Ultrathin Chiral Metal–Organic‐Framework Nanosheets for Efficient Enantioselective Separation

Chiral metal–organic framework (CMOF) nanosheets only a few layers thick remain a virgin land waiting for exploration. Herein, the first examples of ultrathin CMOF nanosheets are prepared by the confinement growth of two‐dimensional (2D) chiral layers, which are assembled by helical metal–organic chains within microemulsion. This convenient and easily scaled up inverse microemulsion method gives a series of 2D CMOF nanosheets composed of variable metal nodes or chiral ligands. More significantly, thanks to the exceptionally large number of chiral sites exposed on surfaces, the as‐obtained CMOF nanosheets exhibit much higher enantioselectivity in chiral separation compared with their bulk counterparts.     

Chiral Recognition and Separation by Chirality‐Enriched Metal–Organic Frameworks

Endowed with chiral channels and pores, chiral metal–organic frameworks (MOFs) are highly useful; however, their synthesis remains a challenge given that most chiral building blocks are expensive. Although MOFs with induced chirality have been reported to avoid this shortcoming, no study providing evidence for the ee value of such MOFs has yet been reported. We herein describe the first study on the efficiency of chiral induction in MOFs using inexpensive achiral building blocks and fully recoverable chiral dopants to control the handedness of racemic MOFs. This method yielded chirality‐enriched MOFs with accessible pores. The ability of the materials to form host–guest complexes was probed with enantiomers of varying size and coordination and in solvents with varying polarity. Furthermore, mixed‐matrix membranes (MMMs) composed of chirality‐enriched MOF particles dispersed in a polymer matrix demonstrated a new route for chiral separation.     

A Post‐Synthetically Modified MOF for Selective and Sensitive Aqueous‐Phase Detection of Highly Toxic Cyanide Ions

Selective and sensitive detection of toxic cyanide (CN^?) by a post‐synthetically altered metal–organic framework (MOF) has been achieved. A post‐synthetic modification was employed in the MOF to incorporate the specific recognition site with the CN^? ion over all other anions, such as Cl^?, Br^?, and SCN^?. The aqueous‐phase sensing and very low detection limit, the essential prerequisites for an effective sensory material, have been fulfilled by the MOF. Moreover, the present detection level meets the standard set by the World Health Organization (WHO) for the permissible limit of cyanide concentration in drinking water. The utilization of MOF‐based materials as the fluorometric probes for selective and sensitive detection of CN^? ions has not been explored till now.     

A Fluorescent Sensor for Highly Selective Detection of Nitroaromatic Explosives Based on a 2D,Extremely Stable,Metal–Organic Framework

A 2D, extremely stable, metal–organic framework (MOF), NENU‐503 , was successfully constructed. It displays highly selective and recyclable properties in detection of nitroaromatic explosives as a fluorescent sensor. This is the first MOF that can distinguish between nitroaromatic molecules with different numbers of ?NO₂ groups.     

A Highly Chemically Stable Metal–Organic Framework as a Luminescent Probe for the Regenerable Ratiometric Sensing of pH

A heteroatom‐rich 3D noninterpenetrating metal–organic framework (MOF) Cd‐EDDA constructed from an ethylene glycol ether bridging tetracarboxylate ligand H₄EDDA (5,5′‐(ethane‐1,2‐diylbis(oxy))diisophthalic acid) shows good chemical resistance to both acidic and alkaline solutions with a pH ranging from 2.0 to 12.2. There is a corresponding ratiometric luminescence response to pH from 2.0 to 11.5, and the sensing mechanism is also discussed through ion chromatography and molecular force field‐based calculations. Importantly, the probe can easily be regenerated simply by modulating the pH of the solution, thus being the first example of a regenerable MOF‐based ratiometric luminescent probe for pH.     

Engineering Homochiral Metal–Organic Frameworks by Spatially Separating 1D Chiral Metal–Peptide Ladders: Tuning the Pore Size for Enantioselective Adsorption

The reaction of the chiral dipeptide glycyl‐L(S)‐glutamate with Co^II ions produces chiral ladders that can be used as rigid 1D building units. Spatial separation of these building units with linkers of different lengths allows the engineering of homochiral porous MOFs with enhanced pore sizes, pore volumes, and surface areas. This strategy enables the synthesis of a family of isoreticular MOFs, in which the pore size dictates the enantioselective adsorption of chiral molecules (in terms of their size and enantiomeric excess).     

A Terbium Metal–Organic Framework for Highly Selective and Sensitive Luminescence Sensing of Hg2+ Ions in Aqueous Solution

A series of isomorphic lanthanide metal–organic frameworks (MOFs) Ln(TATAB)?(DMF)₄(H₂O)(MeOH)_0.5 (LnTATAB, Ln=Eu, Tb, Sm, Dy, Gd; H₃TATAB=4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐p‐aminobenzoic acid) have been solvothermally synthesized and structurally characterized. Among these MOFs, TbTATAB exhibits good water stability and a high fluorescence quantum yield. Because mercury ions (Hg²⁺) have a high affinity to nitrogen atoms, and the space between multiple nitrogen atoms from triazine and imino groups is suitable for interacting with Hg²⁺ ions, TbTATAB shows highly selective and sensitive detection of Hg²⁺ in aqueous solution with a detection limit of 4.4 nm . Furthermore, it was successfully applied to detect Hg²⁺ ions in natural water samples.     

Size‐Dependent Enantioselective Adsorption of Racemic Molecules through Homochiral Metal–Organic Frameworks Embedding Helicity

Homochiral metal–organic frameworks (HMOFs) are efficient materials for enantioselective adsorption. However, the combination of size selectivity and enantioselectivity is still a major challenge in the field of HMOFs. Herein, two enantiomorphic HMOFs built from predesigned proline‐derived ligands are presented. Both of them show multiple homochiral features: they contain four different helical chains and three types of helical channels. Due to the size effect of the helical channels, each HMOF can enantioselectively adsorb methyl lactate with high ee. The results reveal a new approach toward size‐dependent enantioselective separation of racemic compounds by using HMOFs built from inexpensive proline derivatives.     

Direct and Post‐Synthesis Incorporation of Chiral Metallosalen Catalysts into Metal–Organic Frameworks for Asymmetric Organic Transformations

Two chiral porous metal–organic frameworks (MOFs) were constructed from [VO(salen)]‐derived dicarboxylate and dipyridine bridging ligands. After oxidation of V^IV to V^V, they were found to be highly effective, recyclable, and reusable heterogeneous catalysts for the asymmetric cyanosilylation of aldehydes with up to 95 % ee. Solvent‐assisted linker exchange (SALE) treatment of the pillared‐layer MOF with [Cr(salen)Cl]‐ or [Al(salen)Cl]‐derived dipyridine ligands led to the formation of mixed‐linker metallosalen‐based frameworks and incorporation of [Cr(salen)] enabled its use as a heterogeneous catalyst in the asymmetric epoxide ring‐opening reaction.     

A Bio‐inspired Approach for Chromophore Communication: Ligand‐to‐Ligand and Host‐to‐Guest Energy Transfer in Hybrid Crystalline Scaffolds

Efficient multiple‐chromophore coupling in a crystalline metal–organic scaffold was achieved by mimicking a protein system possessing 100 % energy‐transfer (ET) efficiency between a green fluorescent protein variant and cytochrome b₅₆₂. The two approaches developed for ET relied on the construction of coordination assemblies and host–guest coupling. Based on time‐resolved photoluminescence measurements in combination with calculations of the spectral overlap function and Förster radius, we demonstrated that both approaches resulted in a very high ET efficiency. In particular, the observed ligand‐to‐ligand ET efficiency value was the highest reported so far for two distinct ligands in a metal–organic framework. These studies provide important insights for the rational design of crystalline hybrid scaffolds consisting of a large ensemble of chromophore molecules with the capability of directional ET.     

Chiral Metal–Organic Framework Hollow Nanospheres for High‐Efficiency Enantiomer Separation

Chiral ZIF‐8 hollow nanospheres with d ‐histidine as part of chiral ligands (denoted as H‐d ‐his‐ZIF‐8) were prepared for separation of (±)‐amine acids. Compared to bulk d ‐his‐ZIF‐8 without a hollow cavity, the prepared H‐d ‐his‐ZIF‐8 showed 15 times higher separation capacity and higher ee values of 90.5 % for alanine, 95.2 % for glutamic acid and 92.6 % for lysine, respectively.     

A Calixarene‐Based Metal–Organic Framework for Highly Selective NO2 Detection

A calixarene‐based metal–organic framework (Zr‐cal, [Zr₆O₄(OH)₄(FA)₆]₂(cal)₃], FA=formate, cal=1,3‐alt‐25,26,27,28‐tetrakis[(carboxy)methoxy]calixarene) was synthesized and characterized by single‐crystal X‐ray diffraction. The three‐dimensional framework is a 4,6‐connected network of gar topology and exhibits two equal but nonintersecting three‐dimensional pore systems. It has a specific BET surface area of 670 m² g^?1, and the calixarene cavities are accessible through the pore systems. The exposed calixarenes can be used for the visual detection and encapsulation of NO₂ through the formation of deeply colored charge–transfer complexes inside the MOF. The highly selective complexation was analyzed by UV/Vis and IR spectroscopy, and the stability of the material was confirmed by powder X‐ray diffraction and ¹H NMR spectroscopy. Finally, the MOF was used as a sensor material in a home‐made sensor cell and showed high sensitivity for NO₂.     

A Highly Connected Porous Coordination Polymer with Unusual Channel Structure and Sorption Properties

Making connections : A hydroxy‐centered trinuclear nickel cluster has been employed to construct a highly connected, highly symmetric framework with a uninodal nine‐connected topology. An array of triakis tetrahedra leads to a biporous intersecting‐channel system (see picture).

     

Mixed‐Ligand Zn‐MOFs for Highly Luminescent Sensing of Nitro Compounds

Three Zn^II metal‐organic frameworks (Zn‐MOFs), [Zn₂(tib)(HL¹)(H₂L¹)_0.5]?2H₂O ( 1 ), [Zn₂(tib)(L²)]?H₂O ( 2 ) and [Zn₃(tib)(L³)₂(H₂O)₆]?2 H₂O ( 3 ), have been prepared by reactions of 1,3,5‐tris(1‐imidazolyl)benzene (tib), and biphenyl‐3,3′,4,4′‐tetracarboxylic acid (H₄L¹), 4,4′‐oxydiphthalic acid (H₄L²), or benzene‐1,3,5‐tricarboxylic acid (H₃L³) with corresponding Zn^II salts, respectively. Single crystal structure analyses reveal that 1 and 2 are constructed by Zn‐centered polyhedra, tib and multidentate tetracarboxylate ligands to form 3‐dimensional frameworks. In contrast, when the tetracarboxylate ligands were replaced by tricarboxylate ligand, layered structure of 3 is produced. These compounds are further characterized by powder X‐ray diffraction, element analyses, thermogravimetric analyses and photoluminescent spectroscopy. The luminescent properties of three Zn‐MOFs dispersed in different solvents have been investigated systematically, demonstrating high sensitivity for the detection of nitro compounds via a fluorescence quenching mechanism.     

Solvent‐Mediated Transformation from Achiral to Chiral Nickel(II) Metal–Organic Frameworks and Reassembly in Solution

Reactions of 5‐nitroisophthalic acid (NO₂‐H₂ip), 1,4‐bis(imidazol‐1′‐yl)butane (bimb), and Ni(NO₃)₂ ? 6 H₂O gave rise to four metal–organic frameworks (MOFs), [Ni₂(NO₂‐ip)₂(bimb)_1.5]_n ( 1 ), [Ni₄(NO₂‐ip)₃(bimb)₂(OH)₂(H₂O)]_n ? (CH₃CH₂OH)_{0.5 n} ( 2 ), [Ni(NO₂‐ip)(bimb)_1.5(H₂O)]_n ? (H₂O)_n ? (CH₃CH₂OH)_{0.5 n} ( 3 ), and [Ni(NO₂‐ip) (bimb)(μ‐H₂O)]_n ? (H₂O)_n ( 4 ). The metal/ligand ratio, pH value, and solvent exerted a subtle but crucial influence on the formation of complexes 1 – 4 , which possess different visual color and crystal structures. Complex 1 exhibits a twofold interpenetrating 3D pillared bilayer framework composed of binuclear and mononuclear Ni^II units, whereas complex 2 is a 3D chiral network that consists of asymmetric tetranuclear Ni^II units. Complexes 3 and 4 are 3D layer‐pillared frameworks that consist of mononuclear Ni^II ions and a 3D six‐connected network of μ‐water‐bridged dinuclear Ni^II units, respectively. Interestingly, achiral 4 can be transformed into chiral 2 by using a solvent‐mediated single‐crystal‐to‐single‐crystal process without any chiral auxiliary. Magnetic analyses of 2 and 4 show the occurrence of antiferromagnetic interactions. Complex 3 is difficult to obtain directly as a single solid phase, but it can be homogeneously formed by solvent‐mediated transformations from 1 , 2 , and 4 .     

Selective Sensing of Fe3+ and Al3+ Ions and Detection of 2,4,6‐Trinitrophenol by a Water‐Stable Terbium‐Based Metal–Organic Framework

A water‐stable luminescent terbium‐based metal–organic framework (MOF), {[Tb(L₁)_1.5(H₂O)] ? 3 H₂O}_n (Tb‐MOF), with rod‐shaped secondary building units (SBUs) and honeycomb‐type tubular channels has been synthesized and structurally characterized by single‐crystal X‐ray diffraction. The high green emission intensity and the microporous nature of the Tb‐MOF indicate that it can potentially be used as a luminescent sensor. In this work, we show that Tb‐MOF can selectively sense Fe³⁺ and Al³⁺ ions from mixed metal ions in water through different detection mechanisms. In addition, it also exhibits high sensitivity for 2,4,6‐trinitrophenol (TNP) in the presence of other nitro aromatic compounds in aqueous solution by luminescence quenching experiments.     

Highly Selective Detection of 2,4,6‐Trinitrophenol and Cu2+ Ions Based on a Fluorescent Cadmium–Pamoate Metal–Organic Framework

A luminescent cadmium–pamoate metal–organic framework, [Cd₂(PAM)₂(dpe)₂(H₂O)₂]?0.5(dpe) ( 1 ), has been synthesized under hydrothermal conditions by using π‐electron‐rich ligands 4,4′‐methylenebis(3‐hydroxy‐2‐naphthalenecarboxylic acid) (H₂PAM) and 1,2‐di(4‐pyridyl)ethylene (dpe). Its structure is composed of both mononuclear and dinuclear Cd^II building units, which are linked by the PAM and dpe ligands, resulting in a (4,8)‐connected 3D framework. The π‐conjugated dpe guests are located in a 1D channel of 1 . The strong emission of 1 could be quenched efficiently by trace amounts of 2,4,6‐trinitrophenol (TNP), even in the presence of other competing analogues such as 4‐nitrophenol, 2,6‐dinitrotoluene, 2,4‐dinitrotoluene, nitrobenzene, 1,3‐dinitrobenzene, hydroquinone, dimethylbenzene, and bromobenzene. The high sensitivity and selectivity of the fluorescence response of 1 to TNP shows that this framework could be used as an excellent sensor for identifying and quantifying TNP. In the same manner, 1 also exhibits superior selectivity and sensitivity towards Cu²⁺ compared with other metal ions such as Zn²⁺, Mn²⁺, Mg²⁺, K⁺, Na⁺, Ni²⁺, Co²⁺, and Ca²⁺. This is the first MOF that can serve as a dual functional fluorescent sensor for selectively detecting trace amounts of TNP and Cu²⁺.     

Triptycene‐Based Chiral Macrocyclic Hosts for Highly Enantioselective Recognition of Chiral Guests Containing a Trimethylamino Group

A new class of chiral macrocyclic arene composed of three chiral 2,6‐dihydroxyltriptycene subunits bridged by methylene groups was designed and synthesized. Structural studies showed that the macrocyclic molecule adopts a hex‐nut‐like structure with a helical chiral cavity and highly fixed conformation. Efficient resolution was achieved through the introduction of chiral auxiliaries to give a couple of enantiopure macrocycles, which exhibited high enantioselectivity towards three pairs of chiral compounds containing a trimethylamino group.