Spontaneous Fission Barriers Based on a Generalized Liquid Drop Model

The barrier against the spontaneous fission has been determined within the Generalized Liquid Drop Model （GLDM） including the mass and charge asymmetry, and the proximity energy. The shell correction of the spherical parent nucleus is calculated by using the Strutinsky method, and the empirical shape-dependent shell correction is 6mp10yed during the deformation process. A quasi-molecular shape sequence has been defined to describe the whole process from one-body shape to two-body shape system, and a two-touching-ellipsoid is adopted when the superdeformed one-body system reaches the rupture point. On these bases the spontaneous fission barriers are systematically studied for nuclei from 2a~Th to 249 Cm for different possible exiting channels with the different mass and charge asymmetries. The double, and triple bumps are found in the fission potential energy in this region, which roughly agree with the experimental results. It is found that at around Sn-like fragment the outer fission barriers are lower, while the partner of the Sn-like fragment is in the range near l~SRu where the ground-state mass is lowered by allowing axially symmetric shapes. The preferable fission channels are distinctly pronounced, which should be corresponding to the fragment mass distributions.     

利用有效液滴模型对超重元素α衰变半衰期的研究

利用有效液滴模型计算了偶偶超重核的α衰变半衰期,计算过程中采用了保持碎片体积守恒的不对称形状描述以及有效惯性系数计算Gamow势垒穿透因子.首先在质子数Z为88—98的区域检验了有效液滴模型,发现计算结果与实验符合得比较好.随后将此模型推广到Z≥100的情况,虽然只用了两个模型参数,计算结果与实验数据符合,说明有效液滴模型是计算偶偶超重核素α衰变半衰期的一个成功模型.     

The Analytical Parametrization of Fusion Barrier by Using the Skyrme Energy-Density Function Model

Using the skyrme energy density formalism, a pocket formula is introduced for barrier heights and positions of 95 fusion reactions (48 ≤ Z_PZ_T ≤ 1520) with respect to the charge and mass numbers of the interacting nuclei. It is shown that the parameterized values of RB and VB are able to reproduce the corresponding experimental data with good accuracy. Moreover, the absolute errors of our formulas are less than those obtained using the analytical parametrization forms of the fusion barrier based on the proximity versions. The ability of the parameterized forms of the barrier heights and its positions to reproduce the experimental data of the fusion cross section have been analyzed using the Wong model.     

重核融合反应动力学位垒的微观研究

在简要评述重核融合过程中几种主要理论模型的基础上,提出了微观输运动力学模型,即改进的量子分子动力学模型.在这个模型的框架内,我们研究了重核融合位垒的动力学行为.我们发现,随入射能量的减少,可以得到最低的动力学位垒,它趋近于绝热静态位垒.而随入射能量的增加,动力学位垒增加,最后趋近于非绝热静态位垒,这给出了位垒分布的两个边缘.在微观输运动力学模型基础上,我们还研究了在融合路径上,动力学位垒与融合体系微观构型的关系.考虑到融合过程不同时刻的单粒子位势与双中心壳模型位势的相似性,我们可以很好的研究融合过程中,在构型空间里单粒子态及相关量的时间演化行为.     

推广的液滴模型对超重核288115及其α衰变链性质的研究

运用推广的液滴模型来确定新核素²⁸⁸115及其α衰变链上核的衰变位垒, 采用量子力学中处理α衰变的WKB方法, 对该链上各原子核的α衰变半寿命进行了研究．计算结果表明推广的液滴模型结合WKB方法可以很好地在超重区符合α衰变半寿命的实验值. 同时把推广的液滴模型的计算结果和采用密度相关的M3Y微观核力的结果做了详细的比较, 宏观模型(推广的液滴模型)和微观模型(密度相关的M3Y微观核力)计算的α衰变半寿命以及实验值三者之间的符合是对新核素²⁸⁸115及其α衰变链上核半寿命很好的检验.     

A Barrier Problem in Luttinger Liquid

By using Gaussian wave functional method, the problem of a single barrier in a one-dimensional interacting electron system is studied. We have constructed the ground state of the system and discussed the phase diagram at the weak barrier limit.     

熔合反应中动力学势垒的研究

用改进的量子分子动力学模型研究了与入射能量相关的重离子熔合势垒. 随着 入射能的降低可以观察到动力学势垒的最低值, 这个最低动力学势垒与绝热势垒 非常接近；动力学势垒随着入射能的增加而升高, 最终接近于静态势垒(非绝热势垒). 基于动力学势垒的研究, 对于重离子熔合反应的额外推动(extra-push)给出了微观理解,对势垒贯穿给出了一种新的解释. 为进一步理解动力学势垒, 还研究了颈部的形成和体系的动力学形变, 分析了动力学势垒降低的原因.     

哪些核适合被液滴模型描述:基于不确定度分解方法的统计研究（英文）

一个模型适合描述哪些物理量? 这个问题可以通过模型的物理来源来回答。比如,液滴模型适合描述重核和远离满壳核。这是因为液滴近似更适用于核子数多的核以及液滴模型不包含壳效应。这样的回答是定性的并需要清楚模型的物理来源。是否可能仅通过模型的数学形式和实验数据就能给出半定量的解答? 利用最近提出的不确定度分解方法尝试对液滴模型适合描述哪些核这一问题进行半定量的回答。并且不需已知液滴模型的物理来源,仅需其数学形式以及实验数据。通过不确定度分解方法,液滴模型与实验数据间的残差可以分解为系统不确定度和统计不确定度。两者分别代表了模型的缺陷和模型不精确的参数带来的不确定度。基于这一分解,核素图上的原子核可以按其对应的残差被半定量地划分为系统不确定度主导、统计不确定度主导、以及中间区域。液滴模型适合描述的核就是统计不确定度主导残差的核而不是像通常认为的是残差最小的核。从核素图上看,统计不确定度主导残差的核正是重核以及远离满壳核,与液滴模型物理来源一致,但得到这一结果的过程是半定量的且仅需液滴模型的数学形式以及实验数据。如果对由统计不确定度主导残差的核重新拟合液滴模型的参数,模型可以很好地描述这些核（标准差小于0.7 MeV）。Which data are well described by a theoretical model? Such questions can be answered through the physical origin of the model. For example, the liquid drop model (LDM) well describes the heavy and far from shell nuclei. Because the liquid-drop assumption is more suitable for nuclei with more nucleons and LDM does not include the shell effect. Such answer is qualitative and needs a clear view on the physical origin of the model. Is it possible to give an semi-quantitatively answer only from the mathematical form of the model and the observed data. In the present work, the recently suggested uncertainty decomposition method (UDM) is used to answer which nuclei are well described by LDM. The residues between LDM and the observed data can be decomposed through UDM to systematic and statistical uncertainties, which represent the uncertainty of the deficiency of the model and the indeterminate parameters, respectively. Based on UDM, the chart of nuclides are semi-quantitatively divided into three parts, areas dominated by the systematic and statistical uncertainties, and the cross area. Contrary to the common sense, the well described nuclei by LDM are not the nuclei with small residues, but actually the nuclei of which the residues are dominated by the statistical uncertainty. These nuclei are indeed the heavy and far from shell nuclei, which agrees with the physical consideration of LDM. But only the mathematical form of the model and the experimental data are needed during the use of UDM. The nuclides dominated by the statistical uncertainty can be well described by LDM (standard deviation less than 0.7 MeV) with parameters fitting to these nuclei.     

重离子熔合势垒的动力学模型研究

在改进的量子分子动力学模型基础上系统地研究了超重核合成中的入射道静态势和动力学势.从入射道静态势给出了质量不对称度与静态势垒高度以及质量不对称度与接触点驱动势的关系.动力学势垒高度是能量依赖的,随着入射能量的增加而增加,最终趋近于密度冻结势垒高度;动力学势垒高度随着入射能量的降低而降低,它的最低值接近于绝热势垒高度.在冷熔合反应中,动力学势垒的最低值所对应的入射能量可能是合成超重元素最佳入射能的选择     

40, 48Ca+90, 96Zr近垒熔合反应的动力学研究

发展了一种改进的量子分子动力学模型,并用这一模型研究了40,48Ca+90,96Zr的近垒熔合反应.改进的量子分子动力学模型能很好地描述一系列核,从6Li到208Pb,的基态性质及它们的时间演化.在相同参数下计算得到的40Ca+90Zr以及40Ca+96Zr这两个熔合反应的激发函数与实验结果都符合得相当好.在分析丰中子核熔合截面增强机制中,发现丰中子核熔合反应初始阶段颈部的N/Z值明显偏大,促使反应中动态位垒降低,从而引起了丰中子核反应熔合截面的增强. An improved Quantum Molecular Dynamics (QMD) model is proposed and the fusion reactions 40, 48Ca+90, 96Zr are studied by using this model. With our improved QMD model, the ground state properties and their time evolution of nuclei from 6Li to 208Pb can be reproduced reasonably well and the excitation functions of fusion cross section for reactions40Ca+96Zr and 40Ca+96Zr at near barrier can be reproduced remarkably well with the same set of parameters...     

Alpha decay half-lives of heavy nuclei within a generalized liquid drop model

Theoretical α-decay half-lives of the heaviest nuclei are calculated using the experimental Qα value. The barriers in the quasi-molecular shape path is determined within a Generalized Liquid Drop Model (GLDM) and the WKB approximation is used. The results are compared with calculations using the DensityDependent M3Y (DDM3Y) effective interaction and the Viola-Seaborg-Sobiczewski (VSS) formulae. The calculations provide consistent estimates for the half-lives of the α decay chains of these superheavy elements. The experimental data stand between the GLDM calculations and VSS ones in the most time.     

在超重核区应用Viola-Seaborg公式研究α衰变寿命

在超重核区(Z≥104)使用文献[7—9]给出的3组参数应用Viola-Seaborg公式计算了α衰变寿命,所得结果与实验值进行比较,发现其结果与实验值相差较大。为此,利用最小二乘法分别在重核区和超重核区重新对参数进行了拟合,得到的计算结果与实验值相比符合得较理想,尤其是由超重核得到的参数的结果非常理想。     

Alpha decay half-lives of heavy nuclei within a generalized liquid drop model

Theoretical α-decay half-lives of the heaviest nuclei are calculated using the experimental Q_α value. The barriers in the quasi-molecular shape path is determined within a Generalized Liquid Drop Model (GLDM) and the WKB approximation is used. The results are compared with calculations using the Density-Dependent M3Y (DDM3Y) effective interaction and the Viola-Seaborg-Sobiczewski (VSS) formulae. The calculations provide consistent estimates for the half-lives of the α decay chains of these superheavy elements. The experimental data stand between the GLDM calculations and VSS ones in the most time.     

Effects of shell correction on α decay properties

The shell correction effects on the α decay properties of heavy and superheavy nuclei have been studied in a macroscopic-microscopic manner. The macroscopic part is constructed from the generalized liquid drop model(GLDM), whereas the microscopic part, namely, the shell correction energy, brings about certain effects on the potential barriers and half-lives under a WKB approximation, which is emphasized in this work. The results show that the shell effects play a significant role in the estimation of the α decay half-lives within the actinide region.Predictions of the α decay half-lives are then generated for superheavy nuclei, which will provide useful information for future experiments.     

Studying Validity of Single-Fluid Model in Inertial Confinement Fusion

The validity of single-fluid model in inertial confinement fusion simulations is studied by comparing the results of the multi- and single-fluid models. The multi-fluid model includes the effects of collision and interpenetration between fluid species. By simulating the collision of fluid species, steady-state shock propagation into the thin DT gas and expansion of hohlraum Au wall heated by lasers, the results show that the validity of single-fluid model is strongly dependent on the ratio of the characteristic length of the simulated system to the particle mean free path. When the characteristic length L is one order larger than the mean free path A, the single-fluid model＇s results are found to be in good agreement with the multi-fluid model＇s simulations, and the modeling of single-fluid remains valid. If the value of L/A is lower than 10, the interpenetration between fluid species is significant, and the single-fluid simulations show some unphysical results; while the multi-fluid model can describe well the interpenetration and mix phenomena, and give more reasonable results.     

Systematic study of a decay half-lives within the Generalized Liquid Drop Model with various versions of proximity energies

It is universally acknowledged that the Generalized Liquid Drop Model(GLDM)has two advantages over other a decay theoretical models:introduction of the quasimol...     

表面特性对矩形小流道内液滴脱离现象的影响

本文设计了一个可视化微小平直流道,利用摄影装置观察记录了液态水通过平板内部直径70μm的微孔在水平平板表面上形成液滴并成长直至脱离的过程,分析了不同流道高度条件下接触角之差与液滴高度和通道内流动空气的雷诺数的关系,并且进一步讨论了平板表面特性对液滴脱离高度和接触角之差的影响.     

Generalized Poisson Hurdle Model for Count Data and Its Application in Ear Disease

For count data, though a zero-inflated model can work perfectly well with an excess of zeroes and the generalized Poisson model can tackle over- or under-dispersion, most models cannot simultaneously deal with both zero-inflated or zero-deflated data and over- or under-dispersion. Ear diseases are important in healthcare, and falls into this kind of count data. This paper introduces a generalized Poisson Hurdle model that work with count data of both too many/few zeroes and a sample variance not equal to the mean. To estimate parameters, we use the generalized method of moments. In addition, the asymptotic normality and efficiency of these estimators are established. Moreover, this model is applied to ear disease using data gained from the New South Wales Health Research Council in 1990. This model performs better than both the generalized Poisson model and the Hurdle model.     

Instability of Non—Fermi Liquid Behavior in the Two—Channel Kondo Model

The effects of interchannel scattering of conduction electrons by the impurity and repulsion of conduction electrons at the impurity site on the two-channel Kondo model are simultaneously considered in this paper,It is shown that these two perturbations will substantially modify the usual local non-Fermi liquid behavior of the two-channel Kondo model.With bosonization and unitary transformations we find that the system can be transformed into a single channel Kondo model with anisotropy between longitudinal and transverse exchange couplings,Whatever for originally antiferromagnetic or ferromagnetic isotropic coupling,the system always flows to strong-coupling limit,which exhibits local Fermi liquid behavior at low temperatures.