Component Selection in the Self‐Assembly of Palladium(II) Nanocages and Cage‐to‐Cage Transformations

Dynamic supramolecular systems involving a tetratopic palladium(II) acceptor and three different pyridine‐ and imidazole‐based donors have been used for self‐selection by a synergistic effect of morphological information and coordination ability of ligands through specific coordination interactions. Three different cages were first synthesized by two‐component self‐assembly of individual donor and acceptor. When all four components were allowed to interact in a reaction mixture, only one out of three cages was isolated. The preferential binding affinity towards a particular partner was also established by transforming a non‐preferred cage into a preferred cage by interaction with the appropriate ligand. Computational studies further supported the fact that coordination interaction of imidazole moiety to Pd^II is enthalpically more preferred compared to pyridine, which drives the selection process. Analysis of crystal packing of both complexes indicated the presence of strong hydrogen bonds between nitrate and water molecules and also H‐bonded 3D networks of water. Both complexes exhibit promising proton conductivity (10^?5 to ca. 10^?3 S cm^?1) at ambient temperature under a relative humidity of circa 98 % with low activation energy.     

Proton‐Conducting Hydrogen‐Bonded 3D Frameworks of Imidazo‐Pyridine‐Based Coordination Complexes Containing Naphthalene Disulfonates in Rhomboid Channels

Coordination complexes of an olefinic molecule (PIP) containing pyridine and imidazopyridine moieties with Zn^II/Ni^II metal salts were shown to exhibit appreciable proton conductivity. These complexes form 3D‐hydrogen bonded frameworks containing rhomboidal channels that are occupied by uncoordinated 1,5‐naphthalenedisulfonate (NDS). The extensive hydrogen bonding between the frameworks and NDS resulted in thermally stable and water‐insoluble materials. Irrespective of the metal atom present, both complexes exhibited moderate to high proton conduction in the range of 10^?5 to 0.5×10^?3 S cm^?1 depending on the temperature and humidity levels.     

Periodicity in proton conduction along a H‐bonded chain. Application to biomolecules

Molecular complexes are constructed to simulate proton transfer channels of the influenza A virus and of the active site of carbonic anhydrase. These complexes consist of proton donor and acceptor groups connected by a chain of water molecules. Quantum chemical calculations on the methylimidazole(H⁺)? H₂O? CH₃COO^? model of the M2 virus channel indicate free translational motion of the water molecule between donor and acceptor, as well as concerted transfer of both H‐bond protons. The proton transfer barrier does not depend on the position of the bridged water molecule and varies linearly with the difference of electrostatic potentials between the donor and acceptor. When the water chain is elongated, and with various donor and acceptor models, periodicity appears in the H‐bond lengths and the progression of proton transfer in each link. This “wave” is shown to propagate along the chain, as it is driven by the displacement of a single proton. One can thereby estimate the velocity of the proton wave and proton conduction time. Computations are performed to examine the influence of immersing the system within a polarizable medium. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

Tetrathiafulvalene‐Fused Porphyrins via Quinoxaline Linkers: Symmetric and Asymmetric Donor–Acceptor Systems

A tetrathiafulvalene (TTF) donor is annulated to porphyrins (P) via quinoxaline linkers to form novel symmetric P–TTF–P triads 1 a – c and asymmetric P–TTF dyads 2 a , b in good yields. These planar and extended π‐conjugated molecules absorb light over a wide region of the UV/Vis spectrum as a result of additional charge‐transfer excitations within the donor–acceptor assemblies. Quantum‐chemical calculations elucidate the nature of the electronically excited states. The compounds are electrochemically amphoteric and primarily exhibit low oxidation potentials. Cyclic voltammetric and spectroelectrochemical studies allow differentiation between the TTF and porphyrin sites with respect to the multiple redox processes occurring within these molecular assemblies. Transient absorption measurements give insight into the excited‐state events and deliver corresponding kinetic data. Femtosecond transient absorption spectra in benzonitrile may suggest the occurrence of fast charge separation from TTF to porphyrin in dyads 2 a , b but not in triads 1 a – c . Clear evidence for a photoinduced and relatively long lived charge‐separated state (385 ps lifetime) is obtained for a supramolecular coordination compound built from the ZnP–TTF dyad and a pyridine‐functionalized C₆₀ acceptor unit. This specific excited state results in a (ZnP–TTF)^?+ ??? (C₆₀py)^?? state. The binding constant of Zn^II ??? py is evaluated by constructing a Benesi–Hildebrand plot based on fluorescence data. This plot yields a binding constant K of 7.20×10⁴ M ^?1, which is remarkably high for bonding of pyridine to ZnP.     

Proton Transport in a Highly Conductive Porous Zirconium‐Based Metal–Organic Framework: Molecular Insight

The water stable UiO‐66(Zr)‐(CO₂H)₂ MOF exhibits a superprotonic conductivity of 2.3×10^?3 S cm^?1 at 90 °C and 95 % relative humidity. Quasi‐elastic neutron scattering measurements combined with aMS‐EVB3 molecular dynamics simulations were able to probe individually the dynamics of both confined protons and water molecules and to further reveal that the proton transport is assisted by the formation of a hydrogen‐bonded water network that spans from the tetrahedral to the octahedral cages of this MOF. This is the first joint experimental/modeling study that unambiguously elucidates the proton‐conduction mechanism at the molecular level in a highly conductive MOF.     

The Metal–Metal‐to‐Ligand Charge Transfer Excited State and Supramolecular Polymerization of Luminescent Pincer PdII–Isocyanide Complexes

Pincer Pd^II–isocyanide complexes are described that display intermolecular interactions and emissive ³MMLCT excited states in aggregation state(s) at room temperature. The intermolecular Pd^II?Pd^II and ligand–ligand interactions drive these complexes to undergo supramolecular polymerization in a living manner. Comprehensive spectroscopic studies reveal a pathway with a kinetic trap that can be modulated by changing the counteranion and metal atom. The Pd^II supramolecular assemblies comprise two different aggregation forms with only one to be emissive. DFT/TDDFT calculations lend support to the MMLCT absorption and emission of these pincer Pd^II–isocyanide aggregates.     

Synthesis and properties of new dialkoxyphenylene quinoxaline‐based donor‐acceptor conjugated polymers and their applications on thin film transistors and solar cells

Synthesis, properties, and optoelectronic device applications of four new bis‐[4‐(2‐ethyl‐hexyloxy)‐phenyl]quinoxaline( Qx(EHP) )‐based donor‐acceptor conjugated copolymers are reported, in which the donors are thiophene( T ), dithiophene( DT ), dioctylfluorene( FO ), and didecyloxyphenylene( OC10 ). The optical band gaps (E_g) of PThQx(EHP) , PDTQ(EHP) , POC10DTQ(EHP) , and PFODTQ(EHP) estimated from the onset absorption are 1.57, 1.65, 1.77, and 1.92 eV, respectively. The smallest E_g of PThQx(EHP) among the four copolymers is attributed to the balanced donor/acceptor ratio and backbone coplanarity, leading to a strong intramolecular charge transfer. The hole mobilities obtained from the thin film transistor (TFT) devices of PThQx(EHP) , PDTQ(EHP) , POC10DTQ(EHP) , and PFODTQ(EHP) are 2.52 × 10^?4, 4.50 × 10^?3, 4.72 × 10^?5, and 9.31 × 10^?4 cm² V^?1 s^?1, respectively, with the on‐off ratios of 2.00 × 10⁴, 1.89 × 10³, 4.07 × 10³, and 2.30 × 10⁴. Polymer solar cell based on the polymer blends of PFODTQ(EHP) , PThQx(EHP) , POC10DTQ(EHP) , and PDTQ(EHP) with [6, 6]‐phenyl C61‐butyric acid methyl ester (PCBM) under illumination of AM1.5 (100 mW cm^?2) solar simulator exhibit power conversion efficiencies of 1.75, 0.92, 0.79, and 0.43%, respectively. The donor/acceptor strength, molecular weight, miscibility, and energy level lead to the difference on the TFT or solar cell characteristics. The present study suggests that the prepared bis[4‐(2‐ethyl‐hexyloxy)‐phenyl]quinoxaline donor‐acceptor conjugated copolymers would have promising applications on electronic device applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 973–985, 2009     

Polycarboxylate‐Templated Coordination Polymers: Role of Templates for Superprotonic Conductivities of up to 10−1 S cm−1

Three coordination polymers (CPs) have been synthesized based on a [Co(bpy)(H₂O)₄]²⁺ chain (bpy=4,4′‐bipyridine) by a template approach. The frameworks are neutralized by different templated polycarboxylate anions (furan di‐carboxylate (fdc) in Co‐fdc, benzene tri‐carboxylate (btc) in Co‐tri and benzene tetra‐carboxylate (btec) in Co‐tetra). These templates with different degrees of protonation and ionic carrier concentration played significant role on crystal packing as well as formation of well‐directed H‐bonded networks which made these CPs perform well in proton conduction (PC). The PC value reaches to 1.49×10^?1 S cm^?1 under 80 °C and 98 % relative humidity (R.H.) for Co‐tri, which is the highest among CPs/MOFs/COFs and is an example of conductivity in the order of 10^?1 S cm^?1. Co‐tri and Co‐tetra are excellent proton conductors at mild temperature (40 °C) and 98 % R.H. (conductivities up to 2.92×10^?2 and 1.38×10^?2 S cm^?1, respectively).     

Hydrogen‐Bonded Organic Frameworks (HOFs): A New Class of Porous Crystalline Proton‐Conducting Materials

Two porous hydrogen‐bonded organic frameworks (HOFs) based on arene sulfonates and guanidinium ions are reported. As a result of the presence of ionic backbones appended with protonic source, the compounds exhibit ultra‐high proton conduction values (σ) 0.75× 10^?2 S cm^?1 and 1.8×10^?2 S cm^?1 under humidified conditions. Also, they have very low activation energy values and the highest proton conductivity at ambient conditions (low humidity and at moderate temperature) among porous crystalline materials, such as metal–organic frameworks (MOFs) and covalent organic frameworks (COFs). These values are not only comparable to the conventionally used proton exchange membranes, such as Nafion used in fuel cell technologies, but is also the highest value reported in organic‐based porous architectures. Notably, this report inaugurates the usage of crystalline hydrogen‐bonded porous organic frameworks as solid‐state proton conducting materials.     

Self‐Assembled Pd6 Open Cage with Triimidazole Walls and the Use of Its Confined Nanospace for Catalytic Knoevenagel‐ and Diels–Alder Reactions in Aqueous Medium

The two‐component self‐assembly of a 90° Pd^II acceptor and a triimidazole donor led to the formation of a water‐soluble semi‐cylindrical cage with a hydrophobic cavity, which was separately crystallized with hydrophilic‐ and hydrophobic guests. The parent cage was found to catalyze the Knoevenagel condensation reaction of a series of aromatic mono‐aldehydes with active methylene compounds, such as Meldrum′s acid or 1,3‐dimethylbarbituric acid. The confined hydrophobic nanospace within this cage was also used in the catalytic Diels–Alder reactions of 9‐hydroxymethylanthracene with N‐phenylmaleimide or N‐cyclohexylmaleimide.     

Polybenzimidazoles tethered with N‐phenyl 1,2,4‐triazole units as polymer electrolytes for fuel cells

Polybenzimidazole (PBI) polymers tethered with N‐phenyl 1,2,4‐triazole (NPT) groups were prepared from a newly synthesized aromatic diacid, 3′‐(4‐phenyl‐4H‐1,2,4‐triazole‐3,5‐diyl) dibenzoic acid (PTDBA). The obtained polymers show superior thermal and chemical stability and good solubility in many aprotic solvents. The inherent viscosities of all polymers were around 1 dL/g. They exhibit high thermal stability with initial decomposition temperature ranging from 515 to 530 °C, high glass transition temperature ranging from 375 to 410 °C, and good mechanical properties with tensile stress in the range of 66–98 MPa and modulus 1897–2600 MPa. XRD analysis indicates that these polymers are amorphous in nature. Physicochemical properties such as water and phosphoric acid‐uptake, oxidative stability, and proton conductivity of membranes of these polymers have also been determined. The proton conductivity ranged from 4.7 × 10^?3 to 1.8 × 10^?2 S cm^?1 at 175 °C in dry conditions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2289–2303, 2009     

Combined Intrinsic and Extrinsic Proton Conduction in Robust Covalent Organic Frameworks for Hydrogen Fuel Cell Applications

Developing new materials for the fabrication of proton exchange membranes (PEMs) for fuel cells is of great significance. Herein, a series of highly crystalline, porous, and stable new covalent organic frameworks (COFs) have been developed by a stepwise synthesis strategy. The synthesized COFs exhibit high hydrophilicity and excellent stability in strong acid or base (e.g., 12 m NaOH or HCl) and boiling water. These features make them ideal platforms for proton conduction applications. Upon loading with H₃PO₄, the COFs (H₃PO₄@COFs) realize an ultrahigh proton conductivity of 1.13×10^?1 S cm^?1, the highest among all COF materials, and maintain high proton conductivity across a wide relative humidity (40–100 %) and temperature range (20–80 °C). Furthermore, membrane electrode assemblies were fabricated using H₃PO₄@COFs as the solid electrolyte membrane for proton exchange resulting in a maximum power density of 81 mW cm^?2 and a maximum current density of 456 mA cm^?2, which exceeds all previously reported COF materials.     

Catalytic Behavior of Mono‐N‐Protected Amino‐Acid Ligands in Ligand‐Accelerated C−H Activation by Palladium(II)

Mono‐N‐protected amino acids (MPAAs) are increasingly common ligands in Pd‐catalyzed C?H functionalization reactions. Previous studies have shown how these ligands accelerate catalytic turnover by facilitating the C?H activation step. Here, it is shown that MPAA ligands exhibit a second property commonly associated with ligand‐accelerated catalysis: the ability to support catalytic turnover at substoichiometric ligand‐to‐metal ratios. This catalytic role of the MPAA ligand is characterized in stoichiometric C?H activation and catalytic C?H functionalization reactions. Palladacycle formation with substrates bearing carboxylate and pyridine directing groups exhibit a 50–100‐fold increase in rate when only 0.05 equivalents of MPAA are present relative to Pd^II. These and other mechanistic data indicate that facile exchange between MPAAs and anionic ligands coordinated to Pd^II enables a single MPAA to support C?H activation at multiple Pd^II centers.     

Guest‐Assisted Proton Conduction in the Sulfonic Mesoporous MIL‐101 MOF

Post‐synthesis modification of MIL‐101(Cr)‐NO₂ was explored in order to decorate the organic backbone by propyl‐sulfonic groups, with the aim to incorporate mobile and acidic protons for solid‐state proton electrolyte applications. The resulting solid switched from insulating towards proton superconductive behavior under humidity, while the conductivity recorded at 363 K and 95 % relative humidity reached 4.8×10^?3 S cm^?1. Propitiously, the impregnation of the material by strong acidic molecules (H₂SO₄) further boosted the proton conductivity performances up to the remarkable σ value of 1.3×10^?1 S cm^?1 at 363 K/95 % RH, which reaches the performances of the best proton conductive MOF reported so far.     

Water‐Stable Homochiral Cluster Organic Frameworks Built by Two Kinds of Large Tetrahedral Cluster Units

Compared with metal organic frameworks (MOFs), the proton conductivity of cluster organic frameworks has been less studied. Herein, two supertetrahedral cluster organic frameworks (SCOFs) have been made that show two‐fold interpenetrated networks built by trivalent lanthanide tetrahedral clusters and monovalent cuprous T₃‐supertetrahedral clusters. The structure analysis, second harmonic generation signals, and solid‐state circular dichroism spectroscopy consistently reveal the chirality of these SCOFs. Remarkably, the water‐stable SCOFs show a high proton conductivity value of 1.4×10^?3 S cm^?1 at 80 °C and 95 % RH (relative humidity).     

Ultrafast Photoinduced Energy and Electron Transfer in Multi‐Modular Donor–Acceptor Conjugates

New multi‐modular donor–acceptor conjugates featuring zinc porphyrin (ZnP), catechol‐chelated boron dipyrrin (BDP), triphenylamine (TPA) and fullerene (C₆₀), or naphthalenediimide (NDI) have been newly designed and synthesized as photosynthetic antenna and reaction‐center mimics. The X‐ray structure of triphenylamine‐BDP is also reported. The wide‐band capturing polyad revealed ultrafast energy‐transfer (k_ENT=1.0×10¹² s^?1) from the singlet excited BDP to the covalently linked ZnP owing to close proximity and favorable orientation of the entities. Introducing either fullerene or naphthalenediimide electron acceptors to the TPA‐BDP‐ZnP triad through metal–ligand axial coordination resulted in electron donor–acceptor polyads whose structures were revealed by spectroscopic, electrochemical and computational studies. Excitation of the electron donor, zinc porphyrin resulted in rapid electron‐transfer to coordinated fullerene or naphthalenediimide yielding charge separated ion‐pair species. The measured electron transfer rate constants from femtosecond transient spectral technique in non‐polar toluene were in the range of 5.0×10⁹–3.5×10¹⁰ s^?1. Stabilization of the charge‐separated state in these multi‐modular donor–acceptor polyads is also observed to certain level.     

Modulation of electronic properties of π‐conjugated copolymers derived from naphtho[1,2‐b:5,6‐b′]dithiophene donor unit: A structure‐property relationship study

A set of three donor‐acceptor conjugated (D‐A) copolymers were designed and synthesized via Stille cross‐coupling reactions with the aim of modulating the optical and electronic properties of a newly emerged naphtho[1,2‐b:5,6‐b′]dithiophene donor unit for polymer solar cell (PSCs) applications. The PTNDTT‐BT , PTNDTT‐BTz , and PTNDTT‐DPP polymers incorporated naphtho[1,2‐b:5,6‐b′]dithiophene ( NDT ) as the donor and 2,2′‐bithiazole ( BTz ), benzo[1,2,5]thiadiazole ( BT ), and pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione ( DPP ), as the acceptor units. A number of experimental techniques such as differential scanning calorimetry, thermogravimetry, UV–vis absorption spectroscopy, cyclic voltammetry, X‐ray diffraction, and atomic force microscopy were used to determine the thermal, optical, electrochemical, and morphological properties of the copolymers. By introducing acceptors of varying electron withdrawing strengths, the optical band gaps of these copolymers were effectively tuned between 1.58 and 1.9 eV and their HOMO and LUMO energy levels were varied between ?5.14 to ?5.26 eV and ?3.13 to ?3.5 eV, respectively. The spin‐coated polymer thin film exhibited p‐channel field‐effect transistor properties with hole mobilities of 2.73 × 10^?3 to 7.9 × 10^?5 cm² V^?1 s^?1. Initial bulk‐heterojunction PSCs fabricated using the copolymers as electron donor materials and [6,6]‐phenyl C71 butyric acid methyl ester (PC₇₁BM) as the acceptor resulted in power conversion efficiencies in the range of 0.67–1.67%. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2948–2958     

Induced‐Fit Binding of π‐Electron‐Donor Substrates to Macrocyclic Aromatic Ether Imide Sulfones: A Versatile Approach to Molecular Assembly

Novel macrocyclic receptors that bind electron‐donor aromatic substrates through π‐stacking donor–acceptor interactions are obtained by cycloimidisation of an amine‐functionalised aryl ether sulfone with pyromellitic and 1,4,5,8‐naphthalenetetracarboxylic dianhydrides. These macrocycles can form complexes with a wide variety of π‐donor substrates, including tetrathiafulvalene, naphthalene, anthracene, pyrene, perylene and functional derivatives of these polycyclic hydrocarbons. The resulting supramolecular assemblies range from simple 1:1 complexes to [2]‐ and [3]pseudorotaxanes and even (as a result of crystallographic disorder) an apparent polyrotaxane. Direct five‐component self‐assembly of a metal‐centred [3]pseudorotaxane is also observed on complexation of a macrocyclic ether imide with 8‐hydroxyquinoline in the presence of palladium(II) ions. Binding studies in solution were carried out by using ¹H NMR and UV/Vis spectroscopy, and the stoichiometries of binding were confirmed by Job plots based on the charge‐transfer absorption bands. The highest association constants were found for strong π‐donor guests with large surface areas, notably perylene and 1‐hydroxypyrene, for which K_a values of 1.4×10³ and 2.3×10³ M ^?1, respectively, were found. Single‐crystal X‐ray analyses of the receptors and their derived complexes reveal large induced‐fit distortions of the macrocyclic frameworks as a result of complexation. These structures provide compelling evidence for the existence of strong attractive forces between the electronically complementary aromatic π systems of host and guest.     

Superchiral Pd3L6 Coordination Complex and Its Reversible Structural Conversion into Pd3L3Cl6 Metallocycles

Large, non‐symmetrical, inherently chiral bispyridyl ligand L derived from natural ursodeoxycholic bile acid was used for square–planar coordination of tetravalent Pd^II, yielding the cationic single enantiomer of superchiral coordination complex 1 Pd₃ L ₆ containing 60 well‐defined chiral centers in its flower‐like structure. Complex 1 can readily be transformed by addition of chloride into a smaller enantiomerically pure cyclic trimer 2 Pd₃ L ₃Cl₆ containing 30 chiral centers. This transformation is reversible and can be restored by the addition of silver cations. Furthermore, a mixture of two constitutional isomers of trimer, 2 and 2′ , and dimer, 3 and 3′ , can be obtained directly from L by its coordination to trans‐ or cis‐N‐pyridyl‐coordinating Pd^II. These intriguing, water‐resistant, stable supramolecular assemblies have been thoroughly described by ¹H DOSY NMR, mass spectrometry, circular dichroism, molecular modelling, and drift tube ion‐mobility mass spectrometry.     

The First Demonstration of the Gyroid in a Polyoxometalate‐Based Open Framework with High Proton Conductivity

The fabrication of extended open frameworks with crystalline ordering on the atomic level by following peculiar mathematical geometry (e.g. Möbius band, Klein bottle, periodic minimal surfaces, etc.) is challenging, but extremely beneficial for discovering non‐trivial structure‐dependent properties. In light of this, we herein report the first polyoxometalate‐based open framework (POM‐OF) that definitely lies on the gyroid (G)‐minimal surface, which was constructed by a rare pair of chiral POM enantiomers and zinc ions. Due to the presence of the proton carriers (i.e., water, Na⁺, [(Bu)₄N]⁺, etc.) in the resultant gyroidal channels, with pore dimensions on the order of the quasi‐mesoporous scale, this compound shows a high proton conductivity of 1.04×10^?2 S cm^?1 at a relative humidity of 75 % (80 °C), and also exhibits enormous potential in the application of electrochemical catalysis.