We report herein for the first time the incorporation of a versatile organocatalyst, 4‐(N,N‐dimethylamino)pyridine (DMAP), into the network of a nanoporous conjugated polymer (NCP) by the “bottom‐up” approach. The resulting DMAP‐NCP material possesses highly concentrated and homogeneously distributed DMAP catalytic sites (2.02 mmol g?1). DMAP‐NCP also exhibits enhanced stability and permanent porosity due to the strong covalent linkage and the rigidity of the “bottom‐up” monomers. As a result, DMAP‐NCP shows excellent catalytic activity in the acylation of alcohols with yields of 92–99 %. The DMAP‐NCP catalyst could be easily recovered from the reaction mixture and reused in at least 14 consecutive cycles without measurable loss of activity. Moreover, the catalytic acylation reaction could be performed under neat and continuous‐flow conditions for at least 536 h of continuous work with the same catalyst activity. 相似文献
Dithienothiophene (DTT) based conjugated microporous polymers (CMPs) were synthesized by bulk and electrochemical oxidative polymerizations. Spectroelectrochemical measurements showed that DTT‐CMP can be reversibly oxidized and reduced, accompanied by a significant change of the absorption properties making the material interesting for electrochromic devices. Reversible doping and dedoping of the bulk polymer network was also observed using iodine and ammonia, respectively. Nitrogen gas sorption measurements of the neutral, doped, and dedoped polymer networks indicated the presence of iodide species within the pores, and the conductivity of the networks is highly increased upon doping with iodine. The introduction of the strong electron donor DTT into a conjugated porous network, and the ability for redox switching, make DTT‐CMPs interesting materials for organo(opto)electronic devices and sensors. 相似文献
A novel MnFe2O4–porous organic polymer (POP) nanocomposite was synthesized by a facile hydrothermal method and using the highly cross‐linked N‐rich benzene–benzylamine POP. The nanocomposite presented highly efficient photocatalytic performance in the hydrogen evolution reaction (HER) from pure water without addition of any sacrificial agent under one AM 1.5 G sunlight illumination. A photocatalytic activity of 6.12 mmol h?1 g?1 was achieved in the absence of any noble metal cocatalyst, which is the highest H2 production rate reported for nonprecious metal catalysts. The photocatalytic performance of MnFe2O4‐POP could be attributed to the intrinsic synergistic effects of manganese ferrite (MnFe2O4) nanoclusters interacting with the nitrogen dopant POP with a unique mesoporous nanoarchitecture and spatially confined growth of MnFe2O4 in the interconnected POP network, leading to high visible‐light absorption with fast electron transport. 相似文献
A luminescent conjugated microporous polymer (BCMP‐3) has been synthesized in high yield by a carbon–carbon coupling reaction using triarylboron as a building unit. BCMP‐3 was fully characterized by using powder X‐ray diffraction analysis, Fourier transform infrared spectroscopy, 13C solid‐state NMR spectroscopy, field emission scanning electron microscopy, thermogravimetric analysis, and nitrogen and carbon dioxide adsorption. The new three‐dimensional conjugated framework possess a high Brunauer–Emmett–Teller (BET) specific surface area up to 950 m2 g?1 with a pore volume of 0.768 cm3 g?1, good stability, and abundant boron sites in the skeleton. Under excited‐light irradiation, BCMP‐3 exhibits strong fluorescent emission at 488 nm with a high absolute quantum yield of 18 % in the solid state. Polymer BCMP‐3 acts as a colorimetric and fluorescent chemosensor with high sensitivity and selectivity for F? over other common anions. In addition, the polymer also works as an adsorbent for F? removal and shows good adsorption capacities of up to 24 mg g?1 at equilibrium F? concentrations of 16 mg L?1 and a temperature of 298 K. The adsorption kinetics and isotherm were analyzed by fitting experimental data with pseudo‐second‐order kinetics and Langmuir equations. Furthermore, we highlight that BCMP‐3 is an adsorbent for fluoride removal that can be efficiently reused many times without loss of adsorption efficiency. 相似文献
A new method of preparing conductive polymer composites by growing crystalline networks of conductive additives in polymer matrices (reticulate doping) is described. The method consists of treating the polymer containing molecularly dispersed donor additive with acceptor/solvent vapors. In the swollen polymer layer simultaneously CT complex formation and crystallization takes place which for proper conditions leads to the formation of a network of the CT complex crystallites, making the film surface-conducting. The preparation and properties of surface conductive films using several electron donors and an iodine acceptor are described. The films obtained show surface resistivities of 104–106 ohm and are generally stable under ambient conditions. 相似文献
The reaction of 1-methyl-3-methylthio-5-phenyl-1,2,4-triazinium (MTPT) iodide with diiodine in a solution leads to monoiodide crystal structure that in excess of iodine gives the unusual tetraiodide anion with two central iodine atoms in disorder. The bonding within the anion has been characterized as I–…I2…I–; the existence of the bound iodine molecule inside has been proven by the characteristic band in experimental and calculated Raman spectra. Non-covalent interactions of MTPT in considered crystal structures are different. Monoiodide anion as a strong electron donor allows the formation of the S…I chalcogen bonds that are absent in tetraiodide structure. The features of halogen bonds within the I42– anion are also performed.
The covalent triazine‐based framework (TDPDB) has been prepared by Friedel‐Crafts polymerization reaction of N,N′‐diphenyl‐N,N′‐di(m‐tolyl)benzidine (DPDB) with 2,4,6‐trichloro‐1,3,5‐triazine (TCT) catalyzed by methanesulfonic acid. The yield of the reaction (94.85%) is very high. TDPDB was provided with Brunauer‐Emmett‐Teller specific surface area of 592.18 m2 g?1 and pore volume of 0.5241 cm3 g?1. TDPDB demonstrated an excellent capacity for capturing iodine (3.93 g g?1) and an outstanding ability to fluorescent sensing to iodine with Ksv of 5.83 × 104 L mol?1. It also showed high fluorescent sensing sensitivity to picric acid. 相似文献
A novel strategy has been adopted for the construction of a copolymer of benzene–benzylamine‐1 (BBA‐1), which is a porous organic polymer (POP) with a high BET surface area, through Friedel–Crafts alkylation of benzylamine and benzene by using formaldehyde dimethyl acetal as a cross‐linker and anhydrous FeCl3 as a promoter. Ruthenium nanoparticles (Ru NPs) were successfully distributed in the interior cavities of polymers through NaBH4, ethylene glycol, and hydrothermal reduction routes, which delivered Ru‐A, Ru‐B, and Ru‐C materials, respectively, and avoided aggregation of metal NPs. Homogeneous dispersion, the nanoconfinement effect of the polymer, and the oxidation state of Ru NPs were verified by employing TEM, energy‐dispersive X‐ray spectroscopy mapping, cross polarization magic‐angle spinning 13C NMR spectroscopy, and X‐ray photoelectron spectroscopy analytical tools. These three new Ru‐based POP materials exhibited excellent catalytic performance in the hydrogenation of nitroarenes at RT (with a reaction time of only ≈30 min), with high conversion, selectivity, stability, and recyclability for several catalytic cycles, compared with other traditional materials, such as Ru@C, Ru@SiO2, and Ru@TiO2, but no clear agglomeration or loss of catalytic activity was observed. The high catalytic performance of the ruthenium‐based POP materials is due to the synergetic effect of nanoconfinement and electron donation offered by the 3D POP network. DFT calculations showed that hydrogenation of nitrobenzene over the Ru (0001) catalyst surface through a direct reaction pathway is more favorable than that through an indirect reaction pathway. 相似文献
A series of π‐conjugated polymers linked by benzocarborane (1,2‐(buta‐1′,3′‐diene‐1′,4′‐diyl)‐1,2‐dicarbadodecaborane) were synthesized via Sonogashira–Hagihara polycondensation reaction. The opened molecular structure of diiodo monomer containing benzocarborane resulted in fast polymerization and high molecular weights. The obtained polymers were fully characterized by 1H, 13C, and 11B NMR spectroscopies. UV‐vis absorption and photoluminescence studies revealed the acceptor‐profile of benzocarborane. Unlike the polymers linked by o‐carborane, these polymers exhibited strong luminescence in the solution state, presumably because the inductive effect of carborane is dominant, rather than cage‐π interactions.