Studies of aminolysis of acrylonitrile–divinylbenzene–methyl methacrylate copolymers

Aminolysis of nitrilacrylate–divinylbenzene–methyl methacrylate copolymers by diethylenetriamine is studied under various conditions. The effect of temperature and catalyst concentration on the properties of synthesized anion exchangers depending on the duration of aminolysis is investigated. The conditions for synthesizing anion exchangers with high capacity characteristics are proposed according to the study results.     

Thermogravimetric characterization of styrene–divinylbenzene copolymers containing alpha-isopropylaminophosphonic acid groups

A commercial styrene–divinylbenzene copolymer was functionalized by multistep reactions with alpha-isopropylaminophosphonic acid groups. Three different functionalized copolymers were obtained in which the phosphonic groups are in meta (1E), para (2E), and ortho (3E) positions. The thermal behavior was studied using the TG/IR hyphenated technique and kinetic analysis of thermo-oxidation under nonisothermal conditions. The evolved gas analysis confirms the partial thermo-oxidative degradation of polymeric materials, with significant preservation of the aromatic ring. The kinetic analysis was performed by three methods: Friedman, Flynn–Wall–Ozawa, and nonparametric kinetic.     

CFD analysis of a TG–DSC apparatus

A ThermoGravimetric analyser with differential scanning calorimetry (TG–DSC) has been studied during the fusion of an indium sample using both an experimental procedure and a CFD simulation. To do so, a CAD model of the real device was built and meshed in detail, in order to take into account the small scale processes which occur inside the crucibles. Several theoretical models, some previously existing in the CFD software used and others developed ad hoc, were applied to simulate the whole facility. Therefore, realistic boundary conditions and a PID-based control system already developed for previous studies had to be used. The validation of the CFD model was done by comparing the outcome of the resulting simulation to the results obtained by experimental procedure in a case where natural convection is the main heat and mass transfer mechanism. This comparison was made for two different heating rates inside the furnace. Typical characteristics of phase change process inside a TG-DSC as thermal lag, onset temperature or heat flow exchange during the fusion could be analysed. As well, a more detailed approach to physical phenomena taking place inside the furnace could be done, since CFD simulations allow to obtain data which is not achievable experimentally. Besides, a valid CFD model for a TG-DSC could be later used in further CFD simulations.     

Thermal decomposition of RDX/AP by TG–DSC–MS–FTIR

The method of TG–DSC–MS–FTIR simultaneous analysis has been used to study the thermal decomposition mechanism of the RDX/AP (1/2) mixture. TG–DSC showed that there were two mass loss processes for thermal decomposition of RDX/AP. The first one was mainly ascribed to the thermal decomposition of RDX. Addition of AP to RDX causes decomposition to take place abruptly, after melting, resulting in a very sharp and strong peak at lower temperature. The apparent activation energies, calculated by model-free Friedman method, of this process were negative. The second mass loss process of RDX/AP was confirmed to be the thermal decomposition of AP, catalyzed by RDX. This process can be divided into three stages, which were an nth-order autocatalytic and two one-dimensional diffusion stages, respectively. There was a competition among the formation reactions of N₂O, HNCO, and HCl for the first stage and between NO₂ and N₂O for the later two stages. The production of N₂O dominated in the second stage, while NO₂ did in the third stage.     

TG–DSC analysis of pyrolysis process of two Chinese oil shales

According to the recommendations developed by the Kinetics Committee of the International Confederation for Thermal Analysis and Calorimetry (ICTAC), non-isothermal pyrolysis experiments were carried out to analyze and compare two types of oil shale from the northeast of China using simultaneous differential scanning calorimetry (DSC) and thermogravimetric (TG) analysis at temperatures ranging from 40 to 850 °C. The pyrolysis process of oil shale begins with the evaporation of small molecular substances, then continues by the pyrolysis of kerogen, and finally ends mainly with the complete decomposition of carbonates. In this whole process, almost 36 % of overall pyrolytic heat was used for the pyrolysis of kerogen. When retorting air-dried basis oil shale below 520 °C, a considerable proportion of the heat required will have to be used mainly for the evaporation of small molecular substances below 185 °C. Specific heat capacities of two oil shale semicokes were measured below 500 °C by DSC method, showing that specific heat capacity of semicoke will increase with the increase of the temperature, and carbonization of kerogen can bring about a further positive effect on it. Coats–Redfern method was used to calculate kinetic parameters in three pyrolysis stages.     

Simultaneous TG/DTG–DSC–FTIR characterization of collagen in inert and oxidative atmospheres

In this paper, a TG/DTG–DSC–FTIR study of type I collagen extracted from bovine Achilles tendon both in inert (nitrogen) and oxidative atmosphere (synthetic air and oxygen) from room temperature to 700 °C was performed. The thermal analysis results have shown that after initial dehydration, collagen exhibits a single decomposition step in nitrogen (due to pyrolysis), while in air and oxygen two steps are observed due to thermo-oxidative decomposition, the latter being highly exothermic. The CO₂ bands dominate the FTIR spectra of evolved gases in all atmospheres (especially in air and oxygen), along with the characteristic bands of ammonia, water, HNCO, methane. In nitrogen, the bands of pyrrole, HCN, and ethane were also identified, while in oxidative atmospheres, nitrogen oxides and CO are released. A study was also performed by comparing the DTG and gas evolution curves observed for the three atmospheres.     

TG–DSC–FTIR–MS study of gaseous compounds evolved during thermal decomposition of styrene-butadiene rubber

The thermal decomposition behavior of styrene-butadiene rubber was studied using a system equipped with thermogravimetric analysis, differential thermal analysis, Fourier transform infrared spectroscopy, and mass spectroscopy. Two different experiments were conducted. From these experiments, thermogravimetric analysis results indicated a mass loss of 58 % in the temperature range of ~290–480 °C and a mass loss of 39 % in the temperature range beyond 600 °C. Scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy confirmed the presence of oxides, even at 1,000 °C, accounting for the Zn, Mg, Al, Si, and Ca in the original sample.     

Study of thermal behavior of α-PbO2, using TG and DSC

Using two techniques of thermogravimetry and differential scanning calorimetry under O₂ gas atmosphere from 25 to 600°C, the thermal behavior of laboratory-produced compound lead(IV) oxide α-PbO₂ was investigated. The identity of products at different stages were confirmed by XRD technique. Both techniques produced similar results supporting the same decomposition stages for the compound. Three distinct energy changes were observed, namely, two endothermic and one exothermic in DSC. The amount of ΔH for each peak is also reported.     

Thermal investigation of heavy crude oil by simultaneous TG–DSC–FTIR and EDXRF

Present study investigates thermal behavior of two heavy crude oils with different °API values by simultaneous thermogravimetry–differential scanning calorimetry–fourier transform infrared spectroscopy (TG–DSC–FTIR), and an evaluation of the chemical element levels present in the oils’ ashes was done by energy dispersive X-ray fluorescence spectrometry. TG and DSC curves were obtained for two samples in nitrogen atmosphere. Among all inorganic components evaluated, the highest concentration in the two oils was SO₃. Thus this study may contribute to a better understanding of the thermal behavior of heavy crude oils and their composition.     

TG–DSC analysis applied to contemporary oil paints

Thermogravimetry coupled with differential scanning calorimetry (TG–DSC) has been commonly used in the field of conservation of Cultural Heritage for the study of art objects, especially for the characterisation of inorganic matrixes. In recent years, thermal analyses have been applied to the study of organic painting materials. The advantages of performing TG–DSC are linked to the fact that it is micro-destructive technique which does not require any treatment prior the analysis and provide useful information in relatively short time. The aim of this study is to describe the application of TG–DSC on the study of oil binders used in contemporary paints. Even if synthetic binders have become increasingly popular in the 20th century, many contemporary artists still prefer the more traditional media: drying oils. Although the wish of recalling traditional methods, much practical knowledge in paint preparation by mixing drying oil and pigments and in the behaviour of the mixture has been lost. This is mainly due to the different composition of contemporary materials in comparison with the traditional ones and may sometimes lead to different drying properties of the oil paint formulations and consequent problems in the art creation and conservation. For answer to this artistic need and in particular to the difficulties outlined by artists themselves in producing and employing oil paints, unpigmented and pigmented oil films were studied after a week, 1 and 2 years of natural drying under laboratory conditions. Thermal analyses were performed in air flow: the focus of this research was, in fact, to study the thermal and oxidative behaviours of young films for better understanding the very first processes leading to the formation of the film.     

Application of DSC–TG and NMR to study the soil organic matter

The environmental concern on soil exploitation, linked to global warming by the Kyoto protocol, is responsible for increasing interest in the understanding of the role of the composition and structure of the soil organic matter (SOM) on soil carbon, C, dynamics. Thermal analysis and nuclear magnetic resonance (NMR) are applied to study the thermal properties, the structure and composition of the SOM of six samples with different C contents in order to improve the interpretation of results given by thermal analysis. Results showed that the direct integral of the combustion peaks obtained by DSC and the percentage of SOM given by TG were both directly related to the quantity of total soil C. Thus, soils with higher C content showed higher energy content too. The combustion temperatures of the curves given by DSC are those reported for labile OM. NMR results indicated the presence of aliphatic C, carbohydrates, and a weak signal in the aromatic C band in all the samples that was not detected in the DSC curves. Only two samples showed carboxyl/carbonyl C which was not detected by DSC also.     

The use of TG/DSC–FT-IR to assess the effect of Cr sorption on struvite stability and composition

Struvite (MgNH₄PO₄·6H₂O; MAP) can be recovered from animal and human wastes for use as fertilizer. This encourages the sustainable use of phosphorus (P), closing the human P cycle. The toxic metalloid chromium (Cr) is a common component of wastes, and can substitute for P in geochemical and biological systems. Thus, its sorption to, and effect on the stability and composition of recovered MAP requires assessment. MAP precipitated from solutions with 1?C100???M Cr(III) had higher Cr loadings compared to those reacted in the presence of Cr(VI), indicative of higher sorption affinity of the lower oxidation state. Simultaneous thermal analysis of unreacted MAP revealed an endothermic peak at 126?±?0.5?°C by DSC with a mass loss of 52.9% by TG. Sorption of Cr produced minimal effects on the transition temperature and overall mass loss. The inflection in the TG curve indicated that Cr increased the temperature of maximum decomposition, but also the mass loss at this point. Combining TG results with FT-IR spectra revealed that for initial concentrations of 10?C50???M Cr(III) and 1?C5???M Cr(VI), NH₄ ⁺ was added, and H₂O(s) lost from the MAP structure. The change in composition was consistent with substitution of Cr(III) or Cr(VI) into the MAP structure. The TG/DSC?CFT-IR technique confirmed that Cr contamination affects the MAP composition and may accelerate the release of nutrients upon mineral decomposition. This has implications for the use of MAP fertilizers and subsequent cycling of P and contaminants in agricultural systems.     

TG–DTA, UV and FTIR spectroscopic studies of urea–thiourea mixed crystal

A mixed crystal of urea–thiourea was grown by slow evaporation of aqueous solution at room temperature. The bright and transparent crystals obtained were characterized by thermogravimetric–differential thermal analysis (TG–DTA), UV and FTIR spectroscopic analyses. A fitting decomposition pattern for the title compound was formulated on the TG curve which shows a two stage weight loss between 200 and 750 °C. In this temperature range DTA curve shows exothermic peaks supporting the formulated decomposition pattern. The UV and FTIR spectra show the characteristic absorption, vibration frequencies due to urea–thiourea mixed crystals. Detailed structural analysis of the compound is under progress.     

Thermal analysis (TG–DSC,DSC–microscopy and EGA) and characterization of heavy trivalent lanthanides and yttrium isonicotinates

Journal of Thermal Analysis and Calorimetry - The trivalent lanthanide isonicotinates were synthesized to obtain stoichiometry Lu(IN)3 and Ln(IN)3·2H2O (Ln?=?Tb to Lu, and Y;...     

Decomposition process and kinetics of waste rare earth polishing powder TG–DTA–FTIR studies

The decomposition reaction process of waste rare earth (RE) polishing powder was monitored in real time by the thermogravimetry?Cdifferential thermal analysis (TG?CDTA) and Fourier transform infrared spectroscopy (FTIR). The results showed that the reaction was divided into two stages, and the thermal weight losses got to stable when the temperature was more than 400?°C. The releasing gas mainly contained H₂O and SiF₄, and the reaction kinetics during decomposition process was studied by the methods of Freeman-Carroll and Kissinger.     

DSC studies on the curing kinetics of chitosan–alanine using glutaraldehyde as crosslinker

The curing of chitosan–alanine with glutaraldehyde as curing agent in the presence of Chlorpheniramine Maleate (CPM) is carried out with the help of differential scanning calorimeter (DSC). The effect of concentration of chitosan and percentage of crosslinker on the curing is studied at a rate of 5 °C/min. Cure kinetics are measured from 30 to 200 °C at four different heating rates (3, 5, 7 and 10 °C/min). It is observed that the crosslinking of chitosan–alanine is an exothermic process which results in a positive peak in the curves. An increase in activation energy (E _α) is observed with extent of conversion.     

Thermochemical characteristics of chitosan–polylactide copolymers

The energies of combustion of chitosan and its block-copolymers with different polylactide contents are determined in a static bomb calorimeter. Standard enthalpies of combustion and formation are calculated for these substances. The dependences of the thermochemical characteristics on block-copolymer composition are determined and discussed.     

Preparation and sorption studies of polyester microsphere copolymers containing β-Cyclodextrin

Polyester copolymer sorbent materials that incorporate β-Cyclodextrin (β-CD) were prepared using water-in-oil (w/o) micro-emulsion conditions at variable β-CD: cross linker mole ratios; where the cross linker units were sebacoyl chloride (SCl) and terephthaloyl chloride (TCl). The copolymers were characterized using TGA, nitrogen adsorption, and NMR/IR spectroscopy. The dye-based sorption properties of the copolymers with p-nitrophenol (PNP) in aqueous solution were evaluated at pH 4.6 and 295 K using UV-Vis spectrophotometry. The uptake of PNP varied from 0.221 to 0.352 mmol/g, according to the nature of the cross linker and the copolymer mole ratio. The sorption capacity of SCl-based copolymers exceed that for TCl-based copolymers, and correlate with the relative swelling properties and hydrated surface areas of the sorbent frameworks. ¹H NMR spectroscopy of copolymers with low levels of linker content (i.e. SCl or TCl) indicate dual sorption sites for PNP (i.e. β-CD inclusion sites and non-inclusion (interstitial) linker domains). The existence of dual sorption sites is similarly concluded for copolymers containing higher levels of cross linker. Inclusion complexes are firstly formed between PNP and the β-CD inclusion sites of the copolymer; thereafter, PNP is adsorbed onto the linker domains of the copolymer sorbent framework.