Metal Complexes of Click‐Derived Triazoles and Mesoionic Carbenes: Electron Transfer,Photochemistry, Magnetic Bistability,and Catalysis

Even though the existence of 1,2,3‐triazoles has been known for more than a century, the recent discovery of a copper(I) catalyzed version of this reaction has attributed unprecedented importance to these compounds. Coordination and organometallic chemists have benefited from this modular synthetic route, and have accessed ligands based on both the triazoles as well as the triazolylidenes. The wide variation of steric and electronic properties that can be achieved for this ligand class has made them useful for generating metal complexes with various applications. Examples include, among others: magnetically switchable molecules, electro‐ and photo‐active molecules, molecules for light‐emitting electrochemical cells, dyes for dye‐sensitized solar cells and a host of homogeneous catalytic processes. In this contribution, we present recent developments in this field with examples of some selected ligands. The focus is on systems developed in our group over the past few years.     

Cyclometalated Iridium(III) Complexes with Deoxyribose Substituents

Fundamental study of enzymatic nucleoside transport suffers for lack of optical probes that can be tracked noninvasively. Nucleoside transporters are integral membrane glycoproteins that mediate the salvage of nucleosides and their passage across cell membranes. The substrate recognition site is the deoxyribose sugar, often with little distinction among nucleobases. Reported here are nucleoside analogues in which emissive, cyclometalated iridium(III) complexes are “clicked” to C‐1 of deoxyribose in place of canonical nucleobases. The resulting complexes show visible luminescence at room temperature and 77 K with microsecond‐length triplet lifetimes. A representative complex is crystallographically characterized. Transport and luminescence are demonstrated in cultured human carcinoma (KB3‐1) cells.     

“Click”‐Triggered Self‐Healing Graphene Nanocomposites

Strategies to compensate material fatigue are among the most challenging issues, being most prominently addressed by the use of nano‐ and microscaled fillers, or via new chemical concepts such as self‐healing materials. A capsule‐based self‐healing material is reported, where the adverse effect of reduced tensile strength due to the embedded capsules is counterbalanced by a graphene‐based filler, the latter additionally acting as a catalyst for the self‐healing reaction. The concept is based on “click”‐based chemistry, a universal methodology to efficiently link components at ambient reaction conditions, thus generating a “reactive glue” at the cracked site. A capsule‐based healing system via a graphene‐based Cu₂O (TRGO‐Cu₂O‐filler) is used, acting as both the catalytic species for crosslinking and the required reinforcement agent within the material, in turn compensating the reduction in tensile strength exerted by the embedded capsules. Room‐temperature self‐healing within 48 h is achieved, with the investigated specimen containing TRGO‐Cu₂O demonstrating significantly faster self‐healing compared to homogeneous (Cu(PPh₃)₃F, Cu(PPh₃)₃Br), and heterogeneous (Cu/C) copper(I) catalysts.

     

A Mechanochemically Triggered “Click” Catalyst

“Click” chemistry represents one of the most powerful approaches for linking molecules in chemistry and materials science. Triggering this reaction by mechanical force would enable site‐ and stress‐specific “click” reactions—a hitherto unreported observation. We introduce the design and realization of a homogeneous Cu catalyst able to activate through mechanical force when attached to suitable polymer chains, acting as a lever to transmit the force to the central catalytic system. Activation of the subsequent copper‐catalyzed “click” reaction (CuAAC) is achieved either by ultrasonication or mechanical pressing of a polymeric material, using a fluorogenic dye to detect the activation of the catalyst. Based on an N‐heterocyclic copper(I) carbene with attached polymeric chains of different flexibility, the force is transmitted to the central catalyst, thereby activating a CuAAC in solution and in the solid state.     

Synthesis of Complexes with Abnormal “Protic” N‐Heterocyclic Carbenes

Neutral 4‐iodo‐N‐ethylimidazole 3 oxidatively adds to [Pt(PPh₃)₄] to give, in the presence of different tetraalkylammonium salts, complexes trans‐[ 4 ], trans‐[ 5 ], and trans‐[ 6 ] containing an anionic C4‐bound heterocycle with an unsubstituted ring‐nitrogen atom. Complex trans‐[ 4 ] reacts with the proton source NH₄I under protonation of the ring‐nitrogen atom to produce complex trans‐[ 7 ]I which bears an NH,NR‐substituted aNHC ligand. The reaction of trans‐[ 4 ] with CH₃I yields the complex trans‐[ 8 ]I which has a classical aNHC ligand with two alkylated ring‐nitrogen atoms.     

Synthesis of dendrimers through divergent iterative thio‐bromo “Click” chemistry

The development of a novel nucleophilic thio‐bromo “Click” reaction, specifically base‐mediated thioetherification of thioglycerol with α‐bromoesters, is reported. Combination of this thio‐bromo click reaction with subsequent acylation with 2‐bromopropionyl bromide provides an iterative two‐step divergent growth approach to the synthesis of a new class of poly(thioglycerol‐2‐propionate) (PTP) dendrimers. This approach is demonstrated in the rapid preparation of four generation (G1–G4) of PTP dendrimers with high‐structural fidelity. The isolated G1–G4 bromide‐terminated dendrimers can be used directly as dendritic macroinitiators for the synthesis of star‐polymers via SET‐LRP. Additionally, the intermediate hydroxy‐terminated dendrimers are analogs of other water‐soluble polyester and polyether dendrimers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3931–3939, 2009     

IrIII and RuII Complexes Containing Triazole‐Pyridine Ligands: Luminescence Enhancement upon Substitution with β‐Cyclodextrin

Novel 2‐(1‐substituted‐1H‐1,2,3‐triazol‐4‐yl)pyridine (pytl) ligands have been prepared by “click chemistry” and used in the preparation of heteroleptic complexes of Ru and Ir with bipyridine (bpy) and phenylpyridine (ppy) ligands, respectively, resulting in [Ru(bpy)₂(pytl‐R)]Cl₂ and [Ir(ppy)₂(pytl‐R)]Cl (R=methyl, adamantane (ada), β‐cyclodextrin (βCD)). The two diastereoisomers of the Ir complex with the appended β‐cyclodextrin, [Ir(ppy)₂(pytl‐βCD)]Cl, were separated. The [Ru(bpy)₂(pytl‐R)]Cl₂ (R=Me, ada or βCD) complexes have lower lifetimes and quantum yields than other polypyridine complexes. In contrast, the cyclometalated Ir complexes display rather long lifetimes and very high emission quantum yields. The emission quantum yield and lifetime (Φ=0.23, τ=1000 ns) of [Ir(ppy)₂(pytl‐ada)]Cl are surprisingly enhanced in [Ir(ppy)₂(pytl‐βCD)]Cl (Φ=0.54, τ=2800 ns). This behavior is unprecedented for a metal complex and is most likely due to its increased rigidity and protection from water molecules as well as from dioxygen quenching, because of the hydrophobic cavity of the βCD covalently attached to pytl. The emissive excited state is localized on these cyclometalating ligands, as underlined by the shift to the blue (450 nm) upon substitution with two electron‐withdrawing fluorine substituents on the phenyl unit. The significant differences between the quantum yields of the two separate diastereoisomers of [Ir(ppy)₂(pytl‐βCD)]Cl (0.49 vs. 0.70) are attributed to different interactions of the chiral cyclodextrin substituent with the Δ and Λ isomers of the metal complex.     

Thio‐Bromo “Click” Reaction Derived Polymer–Peptide Conjugates for Their Self‐Assembled Fibrillar Nanostructures

The synthesis and self‐assembly of peptide–polymer conjugates into fibrillar nanostructures are reported, based on the amyloidogenic peptide KLVFF. A strategy for rational synthesis of polymer–peptide conjugates is documented via tethering of the amyloidogenic peptide segment LVFF (Aβ_17‐20) and its modified derivative FFFF to the hydrophilic poly(ethylene glycol) monomethyl ether (mPEG) polymer via thio‐bromo based “click” chemistry. The resultant conjugates mPEG‐LVFF‐OMe and mPEG‐FFFF‐OMe are purified via preparative gel permeation chromatography technique (with a yield of 61% and 64%, respectively), and are successfully characterized via combination of spectroscopic and chromatographic methods, including electrospray ionization time‐of‐flight mass spectrometry. The peptide‐guided self‐assembling behavior of the as‐constructed amphiphilic supramolecular materials is further investigated via transmission electron microscopic and circular dichroism spectroscopic analysis, exhibiting fibrillar nanostructure formation in binary aqueous solution mixture.     

Polysiloxane‐Based Luminescent Elastomers Prepared by Thiol–ene “Click” Chemistry

Side‐chain vinyl poly(dimethylsiloxane) has been modified with mercaptopropionic acid, methyl 3‐mercaptopropionate, and mercaptosuccinic acid. Coordinative bonding of Eu^III to the functionalized polysiloxanes was then carried out and crosslinked silicone elastomers were prepared by thiol–ene curing reactions of these composites. All these europium complexes could be cast to form transparent, uniform, thin elastomers with good flexibility and thermal stability. The networks were characterized by FTIR, NMR, UV/Vis, and luminescence spectroscopy as well as by scanning electron microscopy, thermogravimetric analysis, and X‐ray photoelectron spectroscopy. The europium elastomer luminophores exhibited intense red light at 617 nm under UV excitation at room temperature due to the ⁵D₀→⁷F₂ transition in Eu^III ions. The newly synthesized luminescent materials offer many advantages, including the desired mechanical flexibility. They cannot be dissolved or fused, and so they have potential for use in optical and electronic applications.     

ABC‐type hetero‐arm star terpolymers through “Click” chemistry

Hetero‐arm star ABC‐type terpolymers, poly(methyl methacrylate)‐polystyrene‐poly(tert‐butyl acrylate) (PMMA‐PS‐PtBA) and PMMA‐PS‐poly(ethylene glycol) (PEG), were prepared by using “Click” chemistry strategy. For this, first, PMMA‐b‐PS with alkyne functional group at the junction point was obtained from successive atom transfer radical polymerization (ATRP) and nitroxide‐mediated radical polymerization (NMP) routes. Furthermore, PtBA obtained from ATRP of tBA and commercially available monohydroxyl PEG were efficiently converted to the azide end‐functionalized polymers. As a second step, the alkyne and azide functional polymers were reacted to give the hetero‐arm star polymers in the presence of CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine ( PMDETA) in DMF at room temperature for 24 h. The hetero‐arm star polymers were characterized by ¹H NMR, GPC, and DSC. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5699–5707, 2006     

Combining Oxidative N‐Heterocyclic Carbene Catalysis with Click Chemistry: A Facile One‐Pot Approach to 1,2,3‐Triazole Derivatives

A combination of the oxidative N‐heterocyclic carbene catalysis and click chemistry has been explored for the direct, one‐pot synthesis of 1,2,3‐triazole derivatives from aromatic aldehydes. This procedure was found to be very efficient and a variety of 1,2,3‐triazole derivatives could be accessed through their corresponding propargyl esters in moderate‐to‐good yields under mild conditions.     

Cyclometalated Ruthenium(II) Complexes Featuring Tridentate Click‐Derived Ligands for Dye‐Sensitized Solar Cell Applications

A series of heteroleptic bis(tridentate) Ru^II complexes featuring N^C^N‐cyclometalating ligands is presented. The 1,2,3‐triazole‐containing tridentate ligands are readily functionalized with hydrophobic side chains by means of click chemistry and the corresponding cyclometalated Ru^II complexes are easily synthesized. The performance of these thiocyanate‐free complexes in a dye‐sensitized solar cell was tested and a power conversion efficiency (PCE) of up to 4.0 % (J_sc=8.1 mA cm^?2, V_oc=0.66 V, FF=0.70) was achieved, while the black dye ((NBu₄)₃[Ru(Htctpy)(NCS)₃]; Htctpy=2,2′:6′,2′′‐terpyridine‐4′‐carboxylic acid‐4,4′′‐dicarboxylate) showed 5.2 % (J_sc=10.7 mA cm^?2, V_oc=0.69 V, FF=0.69) under comparable conditions. When co‐adsorbed with chenodeoxycholic acid, the PCE of the best cyclometalated dye could be improved to 4.5 % (J_sc=9.4 mA cm^?2, V_oc=0.65 V, FF=0.70). The PCEs correlate well with the light‐harvesting capabilities of the dyes, while a comparable incident photon‐to‐current efficiency was achieved with the cyclometalated dye and the black dye. Regeneration appeared to be efficient in the parent dye, despite the high energy of the highest occupied molecular orbital. The device performance was investigated in more detail by electrochemical impedance spectroscopy. Ultimately, a promising Ru^II sensitizer platform is presented that features a highly functionalizable “click”‐derived cyclometalating ligand.     

New Polyalkynyl Dendrons and Dendrimers: “Click” Chemistry with Azidomethylferrocene and Specific Anion and Cation Electrochemical Sensing Properties of the 1,2,3‐Triazole‐Containing Dendrimers

Dendrimers for ion sensing : The synthesis and use of new tris‐alkynyl dendrons are reported. So‐called “click” reactions of the dendrimers described with azidomethylferrocene give 27‐ferrocenyl, 81‐ferrocenyl, and 243‐ferrocenyl dendrimers. Electrochemical recognition of oxo‐anions and Pd²⁺ cations has been compared using the three polyferrocenyl dendrimers.

     

Diels–Alder “Click” Chemistry in Designing Dendritic Macromolecules

Simple, versatile and green : Diels–Alder “click” chemistry is a simple, versatile and “greener” approach in the design of a diverse range of dendritic macromolecules (see scheme).

     

Synthesis of dendritic macromolecules through divergent iterative thio‐bromo “Click” chemistry and SET‐LRP

The development of a novel nucleophilic thio‐bromo “Click” reaction, specifically base‐mediated thioetherification of thioglycerol with α‐bromoesters was reported in an earlier article. The combination of this thio‐bromo click reaction with subsequent acylation with 2‐bromopropionyl bromide provides an iterative two‐step divergent growth approach to the synthesis of a new class of poly(thioglycerol‐2‐ propionate) (PTP) dendrimers. In this article, the addition of a third step, the single‐electron transfer living radical polymerization (SET‐LRP) of methyl acrylate (MA), was shown to provides access to a three‐step “branch” and “grow” divergent approach to dendritic macromolecules wherein poly(methyl acrylate) (PMA) connects the branching subunits. This facile methodology can provide a diversity of dendritic macromolecular topologies and will ultimately provide the means to the development of self‐organizable dendritic macromolecules. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3940–3948, 2009     

“Click” Chemistry Mildly Stabilizes Bifunctional Gold Nanoparticles for Sensing and Catalysis

A large family of bifunctional 1,2,3‐triazole derivatives that contain both a polyethylene glycol (PEG) chain and another functional fragment (e.g., a polymer, dendron, alcohol, carboxylic acid, allyl, fluorescence dye, redox‐robust metal complex, or a β‐cyclodextrin unit) has been synthesized by facile “click” chemistry and mildly coordinated to nanogold particles, thus providing stable water‐soluble gold nanoparticles (AuNPs) in the size range 3.0–11.2 nm with various properties and applications. In particular, the sensing properties of these AuNPs are illustrated through the detection of an analogue of a warfare agent (i.e., sulfur mustard) by means of a fluorescence “turn‐on” assay, and the catalytic activity of the smallest triazole–AuNPs (core of 3.0 nm) is excellent for the reduction of 4‐nitrophenol in water.     

“Click” on Tubes: a Versatile Approach towards Multimodal Functionalization of SWCNTs

Organic functionalization of carbon nanotube sidewalls is a tool of primary importance in material science and nanotechnology, equally from a fundamental and an applicative point of view. 1 , 2 Here, an efficient and versatile approach for the organic/organometallic functionalization of single‐walled carbon nanotubes (SWCNTs) capable of imparting multimodality to these fundamental nanostructures, is described. Our strategy takes advantage of well‐established Cu‐mediated acetylene‐azide coupling (CuAAC) reactions applied to phenylazido‐functionalized SWCNTs for their convenient homo‐/heterodecoration with a number of organic/organometallic frameworks, or mixtures thereof, bearing terminal acetylene pendant arms. Phenylazido‐decorated SWCNTs were prepared by chemoselective arylation of the CNT sidewalls with diazonium salts under mild conditions, and subsequently used for the copper‐mediated cycloaddition protocol in the presence of terminal acetylenes. The latter reaction was performed in one step by using either single acetylene derivatives or equimolar mixtures of terminal alkynes bearing either similar functional groups (masked with orthogonally cleavable protecting groups) or easily distinguishable functionalities (on the basis of complementary analytical/spectroscopic techniques). All materials and intermediates were characterized with respect to their most relevant aspects/properties by TEM microscopy, thermogravimetric analysis coupled with MS analysis of volatiles (TG‐MS), elemental analysis, cyclic voltammetry (CV), Raman and UV/Vis spectroscopy. The functional loading and related chemical grafting of both primary amino‐ and ferrocene‐decorated SWCNTs were spectroscopically (UV/Vis, Kaiser test) and electrochemically (CV) determined, respectively.