Post‐Synthetic Reversible Incorporation of Organic Linkers into Porous Metal–Organic Frameworks through Single‐Crystal‐to‐Single‐Crystal Transformations and Modification of Gas‐Sorption Properties

The porous metal–organic framework (MOF) {[Zn₂(TCPBDA)(H₂O)₂]?30 DMF?6 H₂O}_n ( SNU‐30 ; DMF=N,N‐dimethylformamide) has been prepared by the solvothermal reaction of N,N,N′,N′‐tetrakis(4‐carboxyphenyl)biphenyl‐4,4′‐diamine (H₄TCPBDA) and Zn(NO₃)₂?6 H₂O in DMF/tBuOH. The post‐synthetic modification of SNU‐30 by the insertion of 3,6‐di(4‐pyridyl)‐1,2,4,5‐tetrazine (bpta) affords single‐crystalline {[Zn₂(TCPBDA)(bpta)]?23 DMF?4 H₂O}_n ( SNU‐31 SC ), in which channels are divided by the bpta linkers. Interestingly, unlike its pristine form, the bridging bpta ligand in the MOF is bent due to steric constraints. SNU‐31 can be also prepared through a one‐pot solvothermal synthesis from Zn^II, TCPBDA^4?, and bpta. The bpta linker can be liberated from this MOF by immersion in N,N‐diethylformamide (DEF) to afford the single‐crystalline SNU‐30 SC , which is structurally similar to SNU‐30 . This phenomenon of reversible insertion and removal of the bridging ligand while preserving the single crystallinity is unprecedented in MOFs. Desolvated solid SNU‐30′ adsorbs N₂, O₂, H₂, CO₂, and CH₄ gases, whereas desolvated SNU‐31′ exhibits selective adsorption of CO₂ over N₂, O₂, H₂, and CH₄, thus demonstrating that the gas adsorption properties of MOF can be modified by post‐synthetic insertion/removal of a bridging ligand.     

A CdII‐Based Metal‐Organic Framework with pcu Topology as Turn‐On Fluorescent Sensor for Al3+

A new metal‐organic framework (MOF) {[Cd₂(bbib)₂(ndc)₂]?2DMF}_n ( JXUST‐1 ) (bbib=1,3‐bis(benzimidazolyl)benzene, H₂ndc=1,4‐naphthalenedicarboxylic acid, DMF=N,N‐dimethylformamide) has been solvothermally synthesized and characterized by single‐crystal X‐ray diffraction, PXRD, TGA, IR and elemental analysis. JXUST‐1 exhibits a three‐dimensional 6‐connected pcu topology with a Schläfli symbol {4¹².6³} constructed by [Cd₂(CO₂)₃] secondary building units. Fluorescence studies show that this MOF can sensitively and selectively recognize Al³⁺ via a fluorescence enhancement effect, and the detection limit is 0.048 ppm. Furthermore, JXUST‐1 displays relatively good thermal and chemical stabilities as well as reusability. All these results suggest JXUST‐1 to be a highly selective and recyclable luminescent sensing material for the detection of Al³⁺.     

Construction of ZnII‐based rac‐Helical Chains Containing Semi‐rigid Dipolar Ligand 1,4‐Bis(benzimidazol‐1‐ylmethyl)benzene

A Zn^II compound based on the semi‐rigid dipolar ligand 1,4‐bis(benzimidazol‐1‐ylmethyl)benzene (L), {[Zn( L )₂Cl₂]·2DMF}_n ( 1 ) has been synthesized successfully under solvothermal conditions. X‐ray single crystal diffraction shows that the complex contains P‐helical and M‐helical chains with 2₁ screw axis but crystallizes as a racemate. Through π···π stacking interactions between two well‐overlapping benzimidazoleyl rings from two adjacent chains, the 3D racemic supramolecular network is assembled. Furthermore, the IR, TGA and luminescent properties are also investigated in this work.     

Adsorption behaviour of a CdII–triazole MOF for butan‐2‐one in a single‐crystal‐to‐single‐crystal (SCSC) fashion: the role of hydrogen bonding and C—H…π interactions

The adsorption behaviour of the Cd^II–MOF {[Cd(L)₂(ClO₄)₂]·H₂O ( 1 ), where L is 4‐amino‐3,5‐bis[3‐(pyridin‐4‐yl)phenyl]‐1,2,4‐triazole, for butan‐2‐one was investigated in a single‐crystal‐to‐single‐crystal (SCSC) fashion. A new host–guest system that encapsulated butan‐2‐one molecules, namely poly[[bis{μ₃‐4‐amino‐3,5‐bis[3‐(pyridin‐4‐yl)phenyl]‐1,2,4‐triazole}cadmium(II)] bis(perchlorate) butanone sesquisolvate], {[Cd(C₂₄H₁₈N₆)₂](ClO₄)₂·1.5C₄H₈O}_n, denoted C₄H₈O@Cd‐MOF ( 2 ), was obtained via an SCSC transformation. MOF 2 crystallizes in the tetragonal space group P4₃2₁2. The specific binding sites for butan‐2‐one in the host were determined by single‐crystal X‐ray diffraction studies. N—H…O and C—H…O hydrogen‐bonding interactions and C—H…π interactions between the framework, ClO₄^? anions and guest molecules co‐operatively bind 1.5 butan‐2‐one molecules within the channels. The adsorption behaviour was further evidenced by ¹H NMR, IR, TGA and powder X‐ray diffraction experiments, which are consistent with the single‐crystal X‐ray analysis. A ¹H NMR experiment demonstrates that the supramolecular interactions between the framework, ClO₄^? anions and guest molecules in MOF 2 lead to a high butan‐2‐one uptake in the channel.     

Single‐Crystal to Single‐Crystal Linker Substitution,Linker Place Exchange,and Transmetalation Reactions in Interpenetrated Pillared–Bilayer Zinc(II) Metal–Organic Frameworks

A twofold interpenetrated pillared–bilayer framework, {[Zn₃( L )₂( L₂ )(DMF)] ? (18DMF)(6H₂O)}_n ( 1 ), has been synthesized from the ligands tris(4′‐carboxybiphenyl)amine ( H₃L ) and 1,2‐bis(4‐pyridyl)ethylene ( L₂ ). The structure contains [Zn₃(COO)₆] secondary building units (SBUs), in which three Zn^II ions are almost linear with carboxylate bridging. This framework undergoes reversible pillar linker substitution reactions at the terminal Zn^II centers with three different dipyridyl linkers of different lengths to afford three daughter frameworks, 2 – 4 . Frameworks 2 – 4 are interconvertible through reversible linker substitution reactions. Also, competitive linker‐exchange experiments show preferential incorporation of linker L₃ in the parent framework 1 . The larger linker L₅ does not undergo such substitution reactions and framework 5 , which contains this linker, can be synthesized solvothermally as a twofold interpenetrated structure. Interestingly, when framework 5 is dipped in a solution of L₃ in DMF, linker substitution takes place as before, but linker L₅ now moves and diagonally binds two Zn^II centers to afford 6 as a nonpenetrated single framework. This linker place exchange reaction is unprecedented. All of these reactions take place in a single‐crystal to single‐crystal (SC‐SC) manner, and have been observed directly through X‐ray crystallography. In addition, each 3D framework undergoes complete copper(II) transmetalation.     

Structural analysis of interpenetrated methyl‐modified MOF‐5 and its gas‐adsorption properties

The first example of an interpenetrated methyl‐modified MOF‐5 with the formula Zn₄O(DMBDC)₃(DMF)₂, where DMBDC^2? is 2,5‐dimethylbenzene‐1,4‐dicarboxylate and DMF is N,N‐dimethylformamide (henceforth denoted as Me₂MOF‐5‐int ), namely, poly[tris(μ₄‐2,5‐dimethylbenzene‐1,4‐dicarboxylato)bis(N,N‐dimethylformamide)‐μ₄‐oxido‐tetrazinc(II)], [Zn₄(C₁₀H₈O₄)₃O(C₃H₇NO)₂]_n, has been obtained from a solvothermal synthesis of 2,5‐dimethylbenzene‐1,4‐dicarboxylic acid and Zn(NO₃)₂·6H₂O in DMF. A systematic study revealed that the choice of solvent is of critical importance for the synthesis of phase‐pure Me₂MOF‐5‐int , which was thoroughly characterized by single‐crystal and powder X‐ray diffraction (PXRD), as well as by gas‐adsorption analyses. The Brunauer–Emmett–Teller surface area of Me₂MOF‐5‐int (660 m² g^?1), determined by N₂ adsorption, is much lower than that of nonpenetrated Me₂MOF‐5 (2420 m² g^?1). However, Me₂MOF‐5‐int displays an H₂ uptake capacity of 1.26 wt% at 77 K and 1.0 bar, which is comparable to that of non‐interpenetrated Me₂MOF‐5 (1.51 wt%).     

Selective Sensing of Fe3+ and Al3+ Ions and Detection of 2,4,6‐Trinitrophenol by a Water‐Stable Terbium‐Based Metal–Organic Framework

A water‐stable luminescent terbium‐based metal–organic framework (MOF), {[Tb(L₁)_1.5(H₂O)] ? 3 H₂O}_n (Tb‐MOF), with rod‐shaped secondary building units (SBUs) and honeycomb‐type tubular channels has been synthesized and structurally characterized by single‐crystal X‐ray diffraction. The high green emission intensity and the microporous nature of the Tb‐MOF indicate that it can potentially be used as a luminescent sensor. In this work, we show that Tb‐MOF can selectively sense Fe³⁺ and Al³⁺ ions from mixed metal ions in water through different detection mechanisms. In addition, it also exhibits high sensitivity for 2,4,6‐trinitrophenol (TNP) in the presence of other nitro aromatic compounds in aqueous solution by luminescence quenching experiments.     

Two new NiII and ZnII metal–organic frameworks of glutarate and 1,4‐bis[(2‐methyl‐1H‐imidazol‐1‐yl)methyl]benzene ligands: syntheses,structures and luminescence sensing properties

Two new metal–organic frameworks (MOFs), namely, three‐dimensional poly[diaquabis{μ₂‐1,4‐bis[(2‐methyl‐1H‐imidazol‐1‐yl)methyl]benzene}bis(μ₂‐glutarato)dinickel(II)] monohydrate], {[Ni₂(C₅H₆O₄)₂(C₁₆H₁₈N₄)₂(H₂O)₂]·H₂O}_n or {[Ni₂(Glu)₂(1,4‐mbix)₂(H₂O)₂]·H₂O}_n, ( I ), and two‐dimensional poly[[{μ₂‐1,4‐bis[(2‐methyl‐1H‐imidazol‐1‐yl)methyl]benzene}(μ₂‐glutarato)zinc(II)] tetrahydrate], {[Zn(C₅H₆O₄)(C₁₆H₁₈N₄)]·4H₂O}_n or {[Zn(Glu)(1,4‐mbix)]·4H₂O}_n ( II ), have been synthesized hydrothermally using glutarate (Glu^2?) mixed with 1,4‐bis[(2‐methyl‐1H‐imidazol‐1‐yl)methyl]benzene (1,4‐mbix), and characterized by single‐crystal X‐ray diffraction, IR and UV–Vis spectroscopy, powder X‐ray diffraction, and thermogravimetric and photoluminescence analyses. Ni^II MOF ( I ) shows a 4‐connected 3D framework with point symbol 6⁶, but is not a typical dia network. Zn^II MOF ( II ) displays a two‐dimensional 4⁴‐ sql network with one‐dimensional water chains penetrating the grids along the c direction. The solid‐state photoluminescence analysis of ( II ) was performed at room temperature and the MOF exhibits highly selective sensing toward Fe³⁺ and Cr₂O₇^2? ions in aqueous solution.     

Turn‐On Fluorescence and Unprecedented Encapsulation of Large Aromatic Molecules within a Manganese(II)–Triazole Metal–Organic Confined Space

For the purpose of investigating the coordination behavior of sterically congested alkenes and exploring the possibility of cofacial complexation in the polycyclic aromatic system for the formation of extended polymeric networks, a new tetradentate ligand, 1,1,2,2‐tetrakis[4‐(1H‐1,2,4‐triazol‐1‐yl)phenyl]ethylene (TTPE), has been designed and synthesized. By using TTPE as a building block with regard to the self‐assembly with MnCl₂ ? 4 H₂O, a novel two‐dimensional coordination framework {[Mn(TTPE)Cl₂] ? 4 CHCl₃}_n ( 1 ) can be isolated. Anion‐exchange and organic‐group‐functionalized aromatic guest TTPE‐loaded host–guest complex experimental results indicate that coordinated Cl^? anions in the 2D framework of 1 can be completely replaced with dissociative ClO₄^? groups in an irreversible single‐crystal‐to‐single‐crystal transformation fashion, as evidenced by the anion‐exchange products of {[Mn(TTPE)(H₂O)₂](ClO₄)₂ ? 0.5 TTPE ? 5.25 H₂O}_n ( 2 ). Interestingly, TTPE, acting as an organic template, was encapsulated in the confined space of the 2D grid of 2 . To the best of our knowledge, such large organic molecules encapsulated in the reactive organic‐group‐functionalized aromatic‐guest‐loaded host–guest complex are unprecedented up to now. Luminescence measurements illustrate that 1 and 2 represent novel examples of sensing materials based on triazole derivatives. Further, 2 has been demonstrated by tuning the fluorescence response of porous metal–organic frameworks as a function of adsorbed small analytes.     

Tetrazine Chromophore‐Based Metal–Organic Frameworks with Unusual Configurations: Synthetic,Structural, Theoretical,Fluorescent, and Nonlinear Optical Studies

Three unusual three‐dimensional (3D) tetrazine chromophore‐based metal–organic frameworks (MOFs) {(Et₄N)[WS₄Cu₃(CN)₂(4,4′‐pytz)_0.5]}_n ( 1 ), {[MoS₄Cu₄(CN)₂(4,4′‐pytz)₂] ? CH₂Cl₂}_n ( 2 ), and {[WS₄Cu₃(4,4′‐pytz)₃] ? [N(CN)₂]}_n ( 3 ; 4,4′‐pytz=3,6‐bis(4‐pyridyl)tetrazine) have been synthesized and characterized by using FTIR and UV/Vis spectroscopy, elemental analysis, powder X‐ray diffraction, gel permeation chromatography, steady‐state fluorescence, and thermogravimetric analysis; their identities were confirmed by single‐crystal X‐ray diffraction studies. MOF 1 possesses the first five‐connected M/S/Cu (M=Mo, W) framework with an unusual 3D (4⁴?6⁶) topology constructed from T‐shaped [WS₄Cu₃]⁺ clusters as nodes and single CN^?/4,4′‐pytz bridges as linkers. MOF 2 features a novel 3D MOF structure with (4²⁰?6⁸) topology, in which the bridging 4,4′‐pytz ligands exhibit unique distorted arch structures. MOF 3 displays the first 3D MOF structure based on flywheel‐shaped [WS₄Cu₃]⁺ clusters with a non‐interpenetrating honeycomb‐like framework and a heavily distorted “ACS” topology. Steady‐state fluorescence studies of 1 – 3 reveal significant fluorescence emissions. The nonlinear optical (NLO) properties of 1 – 3 were investigated by using a Z‐scan technique with 5 ns pulses at λ=532 nm. The Z‐scan experimental results show that the π‐delocalizable tetrazine‐based 4,4′‐pytz ligands contribute to the strong third‐order NLO properties exhibited by 1 – 3 . Time‐dependent density functional theory studies afforded insight into the electronic transitions and spectral characterization of these functionalized NLO molecular materials.     

Facile Synthesis of Hydroxy‐Modified MOF‐5 for Improving the Adsorption Capacity of Hydrogen by Lithium Doping

A facile synthesis of partially hydroxy‐modified MOF‐5 and its improved H₂‐adsorption capacity by lithium doping are reported. The reaction of Zn(NO₃)₂ ? 6 H₂O with a mixture of terephthalic acid (H₂BDC) and 2‐hydroxyterephthalic acid (H₂BDC‐OH) in DMF gave hydroxy‐modified MOF‐5 (MOF‐5‐OH‐x), in which the molar fraction (x) of BDC‐OH^2? was up to 0.54 of the whole ligand. The MOF‐5‐OH‐x frameworks had high BET surface areas (about 3300 m² g^?1), which were comparable to that of MOF‐5. We suggest that the MOF‐5‐OH‐x frameworks are formed by the secondary growth of BDC^2?‐rich MOF‐5 seed crystals, which are nucleated during the early stage of the reaction. Subsequent Li doping into MOF‐5‐OH‐x results in increased H₂ uptake at 77 K and 0.1 MPa from 1.23 to 1.39 wt. % and an increased isosteric heat of H₂ adsorption from 5.1–4.2 kJ mol^?1 to 5.5–4.4 kJ mol^?1.     

Cadmium(II)–Triazole Framework as a Luminescent Probe for Ca2+ and Cyano Complexes

A bidentate ligand, 1‐{4‐[4‐(1H‐1,2,4‐triazol‐1‐yl)phenoxy]phenyl}‐1H‐1,2,4‐triazole (TPPT), has been designed and synthesized. By using TPPT as a building block for self‐assembly with Cd(NO₃)₂ ? 4 H₂O and CdCl₂ ? 10.5 H₂O, novel 1D double‐chain {[Cd(TPPT)(NO₃)₂] ? 3 H₂O}_n ( 1 ) and 2D (4,4) layer [Cd(TPPT)Cl₂(H₂O)]_n ( 2 ) have been constructed. When 1 was employed as a precursor and exposed to DMF or N,N′‐dimethylacetamide (DMAC), the crystals of 1 dissolved and reassembled into two types of brown block‐shaped crystals of 1D double chains: {[Cd(TPPT)₂(NO₃)₂] ? DMF}_n ( 1 a ) and {[Cd(TPPT)₂(NO₃)₂] ? DMAC}_n ( 1 b ). The anion‐exchange reactions of complex 2 have also been investigated. After gently stirring crystals of 2 in CHCl₃/C₂H₅OH/H₂O containing NaBr, NaI ? 2 H₂O, or NaOAc ? 3 H₂O, the crystals retained their crystalline appearances. A remarkable single crystal to single crystal transformation was observed and 1D double chains of {[Cd(TPPT)Br₂] ? C₂H₅OH}_n ( 2 a ) and {[Cd(TPPT)₂I₂] ? CHCl₃}_n ( 2 b ), and 1D single chains of [Cd(TPPT)(H₂O)₂(CH₃COO)₂]_n ( 2 c ), can be obtained. Luminescent properties indicate that 1 shows excellent selectivity for Ca²⁺ and cyano complexes. To the best of our knowledge, this is the first example of a luminescent probe for Ca²⁺ based on triazole derivatives.     

Solvent‐Vapor‐Induced Reversible Single‐Crystal‐to‐Single‐Crystal Transformation of a Triphosphaazatriangulene‐Based Metal–Organic Framework

A triphosphaazatriangulene (H₃L) was synthesized through an intramolecular triple phospha‐Friedel–Crafts reaction. The H₃L triangulene contains three phosphinate groups and an extended π‐conjugated framework, which enables the stimuli‐responsive reversible transformation of [Cu(HL)(DMSO)?(MeOH)]_n, a 3D‐MOF that exhibits reversible sorption characteristics, into (H₃L?0.5 [Cu₂(OH)₄?6 H₂O] ?4 H₂O), a 1D‐columnar assembled proton‐conducting material. The hydrophilic nature of the latter resulted in a proton conductivity of 5.5×10^?3 S cm^?1 at 95 % relative humidity and 60 °C.     

Syntheses,Structures, and Luminescence of Metal(II) Coordination Polymers based on Flexible 1,1′‐(1,4‐Butanediyl)bis(imidazole) and Tetrachlorobenzene‐1,4‐dicarboxylate Ligands

The coordination polymers, {[Co(bbim)₂(H₂O)₂](tcbdc) · 2H₂O}_n ( 1 ), {[Ni(tcbdc)(bbim)(H₂O)₂] · 2DMF}_n ( 2 ), and {[Cu₂(tcbdc)₂(bbim)₄] · 4H₂O}_n ( 3 ) [bbim = 1,1′‐(1,4‐butanediyl)bis(imidazole) and tcbdc^2– = tetrachlorobenzene‐1,4‐dicarboxylate] were synthesized and characterized by IR spectroscopy, elemental analysis, thermogravimetric analysis, luminescence, and single‐crystal X‐ray diffraction analysis. Complex 1 has a double‐stranded chain structure through doubly bridged [Co(bbim)₂] units. Complex 2 exhibits two‐dimensional square grid, whereas complex 3 has a three‐dimensional porous network structure with an unprecedented 4⁴ · 6¹¹ topological structure through interpenetrating square grid. The water molecules in complex 3 occupy the vacancy through three kinds of hydrogen bond interactions. Upon excitation at 370 nm, complexes 1 – 3 present solid‐state luminescence at room temperature.     

Assembly of Three 2D Metal‐Organic Frameworks (MOFs) Derived from Flexible Ligands, 1,4‐bis(3‐pyridyl)‐2,3‐diaza‐1,3‐butadiene (3‐bpd) and/or 1,2‐bis(4‐pyridyl)ethane (dpe)

Three coordination polymers, {[Cd(3‐bpd)₂(NCS)₂]×C₂H₅OH}_n ( 1 ), {[Cd(3‐bpd)(dpe)(NO₃)₂]×(3‐bpd)}₂ ( 2 ), {[Cd(dpe)₂(NCS)₂]×3‐bpd×2H₂O}_n ( 3 ) (3‐bpd = 1,4‐bis(3‐pyridyl)‐2,3‐diaza‐1,3‐butadiene; dpe = 1,2‐bis(4‐pyridyl)ethane), were prepared and structurally characterized by a single‐crystal X‐ray diffraction method. In compound 1 , each Cd(II) ion is six‐coordinate bonded to six nitrogen atoms from four 3‐bpd and two NCS^? ligands. The 3‐bpd acts as a bridging ligand connecting the Cd(II) ion to generate a 2D layered metal‐organic framework (MOF) by using a rhomboidal‐grid as the basic building units with the 4⁴ topology. In compound 2 , the Cd(II) ion is also six‐coordinate bonded to four nitrogen atoms of two 3‐bpd, two dpe and two oxygen atoms of two NO₃^? ligands. The 3‐bpd and dpe ligands both adopt bis‐monodentate coordination mode connecting the Cd(II) ions to generate a 2D layered MOF by using a rectangle‐grid as the basic building units with the 4⁴ topology. In compound 3 , two crystallographically independent Cd(II) ions are both coordinated by four nitrogen atoms of dpe ligands in the basal plane and two nitrogen atom of NCS^? in the axial sites. The dpe acts as a bridging ligand to connect the Cd(II) ions forming a 2D interpenetrating MOFs by using a square‐grid as the basic unit with the 4⁴ topology. All of their 2D layered MOFs in compounds 1 ‐ 3 are then arranged in a parallel non‐interpenetrating ABAB—packing manner in 1 and 2 , and mutually interpenetrating manner in 3 , respectively, to extend their 3D supramolecular architectures with their 1D pores intercalated with solvent (ethanol in 1 or H₂O in 3 ) or free 3‐bpd molecules in 2 and 3 , respectively. The photoluminescence measurements of 1 ‐ 3 reveal that the emission is tentatively assigned to originate from π‐π* transition for 1 and 2 and probably due to ligand‐center luminescence for compounds 3 , respectively.     

Redox‐Active Metal–Organic Frameworks: Highly Stable Charge‐Separated States through Strut/Guest‐to‐Strut Electron Transfer

Molecular organization of donor and acceptor chromophores in self‐assembled materials is of paramount interest in the field of photovoltaics or mimicry of natural light‐harvesting systems. With this in mind, a redox‐active porous interpenetrated metal–organic framework (MOF), {[Cd(bpdc)(bpNDI)] ? 4.5 H₂O ? DMF}_n ( 1 ) has been constructed from a mixed chromophoric system. The μ‐oxo‐bridged secondary building unit, {Cd₂(μ‐OCO)₂}, guides the parallel alignment of bpNDI (N,N′‐di(4‐pyridyl)‐1,4,5,8‐naphthalenediimide) acceptor linkers, which are tethered with bpdc (bpdcH₂=4,4′‐biphenyldicarboxylic acid) linkers of another entangled net in the framework, resulting in photochromic behaviour through inter‐net electron transfer. Encapsulation of electron‐donating aromatic molecules in the electron‐deficient channels of 1 leads to a perfect donor–acceptor co‐facial organization, resulting in long‐lived charge‐separated states of bpNDI. Furthermore, 1 and guest encapsulated species are characterised through electrochemical studies for understanding of their redox properties.     

Manipulation of Molecular and Supramolecular Structure in Cobalt(II) Complexes with Tetrachloroterephthalate through the Influence of Different Solvents

The reactions of cobalt acetates with tetrachloroterephthalic acid (H₂BDC‐Cl₄) in different solvents gave two polymeric and one mononuclear Co^II complexes. X‐ray single‐crystal structural determination revealed that the ligand BDC‐Cl₄ displays a reliable bridging tecton to construct diverse supramolecular architectures through coordinative bonds or secondary hydrogen‐bonding interactions. The complexes [Co(BDC‐Cl₄)(DMF)₂(EtOH)₂]_n ( 1 ) and {[Co(BDC‐Cl₄)(DMF)₂(MeOH)₂] · 2DMF}_n ( 2 ) demonstrate a one‐dimensional (1D) coordination motif with infinite Co^II‐tetrachloroterephthalate chains, which are tuned by different binding solvent systems of DMF/ethanol (EtOH) and DMF/methanol (MeOH). [Co(DMF)₂(H₂O)₄] · (BDC‐Cl₄) ( 3 ) represents a two‐dimensional (2D) metallosupramolecular network by hydrogen‐bonded bridging between the aqua ligand of the mononuclear complex with the uncoordinated BDC‐Cl₄ solvates. The spectroscopic, thermal, and fluorescent properties of 1 – 3 were also investigated.     

Three Novel 1‐H‐Benzimidazole‐5‐Carboxylate‐Based Nickel(II)/Cobalt(II) Coordination Polymers: Synthesis,Crystal Structures,Luminescent, and Magnetic Properties

Three 1H‐benzimidazole‐5‐carboxylate (Hbic^–)‐based coordination polymers, {[Ni(H₂O)(Hbic)₂] · 2H₂O}_n ( 1 ), {[Ni(H₂O)₂(Hbic)₂] · 3H₂O}_n ( 2 ), and {[Co₂(H₂O)₄(Hbic)₄] · 4DMF · 3H₂O}_n ( 3 ) were obtained by reactions of the ligand H₂bic and Ni^II or Co^II salts in the presence of different structure directing molecules. They were structurally characterized by single‐crystal X‐ray diffraction, IR spectra, elemental analysis, thermal stability, luminescent, and magnetic measurements. Structural analysis suggests that the three polymers exhibit a 2D (4, 4) layer for 1 and 1D linear double chains for both 2 and 3 due to the variable binding modes and the specific spatial orientation of the Hbic^– ligand towards the different paramagnetic metal ions, which were further aggregated into different 3D supramolecular architectures by popular hydrogen‐bonding interactions. Weak and comparable antiferromagnetic couplings mediating by Hbic^– bridge are observed between the neighboring spin carriers for 2 and 3 , respectively. Additionally, complexes 1 – 3 also display different luminescence emissions at room temperature due to the ligand‐to‐metal charge transfer.     

Encapsulation of LnIII Ions/Dyes within a Microporous Anionic MOF by Post‐synthetic Ionic Exchange Serving as a LnIII Ion Probe and Two‐Color Luminescent Sensors

A new anionic framework {[Me₂NH₂]_0.125[In_0.125(H₂L)_0.25] ? xDMF}_n ( 1 ) with one‐dimensional (1D) channels along the c axis of about 13.06×13.06 Ų, was solvothermally synthesized and well characterized. Post‐synthetic cation exchange of 1 with Eu³⁺, Tb³⁺, Dy³⁺, Sm³⁺ afforded lanthanide(III)‐loaded materials, Ln³⁺@ 1 , with different luminescent behavior, indicating that compound 1 could be used as a potential luminescent probe toward different lanthanide(III) ions. Additionally, compound 1 exhibits selective adsorption ability toward cationic dyes. Moreover, the RhB@ 1 realized the probing of different organic solvent molecules by tuning the energy transfer efficiency between two different emissions, especially for sensing DMF. This work highlights the practical application of luminescent guest@MOFs as sensors, and it paves the way toward other one/multi‐color luminescent host–guest systems by rational selection of MOF hosts and guest chromophores with suitable emissive colors and energy levels.     

Versatile Tailoring of Paddle‐Wheel ZnII Metal–Organic Frameworks through Single‐Crystal‐to‐Single‐Crystal Transformations

A new tetracarboxylate ligand having short and long arms formed 2D layer Zn^II coordination polymer 1 with paddle‐wheel secondary building units under solvothermal conditions. The framework undergoes solvent‐specific single crystal‐to‐single crystal (SC‐SC) transmetalation to produce 1_Cu . With a sterically encumbered dipyridyl linker, the same ligand forms non‐interpenetrated, 3D, pillared‐layer Zn^II metal–organic framework (MOF) 2 , which takes part in SC‐SC linker‐exchange reactions to produce three daughter frameworks. The parent MOF 2 shows preferential incorporation of the longest linker in competitive linker‐exchange experiments. All the 3D MOFs undergo complete SC‐SC transmetalation with Cu^II, whereby metal exchange in different solvents and monitoring of X‐ray structures revealed that bulky solvated metal ions lead to ordering of the shortest linker in the framework, which confirms that the solvated metal ions enter through the pores along the linker axis.