Calix[4]pyrrole‐Based Heteroditopic Ion‐Pair Receptor That Displays Anion‐Modulated,Cation‐Binding Behavior

A new ditopic ion‐pair receptor 1 was designed, synthesized, and characterized. Detailed binding studies served to confirm that this receptor binds fluoride and chloride ions (studied as their tetraalkylammonium salts) and forms stable 1:1 complexes in CDCl₃. Treatment of the halide‐ion complexes of 1 with Group I and II metal ions (Li⁺, Na⁺, K⁺, Cs⁺, Mg²⁺, and Ca²⁺; studied as their perchlorate salts in CD₃CN) revealed unique interactions that were found to depend on both the choice of the added cation and the precomplexed anion. In the case of the fluoride complex [ 1? F]^? (preformed as the tetrabutylammonium (TBA⁺) complex), little evidence of interaction with the K⁺ ion was seen. In contrast, when this same complex (i.e., [ 1? F]^? as the TBA⁺ salt) was treated with the Li⁺ or Na⁺ ions, complete decomplexation of the receptor‐bound fluoride ion was observed. In sharp contrast to what was seen with Li⁺, Na⁺, and K⁺, treating complex [ 1? F]^? with the Cs⁺ ion gave rise to a stable, receptor‐bound ion‐pair complex [Cs ?1? F] that contains the Cs⁺ ion complexed within the cup‐like cavity of the calix[4]pyrrole, which in turn was stabilized in its cone conformation. Different complexation behavior was observed in the case of the chloride complex [ 1? Cl]^?. In this case, no appreciable interaction was observed with Na⁺ or K⁺. In addition, treating [ 1? Cl]^? with Li⁺ produces a tightly hydrated dimeric ion‐pair complex [ 1? LiCl(H₂O)]₂ in which two Li⁺ ions are bound to the crown moiety of the two receptors. In analogy to what was seen in the case of [ 1? F]^?, exposure of [ 1? Cl]^? to the Cs⁺ ion gives rise to an ion‐pair complex [Cs ?1? Cl] in which the cation is bound within the cup of the calix[4]pyrrole. Different complexation modes were also observed when the binding of the fluoride ion was studied by using the tetramethylammonium and tetraethylammonium salts.     

Novel Cesium‐Selective Electrodes Based on Lipophilic 1,3‐Bisbridged Cofacial‐calix[6]crowns

Five bisbridged calix[6]crowns have been investigated as Cs⁺ ionophore in PVC membrane electrodes. As ionophores, three 1,3‐bisbridged calix[6]crown‐4‐ethers( I–III ), 1,3‐bisbridged calix[6]crown‐5‐ether( IV ), and 1,3‐bisbridged calix[6]crown‐6‐ether( V ) have been evaluated. The membranes all give good Nernstian response in the concentration range from 1×10^?7 to 1×10^?1 M of cesium ion. The best detection limits (?log aequation/tex2gif-inf-1.gif=7.08–7.36) are obtained for electrode membranes containing 1,3‐bisbridged cofacial‐calix[6]crown‐4‐ethers( I‐III ), and the values are the lowest compared with those reported previously. The highest selectivity coefficients [ 3.74(Cs/K), 2.63(Cs/Rb)] are obtained for the membrane of 1,3‐bisbridged calix[6]crown‐4‐ether( II ), and these values are also the highest compared with previous reports for Cs⁺‐ISEs. The highest selectivity towards cesium ion is attributed to the geometrically cofacial positions of two crown‐ethers in calix[6]crowns in order to provide the complex of cesium ion and eight oxygens of cofacial crowns.     

Density functional theory study of calix[4]arene‐N‐azacrown‐5, calix[4]arene‐N‐phenyl‐azacrown‐5, and their complexes with alkali‐metal cations: Na+, K+, and Rb+

Theoretical studies of 1,3‐alternate‐25,27‐bis(1‐methoxyethyl)calix[4]arene‐azacrown‐5 ( L₁ ), 1,3‐alternate‐25,27‐bis(1‐methoxyethyl)calix[4]arene‐N‐phenyl‐azacrown‐5 ( L₂ ), and the corresponding complexes M⁺/ L of L₁ and L₂ with the alkali‐metal cations: Na⁺, K⁺, and Rb⁺ have been performed using density functional theory (DFT) at B3LYP/6‐31G* level. The optimized geometric structures obtained from DFT calculations are used to perform natural bond orbital (NBO) analysis. The two main types of driving force metal–ligand and cation–π interactions are investigated. The results indicate that intermolecular electrostatic interactions are dominant and the electron‐donating oxygen offer lone pair electrons to the contacting RY* (1‐center Rydberg) or LP* (1‐center valence antibond lone pair) orbitals of M⁺ (Na⁺, K⁺, and Rb⁺). What's more, the cation–π interactions between the metal ion and π‐orbitals of the two rotated benzene rings play a minor role. For all the structures, the most pronounced changes in geometric parameters upon interaction are observed in the calix[4]arene molecule. In addition, an extra pendant phenyl group attached to nitrogen can promote metal complexation by 3D encapsulation greatly. In addition, the enthalpies of complexation reaction and hydrated cation exchange reaction had been studied by the calculated thermodynamic data. The calculated results of hydrated cation exchange reaction are in a good agreement with the experimental data for the complexes. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010     

Proparacaine complexation with β‐cyclodextrin and p‐sulfonic acid calix[6]arene,as evaluated by varied 1H‐NMR approaches

This study focused on the use of NMR techniques as a tool for the investigation of complex formation between proparacaine and cyclodextrins (CDs) or p‐sulfonic acid calix[6]arene. The pH dependence of the complexation of proparacaine with β‐CD and p‐sulfonic acid calix[6]arene was studied and binding constants were determined by ¹H NMR spectroscopy [diffusion‐ordered spectroscopy (DOSY)] for the charged and uncharged forms of the local anesthetic in β‐CD and p‐sulfonic acid calix[6]arene. The stoichiometries of the complexes was determined and rotating frame Overhauser enhancement spectroscopy (ROESY) 1D experiments revealed details of the molecular insertion of proparacaine into the β‐CD and p‐sulfonic acid calix[6]arene cavities. The results unambiguously demonstrate that pH is an important factor for the development of supramolecular architectures based on β‐CD and p‐sulfonic acid calix[6]arene as the host molecules. Such host–guest complexes were investigated in view of their potential use as new therapeutic formulations, designed to increase the bioavailability and/or to decrease the systemic toxicity of proparacaine in anesthesia procedures. Copyright © 2009 John Wiley & Sons, Ltd.     

单氧代-二硒烷基-1, w-二氧取代杯[4]衍生物的合成,结构及萃取性能研究

Novel macrocyclic monooxa-diselkylene-1,ω-dioxy substituted calix[4]arene derivatives 1a-5a were synthesized by the reaction of calix[4]arene dibromides 1-5 with the disodium salt of bis（2-selenylethyl）ether in the yields between 28% and 64%. Their structures were characterized by proton and carbon NMR spectra. X-Ray structure analysis of la further confirmed the cone conformation of compounds 1a-5a. An interesting host-guest complex of la with dichloromethane via CH/π and C1/π interactions was elucidated. Extraction experiments showed that these novel monooxa-diselkylene-1,ω-dioxy substituted calix[4]arene derivatives 1a-5a had strong extraction ability towards mercury ion. The interaction of Hg^2＋with the calix ligand has also been investigated by 1^H NMR titration.     

Cavity‐Shaped Ligands: Calix[4]arene‐Based Monophosphanes for Fast Suzuki–Miyaura Cross‐Coupling

Five conical calix[4]arenes that have a PPh₂ group as the sole functional group anchored at their upper rim were assessed in palladium‐catalysed cross‐coupling reactions of phenylboronic acid with aryl halides (dioxane, 100 °C, NaH). With arylbromides, remarkably high activities were obtained with the catalytic systems remaining stable for several days. The performance of the ligands is comparable to a Buchwald‐type triarylphosphane, namely, (2′‐methyl[1,1′‐biphenyl]‐2‐yl)diphenylphosphane, which in contrast to the calixarenyl phosphanes tested may display chelating behaviour in solution. With the fastest ligand, 5‐diphenylphosphanyl‐25,26,27,28‐tetra(p‐methoxy)benzyloxy‐calix[4]arene ( 8 ), the reaction turnover frequency for the arylation of 4‐bromotoluene was 321 000 versus 214 000 mol(ArBr).mol(Pd)^?1. h^?1 for the reference ligand. The calixarene ligands were also efficient in Suzuki cross‐coupling reactions with aryl chlorides. Thus, by using 1 mol % of [Pd(OAc)₂] associated with one of the phosphanes, full conversion of the deactivated arenes 4‐chloroanisole and 4‐chlorotoluene was observed after 16 h. The high performance of the calixarenyl–phosphanes in Suzuki–Miyaura coupling of aryl bromides possibly relies on their ability to stabilise a monoligand [Pd⁰L(ArBr)] species through supramolecular binding of the Pd‐bound arene inside the calixarene cavity.     

Tetrakis(bicyclo[2.2.2]oct‐2‐ene)‐Fused Calix[4]pyrrole

Tetrakis(bicyclo[2.2.2]oct‐2‐ene)‐fused calix[4]pyrrole, 5 , was obtained starting from (E)‐1,2‐bis(phenylsulfonyl)ethylene. This new calixpyrrole derivative is the prospective precursor of tetrabenzocalix[4]pyrrole, a potential ion‐pair receptor and an attractive species as a possible deep‐walled ‘molecular container’.     

Molecular Design of Calixarene,Part 4, Synthesis of Novel Double‐Armed p‐(tert‐Butyl)calix[4]arene‐Derived Amides and Their Lead(II)(Pb2+)‐Selective‐Electrode Properties

A series of novel double‐armed p‐(tert‐butyl)calix[4]arenes, carrying benzoylamido, 4‐nitrobenzoylamido, isonicotinamido, α‐naphthamido, acetamido, propionamido, or butyramido groups (see 2 – 8 , resp.) were synthesized in 80 – 86% yield by the reaction of the lower‐rim 1,3‐bis(aminoethoxy)‐substituted calix[4]arenediol 1 with the corresponding acylating agents. Their structures were established by elemental analysis, mass, IR, UV, and ¹H‐NMR spectroscopy. Ion‐selective electrodes (ISEs) for Pb²⁺, carrying 2 – 8 in a PVC membrane as neutral ionophore, were prepared, and their selectivity coefficients for Pb²⁺ (K) were determined against other heavy‐metal ions, alkali and alkaline earth metal ions, and ammonium ions by means of the separate‐solution method. The results obtained indicated that the electrodes based on the calix[4]arene‐derived amides 2 – 8 as the neutral ionophores were all Pb²⁺ selective and exhibited almost theoretical Nernstian slopes, except for 3 and 4 . Typically, the Pb²⁺‐selective electrode based on 6 – 8 exhibited almost Nernstian slopes for Pb²⁺ over a relatively wide concentration range and had a fast response time as well as a long lifetime, although the silver ion interfered strongly. These ISEs based on 6 – 8 showed a relatively good Pb²⁺ selectivity against most of the interfering cations examined, except for Ag⁺. The effect of the side‐arm functions of calix[4]arene derivatives 2 – 8 on the Nernstian slopes and on the selectivity coefficients for Pb²⁺ obtained with the Pb²⁺ ISEs based on 2 – 8 is discussed.     

Long‐Term Stable Silver Subsurface Ion‐Exchanged Glasses for SERS Applications

We report on the formation of silver subsurface ion‐exchanged metal oxide (silver SIMO) glasses and their surface‐enhanced Raman scattering (SERS) activity. The samples were prepared by a combined thermal and chemical three‐step methodology and characterized by transmission electron microscopy (TEM), atomic force microscopy (AFM), environmental electron scanning microscopy (ESEM), and UV/Vis spectroscopy. This unique method provides SERS substrates with protection against contamination and strong, reliable and reproducible SERS enhancement. The Raman enhancement factors of the long‐term stable SIMO glasses were estimated to approximately 10⁷.     

Calix[6]arene‐Based Cascade Complexes of Organic Ion Triplets Stable in a Protic Solvent

Herein we report a D_3h‐symmetric tail‐to‐tail bis‐calix[6]arene 3 featuring two divergent cavities triply connected by ureido linkages. This calix[6]tube was synthesized by a domino Staudinger/aza‐Wittig reaction followed by a macrocyclization reaction. This process also afforded a C_2h‐symmetric isomer that represents a rare example of a self‐threaded rotaxane based on calix[6]arene subunits. The binding properties of 3 have been evaluated by NMR studies. Thus, bis‐calix[6]arene 3 is able to bind simultaneously two neutral ureido guests through an induced‐fit process. The guests are located in the cavities and are recognized through multiple hydrogen‐bonding interactions with the ureido bridges. Host 3 can also simultaneously bind multiple ions and is especially efficient for the complexation of organic ion triplets. The anion is recognized through hydrogen‐bonding interactions at the ureido binding site and is thus located between the two ammonium ions accommodated in the cavities. The resulting [1+1+2] quaternary complexes represent rare examples of cascade complexes with organic cations. These complexes are unique: 1) They are stable even in a markedly protic solvent, 2) the recognition of the ion triplets proceeds in a cooperative way through an induced‐fit process and with a high selectivity, linear cations and doubly charged anions being particularly well recognized, 3) the ions are bound as contact ion triplets thanks to the closeness of the three binding sites, 4) the cationic guests can be exchanged and thus mixed [1+1+1+1] complexes can be obtained, 5) the ureido linkers wrapped around the anion adopt a helical shape and the resulting chirality is sensed by the cations. In other words, bis‐calix[6]arene 3 presents a selective inner tunnel in which multiple guests such as organic ion triplets can be aligned in a cooperative way through induced‐fit processes.     

Chemical Synthesis of Burkholderia Lipid A Modified with Glycosyl Phosphodiester‐Linked 4‐Amino‐4‐deoxy‐β‐L‐arabinose and Its Immunomodulatory Potential

Modification of the Lipid A phosphates by positively charged appendages is a part of the survival strategy of numerous opportunistic Gram‐negative bacteria. The phosphate groups of the cystic fibrosis adapted Burkholderia Lipid A are abundantly esterified by 4‐amino‐4‐deoxy‐β‐L ‐arabinose (β‐L ‐Ara4N), which imposes resistance to antibiotic treatment and contributes to bacterial virulence. To establish structural features accounting for the unique pro‐inflammatory activity of Burkholderia LPS we have synthesised Lipid A substituted by β‐L ‐Ara4N at the anomeric phosphate and its Ara4N‐free counterpart. The double glycosyl phosphodiester was assembled by triazolyl‐tris‐(pyrrolidinyl)phosphonium‐assisted coupling of the β‐L ‐Ara4N H‐phosphonate to α‐lactol of β(1→6) diglucosamine, pentaacylated with (R)‐(3)‐acyloxyacyl‐ and Alloc‐protected (R)‐(3)‐hydroxyacyl residues. The intermediate 1,1′‐glycosyl‐H‐phosphonate diester was oxidised in anhydrous conditions to provide, after total deprotection, β‐L ‐Ara4N‐substituted Burkholderia Lipid A. The β‐L ‐Ara4N modification significantly enhanced the pro‐inflammatory innate immune signaling of otherwise non‐endotoxic Burkholderia Lipid A.     

Synthesis of fully lower‐rim,carbonate‐bridged calix[8]arenes and their curing behavior

Novel fully lower‐rim, carbonate‐bridged calix[8]arene derivatives were successfully synthesized in high yield by the condensation of p‐alkyl substituted calix[8]arenes with triphosgene. Different bases and catalysts were used for the preparation depending on the p‐alkyl substituted groups of the calix[8]arenes. The conformational features of the derivatives were examined by ¹H NMR analysis. Thermosetting formulations were prepared from a mixture of bisphenol A polycarbonate with calix[8]arene carbonate derivatives using sodium benzoate as a catalyst. Their crosslinking behaviors were studied using differential thermal/thermogravimetric analysis. No glass‐transition temperatures were observed after annealing at 280–300 °C. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1149–1155, 2001     

Oligoether‐Strapped Calix[4]pyrrole: An Ion‐Pair Receptor Displaying Cation‐Dependent Chloride Anion Transport

A ditopic ion‐pair receptor ( 1 ), which has tunable cation‐ and anion‐binding sites, has been synthesized and characterized. Spectroscopic analyses provide support for the conclusion that receptor 1 binds fluoride and chloride anions strongly and forms stable 1:1 complexes ([ 1? F]^? and [ 1? Cl]^?) with appropriately chosen salts of these anions in acetonitrile. When the anion complexes of 1 were treated with alkali metal ions (Li⁺, Na⁺, K⁺, Cs⁺, as their perchlorate salts), ion‐dependent interactions were observed that were found to depend on both the choice of added cation and the initially complexed anion. In the case of [ 1? F]^?, no appreciable interaction with the K⁺ ion was seen. On the other hand, when this complex was treated with Li⁺ or Na⁺ ions, decomplexation of the bound fluoride anion was observed. In contrast to what was seen with Li⁺, Na⁺, K⁺, treating [ 1?F ]^? with Cs⁺ ions gave rise to a stable, host‐separated ion‐pair complex, [F ?1? Cs], which contains the Cs⁺ ion bound in the cup‐like portion of the calix[4]pyrrole. Different complexation behavior was seen in the case of the chloride complex, [ 1? Cl]^?. Here, no appreciable interaction was observed with Na⁺ or K⁺. In contrast, treating with Li⁺ produces a tight ion‐pair complex, [ 1? Li ? Cl], in which the cation is bound to the crown moiety. In analogy to what was seen for [ 1? F]^?, treatment of [ 1? Cl]^? with Cs⁺ ions gives rise to a host‐separated ion‐pair complex, [Cl ?1? Cs], in which the cation is bound to the cup of the calix[4]pyrrole. As inferred from liposomal model membrane transport studies, system 1 can act as an effective carrier for several chloride anion salts of Group 1 cations, operating through both symport (chloride+cation co‐transport) and antiport (nitrate‐for‐chloride exchange) mechanisms. This transport behavior stands in contrast to what is seen for simple octamethylcalix[4]pyrrole, which acts as an effective carrier for cesium chloride but does not operates through a nitrate‐for‐chloride anion exchange mechanism.     

Calix[4]arene‐based Bis‐phosphonites,Bis‐phosphites,and Bis‐O‐acyl‐phosphites as Ligands in the Rhodium(I)‐catalyzed Hydroformylation of 1‐Octene

New calix[4]arene‐based bis‐phosphonites, bis‐phosphites and bis‐O‐acylphosphites were synthesized and characterized. Treatment of these P‐ligands with selected rhodium and platinum precursors led to mononuclear complexes that were satisfactorily characterized. The solid state structure of the dirhodium(I) complex 14 has been determined by X‐ray diffraction. The two rhodium centres are bridged by two chloro ligands; one rhodium atom is further coordinated by calix[4]arene phosphorus atoms and the other by cyclooctadiene. The new calix[4]arene P‐ligands were tested in the Rh(I) catalyzed hydroformylation of 1‐octene. All Rh(I) complexes catalyzed the reaction leading to high chemoselectivity with regard to the formation of aldehydes. Yields and n/iso‐selectivities depended on the reaction conditions. Average yields of 80 % and n/iso‐ratios of about 1.3 to 1.5 were observed. High yields of aldehydes can be achieved using the methoxy substituted P‐ligands at low Rh:ligand ratios.     

Mono‐ and Binuclear Rhodium and Platinum Complexes of 1, 3, 5‐Trimethyl‐1, 3, 5‐triaza‐2σ3λ3‐phosphorin‐4, 6‐dionyloxy‐substituted Calix[4]arenes

The reaction behaviour of 1, 3, 5‐triaza‐2σ³λ³‐phosphorin‐4, 6‐dionyloxy‐substituted calix[4]arenes towards mono‐ and binuclear rhodium and platinum complexes was investigated. Special attention was directed to structure and dynamic behaviour of the products in solution and in the solid state. Depending on the molar ratio of the reactands, the reaction of the tetrakis(triazaphosphorindionyloxy)‐substituted calix[4]arene ( 4 ) and its tert‐butyl‐derivative ( 1 ) with [(cod)RhCl]₂ yielded the mono‐ and disubstituted binuclear rhodium complexes 2 , 3 , and 5 . In all cases, a C₂‐symmetrical structure was proved in solution, apparently caused by a fast intramolecular exchange process between cone conformation and 1, 3‐alternating conformation. The X‐ray crystal structure determination of 5 confirmed [(calixarene)RhCl]₂‐coordination through two opposite phosphorus atoms with a P ⃜P separation of 345 pm. The complex displays crystallographic inversion symmetry, and the Rh₂Cl₂ core is thus exactly planar. Reaction of 1 and of the bis(triazaphosphorindionyloxy)‐bis(methoxy)‐substituted tert‐butyl‐calix‐[4]arene ( 7 ) with (cod)Rh(acac) in equimolar ratio and subsequent reaction with HBF₄ led to the expected cationic monorhodium complexes 5 and 8 , involving 1, 3‐alternating P‐Rh‐P‐coordination. The cone conformation in solution was proved by NMR spectroscopy and characteristic values of the ¹J(PRh) coupling constants in the ³¹P‐NMR‐spectra. Reaction of equimolar amounts of 4 with (cod)Rh(acac) or (nbd)Rh(acac) led, by substitution of the labile coordinated acetylacetonato and after addition of HBF₄, to the corresponding mononuclear cationic complexes 9 and 10 . Only two of the four phosphorus atoms in 9 and 10 are coordinated to the central metal atom. Displacement of either cycloocta‐1, 5‐diene or norbornadiene was not observed. For both compounds, the cone conformation was proved by NMR spectroscopy. Reaction of 4 with (cod)PtCl₂ led to the PtCl₂‐complex ( 11 ). As for all compounds mentioned above, only two phosphorus atoms of the ligand coordinate to platinum, while two phosphorus atoms remain uncoordinated (proved by δ³¹P and characteristic values of ¹J(PPt)). NMR‐spectroscopic evidence was found for the existence of the cone conformation in the cis‐configuration of 11 .     

Synthesis of p‐tert‐Butyl‐calix[6] ‐biscrown‐3 via Intramolecular Ring‐closure of 1,4‐Bis (2‐(2‐chloroethoxy) ethoxy) ‐p‐tert‐butyl‐calix[6]arene

With a variation in reaction conditions, 1, 4‐bis (2‐(2‐chloroethoxy)ethoxy)‐calix[6]arene (3) and l,3,5‐tris(2‐(2‐chloroethoxy) ethoxy)‐calix [6] arene (4) or 4 and 4‐chloroethoxyethoxy‐calix[6]crown‐3 (5) were selectively synthesized from p‐tert‐butyl‐calix [6] arene and 2‐(2‐chloroethoxy)ethyltosylate. l,3–4,6‐p‐tert‐butylcalix[6]‐bis‐crown‐3 (6) with (u,u,u,d,d,d) conformation and 1,3–4,5‐p‐tert‐butylcalix[6]‐biscrown‐3 (7) with self‐anchored (u,u, u, u, u, d) conformation were synthesized through an intramolecularly ring‐closing condensation of 1, 4‐bis (2‐(2‐chloroethoxy)ethoxy)‐p‐tert‐butyl‐calix[6]arene (3) in 25% and 15% yield, respectively. Using 5 instead of 3, only 7 was obtained in 65% high yield. 6 and 7 show different complexation properties toward alkali metal and ammonium ions.     

Mechanism of nucleophilic fluorination promoted by bis‐tert‐alcohol‐functionalized crown‐6‐calix[4]arene

Theoretical calculations were performed to elucidate the ability of the recently reported bis‐tert‐alcohol‐functionalized crown‐6‐calix[4]arene (BACCA) molecule to promote nucleophilic fluorination of alkyl mesylates with cesium fluoride reagent. It was found that a similar structure, named BACCAt, can separate the cesium fluoride ion pair in tert‐butanol solution. This separation has a free energy cost, even considering the double hydrogen bonds with the fluoride ion. The solvent has an important effect on the stabilization of this complex, due to interaction with the high dipole moment of the separated ion pair. The observed rate acceleration effect involves a structure with double hydrogen bonds between the BACCAt and the centers of negative charges of the S_N2 transition state. The predicted free energy barrier of 27.3 kcal mol⁻¹ is in excellent agreement with the estimated experimental value of 26.2 kcal mol⁻¹.     

Systematic investigation of ion suppression and enhancement effects of fourteen stable‐isotope‐labeled internal standards by their native analogues using atmospheric‐pressure chemical ionization and electrospray ionization and the relevance for multi‐analyte liquid chromatographic/mass spectrometric procedures

In clinical and forensic toxicology, multi‐analyte procedures are very useful to quantify drugs and poisons of different classes in one run. For liquid chromatographic/tandem mass spectrometric (LC/MS/MS) multi‐analyte procedures, often only a limited number of stable‐isotope‐labeled internal standards (SIL‐ISs) are available. If an SIL‐IS is used for quantification of other analytes, it must be excluded that the co‐eluting native analyte influences its ionization. Therefore, the effect of ion suppression and enhancement of fourteen SIL‐ISs caused by their native analogues has been studied. It could be shown that the native analyte concentration influenced the extent of ion suppression and enhancement effects leading to more suppression with increasing analyte concentration especially when electrospray ionization (ESI) was used. Using atmospheric‐pressure chemical ionization (APCI), methanolic solution showed mainly enhancement effects, whereas no ion suppression and enhancement effect, with one exception, occurred when plasma extracts were used under these conditions. Such differences were not observed using ESI. With ESI, eleven SIL‐ISs showed relevant suppression effects, but only one analyte showed suppression effects when APCI was used. The presented study showed that ion suppression and enhancement tests using matrix‐based samples of different sources are essential for the selection of ISs, particularly if used for several analytes to avoid incorrect quantification. In conclusion, only SIL‐ISs should be selected for which no suppression and enhancement effects can be observed. If not enough ISs are free of ionization interferences, a different ionization technique should be considered. Copyright © 2010 John Wiley & Sons, Ltd.     

Membrane‐permeable Triphosphate Prodrugs of Nucleoside Analogues

The metabolic conversion of nucleoside analogues into their triphosphates often proceeds insufficiently. Rate‐limitations can be at the mono‐, but also at the di‐ and triphosphorylation steps. We developed a nucleoside triphosphate (NTP) delivery system (TriPPPro‐approach). In this approach, NTPs are masked by two bioreversible units at the γ‐phosphate. Using a procedure involving H‐phosphonate chemistry, a series of derivatives bearing approved, as well as potentially antivirally active, nucleoside analogues was synthesized. The enzyme‐triggered delivery of NTPs was demonstrated by pig liver esterase, in human T‐lymphocyte cell extracts and by a polymerase chain reaction using a prodrug of thymidine triphosphate. The TriPPPro‐compounds of some HIV‐inactive nucleoside analogues showed marked anti‐HIV activity. For cellular uptake studies, a fluorescent TriPPPro‐compound was prepared that delivered the triphosphorylated metabolite to intact CEM cells.     

Enhancement of the positive secondary ion yield during low‐energy,dual‐beam depth profiling of polytetrafluoroethylene with 1‐keV Cs+

This work documents the behaviour of the positive secondary ion yield of bulk polytetrafluoroethylene (PTFE) under dual‐beam depth profiling conditions employing 1 keV Ar⁺, Cs⁺ and SF₅⁺. A unique chemical interaction is observed in the form of a dramatic enhancement of the positive secondary ion yield when PTFE is dual‐beam profiled with 1 keV Cs⁺. The distinct absence of such an enhancement is noted for comparison on two non‐fluorinated polymers, polyethylene terephthalate (PET) and polydimethylsiloxane (PDMS). The bulk PTFE was probed using 15‐keV, ⁶⁹Ga⁺ primary ions in dual beam mode under static conditions; 1‐keV Ar⁺ (a non‐reactive, light, noble element), Cs⁺ (a heavier metallic ion known to form clusters) and SF₅⁺ (a polyatomic species) served as the sputter ion species. The total accumulated primary ion dose was of the order of 10¹⁵ ions/cm², which is well beyond the static limit. The enhancement of the positive secondary yield obtained when profiling with 1‐keV Cs⁺ far exceeds that obtained when SF₅⁺ is employed. An explanation of this apparent reactive ion effect in PTFE is offered in terms of polarisation of C? F bonds by Cs⁺ in the vicinity of the implantation site thereby predisposing them to facile scission. The formation of peculiar, periodic Cs_xF_y⁺ (where y = x ? 1) and Cs_xC_yF_z⁺ clusters that can extend to masses approaching 2000 amu are also observed. Such species may serve as useful fingerprints for fluorocarbons that can be initiated via pre‐dosing a sample with low‐energy Cs⁺ prior to static 15‐keV Ga⁺ analysis. Copyright © 2005 John Wiley & Sons, Ltd.