Controlling the hydrophobicity of submicrometer silica spheres via surface modification for nanocomposite applications

We control the hydrophobicity of submicrometer silica spheres by modifying their surface with -CH3, -CH=CH2, -(CH2)(2)CH3, -CH2(CH2)(4)CH2-, -C(6)H(5), -(CH2)(7)CH3, and -(CH2)(11)CH3 groups through a modified one-step process. The scanning electron microscopy (SEM), quasi-elastic light scattering (QELS), UV-visible spectra, nitrogen sorption, and water vapor adsorption methods are used to characterize the particles. The SEM micrographs of the particles demonstrate that the modified particles are uniformly spherical, monodisperse, and well-shaped with the particle size ranging from 130 to 149 nm depending on the modified organic groups. In aqueous solution, the particles modified with phenyl groups have an obvious UV absorption peak at around 210 nm, whereas the other modified particles and unmodified particles do not have any UV-visible absorption peaks. There exist obvious differences in the amount of water vapor adsorbed depending on the type of surface functional groups of the modified particles. Compared with the unmodified particles, the modified particles have a lower water vapor adsorption because of the improved hydrophobicity of the particle surface. As a potential application, we prepared polystyrene/SiO2 nanocomposites by blending polystyrene with the synthesized particles. Water contact angle measurements show that the surface of the composite prepared with the modified particles are more hydrophobic. Confocal microscopy demonstrates that the particles are less agglomerated in the nanocomposite as the particles become more hydrophobic. These comprehensive experimental results demonstrate that the hydrophobicity of the particles can be easily controlled by surface modification with different organosilanes through a modified one-step process.     

Surface properties of submicrometer silica spheres modified with aminopropyltriethoxysilane and phenyltriethoxysilane

The surface of submicrometer silica spheres are modified with aminopropyl and phenyl groups through a one-step process. Various experimental techniques, i.e., scanning electron microscopy (SEM), quasi-elastic light scattering (QELS), differential scanning calorimetry (DSC), thermogravimetry (TG), zeta potential measurement, nitrogen sorption, and water vapor and organic dye adsorption are used to comprehensively characterize the pure (TEOS particles) and modified silica particles. The SEM micrographs of the particles demonstrate that the modified particles are spherical with uniform size and shape. The particles modified with aminopropyl groups (APTES particles) show the highest isoelectric point (IEP) and the highest weight loss at 780 degrees C because of the basic nature of aminopropyl groups and the higher reactivity of aminopropyltriethoxysilane. The particles modified with the phenyl groups (PhTES particles) show the lowest water vapor adsorption because their surface is more hydrophobic than that of TEOS and APTES particles. The organic dye (brilliant blue FCF or BBF) adsorption experiments demonstrate that the adsorption capacity of the particles increases greatly after acidification. This is caused by the protonation of silanol groups and amine groups on the particle surface, which presents an enhanced electrostatic attraction with BBF anions. The APTES particles exhibit the highest dye adsorption due to the hydrophobic attractions and the enhanced electrostatic attractions from aminopropyl groups.     

Inorganic-organic hybrid nanoparticles from n-octyl triethoxy silane

Ormosil (organically modified silane) such as n-octyl triethoxy silane has been found to aggregate in the form of normal micelles as well as reverse micelles in which the triethoxy silane moeities are hydrolyzed to form a hydrated silica network while the n-octyl groups are held together through hydrophobic interaction. These nanoparticles are spherical in shape and are nearly monodispersed with an average diameter of below 100 nm. The nanoparticles originating from the micellar aggregate have an hydrophobic core with a layer of the hydrated silica network at the surface. The hydrophobic core can host hydrophobic molecules such as tetraphenyl porphyrin, which is leached out of the particles extremely slowly compared to that in Triton X-100 micelles. The nanoparticles originating from the reverse micelles have a hydrated silica network in the core surrounded by the hydrophobic n-octyl chains on the particle surface. The hydrophilic silica cores of these nanoparticles have been used to encapsulate horseradish peroxidase (HRP) and the enzyme shows its activity and follows Michaelis-Menten kinetics.     

Surface modified ormosil nanoparticles

Organically modified silanes (ORMOSIL) such as vinyl triethoxysilane readily aggregate in the aqueous cores of reverse micelles where the triethoxysilane moieties are hydrolyzed to form a hydrated silica network and the vinyl groups protruded out from the surface of the nanoparticles toward the hydrophobic side of the micellar interface. These particles are spherical and the size distribution of the particles is relatively narrow, with an average diameter of 87 nm. Surface vinyl silica nanoparticles so formed have been oxidized to surface carboxylic silica nanoparticles, followed by chemical conjugation with polyethyleneglycol amine (PEG amine) through the ethyl-3-(3-dimethylaminopropyl) (EDCI) carbodiimide reaction. The characteristic surface groups have been identified by Fourier transform infrared spectroscopy, while the size and the morphology of the particles have been studied by dynamic light scattering and transmission electron microscopy. It has been found that about 80-85% of the carboxylic groups are PEGylated during the EDCI reaction.     

Fluorescent quantification of amino groups on silica nanoparticle surfaces

Functionalization of the surfaces of silica particles is often the first step in their various applications. An improved heterogeneous Fmoc-Cl fluorescent assay using an aqueous solution was developed to detect the number of amino groups on solid-phase supports. The fluorescent Fmoc-Cl method is 50-fold more sensitive than the current UV assay using an organic solvent. This method, together with the homogeneous fluorescamine and OPA assays, is used to detect amino groups on the silica particle surface. The accuracy and effect factors of these methods were examined and the assays were optimized. The results showed that the amine groups on silica particles can produce stronger fluorescence than small amine molecules in solution, because the porous structure of the particle surface is a more hydrophobic environment. The number of active amino groups that can be conjugated with biomolecules is much less than the total number of amino groups on the silica particle. Compared with physical methods, chemical assays involving direct reaction with amino groups would furnish the closest result to the number of active amino groups on the particle surface.     

CONCERNING THE ORIGIN OF CHARGE AT THE POLYSTYRENE PARTICLE/WATER INTERFACE

The electrophoretic mobility behavior of well-characterized polystyrene latex particles, carrying one type of surface functional endgroups, has been studied as a function of pH. At low pH, the interaction of protons with the functional endgroups increased in the order: Hydroxyl > carboxyl > sulfate; at high pH the order of interaction was reversed; and at intermediate pH no interactions were observed. The particles of the polystyrene latexes in their different forms at the intermediate pH range, dispersed in deionized water, all exhibited the same mobility irrespective of the functional endgroup. The origin of charge in these systems is explained as being the result of either the preferential adsorption of hydroxyl ions or an electron - injection mechanism due to the overlap of local intrinsic molecular - ion states in polystyrene and water. At low concentrations of functional endgroups, the surface properties of the polystyrene latexes are largely dependent upon the hydrophobic nature of the surface.     

单分散SiO2/PS复合粒子的制备

聚合物包覆无机物的核一壳结构复合粒子研究长期以来受到关注,源于其应用广泛．根据表面性质要求对无机相或者有机相表面进行功能化,可使得到的复合粒子与不同的应用体系相匹配．这类聚合物包覆无机物的有机／无机复合粒子,已在光学器件、分离、药品、农业、涂料等很多领域有广泛和潜在应用．本文制备这类复合粒子用于石油工业模型催化剂和助剂．     

苯基化硅胶的物理结构和表面性质的研究

本文利用苯基三氯硅烷和硅胶表面羟基反应制备了苯基化硅胶。测定了苯基化硅胶的物理结构、水蒸气吸附等温线、润湿热、差热分析(DTA)和红外光谱(IR)。结果表明,所有苯基化硅胶的真密度(dT)、比表面(S)和比孔体积(V)均减少, 而表观密度(dA)增加, 但苯基化对不同硅胶的平均孔半径(r)有不同的影响; 苯基化硅胶对水蒸气吸附, 对水、苯和环己烷的润湿热均显著减少; 苯基化硅胶的热稳定性大于甲基化硅胶, 甲基化硅胶的表面是高度憎水的, 但苯基化硅胶的憎水性则很弱。     

The structure of modifying layers and identification of residual hydrophilic groups on modified silica surface by the adsorption and chromatographic measurements

Amorphous silica Silochrom-80 is modified in a liquid phase in two stages with poly(ethylhydrosiloxane) and hexamethyldisilazane. Adsorption studies suggest that the modified silicas have a porous structure. Hexamethyldisilazane is found to have an active role in the modification of the secondary porous structure of the samples. The thickness of modifying layers on the surface of the samples is calculated. Residual hydrophilic sites are identified on the modified silica surface, and their concentration is determined using chromatography data and the parameters of the Langmuir equation. It is shown that the two-stage modification of silica with the selected reagents makes it possible to entirely deactivate the most active vicinal hydroxyl groups on the sorbent surface and, to a substantial extent, its isolated hydroxyl groups.     

Interfacial water on hydrophobic surfaces recognized by ions and molecules

Recent spectrophotometric and molecular dynamics simulation studies have shown that the physicochemical properties and structures of water in the vicinity of hydrophobic surfaces differ from those of the bulk water. However, the interfacial water acting as a separation medium on hydrophobic surfaces has never been detected and quantified experimentally. In this study, we show that small inorganic ions and organic molecules differentiate the interfacial water formed on the surfaces of octadecyl-bonded (C(18)) silica particles from the bulk water and the chemical separation of these solutes in aqueous media with hydrophobic materials can be interpreted with a consistent mechanism, partition between the bulk water phase and the interfacial water formed on the hydrophobic surface. Thermal transition behaviour of the interfacial water incorporated in the nanopores of the C(18) silica materials and the solubility parameter of the water calculated from the distribution coefficients of organic compounds have indicated that the interfacial water may have a structure of disrupted hydrogen bonding. The thickness of the interfacial water or the limit of distance from the hydrophobic surface at which molecules and ions can sense the surface was estimated to be 1.25 ± 0.13 nm from the volume of the interfacial water obtained by a liquid chromatographic method and the surface area, suggesting that the hydrophobic effect may extend beyond the first solvation shell of water molecules directly surrounding the surfaces.     

Efficient synthesis of asymmetric particles by sol-gel process

This paper presents a novel and facile method of synthesizing polymer/silica particles with controlled asymmetric morphologies. Our approach is based on the sol–gel process in which cross-linked polystyrene particles (CPS) are adopted as templates and 3-mercaptopropyltriethoxysilane is used as a single silica source. The reaction process causes silane oligomer to preferentially grow on the local surface of CPS, giving rise to polystyrene/thiol-functionalized silica composite particles with a tunable shape. It is found that the morphologies of particles can be easily tailored by changing the ratio of ethanol/water in the reaction medium. In addition, the amount of cross-linker used during the polymerization also plays a key role in the formation of various complex-shaped particles. Controlled geometries of these organic/inorganic composite particles will allow a broad range of potential applications, such as photonic crystals, Pickering emulsifier, sensors, and so on.     

A facile method for preparing sticky, hydrophobic polymer surfaces

Textured surfaces consisting of nanometer- to micrometer-sized lightly sulfonated polystyrene ionomer (SPS) particles were prepared by rapid evaporation of the solvent from a dilute polymer solution-cast onto silica. The particle textured ionomer surfaces were prepared by either spin-coating or solution-casting ionomer solutions at controlled evaporation rates. The effects of the solvent used to spin-coat the film, the molecular weight of the ionomer, and the rate of solvent evaporation on the surface morphology of cast films were investigated. The surface morphologies were consistent with a spinodal decomposition mechanism, where the surface first existed as a percolated-like structure and then ripened into droplets if molecular mobility was retained for sufficient time. The SPS particles or particle aggregates were robust and resisted separation from the surface even after annealing at 120 °C for 1 week. The water contact angles on as-prepared surfaces were relatively low, ～90°, due to the polar groups in the ionomer, but when the surface was modified by chemical vapor deposition of 1H,1H,2H,2H-perfluorooctyltrichlorosilane, the surface contact angles increased to ～109° on smooth surfaces and up to ～140° on the textured surfaces. Although the surfaces were hydrophobic, the contact angle hysteresis was relatively high and water droplets stuck to these surfaces even when the surface was turned upside down.     

含氟硅丙烯酸酯乳液超疏水膜中疏水基团的梯度分布与表面微观结构研究

利用含氟疏水基团的梯度分布,结合草莓形纳米SiO2粒子提供的双重粗糙表面,制备了具有类"荷叶效应"的超疏水涂膜,水接触角达(174.2±2)°,滞后角几乎接近0°.通过原子力显微镜、扫描电镜和水接触角的测试对膜表面形貌及疏水性能进行了表征;探讨了其表面微观结构与表面疏水性能的关系.草莓形复合粒子在膜表面的无规则排列赋予涂膜表面不同等级的粗糙度,使水滴与涂膜表面接触时能够形成高的空气捕捉率,这种微观结构与疏水基团的梯度分布相结合,赋予了含氟硅丙烯酸酯乳液涂膜表面超疏水性能.     

Molecular packing of lysozyme,fibrinogen, and bovine serum albumin on hydrophilic and hydrophobic surfaces studied by infrared-visible sum frequency generation and fluorescence microscopy

Infrared-visible sum frequency generation (SFG) vibrational spectroscopy, in combination with fluorescence microscopy, was employed to investigate the surface structure of lysozyme, fibrinogen, and bovine serum albumin (BSA) adsorbed on hydrophilic silica and hydrophobic polystyrene as a function of protein concentration. Fluorescence microscopy shows that the relative amounts of protein adsorbed on hydrophilic and hydrophobic surfaces increase in proportion with the concentration of protein solutions. For a given bulk protein concentration, a larger amount of protein is adsorbed on hydrophobic polystyrene surfaces compared to hydrophilic silica surfaces. While lysozyme molecules adsorbed on silica surfaces yield relatively similar SFG spectra, regardless of the surface concentration, SFG spectra of fibrinogen and BSA adsorbed on silica surfaces exhibit concentration-dependent signal intensities and peak shapes. Quantitative SFG data analysis reveals that methyl groups in lysozyme adsorbed on hydrophilic surfaces show a concentration-independent orientation. However, methyl groups in BSA and fibrinogen become less tilted with respect to the surface normal with increasing protein concentration at the surface. On hydrophobic polystyrene surfaces, all proteins yield similar SFG spectra, which are different from those on hydrophilic surfaces. Although more protein molecules are present on hydrophobic surfaces, lower SFG signal intensity is observed, indicating that methyl groups in adsorbed proteins are more randomly oriented as compared to those on hydrophilic surfaces. SFG data also shows that the orientation and ordering of phenyl rings in the polystyrene surface is affected by protein adsorption, depending on the amount and type of proteins.     

Surfacial,liquid sorption and monolayer-forming properties of hydrophilic and hydrophobic Stöber silica particles

The surface of silica spheres with a diameter of 500 nm was modified with ethoxysilane. Hydrophilic and partially hydrophobic silica spheres were obtained, suitable for the preparation of two-dimensional monoparticle films at the liquid-air interface. The tendency of these particles to self-assemble is basically dependent on surface hydrophobicity. Liquid sorption excess isotherms were studied in ethanol-cyclohexane and ethanol-chloroform mixtures with the aim of characterizing the adsorption capacity of the particles. Specific surface area and porosity were measured by nitrogen adsorption. The specific surface area determined by liquid sorption was considerably larger than determined by gas adsorption. This is ascribed to penetration of ethanol into the pores and the swelling of the silica particles in ethanol. Surface modification of hydrophilic particles changed the film-forming properties of the particles. The compressibility and the lift-off area of the monolayer films of hydrophobic particles on water were higher than for the films of hydrophilic particles.     

Photochemical deposition of SERS active silver nanoparticles on silica gel and their application as catalysts for the reduction of aromatic nitro compounds

We report an impregnation technique for immobilization of silver(I) gelatin complex on silica gel. Subsequent UV exposure of the dry impregnated silica gel deposited silver nanoparticles on the solid matrix. Conventional techniques (UV-visible spectroscopy, TEM, EDAX, and thermal analysis) have been used to identify and characterize silver particles on silica surfaces. The photoproduced silver particles have shown unique SERS activity that authenticates the presence of silver nanoclusters in the silica matrix. Hence, the surface of the silica matrix remains SERS-active for months. This surface activity of the silica matrix inspired us to successfully study the catalytic reduction of nitro-compounds in aqueous, organic, and three different micellar media. Different thermodynamic parameters for the reduction processes have also been evaluated. Catalytic activity of the particles in micelles is explained in the light of hydrophobic and electrostatic interactions between the substrate and the micelles.     

有机电解质在胶束催化聚苯乙烯氯甲基化反应中的作用

在实施聚苯乙烯氯甲基化反应的胶束催化体系中加入四丁基溴化铵 ((Bu)₄NBr, TBAB), 研究了有机电解质TBAB对胶束催化反应的影响规律. 实验结果表明, 在非离子表面活性剂NP-10及阴离子表面活性剂SDS的胶束催化体系中, TBAB的加入使聚苯乙烯氯甲基化反应的速率明显增大, 前者尤为突出；而在阳离子表面活性剂CTAB的胶束催化体系中, TBAB的加入几乎对反应速率无促进作用. 这种结果一方面归因于加入电解质TBAB会降低SDS的临界胶束浓度, 从而增强对聚苯乙烯四氯化碳溶液的增溶能力；更主要的原因是TBAB的丁基与表面活性剂碳氢链间的疏水相互作用会使季铵离子(Bu)₄N⁺嵌入SDS的胶束之中, 结合到NP-10的胶束表面, 使SDS胶束的阴离子头基对亲核取代反应(控制步骤)的禁阻作用得以减缓, 使NP-10的胶束表面携带了正电荷, 显著促进亲核取代反应的进行, 而对于CTAB的胶束, 由于静电排斥作用, 季铵离子(Bu)₄N⁺不能接近CTAB的胶束, 故TBAB的加入对聚苯乙烯氯甲基化反应不产生作用.     

Facile fabrication and self‐assembly of polystyrene–silica asymmetric colloid spheres

This study presents a very simple method to fabricate organic–inorganic asymmetric colloid spheres. In this approach, when silica particles are used as the Pickering emulsifier to stabilize the monomer droplets (styrene) in water via acid–base interaction between silica particles and auxiliary monomer (1‐vinylimidazole), the exposed surfaces of silica particles are very easy to be locally modified with 3‐(trimethoxysilyl)propyl methacrylate. When water‐based initiator is added, polystyrene–silica asymmetric colloid spheres are highly yielded. The sizes of silica and polymer particles can be tunable. These organic–inorganic anisotropic colloid spheres can self‐assemble into an interesting thickness‐dependent film. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Effect of hydrophobicity on the stability of sol–gel silica coatings in vacuum and their laser damage threshold

Silica antireflective coatings modified by hexamethyldisilazane (HMDS) were deposited on clean substrates (silicon wafer or K9 glass blanks) by sol–gel processing. The effects of HMDS on the contamination resistant capability and laser-induced damage threshold (LIDT) of coatings were investigated. Transmission electron microscopy revealed that a stable sol with uniformly distributed silica particles with an average particle size of about 15 nm was acquired by adding appropriate amount of HMDS into the standard SiO₂ sol. With the modified sol the resultant coatings were hydrophobic and the contact angle for water increased with increasing amount of HMDS in the reaction mixture. Such increase in hydrophobicity was not the result of surface roughness. The antireflective properties were retained after HMDS-treatment and the maximum transmission values were above 99 %. The introduction of HMDS into silica sols had also increased the LIDT of coatings from 24.3 to 37.0 J cm^?2 when the molar ratio of HMDS to tetraethoxysilane was 0.05:1. The increase in LIDT was attributed to the decrease of nodular defect and uniform microstructures of coatings as an effect of the HMDS modification. After some of the hydroxyl groups on the surface of the SiO₂ particle were replaced by methyl groups, from which the SiO₂ particle gained a water-repellent surface, the stability of coatings in vacuum was increased. The maximum transmission values of modified coatings decreased by only 0.25 % after storage under vacuum for 168 h. In contrast, the standard sol–gel silica coatings decreased about 2 % under similar conditions. The LIDT of modified coatings remained as high as 30.8 J cm^?2, more than that of standard coatings stored for the same duration in air.     

Biomimetic synthesis of raspberry-like hybrid polymer–silica core–shell nanoparticles by templating colloidal particles with hairy polyamine shell

The nanoparticles composed of polystyrene core and poly[2-(diethylamino)ethyl methacrylate] (PDEA) hairy shell were used as colloidal templates for in situ silica mineralization, allowing the well-controlled synthesis of hybrid silica core–shell nanoparticles with raspberry-like morphology and hollow silica nanoparticles by subsequent calcination. Silica deposition was performed by simply stirring a mixture of the polymeric core–shell particles in isopropanol, tetramethyl orthosilicate (TMOS) and water at 25 °C for 2.5 h. No experimental evidence was found for nontemplated silica formation, which indicated that silica deposition occurred exclusively in the PDEA shell and formed PDEA–silica hybrid shell. The resulting hybrid silica core–shell particles were characterized by transmission electron microscopy (TEM), thermogravimetry, aqueous electrophoresis, and X-ray photoelectron spectroscopy. TEM studies indicated that the hybrid particles have well-defined core–shell structure with raspberry morphology after silica deposition. We found that the surface nanostructure of hybrid nanoparticles and the composition distribution of PDEA–silica hybrid shell could be well controlled by adjusting the silicification conditions. These new hybrid core–shell nanoparticles and hollow silica nanoparticles would have potential applications for high-performance coatings, encapsulation and delivery of active organic molecules.