Measurement of the enthalpies of vaporization and sublimation of solids aromatic hydrocarbons by differential scanning calorimetry

An experimental procedure is proposed for direct measurement of the heat involved in the vaporization of a solid organic compound above its normal melting temperature. This technique consists on the fusion of a solid aromatic hydrocarbon, which is then vaporized by a sudden decrease of the pressure. The direct register of heat flow as function of time by differential scanning calorimetry allows the quantifying of the enthalpy of vaporization of compounds such as phenanthrene, β-naphthol, pyrene, and anthracene. Enthalpies of vaporization were measured in an isothermal mode over a range of temperatures from 10 to 20 K above the melting temperatures of each compound, while enthalpies of fusion were determined from separate experiments performed in a scanning mode. Enthalpies of sublimation are computed from results of fusion and vaporization, and then compared with results from the literature, which currently are obtained by calorimetric or indirect techniques.     

Thermochemistry of uracil and thymine revisited

Thermochemical properties of uracil and thymine have been evaluated using additional experiments. Standard (p⁰ = 0.1 MPa) molar enthalpies of formation in the gas phase at T = 298.15 K for uracil −(298.1 ± 0.6) and for thymine −(337.6 ± 0.9) kJ · mol⁻¹ have been derived from energies of combustion measured by static bomb combustion calorimetry and molar enthalpies of sublimation determined using the transpiration method. The G3 and G4 quantum-chemical methods were used for calculations of theoretical gaseous enthalpies of formation being in very good agreement with the re-measured experimental values.     

Standard molar enthalpies of formation of 2-, 3- and 4-cyanobenzoic acids

The standard (p = 0.1 MPa) molar enthalpies of formation of 2-, 3- and 4-cyanobenzoic acids were derived from their standard molar energies of combustion, in oxygen, at T = 298.15 K, measured by static bomb combustion calorimetry. The Calvet high temperature vacuum sublimation technique was used to measure the enthalpies of sublimation of 2- and 3-cyanobenzoic acids. The standard molar enthalpies of formation of the three compounds, in the gaseous phase, at T = 298.15 K, have been derived from the corresponding standard molar enthalpies of formation in the condensed phase and standard molar enthalpies for phase transition. The results obtained are −(150.7 ± 2.0) kJ · mol⁻¹, −(153.6 ± 1.7) kJ · mol⁻¹ and −(157.1 ± 1.4) kJ · mol⁻¹ for 2-cyano, 3-cyano and 4-cyanobenzoic acids, respectively. Standard molar enthalpies of formation were also estimated by employing two different methodologies: one based on the Cox scheme and the other one based on several different computational approaches. The calculated values show a good agreement with the experimental values obtained in this work.     

Proton-transfer tautomerism and enthalpies of formation of some isoquinoline derivatives

Ab initio molecular orbital theory has been used to calculate enthalpies of formation of the keto tautomers of 1-hydroxyisoquinoline, 5-hydroxyisoquinoline, and 1,5-dihydroxyisoquinoline. The high-level composite method G3//B3LYP has been used for this study, and the results have been compared with available experimental values. The keto tautomer is more favourable for 1-hydroxyisoquinoline and 1,5-dihydroxyisoquinoline, and the experimental enthalpies of formation are in better agreement with the theoretical enthalpies of formation of the keto forms.     

Calculation of the enthalpies of formation and proton affinities of some isoquinoline derivatives

Ab initio molecular orbital theory has been used to calculate enthalpies of formation of isoquinoline, 1-hydroxyisoquinoline, 5-hydroxyisoquinoline, and 1,5-dihydroxyisoquinoline as well as some pyridine and quinoline derivatives. The proton affinities of the four isoquinoline derivatives were also obtained. The high-level composite methods G3(MP2), G3(MP2)//B3LYP, G3//B3LYP, and CBS-QB3 have been used for this study, and the results have been compared with available experimental values. For six of the eight studied compounds, the theoretical enthalpies of formation were very close to the experimental values (to within 4.3 kJ · mol⁻¹); where comparison was possible, the theoretical and experimental proton affinities were also in excellent agreement with one another. However, there is an extraordinary discrepancy between theory and experiment for the enthalpies of formation of 1-hydroxyisoquinoline and 1,5-dihydroxyisoquinoline, suggesting that the experimental values for these two compounds should perhaps be re-examined. We also show that popular low cost computational methods such as B3LYP and MP2 show very large deviations from the benchmark values.     

Structural studies of cyclic ureas: 2. Enthalpy of formation of parabanic acid

Thermophysical and thermochemical studies have been carried out for crystalline parabanic acid. The thermophysical study was made by differential scanning calorimetry, DSC, over the temperature interval between T = (263 and 473) K. Two phase transitions were found: at T = (392.3 ± 1.6) K with the enthalpy of transition of (2.1 ± 0.4) kJ · mol⁻¹ and at T = (509.8 ± 1.5) K, when the compound was scanned to its fusion temperature. The standard (p = 0.1 MPa) molar enthalpy of formation, at T = 298.15 K, for crystalline parabanic acid was determined using static-bomb combustion calorimetry as −(590.2 ± 1.0) kJ · mol⁻¹. The standard molar enthalpy of sublimation, at T = 298.15 K, was derived from the variation of their vapour pressures, measured by the Knudsen-effusion method, with the temperature. These two thermochemical parameters yielded the standard molar enthalpy of formation in the gaseous phase, at T = 298.15 K, as −(470.8 ± 1.2) kJ · mol⁻¹.     

Thermochemistry of aqueous solutions of alkylated nucleic acid bases V. Enthalpies of hydration of N-methylated adenines

Enthalpies of solution in water, H _sol ^o , and of sublimation, H _subl ^o , were determined experimentally for a number of crystalline N-methyl adenines: m⁶Ade, m ₂ ^6,6 Ade, m⁹Ade, m ₂ ^6,9 Ade, and m ₃ ^6,6,9 Ade. Derived standard enthalpies of hydration H _hydr ^o , were corrected for the calculated cavity terms H _cav ^o to yield enthalpies of interaction H _int ^o of the solutes with their hydration shells. The increments of H _int ^o per unit area of the water-accessible molecular surface S _B , H _int ^o (CH₃)/S _B (CH₃), for the particular methyl groups: is considered to be the net effect of the gain in the energy resulting from van der Waals' interactions and of the loss in the energy due to polar interactions upon methyl substitution. It proved to vary somewhat numerically in agreement with the theoretically predicted hydration schemes of adenine. Comparison of H _int ^o /S _B value for adenine with those previously determined for uracil and thymine indicates that the aminopurine moiety is less hydrated than the diketopyrimidine ring.     

Di-hydroxybenzenes: Catechol, resorcinol, and hydroquinone: Enthalpies of phase transitions revisited

Molar enthalpies of sublimation of 1,2-di-hydroxybenzene, 1,3-di-hydroxybenzene, and 1,4-di-hydroxybenzene were obtained from the temperature dependence of the vapor pressure measured by the transpiration method. The molar enthalpies of fusion of 1,2- and 1,4-isomers were measured by differential scanning calorimetry (DSC). A large number of the primary experimental results on the temperature dependences of vapor pressure and phase transitions have been collected from the literature and have been treated in a uniform manner in order to derive sublimation, vaporization and fusion enthalpies of di-hydroxybenzenes at the reference temperature 298.15 K. The data sets on phase transitions were checked for internal consistency. This collection together with the new experimental results reported here has helped to resolve contradictions in the available thermochemical data and to recommend consistent and reliable sublimation, vaporization and fusion enthalpies for all three isomers under study.     

Thermochemistry of aqueous solutions of alkylated nucleic acid bases. VIII. Enthalpies of hydration of 6-alkyluracils

Enthalpies of solution in water H _sol ^o and enthalpies of sublimation H _sub ^o were determined for a number of crystalline derivatives of uracil: 1,6-dimethyluracil (m ₂ ^1,6 Ura), 1,3,6-trimethyluracil (m ₃ ^1,3,6 Ura), 6-ethyl-1,3-dimethyluracil (e⁶m ₂ ^1,3 Ura), 6-propyl-1,3-dimethyluracil (pr⁶m ₂ ^1,3 Ura) and 6-butyl-1,3-dimethyluracil (but⁶m ₂ ^1,3 Ura). Standard enthalpies of hydration H _hydr ^o and standard enthalpies of interaction H _int ^o of the solutes with their hydration shells were calculated. The data obtained show that dependence of H _int ^o on the number of-CH₂- groups of n-alkyl chain added upon substitution of diketopyrimidine ring is nonlinear. This finding is discussed in connection with results of X-ray diffraction structure determinations for the crystalline compounds.     

The standard enthalpies of formation of some dibenzoannelated cycloalkanols

The heats of combustion of trans-9,10-bis-hydroxymethyl-9,10-dihydrophenanthrene, trans-5-hydroxymethyl-5,6-dihydro-7H-dibenzo[a,c]cyclohepten-6-ol, 5-hydroxymethyl-5,6-dihydro-7H-di-benzo[a,c]cycloheptene, 6-hydroxymethyl-5,6-dihydro-7H-dibenzo[a,c]cycloheptene, 5H-dibenzo-[a,d]cyclohepten-5-ol and 5H-10,11-dihydrodibenzo[a,d]cyclohepten-5-ol were measured by means of a Gallenkamp adiabatic bomb calorimeter. Uncertainties in the determination of the heats of combustion ranged between 0.2 and 0.3%. The enthalpies of formation and atomization for the six compounds were derived. The experimental values of the heats of atomization were compared with those calculated using the Allen–Skinner bond energy scheme. Conclusions about energetic contributions which stabilize the structure of the investigated compounds were drawn.     

Benchmark thermodynamic properties of alkanediamines: Experimental and theoretical study

Vapor pressures of (dl)-1,2-propanediamine and 2-methyl-1,2-propanediamine were measured using the transpiration method. Molar enthalpies of vaporization were derived from the vapor pressure temperature dependence. Thermodynamic data on alkanediamines available in the literature were collected and treated uniformly. Consistency of the experimental data set for alkanediamines was evaluated with group-contribution and quantum-chemical methods.The standard molar entropy of formation and the standard molar Gibbs function of formation have been calculated. Vaporization and formation enthalpies of alkanediamines of benchmark quality are recommended for practical thermochemical calculations and validation of empirical and theoretical methods.     

Thermochemistry of organosilicon compounds VII. Permethylcyclosilazanes and 1,1,3,3-tetramethyldisilazane

The enthalpy of formation (ΔH_f⁰), enthalpy of evaporation (ΔH_v⁰) and enthalpy of atomization (ΔH_a) of permethylcyclosilazanes (Me₂SiNH)_n (n = 3, 4) and 1,1,3,3-tetramethyldisilazane (Me₂SiH)₂NH have been determined. The enthalpies of formation of these compounds were compared with those calculated by the Benson-Buss-Franklin and Tatevskii additive schemes. In higher permethylcyclosilazanes the energy of the endocyclic Si---N bond is 306 ± 2 kJ mol⁻¹ (73 kcal mol⁻¹), that is 12 ± 2 kJ mol⁻¹ (3 kcal mol⁻¹) lower than the energy of the acyclic Si---N bond. The strain energy of the cyclotrisilazane ring is estimated to be 10.5 kJ mol⁻¹ (2.5 kcal mol⁻¹), whereas the energy of the ring Si---N bond is 295 kJ mol⁻¹ (70.5 kcal mol⁻¹).

The thermochemical data for permethylcyclosilazanes were compared with the corresponding values for permethylcyclosiloxanes calculated from the results of previously reported studies.     

Experimental and Theoretical Investigation on the Thermochemistry of 3-Methyl-2-benzoxazolinone and 6-Nitro-2-benzoxazolinone

The determination of the reliable thermodynamic properties of 2-benzoxazolinone derivatives is the main goal of this work. Some correlations are established between the energetic properties determined and the structural characteristics of the title compounds, and the reactivity of this class of compounds is also evaluated. Static-bomb combustion calorimetry and high-temperature Calvet microcalorimetry were used to determine, respectively, the standard molar enthalpies of formation in the solid state and the standard molar enthalpies of sublimation, both at T = 298.15 K. Using the results obtained for each compound, the respective gas-phase standard molar enthalpy of formation was derived. High-level quantum chemical calculations were performed to estimate the same property and the results evidence good accordance. Moreover, the gas-phase relative thermodynamic stability of 2-benzoxazolinone derivatives was also evaluated using the respective gas-phase standard molar Gibbs energy of formation. In addition, the relationship between the energetic and structural characteristics of the benzoxazolinones is presented, evidencing the enthalpic increments associated with the presence of a methyl and a nitro groups in the molecule, and this effect is compared with similar ones in other structurally related compounds.     

Correlations between MO eigenvectors and enthalpies of formation for simple organic substances

Bondingness, originally used in a qualitative analysis of the barrier to rotation in ethane, has been used to model Δ_fH° (g) for simple organic substances. The model is parameterised with a set of 345 molecules including alkanes, alkenes, alkynes, alcohols, ethers, aldehydes, ketones, carboxylic acids, esters, alkenoates, amines, amides, diazenes, nitriles, nitroalkanes, nitrates, thiols and benzenoids. The model is compared with a current empirical scheme as well as a comparison of variations of the model using different simple steric potentials. Using bondingness and the most approximate quantum chemical models a model can be formulated that is comparable with empirical group methods but requiring less parameters.     

Thermochemistry of heteroatomic compounds 22. Enthalpies of combustion and formation of alkyl(aryl)arsines and arsenites in the condensed and gaseous phases

The enthalpies of combustion (ΔH _comb) of five primary, secondary, and tertiary alkyl(aryl)arsines in the condensed state were calculated using the equation ΔH _comb = −385.8–110.3N, where N is the number of bond-forming electrons. The dependence presented is used for the calculation of the enthalpies of combustion of full esters and amidoesters of arsinous acid of noncyclic and cyclic structures. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1042–1043, May, 2007.     

Thermochemistry of Amines: Experimental Standard Molar Enthalpies of Formation of N-Alkylated Piperidines

The standard molar enthalpies of formation _f H _m ^° (l) at the temperature T = 298.15 K were determined using combustion calorimetry for N-methylpiperidine (A), N-ethylpiperidine (B), N-propylpiperidine (C), N-butylpiperidine (D), N-cyclopentylpiperidine (E), N-cyclohexylpiperidine (F), and N-phenylpiperidine (G). The standard molar enthalpies of vaporization _l ^g H ^{m °} of these compounds were obtained from the temperature variation of the vapor pressure measured in a flow system. From these data the following standard molar enthalpies of formation in gaseous phase _f H _m ^° (g) were derived for: A –(61.39 ± 0.88); B –(88.1 ± 1.3); C –(105.81 ± 0.66); D –(126.2 ± 1.3); E ( –88.21 ± 0.75); F –(135.21 ± 0.94); G (70.3 ± 1.4) kJ · mol^–1. They are used to determine the strain enthalpies of the cyclic amines A–G. The N-alkylated piperidine rings have been found to be about strainless.     

Thermochemistry of Aqueous Solutions of Alkylated Nucleic Acid Bases. X. Enthalpies of Hydration of Cytosine and some Methylated, Hydroxy and Methoxy Derivatives of Cytosine

Enthalpies of solution in water, vapor pressures, and enthalpies of sublimation were determined for cytosine and a number of crystalline derivatives of cytosine: 1-methylcytosine, 1-methyl-N ⁴-hydroxycytosine, 1,5-methyl-N ⁴-methoxycytosine, 1,N ⁴,N ⁴-trimethylcytosine, 1,5,N ⁴-trimethylcytosine, 1,5-dimethyl-N ⁴-methoxycytosine, and l,N ⁴-dimethyl-5-ethylcytosine. Enthalpies of hydration were calculated. The latter were analyzed on the basis of the group additivity method. The relation between enthalpy of hydration and polarity of compounds is discussed.