PRIMARY INTERMEDIATES IN THE PULSED IRRADIATION OF RETINOIDS

Abstract Laser flash photolysis and pulse radiolysis have led to the characterisation of several shortlived intermediates formed after irradiation of retinoic acid and retinyl acetate in hexane or methanol. For retinoic acid, the triplet state, wavelength maximum 440 nm, extinction coefficient 7.3 × 10⁴ dm³ mol^?1 cm^?1, decay constant 6.2 × 10⁵ s^?1, is formed with a quantum yield of 0.012 for 347 nm excitation. The radical cation, absorption maximum 590 nm, extinction coefficient ～7 × 10⁴ dm³mol^?1 cm^?1, is formed in a biphotonic process. The radical anion, absorption maximum 510nm in hexane, 480 nm in methanol where its extinction coefficient is 1.2 × 10⁵ dm³mol^?1 cm^?1, appears to decay partially in methanol into another longer-lived neutral radical, wavelength maximum 420 nm, by loss of OH^?. For retinyl acetate, the triplet state, absorption maximum 395 nm, extinction coefficient 7.9 × 10⁴dm³mol^?1 cm^?1, decay constant 1.2 × 10⁶s^?1 is formed with a quantum yield of 0.025 for 347 nm excitation. Monophotonic photoelimination of OCOCH₃? in methanol produces the retinylic carbenium ion, wavelength maximum 590 nm, whose decay is enhanced by ammonia, k ～ 2 × 10⁶ dm³ mol^?1 s^?1 and retarded by water. The radical cation also has a wavelength maximum at 590 nm, its extinction coefficient being ～ 1.0 × 10⁵ dm³mol¹ cm^?1. The long-lived transient absorption with maximum at 385 nm, extinction coefficient 1.0 × 10⁵ dm³mol^?1 cm^?1, obtained from the reaction of the solvated electron with retinyl acetate in methanol may be due to either the radical anion itself or more likely the radical resulting from elimination of OCOCH₃? from this anion. These results suggest that skin photosensitivity caused by retinyl acetate might be greater than that due to retinoic acid.     

High-Pressure Stopped-Flow Study of the Kinetics of Base Hydrolysis of the Dichromate Ion by Hydroxide Ion,Ammonia, Water,and 2,6-Lutidine in Aqueous Solution

Volumes of activation for the base hydrolysis of the dichromate anion have been measured at 298.2 K, using high-pressure stopped-flow spectrophotometry. The values of ΔV* (cm³ · mol^?1), ? 17.9 ± 0.6, ? 19.2 ± 0.9, ? 24.9 ± 0.9 and ? 26.0 ± 0.7 for OH^?, NH₃, H₂O and 2,6-lutidine, respectively, are consistent with an interchange mechanism with associative activation mode (I^a).     

Studies of the reaction of the hydroxyl radical with the oxalate ion in an acidic aqueous solution by pulse radiolysis

The reaction of the · OH radical with the oxalate ion in an acidic aqueous solution was studied by pulse radiolysis. The rate constant for the reaction of formation of the radical HOOC-COO·(λ_max = 250 nm, ɛ = 1800 L mol⁻¹ cm⁻¹) is (5.0±0.5)·107 L mol⁻¹ s⁻¹. In the reaction with the hydrogen ion (k = 1.1·10⁷ L mol⁻¹ s⁻¹), the radical HOOC-COO· is transformed into a nonidentified radical designated arbitrarily as H⁺(HOOC-COO)· (λ_max = 260 nm, ɛ = 4000 L mol⁻¹ cm⁻¹). Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1165–1167, June, 2008.     

Kinetics and mechanism of the reduction of monochloramine by hydroxylamine and hydroxylammonium ion

The kinetics and mechanism by which monochloramine is reduced by hydroxylamine in aqueous solution over the pH range of 5–8 are reported. The reaction proceeds via two different mechanisms depending upon whether the hydroxylamine is protonated or unprotonated. When the hydroxylamine is protonated, the reaction stoichiometry is 1:1. The reaction stoichiometry becomes 3:1 (hydroxylamine:monochloramine) when the hydroxylamine is unprotonated. The principle products under both conditions are Cl^–, NH⁺₄, and N₂O. The rate law is given by ?[d[NH₂Cl]/dt] = k₊[NH₃OH⁺][NH₂Cl] + k₀[NH₂OH][NH₂Cl]. At an ionic strength of 1.2 M, at 25°C, and under pseudo‐first‐order conditions, k₊= (1.03 ± 0.06) ×10³ L · mol^?1 · s^?1 and k₀=91 ± 15 L · mol^?1 · s^?1. Isotopic studies demonstrate that both nitrogen atoms in the N₂O come from the NH₂OH/NH₃OH⁺. Activation parameters for the reaction determined at pH 5.1 and 8.0 at an ionic strength of 1.2 M were found to be ΔH? = 36 ± 3 kJ · mol^–1 and Δ S? = ?66 ± 9 J · K^?1 · mol^?1, and Δ H? = 12 ± 2 kJ · mol^?1 and Δ S? = ?168 ± 6 J · K^?1 · mol^?1, respectively, and confirm that the transition states are significantly different for the two reaction pathways. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 38: 124–135, 2006     

Calcichrome: a re-examination of its structure and chemical properties by solid- and liquid-state NMR,infrared spectroscopy,and selective chemical degradation

Nuclear magnetic resonance and infrared spectroscopies were used to unravel the controversies regarding the structures of calcichrome and calcion. Together with the identification of the products from selective chemical cleavage reactions, these data indicate that structures of both compounds are equivalent with a molecular formula of C₂₀H₁₄N₂O₁₅S₄·3H₂O (2,8,8′-trihydroxy-1,1′-azonaphthelene-3,6,3′,6′-tetrasulfonic acid). The compound has two titratable phenolic protons in aqueous solution with pK_a values of 7.19 ± 0.05 and 11.63 ± 0.05 at 25 ° C. As a ligand, the compound forms a colored complex with calcium(II) at a 1:1 stoichiometric ratio (pH 12.3) with a formation constant of 8.0 × 10³ at 25 ° C. The free form of the ligand at pH 12.3 has a molar maximum molar absorptivity of 1.44 × 10⁴ l mol^?1 cm^?1 at 599 nm, whereas the complexed form has a maximum molar absorptivity of 1.37 × 10⁴ l mol^? cm^?1 at 522 nm.     

Primary Photoprocesses in a Fluoroquinolone Antibiotic Sarafloxacin†

The photophysical properties of the fluoroquinolone antibiotic sarafloxacin (SFX) were investigated in aqueous media. SFX in water, at pH 7.4, shows intense absorption with peaks at 272, 322 and 335 nm, (? = 36800 and 17000 dm³ mol^?1 cm^?1, respectively). Both the absorption and emission properties of SFX are pH‐dependent; pK_a values for the protonation equilibria of both the ground (5.8 and 9.1) and excited singlet states (5.7 and 9.0) of SFX were determined spectroscopically. SFX fluoresces weakly, the quantum yield for fluorescence emission being maximum (0.07) at pH 8. Laser flash photolysis and pulse radiolysis studies have been carried out in order to characterize the transient species of SFX in aqueous solution. Triplet–triplet absorption has a maximum at 610 nm with a molar absorption coefficient of 17,000 ± 1000 dm³ mol^?1 cm^?1. The quantum yield of triplet formation has been determined to be 0.35 ± 0.05. In the presence of oxygen, the triplet reacts to form excited singlet oxygen with quantum yield of 0.10. The initial triplet (³A*) was found to react with phosphate buffer to form triplet ³B* with lower energy and longer lifetime and having an absorption band centered at 700 nm. SFX triplet was also found to oxidize tryptophan to its radical with concomitant formation of the anion radical of SFX. Hence the photosensitivity of SFX could be initiated by the oxygen radicals and/or by SFX radicals acting as haptens.     

Kinetic Studies on the Reaction of Sodium Hexacyanoferrate（ll） Complex with Peroxydisulfate Anion

The oxidation of Na₄Fe(CN)₆ complex by S₂O anion was found to follow an outer‐sphere electron transfer mechanism. We firstly carried out the reaction at pH=1. The specific rate constants of the reaction, k_ox, are (8.1±0.07)×10^?2 and (4.3±0.1)×10^?2 mol^?1·L·s^?1 at μ=1.0 mol·L^?1 NaClO₄, T=298 K for pH=1 (0.1 mol·L^?1 HCl0₄) and 8, respectively. The activation parameters, obtained by measuring the rate constants of oxidation 283–303 K, were ΔH^≠=(69.0±5.6) kJ·mol^?1, ΔS^≠=(?0.34±0.041)×10² J·mol^?1·K^?1 at pH=l and ΔH^≠=(41.3±5.5) kJ·mol^?1, ΔS^≠=(?1.27±0.33)×10² J·mol^?1·K^?1 at pH=8, respectively. The cyclic voltammetry of Fe(CN) shows that the oxidation is a one‐electron reversible redox process with E_1/2 values of 0.55 and 0.46 V vs. normal hydrogen electrode at μ=1.0 mol·L^?1 LiClO₄, for pH=1 and pH=8 (Tris). respectively. The kinetic results were discussed on the basis of Marcus theory.     

Laser flash photolysis of aqueous acetaminophen solutions

The N-acetyl-4-aminophenoxyl radical, a supposed intermediate of the enzymatic oxidation of acetaminophen in living organisms, was prepared and studied by means of nanosecond laser flash photolysis. A number of important spectral-kinetic parameters of this species were determined, namely, the absorption coefficient at 440 nm ((4.2±0.2)×10³ l mol^?1cm^?1), the quantum yield of acetaminophen photoionization at 266 nm (φ= 0.03), and the rate constants for recombination (2k= (2.4±0.3))×10⁹ l mol^?1s^?1) and the reaction with the superoxide radical (k= (9±2))×10⁹ l mol^?1s^?1).     

Extraction-spectrophotometric determination of nickel in steels and aluminium metal with 3-(2-pyridyl)-5,6-diphenyl-1,2,4-triazine and ethyl tetrabromophenolphthalein

Nickel ions react with 3-(2-pyridyl)-5,6-diphenyl-1,2,4-triazine in aqueous solution at pH 6.8 to form a red 1:3 complex cation which can be extracted at pH 6.3 into 1,2-dichloroethane with ethyl tetrabromophenolphthalein anion as an ion association compound having an absorption maximum at 610 nm. The apparent molar absorptivity is 2.21 × 10⁵ l mol^?1 cm^?1 and a linear calibration graph is obtained in the range 0–0.05 μg ml^?1 (0?8.52 × 10^?7 M) nickel in aqueous solution. The r.s.d, is 1.5%. This method can be applied to the determination of traces of nickel in steels and aluminium chips.     

Kinetics of the reaction of the sulfate radical with the oxalate anion

The kinetics of the reaction of the sulfate radical, SO₄⁻, with the oxalate anion C₂O₄²⁻ was studied in aqueous solution and second-order rate constants, corrected for the effects of ionic strength, derived. Measurements were carried out over the temperature range 24–60°C resulting in the expression k₀ = 2.10 ± 0.96 × 10⁸ exp(−1080 ± 140/T) L mol⁻¹ s⁻¹. © 1996 John Wiley & Sons, Inc.     

Volumes of activation for the reactions of Pentacyanocobaltate(III) Complexes in aqueous solution

The volumes of activation in cm³ mol^?1 for the aquation of Co(CN)₅X^3? were determined at 40°C and μ = 1 M (NaClO₄) to be + 7.8 ± 0.5 for X = Cl^?, + 7.6 ± 0.6 for X = Br^?, + 14.0 ± 0.7 for X = I^?, and + 16.8 ± 0.5 for X = N₃^? (0.1 M HClO₄), respectively. The volumes of activation for the aquation of Co(CN)₅Cl^3? at μ = 0.1 M are + 10.0 ± 0.6 cm³ mol^?1 and ± 9.1 ± 0.3 cm³ mol^?1 at 40°C and 25°C, respectively. The corresponding values for the anation of Co(CN)₅OH₂^2? (at 40°C) and μ = 1 M by Br^?, I^?, and NCS^? are +8.4 ± 1.0, +9.4 ± 1.6, and +8.2 ± 0.9 cm³ mol^?1, respectively. These data are discussed in terms of a dissociative (D) mechanism.     

Electrolytically generated sulfur dioxide anion radical S2O·−4, its absorption coefficient and some of its decay reactions

The electrochemical reduction of SO₂ in dimethylformamide at Pt electrodes finally leads to the red species S₃O^2?₆ via the blue complex S₂O^·?₄. The UV-VIS absorption coefficients are determined: ?(S₂O^·?₄) = (224 ± 25) × 10⁵ cm² mol^?1; ?(S₃O^2?₆) = (0.64 + 0.07) × 10⁵ cm² mol^?1. A calculation of the complexing constant of SO₂ with free SO^·?₂ radical based on potential shifts confirms this constant to be in the range of 200–700 1 mol^?1.Two potentiometric titration methods (viz: with allylbromide and tetraethylammoniumtribromide) for analysis of electrolytically generated S^III-oxo-anions in DMF are presented. Reactions of those anions with aromatic aldehydes and trials for trapping of possibly formed SO are described.     

Rate constants for the reactions of O3 and OH radicals with a series of alkynes

Rate constants for the reactions of O₃ and OH radicals with acetylene, propyne, and 1-butyne have been determined at room temperature. The rate constants obtained at 294 ± 2 K for the reactions of O₃ with acetylene, propyne, and 1-butyne were (7.8 ± 1.2) × 10^?21 cm³/molecule · s, (1.43 ± 0.15) × 10^?20 cm³/molecule · s, and (1.97 ± 0.26) × 10^?20 cm³/molecule · s, respectively. The rate constants at 298 ± 2 K and atmospheric pressure for the reactions with the OH radical, relative to a rate constant for the reaction of OH radicals with cyclohexane of 7.57 × 10^?12 cm³/molecule · s, were determined to be (8.8 ± 1.4) × 10^?13 cm³/molecule · s, (6.21 ± 0.31) × 10^?12 cm³/molecule · s, and (8.25 ± 0.23) × 10^?12 cm³/molecule · s for acetylene, propyne, and 1-butyne, respectively. These data are discussed and compared with the available literature rate constants.     

2,2′-Dihydroxybenzophenone thiosemicarbazone as a spectrophotometric reagent for the determination of copper,cobalt, nickel,and iron trace amounts in mixtures without previous separations

2,2′-Dihydroxybenzophenone thiosemicarbazone forms complexes with Cu(II) (λ_max = 385 nm, ? = 8.60 × 10³ liter · mol^?1 · cm^?1); Ni(II) (λ_max = 380 nm, ? = 15.4 × 10³ liter · mol^?1 · cm^?1); Co(II) (λ_max = 380 nm, ? = 12.3 × 10³ liter · mol^? · cm^?1); and Fe(III) (λ_max = 365 nm, ? = 7.9 × 10³ liter · mol^?1 · cm^?1) and have been applied to the analysis of these metal ions in binary, ternary, and quaternary mixtures. The determination procedures are based exclusively on the different pH values of the formation complexes, hence the extraction step is not necessary.     

Spectrophotometric study of complexes of mercury(II) with mono- and dithiosemicarbazones

The formation of complexes at pH 4.7 of the Hg(II) with five monothiosemicarbazone and two dithiosemicarbazone has been studied. The mercury(II) reacts with monothiosemicarbazones of salicylaldehyde (λ_max = 363 nm, E = 1.69 × 10⁴liters · mol^?1cm^?1), pi-colinadehyde (λ_max = 363 nm, E = 2.38 × 10⁴liters · mol^?1cm^?1), 6-methyl-picolinaldehyde (λ_max = 363 nm, E = 2.28 × 10⁴liters · mol^?1cm^?1), di-2-pyridylketone (λ_max = 380 nm, E = 2.08 × 10⁴liters · mol^?1cm^?1), and o-naphthoquinone (λ_max = 540 nm, E = 1.03 × 10⁴liters · mol^?1cm^?1) and with dithiosemicarbazones of 1,4-dihydroxyphthalimide (λ_max = 430 nm, E = 2.56 × 10⁴liters · mol^?1cm^?1) and dipyridylglyoxal (λ_max = 363 nm, E = 2.37 × 10⁴liters · mol^?1cm^?1). A critical comparison of the stoichiometry and apparent stability constant of complexes with mono- and dithiosemicarbazones is given.     

Rate coefficients for the gas‐phase reaction of OH radicals with selected dihydroxybenzenes and benzoquinones

Rate coefficients have been determined for the gas‐phase reaction of the hydroxyl (OH) radical with the aromatic dihydroxy compounds 1,2‐dihydroxybenzene, 1,2‐dihydroxy‐3‐methylbenzene and 1,2‐dihydroxy‐4‐methylbenzene as well as the two benzoquinone derivatives 1,4‐benzoquinone and methyl‐1,4‐benzoquinone. The measurements were performed in a large‐volume photoreactor at (300 ± 5) K in 760 Torr of synthetic air using the relative kinetic technique. The rate coefficients obtained using isoprene, 1,3‐butadiene, and E‐2‐butene as reference hydrocarbons are k_OH(1,2‐dihydroxybenzene) = (1.04 ± 0.21) × 10⁻¹⁰ cm³ s⁻¹, k_OH(1,2‐dihydroxy‐3‐methylbenzene) = (2.05 ± 0.43) × 10⁻¹⁰ cm³ s⁻¹, k_OH(1,2‐dihydroxy‐4‐methylbenzene) = (1.56 ± 0.33) × 10⁻¹⁰ cm³ s⁻¹, k_OH(1,4‐benzoquinone) = (4.6 ± 0.9) × 10⁻¹² cm³ s⁻¹, k_OH(methyl‐1,4‐benzoquinone) = (2.35 ± 0.47) × 10⁻¹¹ cm³ s⁻¹. This study represents the first determination of OH radical reaction‐rate coefficients for these compounds. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 696–702, 2000     

氢过碘酸）合银（III）配离子氧化L-脯氨酸的反应动力学及机理

L-脯氨酸独有的亚胺基使其在生物医药领域具有许多独特的功能,并广泛用作不对称有机化合物合成的有效催化剂。本文在碱性介质中研究了二（氢过碘酸）合银（III）配离子氧化 L-脯氨酸的反应。经质谱鉴定,脯氨酸氧化后的产物为脯氨酸脱羧生成的 γ-氨基丁酸盐;氧化反应对脯氨酸及Ag(III) 均为一级;二级速率常数 k′ 随 [IO₄^-] 浓度增加而减小,而与 [OHˉ] 的浓度几乎无关;推测反应机理应包括 [Ag(HIO₆)₂]^5-与 [Ag(HIO₆)(H₂O)(OH)]^2-之间的前期平衡,两种Ag（III）配离子均作为反应的活性组分,在速控步被完全去质子化的脯氨酸平行地还原,两速控步对应的活化参数为： k₁ (25 ^oC)＝1.87±0.04（mol·L^-1)^-1s^-1,∆ H₁^≠＝45±4 kJ · mol^-1, ∆ S₁^≠＝-90±13 J· K^-1·mol^-1 and k₂ (25 ^oC) ＝3.2±0.5（mol·L^-1)^-1s^-1, ∆ H₂^≠＝34±2 kJ · mol^-1, ∆ S₂^≠＝-122 ±10 J· K^-1·mol^-1。本文第一次发现 [Ag(HIO₆)₂]^5-配离子也具有氧化反应活性。     

The temperature dependence of the OH radical reactions with some aromatic compounds under simulated tropospheric conditions

The temperature dependence of the rate coefficients for the OH radical reactions with toluene, benzene, o-cresol, m-cresol, p-cresol, phenol, and benzaldehyde were measured by the competitive technique under simulated atmospheric conditions over the temperature range 258–373 K. The relative rate coefficients obtained were placed on an absolute basis using evaluated rate coefficients for the corresponding reference compounds. Based on the rate coefficient k(OH + 2,3-dimethylbutane) = 6.2 × 10^?12 cm³ molecule^?1s^?1, independent of temperature, the rate coefficient for toluene k_OH = 0.79 × 10^?12 exp[(614 ± 114)/T] cm³ molecule^?1 s^?1 over the temperature range 284–363 K was determined. The following rate coefficients in units of cm³ molecule^?1 s^?1 were determined relative to the rate coefficient k(OH + 1,3-butadiene) = 1.48 × 10^?11 exp(448/T) cm³ molecule^?1 s^?1: o-cresol; k_OH = 9.8 × 10^?13 exp[(1166 ± 248)/T]; 301–373 K; p-cresol; k_OH = 2.21 × 10^?12 exp[(943 ± 449)/T]; 301–373 K; and phenol, k_OH = 3.7 × 10^?13 exp[(1267 ± 233)/T]; 301–373 K. The rate coefficient for benzaldehyde k_OH = 5.32 × 10^?12 exp[(243 ± 85)/T], 294–343 K was determined relative to the rate coefficient k(OH + diethyl ether) = 7.3 × 10^?12 exp(158/T) cm³ molecule^?1 s^?1. The data have been compared to the available literature data and where possible evaluated rate coefficients have been deduced or updated. Using the evaluated rate coefficient k(OH + toluene) = 1.59 × 10^?12 exp[(396 ± 105)/T] cm³ molecule^?1 s^?1, 213–363 K, the following rate coefficient for benzene has been determined k_OH = 2.58 × 10^?12 exp[(?231 ± 84)/T] cm³ molecule^?1 s^?1 over the temperature range 274–363 K and the rate coefficent for m-cresol, k_OH = 5.17 × 10^?12 exp[(686 ± 231)/T] cm³ molecule^?1 s^?1, 299–373 K was determined relative to the evaluated rate coefficient k(OH + o-cresol) = 2.1 × 10^?12 exp[(881 ± 356)/T] cm³ molecule^?1 s^?1. The tropospheric lifetimes of the aromatic compounds studied were calculated relative to that for 1,1,1-triclorethane = 6.3 years at 277 K. The lifetimes range from 6 h for m-cresol to 15.5 days for benzene. © 1995 John Wiley & Sons, Inc.     

Analytical applications of picolinealdehyde salicyloylhydrazone: II. Extraction and spectrophotometric determination of vanadium(V)

Picolinealdehyde salicyloylhydrazone reacts with vanadium(V) to produce a yellow 1:1 complex (λ_max = 400 nm, ? = 2.17 × 10⁴ liters · mol^?1 cm^?1) in aqueous ethanolic solution. The yellow complex can be extracted into chlorobenzene (λ_max = 425 nm, ? = 2.16 × 10⁴ liters · mol^?1 cm^?1) and used for the spectrophotometric determination of trace amounts of vanadium. Interferences have been investigated. The method has been applied to the determination of vanadium in steel and in lead concentrates.     

Pulse radiolysis of butyl acrylate in aqueous solution

The pulse radiolysis of n-butyl acrylate (nBA) in aqueous solution was studied. The rate constant of the reaction of nBA with hydroxyl radicals was calculated as 1.5×10¹⁰ dm³ mol⁻¹ s⁻¹. The absorption spectrum of the OH^·–nBA adduct appeared to have a broad maximum at 300 nm. This spectrum was attributed to the α-carbon centred radicals. It decayed with the first-order rate constant k=1.5×10⁴ s⁻¹ (pH 10.8). The rate constant of the nBA reaction with hydrated electrons was determined as k=1.6×10¹⁰ dm³ mol⁻¹ s⁻¹. The spectrum of H^·–nBA adduct was similar to that recorded for OH^· adduct. It decayed with first-order kinetics at k=1.0×10⁴ s⁻¹. Spectra of the electron adduct were characterised by the band with a maximum at 285 nm (pH 10.0) or at 280 nm (pH 4.0) with ϵ=10 500 dm³ mol⁻¹ cm⁻¹. In acidic solution, radical anion formed upon addition of hydrated electrons to the nBA molecule, undergoes fast, reversible protonation. The decay of the reversibly protonated electron adduct was a second-order process at k=2.5×10⁹ dm³ mol⁻¹ s⁻¹. This reaction took place at the carbonyl oxygen. Slow, irreversible protonation of the electron adduct at high pH takes place at the β-carbon atom at k=2.9×10⁴ s⁻¹.