Green Synthesis of Red‐Emitting Carbon Nanodots as a Novel “Turn‐on” Nanothermometer in Living Cells

Temperature measurements in biology and medical diagnostics, along with sensitive temperature probing of living cells, is of great importance; however, it still faces significant challenges. Herein, a novel “turn‐on” carbon‐dot‐based fluorescent nanothermometry device for spatially resolved temperature measurements in living cells is presented. The carbon nanodots (CNDs) are prepared by a green microwave‐assisted method and exhibit red fluorescence (λ_em=615 nm) with high quantum yields (15 %). Then, an on–off fluorescent probe is prepared for detecting glutathione (GSH) based on aggregation‐induced fluorescence quenching. Interestingly, the quenched fluorescence could be recovered by increasing temperature and the CNDs–GSH mixture could behave as an off–on fluorescent probe for temperature. Thus, red‐emitting CNDs can be utilized for “turn‐on” fluorescent nanothermometry through the fluorescence quenching and recovery processes, respectively. We employ MC3T3‐E1 cells as an example model to demonstrate the red‐emitting CNDs can function as “non‐contact” tools for the accurate measurement of temperature and its gradient inside a living cell.     

Side chain impacts on pH‐ and thermo‐responsiveness of tertiary amine functionalized polypeptides

The systemic investigation of the structural impacts of side chains on the pH‐ and thermo‐responsiveness of tertiary amine functionalized poly(l ‐glutamate)s (TA‐PGs) was carried out. The TA‐PGs polymers were effectively synthesized by Cu(I)‐catalyzed azide‐alkyne cycloaddition click reaction of azido tertiary amines with poly(γ‐propargyl‐l ‐glutamate) (PPLG). Turbimetric measurements were performed to characterize the pH‐ and temperature‐induced phase transition of TA‐PGs in aqueous solution, which suggested a structural dependence of the properties on the N‐substituted groups and the “linkers” between 1,2,3‐triazole ring and the tertiary amine groups in the side chains. In detail, the pH responsive properties of TA‐PGs were basically determined by the hydrophobicity of the N‐substituted groups in the side chains and the pH transition point (pH_t) decreased as the increasing hydrophobicity of the N‐substituted groups, while the temperature‐responsiveness of TA‐PGs were affected by either the N‐substituted groups or the “linkers.” TA‐PGs with a moderate N‐substituted amine group (e.g., DEA, PR, and PD) or a branched “linker” (e.g., iso‐propylene and 2‐methylpropylene group) were more likely to express the LCST‐type phase transition tuned by pH variation. These structure–property relationships revealed in this study would help to develop the applications of TA‐PGs in smart drug delivery systems. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 671–679     

Modulating catalytic activity of polymer‐based cuAAC “click” reactions

The copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction is used to synthesize complex polymer architectures. In this work, we demonstrate the control of this reaction at 25 °C between polystyrene (PSTY) chains through modulating the catalytic activity by varying the combinations of copper source (i.e., Cu(I)Br or copper wire), ligand (PMDETA and/or triazole ligand), and solvent (toluene or DMF). The fastest rate of CuAAC was found using Cu(I)Br/PMDETA ligand in toluene, reaching near full conversion after 15 min at 25 °C. For the same catalysts system, DMF also gave fast rates of “click” (95% conversion in 25 min). Cu(0) wire in toluene gave a conversion of 98% after 600 min, a much higher rate than that observed for the same catalyst system used in DMF. When the PSTY had a chemically bound triazole ring close to the site of reaction, the rate of CuAAC in toluene increased significantly, 97% in 180 min at 25 °C, in agreement with our previously published results. This suggests that rapid rates can be obtained using copper wire and will have direct applications to the synthesis of compound where air, removal of copper, and reuse of the copper catalyst are required. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Prepolymerization and postpolymerization functionalization approaches to fluorescent conjugated carbazole‐based glycopolymers via “click chemistry”

Facile prepolymerization and postpolymerization functionalization approaches to prepare well‐defined fluorescent conjugated glycopolymers through Cu(I)‐catalyzed azide/alkyne “Click” ligation were explored. Two well‐defined carbazole‐based fluorescent conjugated glycopolymers were readily synthesized based on these strategies and characterized by ¹H NMR, ¹³C NMR, IR spectra, and UV‐vis spectra. The “Click” ligation offers a very effective conjugation method to covalently attach carbohydrate residues to fluorescent conjugated polymers. In addition, the studies of carbohydrate–lectin interactions were performed by titration of concanavalin A (Con A) to D ‐glucose‐bearing poly(anthracene‐alt‐carbazole) copolymer P‐2 resulting in significant fluorescence quenching of the polymer due to carbohydrate–lectin interactions. When peanut agglutinin (PNA) was added, no distinct change in the fluorescent properties of P‐2 was observed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2948–2957, 2009     

Tetraphenylethylene‐based Glycoconjugate as a Fluorescence “Turn‐On” Sensor for Cholera Toxin

Tetraphenylethylene (TPE)‐based glycoconjugates were easily synthesized by copper(I)‐catalyzed “click reactions” between propargyl‐attached TPE and azido‐functionalized sugars. The TPE compound bearing lactosyl moieties ( Lac‐TPE ) was found to be a fluorescence “turn‐on” sensor for cholera toxin by virtue of aggregation‐induced emission characteristics of the TPE motif owing to the specific interaction of lactose with the cholera toxin B subunit, whilst a cellobiose‐functionalized TPE derivative did not show any response to the toxin. Therefore, Lac‐TPE shows promising applications in the detection of cholera toxin, as well as in the investigation of carbohydrate–protein interaction.     

Preparation of molecularly imprinted polymers via atom transfer radical “bulk” polymerization

The first application of atom transfer radical “bulk” polymerization (ATRBP) in molecular imprinting is described, which provides molecularly imprinted polymers (MIPs) with obvious imprinting effects towards the template, very fast binding kinetics, and an appreciable selectivity over structurally related compounds. In comparison with the MIP prepared via the normally used traditional “bulk” free radical polymerization (BFRP), the MIPs obtained via ATRBP showed somewhat lower binding capacities and apparent maximum numbers N_max for high‐affinity sites as well as quite similar binding association constants K_a for high‐affinity sites and high‐affinity site densities, in contrast with the previous reports (e.g., nitroxide/iniferter‐mediated “bulk” polymerization provided MIPs with improved properties). This is tentatively ascribed to the occurrence of rather fast gelation process in ATRBP, which greatly restricted the mobility of the chemical species, leading to a heavily interrupted equilibrium between dormant species and active radicals and heterogeneous polymer networks. In addition, the general applicability of ATRBP was also confirmed by preparing MIPs for different templates. This work clearly demonstrates that applying controlled radical polymerizations (CRPs) in molecular imprinting not always benefits the binding properties of the resultant MIPs, which is of significant importance for the rational use of CRPs in generating MIPs with improved properties. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 532–541, 2010     

Integration of the 1,2,3‐Triazole “Click” Motif as a Potent Signalling Element in Metal Ion Responsive Fluorescent Probes

In a systematic approach we synthesized a new series of fluorescent probes incorporating donor–acceptor (D‐A) substituted 1,2,3‐triazoles as conjugative π‐linkers between the alkali metal ion receptor N‐phenylaza‐[18]crown‐6 and different fluorophoric groups with different electron‐acceptor properties (4‐naphthalimide, meso‐phenyl‐BODIPY and 9‐anthracene) and investigated their performance in organic and aqueous environments (physiological conditions). In the charge‐transfer (CT) type probes 1 , 2 and 7 , the fluorescence is almost completely quenched by intramolecular CT (ICT) processes involving charge‐separated states. In the presence of Na⁺ and K⁺ ICT is interrupted, which resulted in a lighting‐up of the fluorescence in acetonitrile. Among the investigated fluoroionophores, compound 7 , which contains a 9‐anthracenyl moiety as the electron‐accepting fluorophore, is the only probe which retains light‐up features in water and works as a highly K⁺/Na⁺‐selective probe under simulated physiological conditions. Virtually decoupled BODIPY‐based 6 and photoinduced electron transfer (PET) type probes 3 – 5 , where the 10‐substituted anthracen‐9‐yl fluorophores are connected to the 1,2,3‐triazole through a methylene spacer, show strong ion‐induced fluorescence enhancement in acetonitrile, but not under physiological conditions. Electrochemical studies and theoretical calculations were used to assess and support the underlying mechanisms for the new ICT and PET 1,2,3‐triazole fluoroionophores.     

Synthetic Control of the Excited‐State Dynamics and Circularly Polarized Luminescence of Fluorescent “Push–Pull” Tetrathia[9]helicenes

A series of fluorescent “push‐pull” tetrathia[9]helicenes based on quinoxaline (acceptor) fused with tetrathia[9]helicene (donor) derivatives was synthesized for control of the excited‐state dynamics and circularly polarized luminescence (CPL) properties. In this work, introduction of a quinoxaline onto the tetrathia[9]helicene skeleton induced the “push–pull” character, which was enhanced by further introduction of an electron‐releasing Me₂N group or an electron‐withdrawing NC group onto the quinoxaline unit (denoted as Me₂N‐QTTH and NC‐QTTH, respectively). These trends were successfully discussed in terms of by electrochemical measurements and density functional theory (DFT) calculations. As a consequence, significant enhancements in the fluorescence quantum yields (Φ_FL) were achieved. In particular, the maximum Φ_FL of Me₂N‐QTTH was 0.43 in benzene (NC‐QTTH: Φ_FL=0.30), which is more than 20 times larger than that of a pristine tetrathia[9]helicene (denoted as TTH; Φ_FL=0.02). These enhancements were also explained by kinetic discussion of the excited‐state dynamics such as fluorescence and intersystem crossing (ISC) pathways. Such significant enhancements of the Φ_FL values thus enabled us to show the excellent CPL properties. The value of anisotropy factor g_CPL (normalized difference in emission of right‐handed and left‐handed circularly polarized light) was estimated to be 3.0×10^?3 for NC‐QTTH.     

Cyclometalated Mono‐ and Dinuclear IrIII Complexes with “Click”‐Derived Triazoles and Mesoionic Carbenes

Orthometalation at Ir^III centers is usually facile, and such orthometalated complexes often display intriguing electronic and catalytic properties. By using a central phenyl ring as C?H activation sites, we present here mono‐ and dinuclear Ir^III complexes with “click”‐derived 1,2,3‐triazole and 1,2,3‐triazol‐5‐ylidene ligands, in which the wingtip phenyl groups in the aforementioned ligands are additionally orthometalated and bind as carbanionic donors to the Ir^III centers. Structural characterization of the complexes reveal a piano stool‐type of coordination around the metal centers with the “click”‐derived ligands bound either with C^N or C^C donor sets to the Ir^III centers. Furthermore, whereas bond localization is observed within the 1,2,3‐triazole ligands, a more delocalized situation is found in their 1,2,3‐triazol‐5‐ylidene counterparts. All complexes were subjected to catalytic tests for the transfer hydrogenation of benzaldehyde and acetophenone. The dinuclear complexes turned out to be more active than their mononuclear counterparts. We present here the first examples of stable, isomer‐pure, dinuclear cyclometalated Ir^III complexes with poly‐mesoionic‐carbene ligands.     

Masked Rhodamine Dyes of Five Principal Colors Revealed by Photolysis of a 2‐Diazo‐1‐Indanone Caging Group: Synthesis,Photophysics, and Light Microscopy Applications

Caged rhodamine dyes (Rhodamines NN) of five basic colors were synthesized and used as “hidden” markers in subdiffractional and conventional light microscopy. These masked fluorophores with a 2‐diazo‐1‐indanone group can be irreversibly photoactivated, either by irradiation with UV‐ or violet light (one‐photon process), or by exposure to intense red light (λ～750 nm; two‐photon mode). All dyes possess a very small 2‐diazoketone caging group incorporated into the 2‐diazo‐1‐indanone residue with a quaternary carbon atom (C‐3) and a spiro‐9H‐xanthene fragment. Initially they are non‐colored (pale yellow), non‐fluorescent, and absorb at λ=330–350 nm (molar extinction coefficient (ε)≈10⁴ M^?1 cm^?1) with a band edge that extends to about λ=440 nm. The absorption and emission bands of the uncaged derivatives are tunable over a wide range (λ=511–633 and 525–653 nm, respectively). The unmasked dyes are highly colored and fluorescent (ε= 3–8×10⁴ M^?1 cm^?1 and fluorescence quantum yields (?)=40–85 % in the unbound state and in methanol). By stepwise and orthogonal protection of carboxylic and sulfonic acid groups a highly water‐soluble caged red‐emitting dye with two sulfonic acid residues was prepared. Rhodamines NN were decorated with amino‐reactive N‐hydroxysuccinimidyl ester groups, applied in aqueous buffers, easily conjugated with proteins, and readily photoactivated (uncaged) with λ=375–420 nm light or intense red light (λ=775 nm). Protein conjugates with optimal degrees of labeling (3–6) were prepared and uncaged with λ=405 nm light in aqueous buffer solutions (?=20–38 %). The photochemical cleavage of the masking group generates only molecular nitrogen. Some 10–40 % of the non‐fluorescent (dark) byproducts are also formed. However, they have low absorbance and do not quench the fluorescence of the uncaged dyes. Photoactivation of the individual molecules of Rhodamines NN (e.g., due to reversible or irreversible transition to a “dark” non‐emitting state or photobleaching) provides multicolor images with subdiffractional optical resolution. The applicability of these novel caged fluorophores in super‐resolution optical microscopy is exemplified.     

Polyoxometalate‐Engineered Building Blocks with Gold Cores for the Self‐Assembly of Responsive Water‐Soluble Nanostructures

The controlled assembly of gold nanoparticles (AuNPs) with the size of quantum dots into predictable structures is extremely challenging as it requires the quantitatively and topologically precise placement of anisotropic domains on their small, approximately spherical surfaces. We herein address this problem by using polyoxometalate leaving groups to transform 2 nm diameter gold cores into reactive building blocks with hydrophilic and hydrophobic surface domains whose relative sizes can be precisely tuned to give dimers, clusters, and larger micelle‐like organizations. Using cryo‐TEM imaging and ¹H DOSY NMR spectroscopy, we then provide an unprecedented “solution‐state” picture of how the micelle‐like structures respond to hydrophobic guests by encapsulating them within 250 nm diameter vesicles whose walls are comprised of amphiphilic AuNP membranes. These findings provide a versatile new option for transforming very small AuNPs into precisely tailored building blocks for the rational design of functional water‐soluble assemblies.     

New 3‐(Heteroaryl)‐2‐iminocoumarin‐based Borate Complexes: Synthesis,Photophysical Properties,and Rational Functionalization for Biosensing/Biolabeling Applications

Members of a series of boron difluoride complexes with 3‐(heteroaryl)‐2‐iminocoumarin ligands bearing both a phenolic hydroxyl group (acting as a fluorogenic center) and an N‐aryl substituent (acting as a stabilizing moiety) have been synthesized in good yields by applying a straightforward two‐step method. These novel fluorogenic dyes belong to the family of “Boricos” (D. Frath et al., Chem. Commun.­ 2013 , 49, 4908–4910) and are the first examples of phenol‐based fluorophores of which the photophysical properties in the green‐yellow spectral range are dramatically improved by N,N‐chelation of a boron atom. Modulation of their fluorescence properties through reversible chemical modification of their phenol moieties has been demonstrated by the preparation of the corresponding 2,4‐dinitrophenyl (DNP) ethers, which led to a dramatic “OFF‐ON” fluorescence response upon reaction with thiols. Additionally, to expand the scope of these “7‐hydroxy‐Borico” derivatives, particularly in biolabeling, amine or carboxylic acid functionalities amenable to (bio)conjugation have been introduced within their scaffold. Their utility has been demonstrated in the preparation of fluorescent bovine serum albumin (BSA) conjugates and “Borico”‐DOTA‐like scaffolds in an effort to design novel monomolecular multimodal fluorescence‐ radioisotope imaging agents.     

Folding and Aggregation of Cationic Oligo(aryl‐triazole)s in Aqueous Solution

Cationic aryl triazole oligomers have been synthesized through “click chemistry”. The results show that cationic aryl triazole oligomers adopt a helical conformation in water or in a mixture of water and methanol, but prevail as a random‐coiled conformation in methanol. Importantly, circular dichroism spectroscopy and dynamic light scattering experiments revealed that cationic oligomers aggregated intermolecularly to form higher order architectures with a helical sense opposite to that of the individual helix, which eventually led to the formation of aggregates with sizes in the range 100–500 nm. The aggregation of cationic oligomers was governed by the concentration and polarity of the environment. More interestingly, cationic foldamers were able to recognize chloride and fluoride anions in aqueous solution. The recognition consequently destabilized intermolecular aggregation.     

“Surface-photografting”: new applications to synthetic fibers

“Surface-photografting” with UV-irradiation of polypropylene (PP) fiber and film and high-strength polyethylene (HSPE) yarn has been made with acrylic acid (AA) and acrylamide (AM) as monomers and benzophenone (BP), 4-chlorobenzophenone (4-BCP) and hydroxylcyclohexylacetophenone (HHA) as photoinitiators using a new continuous method. The grafting reaction occurs in a thin liquid layer on the fiber or film substrate, which is presoaked in a solution containing initiator and monomer. After irradiation with a highpressure mercury lamp, HPM 15 (2 kW) from Philips, for 5–20 sec at about 50°C the fiber and film surface is completely covered with a 2–8 nm thick layer of grafted polymer, analyzed by electron spectroscopy for chemical analysis. The grafting efficiency is 70–80%, i.e. only 20–30% of the polymer is homopolymer which can be removed by extraction. The grafted layers are so thin that they cannot be analyzed as weight increase (<0.1% of fiber weight). Absolute values for the amount of grafted AA polymer is analyzed by microtitration of the COOH groups at the fiber surface. The results agree well with the relative ESCA values. Grafting of commercial PP yarn with AA increases the adsorption of Crystal Violet dye with a factor of about 6. Grafting the same yarn with AM increases the adhesion to epoxy resin by a factor of 3–4 without affecting the mechanical properties of the fiber more than a few percent. For comparison, strips of blown PP film (5 mm wide) are modified by “surface-photografting” with AM. With increasing grafting, the contact angle for drops of distilled water decreases from 90° to 20°, indicating extensive wetting. The adhesion to epoxy resin increases from about 0.35 to 1.7 N/mm², i.e. with a factor of about 5 when the film surface is completely covered. Other comparisons are made with grafting of commercial HSPE yarn. Grafting with AA increases the adsorption of Crystal Violet dye by a factor of about 6. Grafting with AM increases the adhesion to epoxy resin from 0.25 to 1.3 N/nm², i.e. with a factor of 5. The bulk mechanical properties of the HSPE filaments are not affected by the grafting measured as tensile strength 2.7±0.1 GPa, elongation at break 4.8±0.3%, and Young's modulus 55±3 GPa, both before and after “surface-photografting”.     

A “Schizophotonic” All‐In‐One Nanoparticle Coating for Multiplexed SE(R)RS Biomedical Imaging

SERS nanoprobes for in vivo biomedical applications require high quantum yield, long circulation times, and maximum colloidal stability. Traditional synthetic routes require high metal–dye affinities and are challenged by unfavorable electrostatic interactions and limited scalability. We report the synthesis of a new near‐IR active poly(N‐(2‐hydroxypropyl) methacrylamide) (pHPMA). The integration of various SERS reporters into a biocompatible polymeric surface coating allows for controlled dye incorporation, high colloidal stability, and optimized in vivo circulation times. This technique allows the synthesis of very small (<20 nm) SERS probes, which is crucial for the design of excretable and thus highly translatable imaging agents. Depending on their size, the “schizophotonic” nanoparticles can emit both SERS and fluorescence. We demonstrate the capability of this all‐in‐one gold surface coating and SERS reporter for multiplexed lymph‐node imaging.     

Orthogonal Synthesis of Xeno Nucleic Acids

Sequence‐defined peptide triazole nucleic acids (PTzNA) were synthesized by means of a solid‐phase orthogonal “AB+CD” iterative strategy. In this approach, AB and CD building blocks containing carboxylic acid (A), azide (B), alkyne (C), and primary amine (D) functions are assembled together by successive copper‐catalyzed azide–alkyne cycloaddition (CuAAC) and acid–amine coupling steps. Different PTzNA genetic sequences were prepared using a library of eight building blocks (i.e., four AB and four CD building blocks).     

Pyrene functional poly(vinyl alcohol) by “click” chemistry

Side‐chain pyrene functional poly(vinyl alcohol) (PVA) was synthesized by using “click chemistry” strategy. First, partial tosylation of PVA with p‐toluene sulfonyl chloride were performed. The resulting PVA‐Ts polymer was then quantitatively converted into poly(vinyl alcohol)‐azide (PVA‐N₃) in the presence of NaN₃/DMF at 60 °C. Propargyl pyrene was prepared independently as a photoactive click component. Finally, azido functionalized PVA was coupled to propargyl pyrene with high efficiency by click chemistry. Incorporation of pyrene functionality in the resulting polymer was confirmed by spectral analysis. It is also shown that pyrene functionalized PVA (PVA‐Py) exhibited characteristic fluorescence properties and improved solubility in highly polar solvents such as water, DMSO, and DMF as well as less polar solvent such as THF compared with pristine PVA. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1317–1326, 2009     

Dynamic mechanical thermal and infrared analyses of polyacrylonitrile “electrografted” onto a metal

Polyacrylonitrile (PAN) films have been “grafted” onto copper electrodes by cathodic polarization and analyzed by infrared spectroscopy and dynamic mechanical thermal analysis (DMTA). The dynamic mechanical response shows two or three transitions depending on the film thickness and the potential deposition. The viscoelastic properties of “ungrafted” PAN films, e.g., solvent cast films of commercially available PAN, are deeply different from those of “electrografted” films. The experimental data support that “ungrafted” chains are paracrystalline in contrast to the “grafted” ones which are essentially amorphous. Moreover, the irreversible transformation of the “grafted” PAN chains observed beyond 225°C is confirmed by Fourier transform infrared (FTIR) analysis and ascribed to an intramolecular cyclization of PAN into polyimine. This reaction occurs rapidly and at a comparatively low temperature with respect to “ungrafted” PAN, which suggests that the “grafted” chain configuration might be predominantly isotactic. The isotacticity and the amorphous structure appear to decrease as the thickness of the PAN film is increased. Literature data and the herein reported observations would suggest a dependence of the amorphous structure of PAN on the chain isotacticity. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 543–553, 1998     

The Effect of Ligand Denticity in Size‐Selective Synthesis of Calix[n]arene‐Stabilized Gold Nanoparticles: A Multitechnique Approach

A series of gold nanoparticles (AuNPs) stabilized by monodentate, bidentate, and tridentate thiolate calix[n]arene ligands 1 – 3 was prepared by using the Brust–Schiffrin two‐phase direct synthesis and characterized with NMR spectroscopy, elemental analysis, transmission electron microscopy (TEM), and X‐ray photoelectron spectroscopy (XPS). The experimental data show that the particular multidentate structure of calix[n]arene derivatives 2 and 3 introduces a control element in the preparation of the gold nanoparticles that allows, in the particular experimental conditions here reported, to obtain very small (≈1 nm) AuNPs. These are the first experimental findings that identify a role of ligand “denticity” in the determination of the nuclearity of nanoparticles.     

The polymerization of acrylonitrile in miniemulsions: “Crumpled latex particles” or polymer nanocrystals

Stable dispersions of polyacrylonitrile (PAN) nanoparticles in the size range between 100 nm < d < 180 nm were made by polymerization in miniemulsion and characterized by dynamic light scattering, transmission electron microscopy (TEM), and wide angle X‐ray scattering (WAXS). Due to the insolubility of the polymer in its monomer, such particles are not accessible by classical emulsion polymerization. The pure PAN particles are composed of ca. 10 nm large polymer nanocrystals, i. e., the formed polymer precipitates and crystallizes direct after formation. As a consequence, the final latexes do not adopt spherical shape, but show a well defined, narrowly distributed boulder‐like phenotype which is called “crumpled latexes”. Copolymerization with styrene results in a continuous transition between the crumpled and a smooth spherical morphology, which is again related to a decreased degree of crystallinity.