Nitrogen‐doped C60 as a robust catalyst for CO oxidation

The O₂ activation and CO oxidation on nitrogen‐doped C₅₉N fullerene are investigated using first‐principles calculations. The calculations indicate that the C₅₉N fullerene is able to activate O₂ molecules resulting in the formation of superoxide species ( ) both kinetically and thermodynamically. The active superoxide can further react with CO to form CO₂ via the Eley–Rideal mechanism by passing a stepwise reaction barrier of only 0.20 eV. Ab initio molecular dynamics (AIMD) simulation is carried out to evidence the feasibility of the Eley–Rideal mechanism. In addition, the second CO oxidation takes place with the remaining atomic O without any activation energy barrier. The full catalytic reaction cycles can occur energetically favorable and suggest a two‐step Eley–Rideal mechanism for CO oxidation with O₂ catalyzed by the C₅₉N fullerene. The catalytic properties of high percentage nitrogen‐doped fullerene (C₄₈N₁₂) is also examined. This work contributes to designing higher effective carbon‐based materials catalysts by a dependable theoretical insight into the catalytic properties of the nitrogen‐doped fullerene. © 2017 Wiley Periodicals, Inc.     

Effect of dicationic gemini surfactants 16–s‐16 (s = 4, 5, 6) on the ninhydrin‐dipeptide (glycyl‐tyrosine) reaction

The effect of dicationic gemini surfactants H₃₃C₁₆(CH₃)₂N⁺‐(CH₂)_s‐N⁺(CH₃)₂ C₁₆H₃₃, 2Br^? (s= 4, 5, 6) on the reaction of a dipeptide glycyl–tyrosine (Gly–Tyr) with ninhydrin has been studied spectrophotometrically at 70°C and pH 5.0. The reaction follows first‐ and fractional‐order kinetics, respectively, in [Gly–Tyr] and [ninhydrin]. The gemini surfactant micellar media are comparatively more effective than their single chain–single head counterpart cetyltrimethylammonium bromide (CTAB) micelles. Whereas typical rate constant (k_Ψ) increase and leveling‐off regions, just like CTAB, are observed with geminis, the latter produces a third region of increasing k_Ψ at higher concentrations. This subsequent increase is ascribed to the change in the micellar morphology of the geminis. The pseudophase model of micelles was used to quantitatively analyze the k_Ψ ? [gemini] data, wherein the micellar‐binding constants K_S for [Gly–Tyr] and K_N for ninhydrin were evaluated. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 800–809, 2012     

Synthesis of core‐crosslinked carbosilane block copolymer micelles and their thermal transformation to silicon‐based ceramics nanoparticles

Carbosilane fine particles were synthesized by core‐crosslinking of carbosilane block copolymer micelles and they were pyrolytically transformed into silica nanoparticles. The carbosilane block copolymer, poly(1‐(3‐butenyl)‐1‐methylsilacyclobutane)‐block‐polystyrene, (polyBMSB‐b‐polySt), [(m, n) = (31, 16), (54, 30), and (75, 28)], was synthesized by anionic polymerization of BMSB and St, where m and n represent polymerization degrees of BMSB and St segments, respectively. The block copolymer formed micelles in N,N‐dimethylformamide (DMF). The hydrodynamic diameters (D_h) of the micelles evaluated by dynamic light scattering ranged from 40 to 158 nm depending on the copolymer molecular weight. The core of the micelle was cross‐linked by Pt‐catalyzed hydrosilation with 1,2‐bis(dimethylsilylethane). The D_h of the core‐cross‐linked micelles in THF ranged from 56 to 164 nm. These precursor particles were pyrolyzed at 850 °C under N₂ to give ceramic nanoparticles. The diameters of the spherical ceramic particles estimated by AFM ranged from 25 to 60 nm. X‐ray fluorescence analysis of the ceramic products revealed that it consisted of mainly SiO₂ rather than SiC. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3778–3787, 2005     

Tribenzotriquinacene Receptors for C60 Fullerene Rotors: Towards C3 Symmetrical Chiral Stators for Unidirectionally Operating Nanoratchets

The synthesis of a stereochemically pure concave tribenzotriquinacene receptor ( 7 ) for C₆₀ fullerene, possessing C₃ point group symmetry, by threefold condensation of C₂‐symmetric 1,2‐diketone synthons ( 5 ) and a hexaaminotribenzotriquinacene core ( 6 ) is described. The chiral diketone was synthesized in a five‐step reaction sequence starting from C_2h‐symmetric 2,6‐di‐tert‐butylanthracene. The highly diastereo‐discriminating Diels–Alder reaction of 2,6‐di‐tert‐butylanthracene with fumaric acid di(?)menthyl ester, catalyzed by aluminium chloride, is the relevant stereochemistry introducing step. The structure of the fullerene receptor was verified by ¹H and ¹³C NMR spectroscopy, mass spectrometry and single crystal X‐ray diffraction. VCD and ECD spectra were recorded, which were corroborated by ab initio DFT calculations, establishing the chiral nature of 7 with about 99.7 % ee, based on the ee (99.9 %) of the chiral synthon ( 1 ). The absolute configuration of 7 could thus be established as all‐S [(2S,7S,16S,21S,30S,35S)‐( 7 )]. Spectroscopic titration experiments reveal that the host forms 1:1 complexes with either pure fullerene (C₆₀) or fullerene derivatives, such as rotor 1′‐(4‐nitrophenyl)‐3′‐(4‐N,N‐dimethylaminophenyl)‐pyrazolino[4′,5′:1,2][60]fullerene ( R ). The complex stability constants of the complexes dissolved in CHCl₃/CS₂ (1:1 vol. %) are K([ C₆₀ ? 7 ])=319(±156) M ^?1 and K([ R ? 7 ])=110(±50) M ^?1. With molecular dynamics simulations using a first‐principles parameterized force field the asymmetry of the rotational potential for [ R ? 7 ] was shown, demonstrating the potential suitability of receptor 7 to act as a stator in a unidirectionally operating nanoratchet.     

Water‐soluble complex formation of fullerene and thermo‐responsive diblock copolymer

A diblock copolymer (P₉₈N₁₀₀) composed of a biocompatible water‐soluble block (PMPC) and a lower critical solution temperature (LCST) type thermo‐responsive block (PNIPAM) was prepared via controlled radical polymerization. To dissolve fullerene (C₆₀) in water, the C₆₀/P₉₈N₁₀₀ complex was prepared by mixing C₆₀ and P₉₈N₁₀₀ powders. The maximum solubilized C₆₀ concentration in water was 1.39 g/L, as estimated from UV–vis adsorption, when the polymer concentration was 5.0 g/L. The percent transmittance of the aqueous solution of the C₆₀/P₉₈N₁₀₀ complex decreased above 36 °C due to inter‐complex association above the LCST for the PNIPAM block. While the hydrodynamic radius of C₆₀/P₉₈N₁₀₀ complex was 135 nm at 20 °C, it increased to 161 nm at 50 °C. Despite the observation of ¹H NMR signals from PMPC and PNIPAM blocks for the C₆₀/P₉₈N₁₀₀ complex in D₂O at room temperature, the signals from PNIPAM disappeared above 35 °C due to restricted motion of PNIPAM. Generation of singlet oxygen (¹O₂) from the C₆₀/P₉₈N₁₀₀ complex by photo‐irradiation was confirmed using 9,10‐anthracene dipropionic acid (ADPA). The absorbance of ADPA decreased with increasing irradiation time due to oxidation of ADPA by ¹O₂. It is expected that the C₆₀/P₉₈N₁₀₀ complex can be applied as a thermo‐responsive carrier for photodynamic therapy. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2432–2439     

Using the reversible addition–fragmentation chain transfer process to synthesize core‐crosslinked micelles

Poly(2‐hydroxyethyl acrylate)–poly(n‐butyl acrylate) block copolymers were synthesized with the reversible addition–fragmentation chain transfer (RAFT) process. The block copolymers were synthesized successfully with either poly(2‐hydroxyethyl acrylate) or poly(n‐butyl acrylate) macro‐RAFT agents. The resulting block copolymers had narrow molecular weight distributions (polydispersity index = 1.3–1.4). Copolymer self‐aggregation in water yielded micelles, with the hydrodynamic diameter (D_h) values of the aggregates dependent on the length of both blocks according to D_h ～ N_BA^1.17N_HEA^0.57, where N_BA is the number of repeating units of n‐butyl acrylate and N_HEA is the number of repeating units of 2‐hydroxyethyl acrylate. The micelles were subsequently stabilized via chain extension of the block copolymer with a crosslinking agent. The successful chain extension in a micellar system was confirmed by an increase in the molecular weight, which was detected with membrane osmometry. The crosslinked particles showed noticeably different aggregation behavior in diverse solvent systems. The uncrosslinked micelles formed by the block copolymer (N_HEA = 260, N_BA = 75) displayed a definite critical micelle concentration at 5.4 × 10^?4 g L^?1 in aqueous solutions. However, upon crosslinking, the critical micelle concentration transition became obscure. © 2006Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2177–2194, 2006     

Synthesis of well‐defined side chain fullerene polymers and study of their self‐aggregation behaviors

Monoalkynyl‐functionalized fullerene was precisely synthesized starting with pristine fullerene (C₆₀) and characterized by multiple techniques. Methyl methacrylate and 6‐azido hexyl methacrylate were then randomly copolymerized via reversible addition fragmentation chain transfer polymerization to build polymer backbones with well‐controlled molecular weights and copolymer compositions. Finally, these two moieties were covalently assembled into a series of well‐defined side chain fullerene polymers (SFPs) via the copper‐mediated click reaction which was verified by Fourier transform infrared spectroscopy and ¹H NMR. The fullerene loadings of the resultant polymers were estimated by thermogravimetric analysis and UV–vis spectroscopy, demonstrating consistent and high conversions in most of the samples. The morphology studies of the SFPs were performed both in solution and on solid substrates. Very intriguing self‐aggregation behaviors were detected by both gel permeation chromatography and dynamic light scattering analyses. Furthermore, the scanning electron microscopic images of these polymers showed the formation of various supramolecular nanoparticle assemblies and crystalline‐like clusters depending on the fullerene contents and polymer chain lengths. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3572–3582     

Optical properties of (Z)‐2‐(2‐phenylhydrazinylidene)acenaphthen‐1(2H)‐one: a potential electron donor in organic solar cells

Electron‐donating molecules play an important role in the development of organic solar cells. (Z )‐2‐(2‐Phenylhydrazinylidene)acenaphthen‐1(2H )‐one (PDAK), C₁₈H₁₂N₂O, was synthesized by a Schiff base reaction. The crystal structure shows that the molecules are planar and are linked together forming `face‐to‐face' assemblies held together by intermolecular C—H…O, π–π and C—H…π interactions. PDAK exhibits a broadband UV–Vis absorption (200–648 nm) and a low HOMO–LUMO energy gap (1.91 eV; HOMO is the highest occupied molecular orbital and LUMO is the lowest unoccupied molecular orbital), while fluorescence quenching experiments provide evidence for electron transfer from the excited state of PDAK to C₆₀. This suggests that the title molecule may be a suitable donor for use in organic solar cells.     

The Orthogonal (e,e,e)‐Tris‐Adduct of 9,10‐Dimethylanthracene with C60‐Fullerene: A Hidden Cornerstone of Fullerene Chemistry. Preliminary Communication

Tris(9′,10′‐dimethyl[9,10]ethanoanthracene[11′,12′: 1,9;11″,12″: 16,17;11′′′,12′′′: 30,31])[5,6]fullerene C₆₀, the orthogonal (e,e,e)‐tris‐adduct of C₆₀ and 9,10‐dimethylanthracene, was obtained from [4+2]‐cycloaddition (Diels–Alder reaction) at room temperature. The thermally unstable orange red (e,e,e)‐tris‐adduct was purified by chromatography and was isolated in the form of red monoclinic crystals. Its C₃‐symmetric addition pattern was established spectroscopically. Its structure could be further investigated by single crystal X‐ray diffraction. The (e,e,e)‐tris‐adduct of C₆₀ and 9,10‐dimethylanthracene has earlier been suggested as intermediate and reversibly formed critical component in ‘template directed’ addition reactions of C₆₀. This previously elusive compound has now been isolated and structurally characterized.     

Preparation of polymeric vesicles through ultrasonic treatment of poly(styrene‐block‐2‐vinylpyridine) micelles under alkaline conditions

An approach for the preparation of block copolymer vesicles through ultrasonic treatment of polystyrene‐block‐poly(2‐vinyl pyridine) (PS‐b‐P2VP) micelles under alkaline conditions is reported. PS‐b‐P2VP block copolymers in toluene, a selective solvent for PS, form spherical micelles. If a small amount of NaOH solution is added to the micelles solution during ultrasonic treatment, organic‐inorganic Janus‐like particles composed of the PS‐b‐P2VP block copolymers and NaOH are generated. After removal of NaOH, block copolymer vesicles are obtained. A possible mechanism for the morphological transition from spherical micelles to vesicles or Janus‐like particles is discussed. If the block copolymer micelles contain inorganic precursors, such as FeCl₃, hybrid vesicles are formed, which may be useful as biological and chemical sensors or nanostructured templates. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 953–959     

High‐Potential Perfluorinated Phthalocyanine–Fullerene Dyads for Generation of High‐Energy Charge‐Separated States: Formation and Photoinduced Electron‐Transfer Studies

High oxidation potential perfluorinated zinc phthalocyanines (ZnF_nPcs) are synthesised and their spectroscopic, redox, and light‐induced electron‐transfer properties investigated systematically by forming donor–acceptor dyads through metal–ligand axial coordination of fullerene (C₆₀) derivatives. Absorption and fluorescence spectral studies reveal efficient binding of the pyridine‐ (Py) and phenylimidazole‐functionalised fullerene (C₆₀Im) derivatives to the zinc centre of the F_nPcs. The determined binding constants, K, in o‐dichlorobenzene for the 1:1 complexes are in the order of 10⁴ to 10⁵ M ^?1; nearly an order of magnitude higher than that observed for the dyad formed from zinc phthalocyanine (ZnPc) lacking fluorine substituents. The geometry and electronic structure of the dyads are determined by using the B3LYP/6‐31G* method. The HOMO and LUMO levels are located on the Pc and C₆₀ entities, respectively; this suggests the formation of ZnF_nPc^.+–C₆₀Im^.? and ZnF_nPc^.+–C₆₀Py^.? (n=0, 8 or 16) intra‐supramolecular charge‐separated states during electron transfer. Electrochemical studies on the ZnPc–C₆₀ dyads enable accurate determination of their oxidation and reduction potentials and the energy of the charge‐separated states. The energy of the charge‐separated state for dyads composed of ZnF_nPc is higher than that of normal ZnPc–C₆₀ dyads and reveals their significance in harvesting higher amounts of light energy. Evidence for charge separation in the dyads is secured from femtosecond transient absorption studies in nonpolar toluene. Kinetic evaluation of the cation and anion radical ion peaks reveals ultrafast charge separation and charge recombination in dyads composed of perfluorinated phthalocyanine and fullerene; this implies their significance in solar‐energy harvesting and optoelectronic device building applications.     

Synthesis and characterization of well‐defined,amphiphilic poly(N‐isopropylacrylamide)‐ b‐[2‐hydroxyethyl methacrylate‐poly(ϵ‐caprolactone)]n graft copolymers by RAFT polymerization and macromonomer method

The well‐defined, thermosensitive and biodegradable graft copolymers, poly(N‐isopropylacrylamide)‐b‐[2‐hydroxyethyl methacrylate‐poly(ε‐caprolactone)]_n (PNIPAAm‐b‐(HEMA‐PCL)_n) (n = 3 or 9), were synthesized by combining reversible addition‐fragmentation chain transfer polymerization and macromonomer method. The copolymers were able to self‐assemble into micelles in water with low critical micellar concentration and demonstrated temperature sensitivity with a lower critical solution temperature at around 36 °C. Transmission electron microscopy shows that the micelles exhibit a nanosized spherical morphology within a size range of 30–100 nm. The PNIPAAm‐b‐(HEMA‐PCL)₃ copolymer exhibited biodegradation and low cytotoxicity. The paclitaxel‐loaded PNIPAAm‐b‐(HEMA‐PCL)₃ micelles displayed thermosensitive controlled release behavior, which indicates potential as drug carriers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5354–5364, 2007     

Structure‐Dependent Photoinduced Electron Transfer in Fullerodendrimers with Light‐Harvesting Oligophenylenevinylene Terminals

Oligophenylenevinylene (OPV)‐terminated phenylenevinylene dendrons G1 – G4 with one, two, four, and eight “side‐arms”, respectively, were prepared and attached to C₆₀ by a 1,3‐dipolar cycloaddition of azomethine ylides generated in situ from dendritic aldehydes and N‐methylglycine. The relative electronic absorption of the OPV moiety increases progressively along the fullerodendrimer family C₆₀G1 – C₆₀G4 , reaching a 99:1 ratio for C₆₀G4 (antenna effect). UV/Vis and near‐IR luminescence and transient absorption spectroscopy was used to elucidate photoinduced energy and electron transfer in C₆₀G1 – C₆₀G4 as a function of OPV moiety size and solvent polarity (toluene, dichloromethane, benzonitrile), taking into account the fact that the free‐energy change for electron transfer is the same along the series owing to the invariability of the donor–acceptor couple. Regardless of solvent, all the fullerodendrimers exhibit ultrafast OPV→C₆₀ singlet energy transfer. In CH₂Cl₂, the OPV→C₆₀ electron transfer from the lowest fullerene singlet level (¹C₆₀*) is slightly exergonic (ΔG_CS≈0.07 eV), but is observed, to an increasing extent, only in the largest systems C₆₀G2 – C₆₀G4 with lower activation barriers for electron transfer. This effect has been related to a decrease of the reorganization energy upon enlargement of the molecular architecture. Structural factors are also at the origin of an unprecedented OPV→C₆₀ electron transfer observed for C₆₀G3 and C₆₀G4 in apolar toluene, whereas in benzonitrile, electron transfer occurs in all cases. Monitoring of the lowest fullerene triplet state by sensitized singlet oxygen luminescence and transient absorption spectroscopy shows that this level is populated through intersystem crossing and is not involved in photoinduced electron transfer.     

Metallic and Mott Insulating Spin‐Frustrated Antiferromagnetic States in Ionic Fullerene Complexes with a Two‐Dimensional Hexagonal C60.− Packing Motif

(MDABCO⁺)(C₆₀^.?)(TPC) ( 1 ), in which MDABCO⁺ is N‐methyldiazabicyclooctanium, TPC is triptycene, and both have threefold symmetry, is a rare example of a fullerene‐based quasi‐2D metal and contains closely packed hexagonal fullerene layers with interfullerene center‐to‐center distances of 10.07 Å at 300 K. Evidence for the metallic nature of 1 was obtained by optical and microwave conductivity measurements on single crystals. The metal is characterized by a nontypical Drude response and relatively large optical mass (m*/m₀=6.7). The latter indicates a narrow‐band nature, which is consistent with the calculated bandwidth of 0.10–0.15 eV. The coexistence of metallic and antiferromagnetic nonmetallic 2D layers was observed in 1 above 200–230 K. It was assumed that the nonmetallic layers undergo a transition to the metallic state below 200 K due to ordering of the fullerene and cationic sublattices. New layered complex (MQ⁺)(C₆₀^.?)(TPC) ( 2 ) with a hexagonal arrangement of C₆₀^.? was obtained by increasing the interfullerene distance with the bulkier N‐methylquinuclidinium cations (MQ⁺) having threefold symmetry. The structure of 2 is characterized by increased interfullerene center‐to‐center distances in the layers (10.124, 10.155, and 10.177 Å at 250 K). Unit‐cell doubling parallel to the 2D layer (along the b axis) was observed at low temperatures. In contrast to metallic 1 , 2 exhibits a nonmetallic spin‐frustrated state with an antiferromagnetic interaction of spins (the Weiss temperature is ?27 K) and no magnetic ordering down to 1.9 K. It was supposed that the expanded interfullerene distances in the triangular arrangement decrease the bandwidth and suppress metallic conductivity in 2 , and thus a Mott–Hubbard insulating state with antiferromagnetically frustrated spins results.     

Synthesis of maltopentaose‐conjugated surface‐active styrenic monomers and their micellar homopolymerization in water

Maltopentaose (Mal₅)‐conjugated surface‐active styrenic monomers 1a , 1b , and 1c are described, which contain hydrophobic spacers, such as C1, C5, and C7 alkylene chains, respectively. The glycomonomers 1a‐c were synthesized by the direct β‐N‐glycosyl reaction of styrene derivatives with aminoalkyl groups 4a‐c onto Mal₅ in dry methanol, followed by the N‐acetylation with acetic anhydride. The self‐assembling properties for the aqueous solutions of 1a‐c were characterized by surface tension measurements and light scattering experiments, providing the physicochemical parameters for the formed 1a‐c micelles including the critical micelle concentration, apparent hydrodynamic radius (R_h,app), and weight average aggregation number (N_agg). The transmission electron microscope observations revealed the most important result in this study that 1a produced loose spherical micelles with the number average diameter (d_n) of 26 nm, while both 1b and 1c formed worm‐like micelles with the polymerizable core and the Mal₅ shell, whose number average contour lengths (l_ns) were 130 nm and 68 nm, respectively. The radical homopolymerizations of 1a‐c in water provided a substantial result in this study that 1b and 1c , that is, the glycomonomers forming the worm‐like micelles, showed a very high homopolymerizability in water. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1671–1679     

Ferrocenyl amphiphilic Janus dendrimers as redox‐responsive micellar carriers

Amphiphilic Janus dendrimers have attracted increasing attention due to their asymmetric structures and various functional properties compared to the conventional symmetric macromolecules. Herein, a novel ferrocenyl‐terminated amphiphilic Janus dendrimer containing nine hydrophilic triethylene glycol branches was synthesized by two synthetic routes, namely the typical chemo selective coupling method and the mixed modular approach. Chemical redox triggers, namely Fe₂(SO₄)₃ as oxidant and ascorbic acid as reductant, could regulate the self‐assembly behavior of the Janus dendrimer in water through the redox‐switching between ferrocene and ferricinium cations, and the change of micelles formed were investigated and confirmed through scanning electron microscopy and dynamic light scattering. The cargo‐loading property of the micelles self‐assembled by the Janus dendrimer was further proved by the successful fabrication of Rhodamine B (RhB)‐loaded micelles, and the oxidation‐triggered release behavior of the encapsulated RhB could be mediated by changing the concentration of oxidants. This work provides an effective approach to prepare ferrocenyl‐terminated amphiphilic Janus dendrimers and the self‐assembled micelles might be used as a promising molecular carrier in areas such as drug delivery and catalysis.     

The crystal structure,luminescence and nitrobenzene‐sensing properties of a two‐dimensional MnII coordination polymer based on 2,6‐bis(imidazol‐1‐yl)pyridine

A two‐dimensional Mn^II coordination polymer (CP), poly[bis[μ₂‐2,6‐bis(imidazol‐1‐yl)pyridine‐κ²N³:N^3′]bis(thiocyanato‐κN)manganese] [Mn(NCS)₂(C₁₁H₉N₅)₂]_n, (I), has been obtained by the self‐assembly reaction of Mn(ClO₄)₂·6H₂O, NH₄SCN and bent 2,6‐bis(imidazol‐1‐yl)pyridine (2,6‐bip). CP (I) was characterized by FT–IR spectroscopy, elemental analysis and single‐crystal X‐ray diffraction. The crystal structure features a unique two‐dimensional (4,4) network with one‐dimensional channels. The luminescence and nitrobenzene‐sensing properties were explored in a DMF suspension, revealing that CP (I) shows a strong luminescence emission and is highly sensitive for nitrobenzene detection.     

Pseudopolymorphs of 2,6‐diaminopyrimidin‐4‐one and 2‐amino‐6‐methylpyrimidin‐4‐one: one or two tautomers present in the same crystal

The derivatives of pyrimidin‐4‐one can adopt either a 1H‐ or a 3H‐tautomeric form, which affects the hydrogen‐bonding interactions in cocrystals with compounds containing complementary functional groups. In order to study their tautomeric preferences, we crystallized 2,6‐diaminopyrimidin‐4‐one and 2‐amino‐6‐methylpyrimidin‐4‐one. During various crystallization attempts, four structures of 2,6‐diaminopyrimidin‐4‐one were obtained, namely solvent‐free 2,6‐diaminopyrimidin‐4‐one, C₄H₆N₄O, (I), 2,6‐diaminopyrimidin‐4‐one–dimethylformamide–water (3/4/1), C₄H₆N₄O·1.33C₃H₇NO·0.33H₂O, (Ia), 2,6‐diaminopyrimidin‐4‐one dimethylacetamide monosolvate, C₄H₆N₄O·C₄H₉NO, (Ib), and 2,6‐diaminopyrimidin‐4‐one–N‐methylpyrrolidin‐2‐one (3/2), C₄H₆N₄O·1.5C₅H₉NO, (Ic). The 2,6‐diaminopyrimidin‐4‐one molecules exist only as 3H‐tautomers. They form ribbons characterized by R²₂(8) hydrogen‐bonding interactions, which are further connected to form three‐dimensional networks. An intermolecular N—H...N interaction between amine groups is observed only in (I). This might be the reason for the pyramidalization of the amine group. Crystallization experiments on 2‐amino‐6‐methylpyrimidin‐4‐one yielded two isostructural pseudopolymorphs, namely 2‐amino‐6‐methylpyrimidin‐4(3H)‐one–2‐amino‐6‐methylpyrimidin‐4(1H)‐one–dimethylacetamide (1/1/1), C₅H₇N₃O·C₅H₇N₃O·C₄H₉NO, (IIa), and 2‐amino‐6‐methylpyrimidin‐4(3H)‐one–2‐amino‐6‐methylpyrimidin‐4(1H)‐one–N‐methylpyrrolidin‐2‐one (1/1/1), C₅H₇N₃O·C₅H₇N₃O·C₅H₉NO, (IIb). In both structures, a 1:1 mixture of 1H‐ and 3H‐tautomers is present, which are linked by three hydrogen bonds similar to a Watson–Crick C–G base pair.     

An Open‐Cage Fullerene That Mimics the C60H10 (5,5)‐Carbon Nanotube Endcap to Host Acetylene and Hydrogen Cyanide Molecules

Treatment of the open‐cage fullerene C₆₃H₄NO₂(Ph)₂(Py)(N₂C₆H₄) ( 1 ) with methanol at 150 °C results in an orifice‐enlargement reaction to give C₆₉H₈NO(CO₂Me)(Ph)(Py)(N₂C₆H₄) ( 2 ). The overall yield from C₆₀ to isolated 2 is 6.1 % (four steps). Compound 2 contains a 24‐membered elliptic orifice that spans 8.45 Å along the major axis and 6.37 Å along the minor axis. The skeleton of 2 resembles the hypothetic C₆₀H₁₀ (5,5)‐carbon nanotube endcap. The cup‐shaped structure of 2 is able to include water, hydrogen cyanide, and acetylene, forming H₂O@ 2 , HCN@ 2 , and C₂H₂@ 2 , respectively. The molecular structures of H₂O@ 2 and HCN@ 2 have been determined by X‐ray crystallography. The ¹H NMR spectra reveal substantial upfield shifts for the endohedral species, such as δ=?10.30 (for H₂O), ?2.74 and ?14.26 (for C₂H₂), and ?1.22 ppm (for HCN), owing to the strong shielding effects of the fullerene cage.     

Polymer‐assisted biocatalysis: Unprecedented enzymatic oxidation of fullerene in aqueous medium

Enzymatic complexes, constructed by linear‐dendritic copolymers and laccase, are used for the unprecedented one‐pot biotransformation of fullerene (C₆₀) into epoxide‐ and hydroxyl‐derivatives under mild and environmentally friendly reaction conditions (45 °C and aqueous medium). The reaction is catalyzed by mediator pairs ‐ N‐hydroxy‐5‐norbornene‐2,3‐dicarboxylic acid imide/1‐Hydroxybenzotriazole or 2,2′‐Azino‐bis(3‐ethylbenzothiazoline‐6‐sulfonic acid)/1‐Hydroxybenzotriazole used in equimolar amounts. After 24 and 48 h, the biotransformation products ? C₆₀O_n, C₆₀(OH)_n, C₆₀(H)_n(OH)_n, and/or C₆₀O_n(H)_m(OH)_m range between 50 and 78%, respectively. Their structure is revealed by FTIR, NMR, and mass‐spectrometry. The mechanism of the process is discussed and elucidated. The reaction procedure allows the repeated usage of the enzyme/linear‐dendritic complex, which retains its catalytic activity after several cycles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012