Blue Electrogenerated Chemiluminescence from Water‐Soluble Iridium Complexes Containing Sulfonated Phenylpyridine or Tetraethylene Glycol Derivatized Triazolylpyridine Ligands

Incorporating phenylpyridine‐ and triazolylpyridine‐based ligands decorated with methylsulfonate or tetraethylene glycol (TEG) groups, a series of iridium(III) complexes has been created for green and blue electrogenerated chemiluminescence under analytically useful aqueous conditions, with tri‐n‐propylamine as a coreactant. The relative electrochemiluminescence (ECL) intensities of the complexes were dependent on the sensitivity of the photodetector over the wavelength range and the pulse time of the applied electrochemical potential. In terms of the integrated area of corrected ECL spectra, with a pulse time of 0.5 s, the intensities of the Ir^III complexes were between 18 and 102 % that of [Ru(bpy)₃]²⁺ (bpy=2,2′‐bipyridine). However, when the intensities were measured with a typical bialkali photomultiplier tube, the signal of the most effective blue emitter, [Ir(df‐ppy)₂(pt‐TEG)]⁺ (df‐ppy=2‐(2,4‐difluorophenyl)pyridine anion, pt‐TEG=1‐(2‐(2‐(2‐(2‐hydroxyethoxy)ethoxy)ethoxy)ethyl)‐4‐(2‐pyridyl)‐1,2,3‐triazole), was over 1200 % that of the orange–red emitter [Ru(bpy)₃]²⁺. A combined experimental and theoretical investigation of the electrochemical and spectroscopic properties of the Ir^III complexes indicated that the greater intensity from [Ir(df‐ppy)₂(pt‐TEG)]⁺ relative to those of the other Ir^III complexes resulted from a combination of many factors, rather than being significantly favored in one area.     

Greenish‐yellow‐, yellow‐, and orange‐light‐emitting iridium(III) polypyridyl complexes with poly(ε‐caprolactone)–bipyridine macroligands

A set of novel greenish‐yellow‐, yellow‐, and orange‐light‐emitting polymeric iridium(III) complexes were synthesized with the bridge‐splitting method. The respective dimeric precursor complexes, [Ir(ppy)₂‐μ‐Cl]₂ (ppy = 2‐phenylpyridine) and [Ir(ppy? CHO)₂‐μ‐Cl]₂ [ppy? CHO = 4‐(2‐pyridyl)benzaldehyde], were coordinated to 2,2′‐bipyridine carrying poly(ε‐caprolactone) tails. The resulting emissive polymers were characterized with one‐dimensional (¹H) and two‐dimensional (¹H? ¹H correlation spectroscopy) nuclear magnetic resonance and infrared spectroscopy, gel permeation chromatography, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and the successful coordination of the iridium(III) centers to the 2,2′‐bipyridine macroligand was revealed. The thermal behavior was studied with differential scanning calorimetry and correlated with atomic force microscopy. Furthermore, the quantitative coordination was verified by both the photophysical and electrochemical properties of the mononuclear iridium(III) compounds. The photoluminescence spectra showed strong emissions at 535 and 570 nm. The color shifts depended on the substituents of the cyclometallating ligands. Cyclic voltammetry gave oxidation potentials of 1.23 V and 1.46 V. Upon the excitation of the films at 365 nm, yellow light was observed, and this could allow potential applications in light‐emitting devices. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2765–2776, 2005     

室温磷光材料二(2-苯基吡啶)(2-(2-吡啶)苯并咪唑)合铱(III)的合成及光电特性

以2-苯基吡啶(ppy)为主配体, 2-(2-吡啶)苯并咪唑(pybiH)为辅助配体合成了一种室温蓝绿色磷光发射材料二(2-苯基吡啶)( 2-(2-吡啶)苯并咪唑)合铱(III) ((ppy)₂Ir(pybi)), 通过傅里叶变换红外(FTIR)光谱、核磁共振氢谱(1H NMR)、质谱(MS)、元素分析对其结构进行了表征. 利用紫外-可见吸收光谱、荧光激发和发射光谱、循环伏安曲线, 结合含时密度泛函理论(TD-DFT)模拟计算研究了(ppy)₂Ir(pybi)的光物理特性及能级结构, 并研究了其电致发光性能. (ppy)₂Ir(pybi)的紫外吸收峰分别位于250, 295, 346和442 nm, 与理论模拟计算吻合得很好;(ppy)₂Ir(pybi)为蓝绿光发射, 发光峰分别位于495 和518 nm; (ppy)₂Ir(pybi) 的最高占据轨道(HOMO)和最低空轨道(LUMO)能级分别为-6.11和-3.43 eV, 光学带隙为2.68 eV; 以(ppy)₂Ir(pybi)为掺杂剂, 4,4'-N,N'-二咔唑基联苯(CBP)为主体材料, 制备电致磷光器件, 电致发射峰位于508 nm, 最大亮度为8451 cd·m^-2, 最大电流效率为17.6 cd·A^-1. 这些研究为(ppy)₂Ir(pybi)在有机电致发光领域的应用提供实验依据.     

Synthesis and characterization of phosphorescent cyclometalated iridium complexes containing 2,5‐diphenylpyridine based ligands

A series of phosphorescent cyclometalated iridium complexes with 2,5‐diphenylpyridine‐based ligands has been synthesized and characterized to investigate the effect of the simple ligand modification on photophysics, thermostability and electrochemistry. The complexes have the general structure (C^∧N)₂Ir(acac), where C^∧N is a monoanionic cyclometalating ligand [e.g. 2,5‐diphenylpyridyl (dppy), 2,5‐di(4‐methoxyphenyl)pyridyl (dmoppy), 2,5‐di(4‐ethoxyphenyl)pyridyl (deoppy) and 2,5‐di(4‐ethylphenyl)pyridyl (deppy)]. The absorption, emission, cyclic voltammetry and thermostability of the complexes were systematically investigated. The (dppy)₂Ir(acac) has been characterized using X‐ray crystallography. Calculation on the electronic ground state of (dppy)₂Ir(acac) was carried out using B3LYP density functional theory. The highest occupied molecular orbital (HOMO) level is a mixture of Ir and ligand orbitals, while the lowest occupied molecular orbital (LUMO) is predominantly dppy ligand‐based. Electrochemical studies showed the oxidation potentials of (dmoppy)₂Ir(acac), (deoppy)₂Ir(acac), (deppy)₂Ir(acac) were smaller than that of (ppy)₂Ir(acac), while the oxidation potential of (dppy)₂Ir(acac) was larger relative to (ppy)₂Ir(acac). The 10% weight reduction temperatures of these complexes were above that of (ppy)₂Ir(acac). All complexes exhibited intense green photoluminescence, which has been attributed to MLCT triplet emission. The maximum emission wavelengths in CH₂Cl₂ at room temperature were in the range 531–544 nm, which is more red‐shifted than that of (ppy)₂Ir(acac). Copyright © 2005 John Wiley & Sons, Ltd.     

An Insight of the Results Provided by Color‐Tuning Studies Made on Ir(III) Complexes: A pi‐Neutral CF3 Group Viewed by Adjusting Energies of pi‐type Molecular Orbitals

The pi‐nature of a CF₃ group can be understood through analysis of its bond orbitals (BOs) mixed into the pi‐type molecular orbitals of CF₃‐substituted Ir(ppy)₂MDPA⁺ complexes (ppy=2‐phenyl‐pyridine and MDPA=methylated 2,2′‐dipyridyl amine). It has been found that, through this natural bond orbital analysis, the parent’s molecular orbitals (MOs) can be stabilized by χρ^*_CF BO via negative hyperconjugation and, simultaneously, destabilized by electron lp(F) BO. Since these two competing pi‐effects are virtually counterbalanced as indicated by the vanishing values of crystal orbital overlap populations, the chemical substitution strategy originated from lowering of HOMO by using this electron‐withdrawing CF₃ group has been found effective in color‐tuning to blue region. Based on reduced shielding effect due to de‐ creased χρ‐electron density, the reported position dependent CF₃‐substitution effects on pi‐type MOs can also be understood through HOMO/LUMO wavefunction analysis.     

Charge‐Neutral Amidinate‐Containing Iridium Complexes Capable of Efficient Photocatalytic Water Reduction

Two new charge‐neutral iridium complexes, [Ir(tfm‐ppy)₂(N,N′‐diisopropyl‐benzamidinate)] ( 1 ) and [Ir(tfm‐ppy)₂(N,N′‐diisopropyl‐4‐diethylamino‐3,5‐dimethyl‐benzamidinate)] ( 2 ) (tfm‐ppy=4‐trifluoromethyl‐2‐phenylpyridine) containing an amidinate ligand and two phenylpyridine ligands were designed and characterised. The photophysical properties, electrochemical behaviours and emission quenching properties of these species were investigated. In concert with the cobalt catalyst [Co(bpy)₃]²⁺, members of this new class of iridium complexes enable the photocatalytic generation of hydrogen from mixed aqueous solutions via an oxidative quenching pathway and display long‐term photostability under constant illumination over 72 h; one of these species achieved a relatively high turnover number of 1880 during this time period. In the case of complex 1 , the three‐component homogeneous photocatalytic system proved to be more efficient than a related system containing a charged complex, [Ir(tfm‐ppy)₂(dtb‐bpy)]⁺ ( 3 , dtb‐bpy=4,4′‐di‐tert‐butyl‐2,2′‐dipyridyl). In combination with a rhodium complex as a water reduction catalyst, the performances of the systems using both complexes were also evaluated, and these systems exhibited a more efficient catalytic propensity for water splitting than did the cobalt‐based systems that have been studied previously.     

Electrochemiluminescence Studies of Phosphorescent Dopant and Host Molecules of Polymer Light-emitting Diodes

Electrochemiluminescence (ECL) from tris(2‐phenylpyridine)irdium [Ir(ppy)₃] was investigated following cross reaction of its anion with oxidized poly(N‐vinyl‐carbazole) (PVK) and its cation with reduced 2‐(4‐biphenylyl)‐5‐(4‐tert‐butyl‐phenyl)‐1,3,4‐oxadiazole (PBD). Both cross reactions show Ir(ppy)₃ emission and the cross reaction of PVK^+·/Ir(ppy)⁻₃ showed the highest ECL intensity. The comparisons of the reaction enthalpy and the energy of Ir(ppy)₃ light emitting shows that reaction between PVK^+· and Ir(ppy)⁻₃ is energy sufficient to populate metal‐to‐ligand charge transfer (MLCT) excited singlet (3.04 eV) of Ir(ppy)₃, while the reaction between Ir(ppy)⁺₃ and PBD^{− ·} is energy efficient to populate MLCT excited triplet (2.4 eV). The ECL result in solution reveals that the energy released from charge transfer between the Ir(ppy)₃ and PVK or PBD is sufficient to produce the excited state of Ir(ppy)₃ in solid polymer light‐emitting diodes (PLEDs) based on PVK:PBD hosts doped by Ir(ppy)₃. These results obtained will provide further insight into charge‐transfer excitation in PLEDs.     

Red‐ and Green‐Emitting Iridium(III) Complexes for a Dual Barometric and Temperature‐Sensitive Paint

A new dual luminescent sensitive paint for barometric pressure and temperature (T) is presented. The green‐emitting iridium(III) complex [Ir(ppy)₂(carbac)] (ppy=2‐phenylpyridine; carbac=1‐(9H‐carbazol‐9‐yl)‐5,5‐dimethylhexane‐2,4‐dione) was applied as a novel probe for T along with the red‐emitting complex [Ir(btpy)₃], (btpy=2‐(benzo[b]thiophene‐2‐yl)pyridine) which functions as a barometric (in fact oxygen‐sensitive) probe. Both iridium complexes were dissolved in different polymer materials to achieve optimal responses. The probe [Ir(ppy)₂(carbac)] was dispersed in gas‐blocking poly(acrylonitrile) microparticles in order to suppress any quenching of its luminescence by oxygen. The barometric probe [Ir(btpy)₃], in turn, was incorporated in a cellulose acetate butyrate film which exhibits good permeability for oxygen. The effects of temperature on the response of the oxygen probe can be corrected by simultaneous optical determination of T, as the poly(acrylonitrile) microparticles containing the temperature indicator are incorporated into the film. The phosphorescent signals of the probes for T and barometric pressure, respectively, can be separated by optical filters due to the ≈75 nm difference in their emission maxima. The dual sensor is applicable to luminescence lifetime imaging of T and barometric pressure. It is the first luminescent dual sensor material for barometric pressure/T based exclusively on the use of Ir^III complexes in combination with luminescence lifetime imaging.     

Decoration of Dibenzofuran Using Cyanocarbazole via 6‐Position as a Molecular Design Approach for High‐Triplet‐Energy Bipolar Host Materials

In this study, two new dibenzofuran derivatives featuring one or two cyanocarbazole units, 6‐(dibenzo[b,d]furan‐4‐yl)‐9‐phenyl‐9H‐carbazole‐3‐carbonitrile ( mBFCzCN) and 6,6′‐(dibenzo[b,d]furan‐4,6‐diyl)bis(9‐phenyl‐9H‐carbazole‐3‐carbonitrile) ( dBFCzCN ), were developed as host materials for phosphorescent organic light emitting diodes (PhOLEDs). A new molecular design connecting the cyanocarbazole to the dibenzofuran using the cyanocarbazole 6‐position instead of its 9‐position was created, and the effects of number of cyanocarbazole units in the dibenzofuran building block on the photophysical and electroluminescence properties were investigated in detail. The mBFCzCN compound revealed high triplet energy (2.78 eV) than that of dBFCzCN (2.68 eV) and good bipolar charge transporting properties. The potential of these materials as hosts for blue and green PhOLEDs was investigated using bis(4,6‐(difluorophenyl)pyridinato‐N,C^2′)picolinate iridium(III) (FIrpic) and tris(2‐phenylpyridinato)iridium(III) (Ir(ppy)₃) dopants, respectively. The results indicated that the mBFCzCN with one cyanocarbazole unit showed better device performance than the dBFCzCN with two cyanocarbazole units in the blue and green devices. High external quantum efficiencies of 19.0 and 21.2 % were demonstrated in the blue and green PhOLEDs with the mBFCzCN host due to its high triplet energy and good bipolar charge transporting characteristics.     

Robust Tris‐Cyclometalated Iridium(III) Phosphors with Ligands for Effective Charge Carrier Injection/Transport: Synthesis,Redox, Photophysical,and Electrophosphorescent Behavior

With the target to design and develop new functionalized green triplet light emitters that possess distinctive electronic properties for robust and highly efficient phosphorescent organic light‐emitting diodes (PHOLEDs), a series of bluish–green to yellow–green phosphorescent tris‐cyclometalated homoleptic iridium(III) complexes [Ir(ppy‐X)₃] (X=SiPh₃, GePh₃, NPh₂, POPh₂, OPh, SPh, SO₂Ph, Hppy=2‐phenylpyridine) have been synthesized and fully characterized by spectroscopic, redox, and photophysical methods. By chemically manipulating the lowest triplet‐state character of Ir(ppy)₃ with some functional main‐group 14–16 moieties on the phenyl ring of ppy, a new family of metallophosphors with high‐emission quantum yields, short triplet‐state lifetimes, and good hole‐injection/hole‐transporting or electron‐injection/electron‐transporting properties can be obtained. Remarkably, all of these Ir^III complexes show outstanding electrophosphorescent performance in multilayer doped devices that surpass that of the state‐of‐the‐art green‐emitting dopant Ir(ppy)₃. The devices described herein can reach the maximum external quantum efficiency (η_ext) of 12.3 %, luminance efficiency (η_L) of 50.8 cd A^?1, power efficiency (η_p) of 36.9 Lm W^?1 for [Ir(ppy‐SiPh₃)₃], 13.9 %, 60.8 cd A^?1, 49.1 Lm W^?1 for [Ir(ppy‐NPh₂)₃], and 10.1 %, 37.6 cd A^?1, 26.1 Lm W^?1 for [Ir(ppy‐SO₂Ph)₃]. These results provide a completely new and effective strategy for carrier injection into the electrophosphor to afford high‐performance PHOLEDs suitable for various display applications.     

IrIII and RuII Complexes Containing Triazole‐Pyridine Ligands: Luminescence Enhancement upon Substitution with β‐Cyclodextrin

Novel 2‐(1‐substituted‐1H‐1,2,3‐triazol‐4‐yl)pyridine (pytl) ligands have been prepared by “click chemistry” and used in the preparation of heteroleptic complexes of Ru and Ir with bipyridine (bpy) and phenylpyridine (ppy) ligands, respectively, resulting in [Ru(bpy)₂(pytl‐R)]Cl₂ and [Ir(ppy)₂(pytl‐R)]Cl (R=methyl, adamantane (ada), β‐cyclodextrin (βCD)). The two diastereoisomers of the Ir complex with the appended β‐cyclodextrin, [Ir(ppy)₂(pytl‐βCD)]Cl, were separated. The [Ru(bpy)₂(pytl‐R)]Cl₂ (R=Me, ada or βCD) complexes have lower lifetimes and quantum yields than other polypyridine complexes. In contrast, the cyclometalated Ir complexes display rather long lifetimes and very high emission quantum yields. The emission quantum yield and lifetime (Φ=0.23, τ=1000 ns) of [Ir(ppy)₂(pytl‐ada)]Cl are surprisingly enhanced in [Ir(ppy)₂(pytl‐βCD)]Cl (Φ=0.54, τ=2800 ns). This behavior is unprecedented for a metal complex and is most likely due to its increased rigidity and protection from water molecules as well as from dioxygen quenching, because of the hydrophobic cavity of the βCD covalently attached to pytl. The emissive excited state is localized on these cyclometalating ligands, as underlined by the shift to the blue (450 nm) upon substitution with two electron‐withdrawing fluorine substituents on the phenyl unit. The significant differences between the quantum yields of the two separate diastereoisomers of [Ir(ppy)₂(pytl‐βCD)]Cl (0.49 vs. 0.70) are attributed to different interactions of the chiral cyclodextrin substituent with the Δ and Λ isomers of the metal complex.     

Spin–Orbit Coupling in Phosphorescent Iridium(III) Complexes

We study the excited states of two iridium(III) complexes with potential applications in organic light‐emitting diodes: fac‐tris(2‐phenylpyridyl)iridium(III) [Ir(ppy)₃] and fac‐tris(1‐methyl‐5‐phenyl‐3‐n‐propyl‐[1,2,4]triazolyl)iridium(III) [Ir(ptz)₃]. Herein we report calculations of the excited states of these complexes from time‐dependent density functional theory (TDDFT) with the zeroth‐order regular approximation (ZORA). We show that results from the one‐component formulation of ZORA, with spin–orbit coupling included perturbatively, accurately reproduce both the results of the two‐component calculations and previously published experimental absorption spectra of the complexes. We are able to trace the effects of both scalar relativistic correction and spin–orbit coupling on the low‐energy excitations and radiative lifetimes of these complexes. In particular, we show that there is an indirect relativistic stabilisation of the metal‐to‐ligand charge transfer (MLCT) states. This is important because it means that indirect relativistic effects increase the degree to which SOC can hybridise singlet and triplet states and hence plays an important role in determining the optical properties of these complexes. We find that these two compounds are remarkably similar in these respects, despite Ir(ppy)₃ and Ir(ptz)₃ emitting green and blue light respectively. However, we predict that these two complexes will show marked differences in their magnetic circular dichroism (MCD) spectra.     

The Preparation of (8‐Hydroxyquinolinato)Bis(2‐Phenylpyridyl)Iridium Complexes and Their Photophysical Properties

Four derivatives of the titled compounds, (8‐hydroxyquinoline)bis(2‐phenylpyridyl)iridium ( IrQ(ppy)₂ ), were prepared. Two of them were confirmed by single crystal X‐ray diffraction analyses, in which solvent molecules were found to be incorporated in the crystal lattices. Their emission spectra display separated dual bands in de‐aerated solutions at about 515 and 645 nm upon excitation. These green and red emissions are attributed to the triplet metal‐to‐ligand charge transfer (³MLCT) and triplet ligand centered (³LC) transitions in Ir(ppy)₂ and IrQ, respectively. It is suggested that such a multiple emission is feasible by nearly orthogonal orientation between the ppy and quinoline ligands in the mixed‐ligand Ir‐compounds which prohibits energy transfer between the two different ligands. The electroluminescence (EL) of these compounds was examined by the fabrication of light‐emitting diodes (LEDs). Unlike the spectra in solutions, their EL spectra displayed only the red emission band. Devices displaying white light can be obtained by mixing the red emission of IrQ(ppy)₂ with a compatible blue emitter (NPB) in separated layers.     

Tricyclometalated Iridium Complexes as Highly Stable Photosensitizers for Light‐Induced Hydrogen Evolution

The development of an efficient and stable artificial photosensitizer for visible‐light‐driven hydrogen production is highly desirable. Herein, a new series of charge‐neutral, heteroleptic tricyclometalated iridium(III) complexes, [Ir(thpy)₂(bt)] ( 1 – 4 ; thpy=2,2′‐thienylpyridine, bt=2‐phenylbenzothiazole and its derivatives), were systematically synthesized and their structural, photophysical, and electrochemical properties were established. Three solid‐state structures were studied by X‐ray crystallographic analysis. This design offers the unique opportunity to drive the metal‐to‐ligand charge‐transfer (MLCT) band to longer wavelengths for these iridium complexes. We describe new molecular platforms that are based on these neutral iridium complexes for the production of hydrogen through visible‐light‐induced photocatalysis over an extended period of time in the presence of [Co(bpy)₃]²⁺ and triethanolamine (TEOA). The maximum amount of hydrogen was obtained under constant irradiation over 72 h and the system could regenerate its activity upon the addition of cobalt‐based catalysts when hydrogen evolution ceased. Our results demonstrated that the dissociation of the [Co(bpy)₃]²⁺ catalyst contributed to the loss of catalytic activity and limited the long‐term catalytic performance of the systems. The properties of the neutral complexes are compared in detail to those of two known non‐neutral bpy‐type complexes, [Ir(thpy)₂(dtb‐bpy)]⁺ ( 5 ) and [Ir(ppy)₂(dtb‐bpy)]⁺ ( 6 ; ppy=2‐phenylpyridine, dtb‐bpy=4,4′‐di‐tert‐butyl‐2,2′‐dipyridyl). This work is expected to contribute toward the development of long‐lasting solar hydrogen‐production systems.     

Enhanced Electrochemiluminescence from a Stoichiometric Ruthenium(II)–Iridium(III) Complex Soft Salt

Electrochemiluminescence (ECL) and electrochemistry are reported for a heterometallic soft salt, [Ru(dtbubpy)₃][Ir(ppy)₂(CN)₂]₂ ( [Ir][Ru][Ir] ), consisting of a 2:1 ratio of complementary charged Ru and Ir complexes possessing two different emission colors. The [Ru]²⁺ and [Ir]^? moieties in the [Ir][Ru][Ir] greatly reduce the energy required to produce ECL. Though ECL intensity in the annihilation path was enhanced 18× relative to that of [Ru(bpy)₃]²⁺, ECL in the co‐reactant path with tri‐n‐propylamine was enhanced a further 4×. Spooling spectroscopy gives insight into ECL mechanisms: the unique light emission at 634 nm is due to the [Ru]²⁺* excited state and no [Ir]^?* was generated in either route. Overall, the soft salt system is anticipated to be attractive and suitable for the development of efficient and low‐energy‐cost ECL detection systems.     

The Pi‐Nature of Methyl Obtained by the Natural Bond Orbital Method: Orbital‐Based Rationalizations of Site‐Dependent Substitution Effects on Fine Color‐Tuning of Luminescence

Both C‐H bonding and antibonding (σ_CH and σ*_CH) of a methyl group would contribute to the highest occupied or lowest unoccupied molecular orbitals (HOMO or LUMO) in methylated derivatives of Ir(ppz)₂ 3 iq (ppz = 1‐phenylpyrazole and 3iq = isoquinoline‐3‐carboxylate). This is found by analysis of HOMO (or LUMO) formed by linear combination of bond orbitals using the natural bond orbital (NBO) method. The elevated level of HOMO (or LUMO) uniformly found for each methylated derivative, indicating the σ_CH‐destabilization outweighs the σ*_CH‐stabilization. To broaden the HOMO‐LUMO gap, methylation at a carbon having smaller contribution to HOMO and/or larger contribution to LUMO is suggested.     

Control of Excitation and Quenching in Multi‐colour Electrogenerated Chemiluminescence Systems through Choice of Co‐reactant

We demonstrate a new approach to manipulate the selective emission in mixed electrogenerated chemiluminescence (ECL) systems, where subtle changes in co‐reactant properties are exploited to control the relative electron‐transfer processes of excitation and quenching. Two closely related tertiary‐amine co‐reactants, tri‐n‐propylamine and N,N‐diisopropylethylamine, generate remarkably different emission profiles: one provides distinct green and red ECL from [Ir(ppy)₃] (ppy=2‐phenylpyridinato‐C2,N) and a [Ru(bpy)₃]²⁺ (bpy=2,2′‐bipyridine) derivative at different applied potentials, whereas the other generates both emissions simultaneously across a wide potential range. These phenomena can be rationalized through the relative exergonicities of electron‐transfer quenching of the excited states, in conjunction with the change in concentration of the quenchers over the applied potential range.     

Visible‐Light‐Driven Hydrogen Production and Polymerization using Triarylboron‐Functionalized Iridium(III) Complexes

The development of novel iridium(III) complexes has continued as an important area of research owing to their highly tunable photophysical properties and versatile applications. In this report, three heteroleptic dimesitylboron‐containing iridium(III) complexes, [Ir(p‐B‐ppy)₂(N^N)]⁺ {p‐B‐ppy=2‐(4‐dimesitylborylphenyl)pyridine; N^N=dipyrido[3,2‐a:2′,3′‐c]phenazine (dppz) ( 1 ), dipyrido[3,2‐d:2′,3′‐f]quinoxaline (dpq) ( 2 ), and 1,10‐phenanthroline (phen) ( 3 )}, were prepared and fully characterized electrochemically, photophysically, and computationally. Altering the conjugated length of the N^N ligands allowed us to tailor the photophysical properties of these complexes, especially their luminescence wavelength, which could be adjusted from λ=583 to 631 nm in CH₂Cl₂. All three complexes were evaluated as visible‐light‐absorbing sensitizers for the photogeneration of hydrogen from water and as photocatalysts for the photopolymerization of methyl methacrylate. The results showed that all of them were active in both photochemical reactions. High activity for the photosensitizer (over 1158 turnover numbers with 1 ) was observed, and the system generated hydrogen even after 20 h. Additionally, poly(methyl methacrylate) with a relatively narrow molecular‐weight distribution was obtained if an initiator (i.e., ethyl α‐bromophenylacetate) was used. The living character of the photoinduced polymerization was confirmed on the basis of successful chain‐extension experiments.     

Enhanced Iridium Complex Electrochemiluminescence Cytosensing and Dynamic Evaluation of Cell‐Surface Carbohydrate Expression

A newly prepared [(ppy)₂Ir(dcbpy)]⁺?PF₆^? (ppy: 2‐phenylpyridyl; dcbpy: 4,4′‐dicarboxy‐2,2′‐bipyridyl) and gold nanoparticle functionalized mesoporous silica nanoparticle (Au/Ir‐MSN) is reported. Based on the binding between concanavalin A (Con A) and mannose, the novel nanoparticle was applied to an ultrasensitive electrochemiluminescence (ECL) in situ cytosensing strategy and the dynamic evaluation of cell‐surface carbohydrate expression. The ECL activity of the presented Con A@Au/Ir‐MSN nanoprobe was greatly enhanced by employing a functionalized nanoparticle and graphene nanomaterial with an increased surface area and simultaneously improved electron‐transfer efficiency at the electrode interface. Under optimal conditions, the sandwich‐type ECL cytosensor showed a linear response to K562 cells at concentrations ranging from 1.0×10² to 1.0×10⁶ cells mL^?1 and realized a low detection limit of a single cell. The proposed method could also be successfully used for monitoring the dynamic variation of carbohydrate expression in cancer cells in response to external stimulation by an inhibitor.     

Long‐Lived Room‐Temperature Deep‐Red‐Emissive Intraligand Triplet Excited State of Naphthalimide in Cyclometalated IrIII Complexes and its Application in Triplet‐Triplet Annihilation‐Based Upconversion

Cyclometalated Ir^III complexes with acetylide ppy and bpy ligands were prepared (ppy=2‐phenylpyridine, bpy=2,2′‐bipyridine) in which naphthal ( Ir‐2 ) and naphthalimide (NI) were attached onto the ppy ( Ir‐3 ) and bpy ligands ( Ir‐4 ) through acetylide bonds. [Ir(ppy)₃] ( Ir‐1 ) was also prepared as a model complex. Room‐temperature phosphorescence was observed for the complexes; both neutral and cationic complexes Ir‐3 and Ir‐4 showed strong absorption in the visible range (ε=39600 M ^?1 cm^?1 at 402 nm and ε=25100 M ^?1 cm^?1 at 404 nm, respectively), long‐lived triplet excited states (τ_T=9.30 μs and 16.45 μs) and room‐temperature red emission (λ_em=640 nm, Φ_p=1.4 % and λ_em=627 nm, Φ_p=0.3 %; cf. Ir‐1 : ε=16600 M ^?1 cm^?1 at 382 nm, τ_em=1.16 μs, Φ_p=72.6 %). Ir‐3 was strongly phosphorescent in non‐polar solvent (i.e., toluene), but the emission was completely quenched in polar solvents (MeCN). Ir‐4 gave an opposite response to the solvent polarity, that is, stronger phosphorescence in polar solvents than in non‐polar solvents. Emission of Ir‐1 and Ir‐2 was not solvent‐polarity‐dependent. The T₁ excited states of Ir‐2 , Ir‐3 , and Ir‐4 were identified as mainly intraligand triplet excited states (³IL) by their small thermally induced Stokes shifts (ΔE_s), nanosecond time‐resolved transient difference absorption spectroscopy, and spin‐density analysis. The complexes were used as triplet photosensitizers for triplet‐triplet annihilation (TTA) upconversion and quantum yields of 7.1 % and 14.4 % were observed for Ir‐2 and Ir‐3 , respectively, whereas the upconversion was negligible for Ir‐1 and Ir‐4 . These results will be useful for designing visible‐light‐harvesting transition‐metal complexes and for their applications as triplet photosensitizers for photocatalysis, photovoltaics, TTA upconversion, etc.