Colloidal Surface Active Maghemite Nanoparticles for Biologically Safe CrVI Remediation: from Core‐Shell Nanostructures to Pilot Plant Development

The present study is aimed at the exploration of achievable improvements for Cr^VI ex situ and in situ water remediation by using novel naked colloidal maghemite (γ‐Fe₂O₃) nanoparticles (surface active maghemite nanoparticles, SAMNs). The reliability of SAMNs for Cr^VI binding and removal was demonstrated, and SAMN@Cr^VI complex was characterized, as well as the covalent nature of the absorption was unequivocally proved. SAMNs were structurally and magnetically well conserved after Cr^VI binding. Thus, in consideration of their affinity for Cr^VI, SAMNs were exploited in a biological model system, mimicking a real in situ application. The assay evidenced a progressive reduction of revertant colonies of Salmonella typhimurium TA100 strain, as maghemite nanoparticles concentration increased, till the complete suppression of Cr^VI mutagen effect. Finally, an automatic modular pilot system for continuous magnetic removal and recovery of Cr^VI from water is proposed. SAMNs, thanks to their colloidal, binding, and catalytic properties, represent a promising tool as a reliable nanomaterial for water remediation by Cr^VI.     

Electrocatalytic Nanostructured Ferric Tannates: Characterization and Application of a Polyphenol Nanosensor

A novel core–shell hybrid nanomaterial composed of peculiar maghemite nanoparticles (surface‐active maghemite nanoparticles (SAMNs)) as the core and tannic acid (TA) as the shell was developed by self‐assembly of ferric tannates onto the surface of SAMNs by simple incubation in water. The hybrid nanomaterial (SAMN@TA) was characterized by using UV/Vis, FTIR, and Mössbauer spectroscopies, magnetization measurements, and X‐ray powder diffraction, which provide evidence of a drastic reorganization of the iron oxide surface upon reaction with TA and the formation of an outer shell that consists of a cross‐linked network of ferric tannates. According to a Langmuir isotherm analysis, SAMN@TA offers one of most stable iron complexes of TA reported in the literature to date. Moreover, SAMN@TA was characterized by using electrical impedance spectroscopy, voltammetry, and chronoamperometry. The nanostructured ferric tannate interface showed improved conductivity and selective electrocatalytic activity toward the oxidation of polyphenols. Finally, a carbon‐paste electrode modified with SAMN@TA was used for the determination of polyphenols in blueberry extracts by square‐wave voltammetry.     

Ternary Hybrid γ‐Fe2O3/CrVI/Amine Oxidase Nanostructure for Electrochemical Sensing: Application for Polyamine Detection in Tumor Tissue

Dichromate binds to surface‐active maghemite nanoparticles (SAMNs) to form a stable core–shell nanostructures (SAMN@Cr^VI). The hybrid was characterized by Mössbauer spectroscopy, high‐angle annular dark‐field imaging, electron energy‐loss spectroscopy, and electrochemical techniques, which revealed a strong interaction of dichromate with the nanoparticle surface. Electrochemical characterization showed lower charge‐transfer resistance, better electrochemical performance, and more reversible electrochemical behavior with respect to naked SAMNs. Moreover, SAMN@Cr^VI is an excellent electrocatalyst for hydrogen peroxide reduction. Furthermore, an enzyme, namely, bovine serum amine oxidase (BSAO: EC 1.4.3.6), was immobilized on SAMN@Cr^VI by self‐assembly to give a ternary hybrid nanostructured catalyst for polyamine oxidation (SAMN@Cr^VI‐BSAO). SAMN@Cr^VI‐BSAO was applied for the development of a reagentless, fast, inexpensive, and interference‐free polyamine biosensor, which was successfully exploited for the discrimination of tumorous tissue from healthy tissue in human crude liver extracts.     

Grafting of poly(ε‐caprolactone) onto maghemite nanoparticles

We report the coating of maghemite (γ‐Fe₂O₃) nanoparticles with poly(ε‐caprolactone) (PCL) through a covalent grafting to technique. ω‐Hydroxy‐PCL was first synthesized by the ring‐opening polymerization of ε‐caprolactone with aluminum isopropoxide and benzyl alcohol as a catalytic system. The hydroxy end groups of PCL were then derivatized with 3‐isocyanatopropyltriethoxysilane in the presence of tetraoctyltin. The triethoxysilane‐functionalized PCL macromolecules were finally allowed to react on the surface of maghemite nanoparticles. The composite nanoparticles were characterized by diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy, thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). Effects of the polymer molar mass and concentration on the amount of polymer grafted to the surface were investigated. Typical grafting densities up to 3 μmol of polymer chains per m² of maghemite surface were obtained with this grafting to technique. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6011–6020, 2004     

Magnetically polymeric nanocarriers for targeting delivery of curcumin and hyperthermia treatments toward cancer cells

Magnetically polymeric nanocarriers, Cur‐FA‐SAMN, were designed and synthesized for targeting, therapeutic treatments to cancer cells. Amine‐group immobilized iron oxides, Fe₃O₄‐NH₂, were attached on the surface of self‐assembled tri‐block copolymer, poly[(acrylic acid)‐block‐(N‐isopropylacrylamide)‐block‐(acrylic acid)] synthesized via reversible addition‐fragmentation chain‐transfer polymerization. For the purpose of targeting effect, folic acid was grafted on the surface of Fe₃O₄‐NH₂ attached nanoparticles. The nanocarriers were characterized by transmission electron microscopy, Fourier transform infrared spectroscopy, vibrating sample magnetometer, and UV‐Vis spectral analysis. Therefore, a hydrophobic anti‐cancer drug, curcumin, gained water dispersity, and stable storage via encapsulating into and on the magnetically polymeric nanocarriers, and the release behaviors were studied in vitro, with and without high frequency magnetic field. Biocompatibility and cytotoxicity of inherent and curcumin‐loaded nanocarriers were investigated by MTT assay. Results displayed that our nanocarriers have no cytotoxicity while curcumin‐loaded nanocarriers offered significant death to MCF‐7, human breast camcer cells. Intracellular‐uptake experiments demonstrated tremendous uptake and the destroying effect to MCF‐7 cells, most of the cancer cells were killed and the surviving ones were surrounded by the curcumin‐loaded nanocarriers. According to the aforementioned characteristics, these magnetically polymeric nanocarriers will be able to apply as a potential device for practical therapy. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2706–2713     

Preparation and clinical application of immunomagnetic latex

Magnetic poly(methyl methacrylate) (PMMA)/poly(methyl methacrylate‐co‐methacrylic acid) [P(MMA–MAA)] composite polymer latices were synthesized by two‐stage soapless emulsion polymerization in the presence of magnetite (Fe₃O₄) ferrofluids. Different types and concentrations of fatty acids were reacted with the Fe₃O₄ particles, which were prepared by the coprecipitation of Fe(II) and Fe(III) salts to obtain stable Fe₃O₄ ferrofluids. The Fe₃O₄/polymer particles were monodisperse, and the composite polymer particle size was approximately 100 nm. The morphology of the magnetic composite polymer latex particles was a core–shell structure. The core was PMMA encapsulating Fe₃O₄ particles, and the shell was the P(MMA–MAA) copolymer. The carboxylic acid functional groups (COOH) of methacrylic acid (MAA) were mostly distributed on the surface of the composite polymer latex particles. Antibodies (anti‐human immunoglobulin G) were then chemically bound with COOH groups onto the surface of the magnetic core–shell composite latices through the medium of carbodiimide to form the antibody‐coated magnetic latices (magnetic immunolatices). The MAA shell composition of the composite latex could be adjusted to control the number of COOH groups and thus the number of antibody molecules on the magnetic composite latex particles. With a magnetic sorting device, the magnetic immunolatices derived from the magnetic PMMA/P(MMA–MAA) core–shell composite polymer latex performed well in cell‐separation experiments based on the antigen–antibody reaction. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1342–1356, 2005     

Carbon Electrodes Modified by Nanoscopic Iron(III) Oxides to Assemble Chemical Sensors for the Hydrogen Peroxide Amperometric Detection

In this study we show that nanoparticles of various ferric oxides (hematite, maghemite, amorphous Fe₂O₃, β‐Fe₂O₃ and ferrihydrite) incorporated into carbon paste exhibit electro‐catalytic properties towards hydrogen peroxide reduction. The modified paste electrode performances were evaluated and compared with those obtained with Prussian Blue‐modified carbon paste electrode, which represents an excellent chemical mediator towards the H₂O₂ redox reaction (as widely described in literature). The best catalytic activity was found for carbon paste modified by amorphous ferric oxide with 2–4 nm particle size, which was further tested for possible application as hydrogen peroxide sensor. At pH 7, the limit of detection was 2×10^?5 M H₂O₂ (S/N=3), the calibration curves were linear upto 8.5 mM H₂O₂ (R²=0.998), the measurement reproducibility (RSD=97%, n=4), the interelectrode reproducibility (RSD=16%, n_electrodes=5) and <3 s response time.     

UV‐Visible and Electrochemical Monitoring of Carbon Monoxide Release by Donor Complexes to Myoglobin Solutions and to Electrodes Modified with Films Containing Hemin

This study reports on the evaluation of the CO donating behavior of tricarbonyl dichloro ruthenium(II) dimer ([Ru(CO)₃Cl₂]₂) and 1,3‐dimethoxyphenyl tricarbonyl chromium (C₆H₃(MeO)₂Cr(CO)₃) complex by UV‐visible technique and electrochemical technique. The CO release was monitored by following the modifications of the UV‐visible features of MbFe(II) in phosphate buffer solution and the redox features of reduced Hemin, HmFe(II), confined at the surface of a vitreous carbon electrode. In the latter case, the interaction between the hemin‐modified electrode and the released CO was seen through the observation of an increase of the reduction current related to the Fe^III/Fe^II redox process of the immobilized porphyrin. While the ruthenium‐based complex, ([Ru(CO)₃Cl₂]₂), depended on the presence of Fe(II) species to release CO, it was found that the chromium‐based complex released spontaneously CO. This was facilitated by illuminating and/or simple stirring of the solution containing the complex.     

Surface modification of iron oxide nanoparticles by a phosphate‐based macromonomer and further encapsulation into submicrometer polystyrene particles by miniemulsion polymerization

A new strategy relying on the use of a phosphate‐based macromonomer (PAM200) to modify the surface of iron oxide nanoparticles was developed for the synthesis of submicrometer polystyrene (PS) magnetic particles. First, iron oxide nanoparticles were synthesized using the coprecipitation of ferrous and ferric salts in alkaline medium. Besides the classical oleic acid (OA)/octane‐based ferrofluid, styrene‐based ferrofluids were elaborated with either OA or PAM200 as the stabilizer. In all cases, maghemite (γ‐Fe₂O₃) was clearly identified, with nanoparticles rather spherical in shape but exhibiting broad particle size distribution (PSD). Both OA and PAM200 led to stable maghemite‐based ferrofluids showing superparamagnetic properties. Further use of these ferrofluids in styrene miniemulsion polymerization resulted in inhomogeneous distribution of maghemite among and inside the polymer particles with OA‐based ferrofluids, whereas PAM200/styrene‐based ferrofluids led to magnetic particles with homogeneous distribution of maghemite inside PS particles. Broad PSD and small nonmagnetic particles were however observed. The true mechanisms operating in these systems are still to elucidate, but this study validates PAM200 as an efficient compatibilizing agent between hydrophilic maghemite and hydrophobic PS. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 327–340, 2008     

Electrochemical Behavior of a Glassy Carbon Electrode Chemically Modified with Nickel Pentacyanonitrosylferrate in Presence of Sulfur Compounds

The glassy carbon electrode was modified with a nickel pentacyanonitrosylferrate film by electrodeposition of Ni and subsequent derivatization with NaPCNF. The film was characterized by XPS and electrochemical methods. Cyclic voltammetry of the NiPCNF onto the GC shows a redox couple (Fe^III/Fe^II) with E°′ of 538 mV (I_pa/I_pc around 1) and ΔE_p of 93 mV in 0.5 mol L^?1 KNO₃, with a diffusion‐controlled process. There was a decrease of anodic peak currents of the film in the presence of sulfide and 2‐propanethiol due to a precipitation reaction on the film surface by nucleophilic attack.     

An Electrochemical Impedance Immunosensor Based on Gold Nanoparticle‐Modified Electrodes for the Detection of HbA1c in Human Blood

A label‐free immunosensor for the detection of HbA1c was developed based on gold nanoparticle (AuNP)‐aryl diazonium salt modified glassy carbon (GC) electrode where transduction is achieved using electrochemical impedance spectroscopy (EIS). GC electrodes were first modified with 4‐aminophenyl (Ph‐NH₂) layers to which AuNPs were attached. Thereafter an oligo(ethylene glycol) (OEG‐COOH) species were covalently attached to the remaining free amine groups on the Ph‐NH₂ surface. The AuNP surfaces were further modified with Ph‐NH₂ followed by attachment of a glycosylated pentapeptide (GPP), an analogon to HbA1c. Exposure of this interface to anti‐HbA1c IgG resulted in a change in charge transfer resistance (R_ct) due to the anti‐HbA1c IgG selectively complexing to the surface bound GPP. To detect the amount of HbA1c, a competitive inhibition assay was employed where the surface bound GPP and HbA1c in solution compete for the anti‐HbA1c IgG antibodies. The higher the concentration of HbA1c, the less antibody binds to the sensing interface and the lower the change of R_ct. The response of the immunosensor is linear with the HbA1c% of total haemoglobin in the range of 0%–23.3%. This competitive inhibition assay can be used for the detection of HbA1c in human blood. The performance of the immunosensor for detection of HbA1c in human blood is comparable to the clinical laboratory method.     

A new polypyrrole/maghemite hybrid as a lithium insertion electrode

A new polypyrrole (PPY)/maghemite (γ-Fe₂O₃) hybrid was prepared by modification of the surface of maghemite nanoparticles using polymerization of pyrrole on the surface. Fourier Transform infrared (FTIR), X-ray diffraction and electron microscopy studies have proven that it was only a surface modification, keeping the core structure unchanged. Transmission electron micrographs have shown the presence of PPY on the intergrain surface between maghemite particles, leading to reduction of particle aggregation. The electrochemical lithium capacity has increased up to 270 mAh/g in the potential range between 1.3 and 4.3 V vs. Li at 8 mA/g. The modified samples showed an enhanced cyclability compared to the pristine one.     

Gold Nanoparticles Carrying Diatomic Molecules (O2 and CO) in Aqueous Solution

Gold nanoparticles (AuNPs) prepared by citrate reduction of aurochloric acid (HAuCl₄) were functionalized by tris(4‐sulfonatophenyl)porphinatoiron(III) (Fe^IIIP2) and poly(ethylene glycol) with thiolated arms (PEG‐SH). Fe^IIIP2 on the AuNP surface existed as its μ‐oxo dimer, which was reduced by Na₂S₂O₄ to yield monomeric Fe^IIP2. Fe^IIP2‐bearing AuNPs were further functionalized through inclusion of two sulfonatophenyl groups of Fe^IIP2 by a per‐O‐methylated β‐cyclodextrin dimer with a pyridine linker (Py3CD) to obtain AuNPs capable of carrying diatomic molecules in the body. The resulting AuNPs (hemoCD‐AuNPs) bound O₂ as well as CO in an aqueous solution. Although a noncolloidal 1:1 complex of 5,10,15,20‐tetrakis(4‐sulfonatophenyl)porphinatoiron(II) and Py3CD injected into the femoral vein of a rat was rapidly excreted in the urine, no excretion was observed with ferric hemoCD‐AuNPs, which were gradually accumulated in the spleen and liver of a rat. These results suggest that hemoCD‐AuNPs can be used as a carrier of diatomic molecules such as O₂ and CO in vivo.     

Novel Fe2O3@CeO2 Coreshell‐based Electrochemical Nanosensor for the Voltammetric Determination of Norepinephrine

A new selective carbon paste electrode (CPE), was applied as an electrochemical sensor for the detection of norepinephrine (NOE). The sensor was modified with 6‐amino‐4‐(3,4‐dihydroxyphenyl)‐3‐methyl‐1,4‐dihydropyrano[2,3‐c],pyrazole‐5‐carbonitrile (ADPC) assisted Fe₂O₃@CeO₂ coreshell nanoparticles (CNs) synthesized by simple method. To identify the redox properties of the modified electrode, and to examine its electrochemical properties, cyclic voltammetry (CV), chronoamperometry and differential pulse voltammetry (DPV) were conducted. Through electrochemical investigations, the coefficient of electron transfer between ADPC and the CNs/CPE (i. e. carbon paste electrode which was modified with CNs), the apparent charge transfer rate constant (k_s), and the diffusion coefficient (D) were calculated. The NOE oxidation occurred at the optimum pH of 7.0 and a potential that was about 235 mV less positive than that of the unmodified carbon paste electrode. The interaction between the two metals in the Fe₂O₃@CeO₂ coreshell led to an increase in the surface area and, consequently a sharp increase in the current. The differential pulse voltammogram of NOE showed two linear dynamic ranges an excellent detection limit (3σ) of 40 nM. In addition, NOE, AC and Trp were simultaneously determined at the modified electrode. Finally, NOE was quantitated in a number of real samples.     

Biomolecule‐Doped Organic/Inorganic Hybrid Nanocomposite Film for Label‐Free Electrochemical Immunoassay of α‐1‐Fetoprotein

A new electrochemical immunosensor for the detection of α‐1‐fetoprotien (AFP) was developed based on AFP antibody (anti‐AFP)‐functionalized organic/inorganic hybrid nanocomposite membrane. To fabricate such a hybrid composite membrane, 3,4,9,10‐perylenetetracarboxylic acid‐bound thionine molecules (PTCTH) were initially doped into titania colloids (TiO₂), and then gold nanoparticles and anti‐AFP were immobilized onto the composite film in turn. Comparison with the electrode fabricated only with thionine not 3,4,9,10‐perylenetetracarboxylic acid, the immunosensor with PTCTH exhibited high sensitivity and fast electron transfer. The presence of gold nanoparticles provided a good microenvironment for the immobilization of biomolecules, enhanced the surface coverage of protein, and improved the sensitivity of the immunosensor. The modified process was characterized by scanning electron microscope (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The surface topography of the membrane was investigated by scanning electron microscopy (SEM). Under optimal conditions, the proposed immunosensor exhibited a wide linear range from 2.5 to 200.0 ng/mL towards AFP with a detection limit of 0.5 ng/mL (S/N=3). The stability, reproducibility and precision of the immunosensor were acceptable. Comparison with the conventional enzyme‐linked immunosorbent assay (ELISA), the present method did not require more labeled procedures and washing steps. Significantly, the detection methodology provides a promising approach for other proteins or biosecurities.     

Polymer/Iron Oxide Nanoparticle Modified Glassy Carbon Electrodes for the Enhanced Detection of Epinephrine

Novel electrochemical sensors for epinephrine (EP) based on a glassy carbon electrode (GCE) modified with a redox polymer film and iron (III) oxide nanoparticles (Fe₂O₃NP) have been developed. Two redox polymers‐poly(brilliant cresyl blue) (PBCB) and poly(Nile blue) (PNB), and two different architectures‐polymer/Fe₂O₃/GCE and Fe₂O₃/polymer/GCE were investigated. The electrochemical oxidation of epinephrine at the modified electrodes was performed by differential pulse voltammetry (DPV), in pH 7 electrolyte, and the analytical parameters were determined. The results show enhanced performance, more sensitive responses and lower detection limits at the modified electrodes, compared to other electrochemical epinephrine sensors reported in the literature. The best voltammetric response with the lowest detection limit was obtained for the determination of epinephrine at PBCB/Fe₂O₃/GCE. The novel sensors are reusable, with good reproducibility and stability, and were successfully applied to the determination of epinephrine in commercial injectable adrenaline samples.     

Separation of chiral compounds using magnetic molecularly imprinted polymer nanoparticles as stationary phase by microchip capillary electrochromatography

In this work, a simple and rapid approach was developed for separation and detection of chiral compounds based on a magnetic molecularly imprinted polymer modified poly(dimethylsiloxane) (PDMS) microchip coupled with electrochemical detection. Molecularly imprinted polymers were prepared employing Fe₃O₄ nanoparticles (NPs) as the supporting substrate and norepinephrine as the functional monomer in the presence of template molecule in a weak alkaline solution. After extracting the embedded template molecules, Fe₃O₄@polynorepinephrine NPs (MIP–Fe₃O₄@PNE NPs) showed specific molecular recognition selectivity and high affinity towards the template molecule, which were then used as stationary phase of microchip capillary electrochromatography for chiral compounds separation. Mandelic acid and histidine enantiomers were used as model compounds to test the chiral stationary phase. By using R‐mandelic acid as the template molecule, mandelic acid enantiomer was effectively separated and detected on the MIP‐Fe₃O₄@PNE NPs modified PDMS microchip. Moreover, the successful separation of histidine enantiomers on the MIP–Fe₃O₄@PNE NPs modified microchip using L‐histidine as template molecule was also achieved.     

Development of nitroxide‐based theranostic compounds that act both as anti‐inflammatory drugs and brain redox imaging probes in MRI

Theranostic probes provide both therapeutic and diagnostic imaging capabilities in one molecule and show significant promise for use in magnetic resonance imaging (MRI) examinations. The present study describes for the first time the synthesis and utility of nitroxide‐based contrast agents exhibiting a nonsteroidal anti‐inflammatory drug effect. The target theranostic probes were prepared by connecting the carboxyl group of ibuprofen or ketoprofen to the hydroxyl group of 3‐hydroxymethyl‐2,2,5,5‐tetramethylprrolidine‐1‐oxyl by a condensation reaction in the presence of dicyclohexylcarbodiimide and 4‐dimethylaminopyridine in dichloromethane. MRI of mouse heads after administration of either synthesized theranostic probe indicated that the probes enter the brain by passing through the blood–brain barrier (BBB), resulting in T1 contrast enhancement in mouse brain. This enhancement persisted for the duration of the half‐life of about 40 min, which is longer than that obtained by most of pyrrolidine nitroxide molecules. The therapeutic capacities of these theranostic probes were examined using a lipopolysaccharide (LPS)‐induced brain inflammation model. The production of nitric oxide, an inflammation marker in septic mouse brain induced by LPS, was remarkably inhibited by the addition of either synthesized probe, indicating that they also act as anti‐inflammatory drugs. The present results indicate that nitroxide‐based theranostic probes act as both BBB‐permeable redox‐sensitive contrast agents and as an anti‐inflammatory drug in septic mouse brain. Copyright © 2016 John Wiley & Sons, Ltd.     

Anticancer Drug Modified GCFE,for the Study of Its In‐Vivo Interaction Mechanism

An anticancer drug (Adriamycin) modified Glassy Carbon Fiber Electrode (GCFE) has been prepared to study its interaction with ds‐DNA. The redox reaction of Adriamycin molecules at the chemically modified GCFE helps in understanding the in‐vivo mechanism of action of this anti cancer drug. The modified electrode has been fabricated by the adsorption of Adriamycin on GCFE surface. The results of Differential Pulse Voltammetric (DPV) analysis in acetate buffer of pH 4.5 ± 0.1, showed that the interaction between DNA guanine and adenine bases and electrode surface, is easily detected. A suitable mechanism for the oxidation and reduction of Adriamycin in‐situ intercalated in ds‐DNA immobilized on to the GCFE surface has been explained. The drug‐DNA complex formation at GCFE surface has also been studied. The prepared modified electrode is of utmost relevance because the mechanism of interaction of DNA‐Adriamycin at charged interfaces is parallel to the in‐vivo DNA‐Adriamycin complex reaction, where the nucleic acid is in close contact with charged phospholipid membranes and proteins. The interaction studies of Adriamycin at modified GCFE using DPV method help in understanding the DNA‐Adriamycin reaction mechanism.     

A Renewable Potentiometric Immunosensor Based on Fe3O4 Nanoparticles Immobilized Anti‐IgG

A renewable potentiometric immunosensor for detection of immunoglobulin G (IgG) has been developed by magnetic force attraction of Fe₃O₄ nanoparticles immobilized goat‐anti‐human IgG antibody. For preparing sensitive film of the sensor, cysteine was bonded on the nano‐Fe₃O₄ particles surface. The cysteine functionalized magnetic nanoparticles was attracted on a solid paraffin carbon paste electrode surface to covalently immobilize of anti‐immunoglobulin G (anti‐IgG) by employing a conventional glutaraldehyde‐crosslinking method. The immunosensor showed a specific response to human immunoglobulin G in the range of 0.1–1.2 ng/mL with a detection limit of 0.023 ng/mL. The immunosensor based on the magnetic nanoparticles was made easily by this method. It can be used expediently, renewed easily and low‐cost relatively. The renewable potentiometric immunosensor with better stability and higher sensitivity can be employed extensively in clinical diagnosis, monitoring of disease and environmental studies and etc.