is that the integration of the rate expression is not necessary which otherwise could be complicated or impossible. It was also found that the reaction is not limited by external and internal mass transfer limitations, implying that the employed kinetics could be considered as intrinsic ones.