Highly Concentrated Aqueous Dispersions of Graphene Exfoliated by Sodium Taurodeoxycholate: Dispersion Behavior and Potential Application as a Catalyst Support for the Oxygen‐Reduction Reaction

A high‐yielding exfoliation of graphene at high concentrations in aqueous solutions is critical for both fundamental study and future applications. Herein, we demonstrate the formation of stable aqueous dispersions of pristine graphene by using the surfactant sodium taurodeoxycholate under tip sonication at concentrations of up to 7.1 mg mL^?1. TEM showed that about 8 % of the graphene flakes consisted of monolayers and 82 % of the flakes consisted of less than five layers. The dispersions were stable regardless of freezing (?20 °C) or heat treatment (80 °C) for 24 h. The concentration could be significantly improved to about 12 mg mL^?1 by vacuum‐evaporation of the dispersions at ambient temperature. The as‐prepared graphene dispersions were readily cast into conductive films and were also processed to prepare Pt/graphene nanocomposites that were used as highly active electrocatalysts for the oxygen‐reduction reaction.     

Highly concentrated aqueous dispersions of graphene exfoliated by sodium taurodeoxycholate: dispersion behavior and potential application as a catalyst support for the oxygen-reduction reaction

A high-yielding exfoliation of graphene at high concentrations in aqueous solutions is critical for both fundamental study and future applications. Herein, we demonstrate the formation of stable aqueous dispersions of pristine graphene by using the surfactant sodium taurodeoxycholate under tip sonication at concentrations of up to 7.1 mg mL(-1). TEM showed that about 8% of the graphene flakes consisted of monolayers and 82% of the flakes consisted of less than five layers. The dispersions were stable regardless of freezing (-20 °C) or heat treatment (80 °C) for 24 h. The concentration could be significantly improved to about 12 mg mL(-1) by vacuum-evaporation of the dispersions at ambient temperature. The as-prepared graphene dispersions were readily cast into conductive films and were also processed to prepare Pt/graphene nanocomposites that were used as highly active electrocatalysts for the oxygen-reduction reaction.     

BCN: A Graphene Analogue with Remarkable Adsorptive Properties

A new analogue of graphene containing boron, carbon and nitrogen (BCN) has been obtained by the reaction of high‐surface‐area activated charcoal with a mixture of boric acid and urea at 900 °C. X‐ray photoelectron spectroscopy and electron energy‐loss spectroscopy reveal the composition to be close to BCN. The X‐ray diffraction pattern, high‐resolution electron microscopy images and Raman spectrum indicate the presence of graphite‐type layers with low sheet‐to‐sheet registry. Atomic force microscopy reveals the sample to consist of two to three layers of BCN, as in a few‐layer graphene. BCN exhibits more electrical resistivity than graphene, but weaker magnetic features. BCN exhibits a surface area of 2911 m² g^?1, which is the highest value known for a B_xC_yN_z composition. It exhibits high propensity for adsorbing CO₂ (≈100 wt %) at 195 K and a hydrogen uptake of 2.6 wt % at 77 K. A first‐principles pseudopotential‐based DFT study shows the stable structure to consist of BN₃ and NB₃ motifs. The calculations also suggest the strongest CO₂ adsorption to occur with a binding energy of 3.7 kJ mol^?1 compared with 2.0 kJ mol^?1 on graphene.     

Poly(methyl methacrylate)-Assisted Exfoliation of Graphite and Its Use in Acrylonitrile-Butadiene-Styrene Composites

One of the applications of graphene in which its scalable production is of utmost importance is the development of polymer composites. Among the techniques used to produce graphene flakes, the liquid-phase exfoliation (LPE) of graphite stands out due to its versatility and scalability. However, solvents suitable for the LPE process are generally toxic and have a high boiling point, making the processing challenging. The use of low boiling point solvents could be convenient for the processing, due to the easiness of their removal. In this study, the use of poly(methyl methacrylate) (PMMA) as a stabilizing agent is proposed for the production of graphene flakes in a low boiling point solvent, that is, acetone. The graphene dispersions produced in the mixture acetone-PMMA have higher concentration, +175 %, and contain a higher percentage of few-layer graphene flakes (<5 layers), that is, +60 %, compared to the dispersions prepared in acetone. The as-produced graphene dispersions are used to develop graphene/acrylonitrile-butadiene-styrene composites. The mechanical properties of the pristine polymer are improved, that is, +22 % in the Young's modulus, by adding 0.01 wt. % of graphene flakes. Moreover, a decrease of ≈20 % in the oxygen permeability is obtained by using 0.1 wt. % of graphene flakes filler, compared to the unloaded matrix.     

P3HT/graphene composites synthesized using In situ GRIM methods

Poly(3‐hexylthiophene)/graphene (P3HT/G) materials are synthesized using an in situ Grignard metathesis approach. The structural properties and spectroscopy of the materials are studied using NMR, FTIR, and UV–vis absorption spectroscopies, wide‐angle X‐ray scattering, atomic force microscopy and cyclic voltammetry. P3HT regioregularities ≥90% are observed in composites with approximate graphene compositions as high as 20% by weight. ¹H and ¹³C NMR spectra of liquid phase dispersions reveal signals that are not observed in pristine P3HT. The intensity of these signals correlates with the graphene content, thereby indicating that the graphene is influencing the polymerization process. Anomalous features in the FTIR spectra of P3HT/G powders are also observed. AFM images of P3HT/G films show morphological differences between P3HT on graphene compared with P3HT domains on the silicon substrates. Cyclic voltammetry reveals a monotonic decrease in the energy of the HOMO and LUMO levels of P3HT with increasing graphene loading. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 60–76     

Solid‐phase purification and extraction for the determination of trace neonicotinoid pesticides in tea infusion

An analytical protocol that includes solid‐phase purification and extraction is successfully developed for the determination of trace neonicotinoid pesticides in tea infusion. The method consists of a purification on amino‐functionalized mesoporous silica SBA‐15 followed by a solid‐phase extraction based on graphene oxide before ultra high performance liquid chromatography with tandem mass spectrometry analysis. Parameters that significantly affected the extraction of the neonicotinoids onto graphene oxide, such as the amount of adsorbent, extraction time, pH, elution solvent, etc. were optimized. The amino‐functionalized mesoporous silica SBA‐15 has been proved to be an efficient adsorbent for removal of polyphenols especially catechins from tea infusion. Graphene oxide exhibits a very rapid adsorption rate (within 10 min) and high adsorption capacities for neonicotinoids at low initial concentration (0.01–0.5 mg/L). The analysis method gave a good determination coefficient (r² > 0.99) for each pesticide and high recoveries in the range of 72.2–95.0%. Powder X‐ray diffraction, Raman spectroscopy, transmission electron microscopy, and UV‐vis spectroscopy were utilized to identify the structure and morphology of graphene oxide. The adsorption driving force of neonicotinoids on graphene oxide mainly depends on π–π electron donor–acceptor interaction and electrostatic interaction.     

Emergence of Uranium as a Distinct Metal Center for Building Intrinsic X‐ray Scintillators

The combination of high atomic number and high oxidation state in U^VI materials gives rise to both high X‐ray attenuation efficiency and intense green luminescence originating from ligand‐to‐metal charge transfer. These two features suggest that U^VI materials might act as superior X‐ray scintillators, but this postulate has remained substantially untested. Now the first observation of intense X‐ray scintillation in a uranyl–organic framework ( SCU‐9 ) that is observable by the naked eye is reported. Combining the advantage in minimizing the non‐radiative relaxation during the X‐ray excitation process over those of inorganic salts of uranium, SCU‐9 exhibits a very efficient X‐ray to green light luminescence conversion. The luminescence intensity shows an essentially linear correlation with the received X‐ray intensity, and is comparable with that of commercially available CsI:Tl. SCU‐9 possesses an improved X‐ray attenuation efficiency (E>20 keV) as well as enhanced radiation resistance and decreased hygroscopy compared to CsI:Tl.     

Controllable preparation of highly dispersed TiO2 nanoparticles for enhanced catalytic oxidation of dibenzothiophene in fuels

The aggregation of nanoparticle catalysts is one of the main problems in catalytic reactions. In this study, a series of TiO₂ nanoparticle catalysts with various dispersions were prepared and applied in the catalytic oxidation of dibenzothiophene (DBT) systems. Compositions and structures of the as‐prepared samples were analyzed by means of wide‐angle X‐ray diffraction, Raman and X‐ray photoelectron spectroscopies. The dispersions of TiO₂ nanoparticles were controlled by calcining at various temperatures and verified using transmission electron microscopy. It was found that the activities of TiO₂ nanoparticles in the catalytic oxidation of DBT were positively correlated with the dispersions. TiO₂ nanoparticles calcined at 500 °C (500‐TiO₂) showed the best catalytic activity and the oxidation of DBT reached 99.8% under mild conditions. Based on the results of GC–MS analysis, radical trapping experiments and electron spin resonance spectra, ^?O₂^? radicals were proved to be the main active species in the oxidation process, and a mechanism is proposed. Meanwhile, the recycling performance of 500‐TiO₂ was investigated, and no obvious decrease was observed after six recycles.     

Strain‐induced crystallization and mechanical properties of functionalized graphene sheet‐filled natural rubber

The effects of functionalized graphene sheets (FGSs) on the mechanical properties and strain‐induced crystallization of natural rubber (NR) are investigated. FGSs are predominantly single sheets of graphene with a lateral size of several hundreds of nanometers and a thickness of 1.5 nm. The effect of FGS and that of carbon black (CB) on the strain‐induced crystallization of NR is compared by coupled tensile tests and X‐ray diffraction experiments. Synchrotron X‐ray scattering enables simultaneous measurements of stress and crystallization of NR in real time during sample stretching. The onset of crystallization occurs at significantly lower strains for FGS‐filled NR samples compared with CB‐filled NR, even at low loadings. Neat‐NR exhibits strain‐induced crystallization around a strain of 2.25, while incorporation of 1 and 4 wt % FGS shifts the crystallization to strains of 1.25 and 0.75, respectively. In contrast, loadings of 16 wt % CB do not significantly shift the critical strain for crystallization. Two‐dimensional (2D) wide angle X‐ray scattering patterns show minor polymer chain alignment during stretching, in accord with previous results for NR. Small angle X‐ray scattering shows that FGS is aligned in the stretching direction, whereas CB does not show alignment or anisotropy. The mechanical properties of filled NR samples are investigated using cyclic tensile and dynamic mechanical measurements above and below the glass transition of NR. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Synthesis of Phosphorus‐Doped Graphene and its Wide Potential Window in Aqueous Supercapacitors

Phosphorus‐doped (P‐doped) graphene with the P doping level of 1.30 at % was synthesized by annealing the mixture of graphene and phosphoric acid. The presence of P was confirmed by elemental mapping and X‐ray photoelectron spectroscopy, while the morphology of P‐doped graphene was revealed by using scanning electron microscopy and transmission electron microscopy. To investigate the effect of P doping, the electrochemical properties of P‐doped graphene were tested as a supercapacitor electrode in an aqueous electrolyte of 1 M H₂SO₄. The results showed that doping of P in graphene exhibited significant improvement in terms of specific capacitance and cycling stability, compared with undoped graphene electrode. More interestingly, the P‐doped graphene electrode can survive at a wide voltage window of 1.7 V with only 3 % performance degradation after 5000 cycles at a current density of 5 A g^?1, providing a high energy density of 11.64 Wh kg^?1 and a high power density of 831 W kg^?1.     

Synthesis,characterization and photocatalytic application of TiO2/magnetic graphene for efficient photodegradation of crystal violet

A magnetized nano‐photocatalyst based on TiO₂/magnetic graphene was developed for efficient photodegradation of crystal violet (CV). Scanning electron microscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy and elemental mapping were used to characterize the prepared magnetic nano‐photocatalyst. The photocatalytic activity of the synthesized magnetic nano‐photocatalyst was evaluated using the decomposition of CV as a model organic pollutant under UV light irradiation. The obtained results showed that TiO₂/magnetic graphene exhibited much higher photocatalytic performance than bare TiO₂. Incorporation of graphene enhanced the activity of the prepared magnetic nano‐photocatalyst. TiO₂/magnetic graphene can be easily separated from an aqueous solution by applying an external magnetic field. Effects of pH, magnetized nano‐photocatalyst dosage, UV light irradiation time, H₂O₂ amount and initial concentration of dye on the photodegradation efficiency were evaluated and optimized. Efficient photodegradation (>98%) of the selected dye under optimized conditions using the synthesized nano‐photocatalyst under UV light irradiation was achieved in 25 min. The prepared magnetic nano‐photocatalyst can be used in a wide pH range (4–10) for degradation of CV. The effects of scavengers, namely methanol (OH^? scavenger), p‐benzoquinone (O₂^?? scavenger) and disodium ethylenediaminetetraacetate (hole scavenger), on CV photodegradation were investigated.     

Transition Metal (Mn,Fe, Co,Ni)‐Doped Graphene Hybrids for Electrocatalysis

The development of electrocatalysts is crucial for renewable energy applications. Metal‐doped graphene hybrid materials have been explored for this purpose, however, with much focus on noble metals, which are limited by their low availability and high costs. Transition metals may serve as promising alternatives. Here, transition metal‐doped graphene hybrids were synthesized by a simple and scalable method. Metal‐doped graphite oxide precursors were thermally exfoliated in either hydrogen or nitrogen atmosphere; by changing exfoliation atmospheres from inert to reductive, we produced materials with different degrees of oxidation. Effects of the presence of metal nanoparticles and exfoliation atmosphere on the morphology and electrocatalytic activity of the hybrid materials were investigated using electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray photoelectron spectroscopy, and cyclic voltammetry. Doping of graphene with transition metal nanoparticles of the 4th period significantly influenced the electrocatalysis of compounds important in energy production and storage applications, with hybrid materials exfoliated in nitrogen atmosphere displaying superior performance over those exfoliated in hydrogen atmosphere. Moreover, nickel‐doped graphene hybrids displayed outstanding electrocatalytic activities towards reduction of O₂ when compared to bare graphenes. These findings may be exploited in the research field of renewable energy.     

Dispersion of Reduced Graphene Oxide in Multiple Solvents with an Imidazolium‐Modified Hexa‐peri‐hexabenzocoronene

An imidazolium‐modified hexa‐peri‐hexabenzocoronene derivative (HBC‐C₁₁‐MIM[Cl^?]) was designed and synthesized as a stabilizer to fabricate reduced graphene oxide (RGO). The resulting RGO/HBC‐C₁₁‐MIM[Cl^?] hybrid shows excellent dispersivity (5.0 mg mL^?1) and stability in water. RGO/HBC‐C₁₁‐MIM[Cl^?] was comprehensively characterized by using atomic force microscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy, thermogravimetric analysis, and Raman spectroscopy, thus revealing that one HBC‐C₁₁‐MIM[Cl^?] group can stabilize about 178 carbon atoms on the graphene sheets. The obtained hybrid film exhibits a high conductivity of 286 S m^?1. Furthermore, the HBC‐C₁₁‐MIM[Cl^?]‐modified RGO sheets can be readily dispersed in polar organic solvents upon exchange of the hydrophilic Cl^? ions for hydrophobic bis(trifluoromethylsulfonyl) amide (NTf₂^?) ions.     

Facile Mechanochemical Synthesis of Nano SnO2/Graphene Composite from Coarse Metallic Sn and Graphite Oxide: An Outstanding Anode Material for Lithium‐Ion Batteries

A facile method for the large‐scale synthesis of SnO₂ nanocrystal/graphene composites by using coarse metallic Sn particles and cheap graphite oxide (GO) as raw materials is demonstrated. This method uses simple ball milling to realize a mechanochemical reaction between Sn particles and GO. After the reaction, the initial coarse Sn particles with sizes of 3–30 μm are converted to SnO₂ nanocrystals (approximately 4 nm) while GO is reduced to graphene. Composite with different grinding times (1 h 20 min, 2 h 20 min or 8 h 20 min, abbreviated to 1, 2 or 8 h below) and raw material ratios (Sn:GO, 1:2, 1:1, 2:1, w/w) are investigated by X‐ray diffraction, X‐ray photoelectron spectroscopy, field‐emission scanning electron microscopy and transmission electron microscopy. The as‐prepared SnO₂/graphene composite with a grinding time of 8 h and raw material ratio of 1:1 forms micrometer‐sized architected chips composed of composite sheets, and demonstrates a high tap density of 1.53 g cm^?3. By using such composites as anode material for LIBs, a high specific capacity of 891 mA h g^?1 is achieved even after 50 cycles at 100 mA g^?1.     

Graphene Oxide/Polyacrylamide/Aluminum Ion Cross‐Linked Carboxymethyl Hemicellulose Nanocomposite Hydrogels with Very Tough and Elastic Properties

Development of high‐strength hydrogels has recently attracted ever‐increasing attention. In this work, a new design strategy has been proposed to prepare graphene oxide (GO)/polyacrylamide (PAM)/aluminum ion (Al³⁺)‐cross‐linked carboxymethyl hemicellulose (Al‐CMH) nanocomposite hydrogels with very tough and elastic properties. GO/PAM/Al‐CMH hydrogels were synthesized by introducing graphene oxide (GO) into PAM/CMH hydrogel, followed by ionic cross‐linking of Al³⁺. The nanocomposite hydrogels were characterized by means of FTIR, X‐ray diffraction (XRD), and scanning electron microscopy/energy‐dispersive X‐ray analysis (SEM‐EDX) along with their swelling and mechanical properties. The maximum compressive strength and the Young's modulus of GO_3.5/PAM/Al‐CMH_0.45 hydrogel achieved values of up to 1.12 and 13.27 MPa, increased by approximately 6488 and 18330 % relative to the PAM hydrogel (0.017 and 0.072 MPa). The as‐prepared GO/PAM/Al‐CMH nanocomposite hydrogels possess high strength and great elasticity giving them potential in bioengineering and drug‐delivery system applications.     

Development and Investigation of a NASICON‐Type High‐Voltage Cathode Material for High‐Power Sodium‐Ion Batteries

Herein, we introduce a 4.0 V class high‐voltage cathode material with a newly recognized sodium superionic conductor (NASICON)‐type structure with cubic symmetry (space group P2₁3), Na₃V(PO₃)₃N. We synthesize an N‐doped graphene oxide‐wrapped Na₃V(PO₃)₃N composite with a uniform carbon coating layer, which shows excellent rate performance and outstanding cycling stability. Its air/water stability and all‐climate performance were carefully investigated. A near‐zero volume change (ca. 0.40 %) was observed for the first time based on in situ synchrotron X‐ray diffraction, and the in situ X‐ray absorption spectra revealed the V^3.2+/V^4.2+ redox reaction with high reversibility. Its 3D sodium diffusion pathways were demonstrated with distinctive low energy barriers. Our results indicate that this high‐voltage NASICON‐type Na₃V(PO₃)₃N composite is a competitive cathode material for sodium‐ion batteries and will receive more attention and studies in the future.     

Fullerene–Ionic‐Liquid Conjugates: A New Class of Hybrid Materials with Unprecedented Properties

A modular approach has been followed for the synthesis of a series of fullerene–ionic‐liquid (IL) hybrids in which the number of IL moieties (two or twelve), anion, and cation have been varied. The combination of C₆₀ and IL give rise to new unique properties in the conjugates such as solubility in water, which was higher than 800 mg mL^?1 in several cases. In addition, one of the C₆₀–IL hybrids has been employed for the immobilization of palladium nanoparticles through ion exchange followed by reduction with sodium borohydride. Surprisingly, during the reduction several carbon nanostructures were formed that comprised nano‐onions and nanocages with few‐layer graphene sidewalls, which have been characterized by means of thermogravimetric analysis (TGA), X‐ray photoelectron spectroscopy (XPS), X‐ray diffraction (XRD), scanning electron microscopy/energy‐dispersive X‐ray analysis (SEM‐EDAX), and high‐resolution transmission electron microscopy (HRTEM). Finally, the material thus obtained was successfully applied as catalyst in Suzuki and Mizoroki–Heck reactions in a concentration of just 0.2 mol %. In the former process it was recyclable for five runs with no loss in activity.     

Preparation of ferric nitrate–graphene nanocomposite and its adsorption of arsenic(V) from simulated arsenic‐containing wastewater

Ferric nitrate–graphene (FG) nanocomposites synthesized via the equivalent‐volume impregnation method were used for the removal of As(V) species from simulated arsenic‐containing wastewater. Effects of various factors were assessed, such as the reaction temperature, solution pH, adsorbent dosage, and reaction time. The results indicated that the As(V) removal efficiency was as high as 99%, and the concentration of arsenic‐containing wastewater after FG treatment was as low as 9.4 μg L^–1 as a result of the optimal absorption capacity and maximum specific surface area (171.766 m²/g) of this material. The equilibrium adsorption capacity of FG for As(V) was achieved in approximately 20 min, and the maximum adsorption capacity was calculated to be 112.4 mg g^–1 by Langmuir adsorption isotherm, which was higher than that of other adsorbents such as manganese‐incorporated iron(III) oxide–graphene (14.42 mg g^–1). Moreover, the removal efficiency of As(V) can be maintained above 95% under acidic and alkaline conditions. Brunauer–Emmett–Teller analysis showed that the modified FG pore structure was regular. Based on the characterizations by X‐ray diffraction, X‐ray photoelectron spectroscopy, and Fourier transform infrared, the products on the surface of the used FG were Fe(OH)₃, FeAsO₄, and other compounds, and As(V) was mainly removed by the formation of insoluble compounds and coprecipitation.     

Synthesis of V5+‐doped Ag/AgCl photocatalysts with enhanced visible light photocatalytic activity

V⁵⁺‐doped Ag/AgCl photocatalysts were prepared via the ion exchange method. The catalysts were characterized using X‐ray diffractometry, transmission electron microscopy, and energy‐dispersive X‐ray, X‐ray photoelectron, Fourier transform infrared and ultraviolet–visible spectroscopies. The V⁵⁺‐doped Ag/AgCl photocatalysts show much higher photocatalytic activities than Ag/AgCl under visible light irradiation for methyl orange (MO) decomposition. Especially, the 2.0 wt% V⁵⁺‐doped Ag/AgCl photocatalyst shows the highest photocatalytic activity and also high stability after five cycles. The MO degradation rate during each cycle is almost maintained at 97%. Electron spin resonance spectroscopy and radical trapping experiments reveal that holes play an important role in the photocatalytic process.     

Facile Chan‐Lam coupling using ferrocene tethered N‐heterocyclic carbene‐copper complex anchored on graphene

Ferrocene tethered N‐heterocyclic carbene‐copper complex anchored on graphene ([GrFemImi]NHC@Cu complex) has been synthesized by covalent grafting of ferrocenyl ionic liquid in the matrix of graphene followed by metallation with copper (I) iodide. The [GrFemImi]NHC@Cu complex has been characterized by fourier transform infrared (FT‐IR), fourier transform Raman (FT‐Raman), CP‐MAS ¹³C NMR spectroscopy, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), energy dispersive X‐ray (EDX) analysis, X‐ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET) surface area analysis and X‐ray diffractometer (XRD) analysis. This novel complex served as a robust heterogeneous catalyst for the synthesis of bioactive N‐aryl sulfonamides from variety of aryl boronic acids and sulfonyl azides in ethanol by Chan‐Lam coupling. Recyclability experiments were executed successfully for six consecutive runs.