A Novel Metastable Pentavalent Plutonium Solid Phase on the Pathway from Aqueous Plutonium(VI) to PuO2 Nanoparticles

Here we provide evidence that the formation of PuO₂ nanoparticles from oxidized Pu^VI under alkaline conditions proceeds through the formation of an intermediate Pu^V solid phase, similar to NH₄PuO₂CO₃, which is stable over a period of several months. For the first time, state‐of‐the‐art experiments at Pu M₄ and at L₃ absorption edges combined with theoretical calculations unambiguously allow to determine the oxidation state and the local structure of this intermediate phase.     

High‐Level Incorporation of Silver in Gold Nanoclusters: Fluorescence Redshift upon Interaction with Hydrogen Peroxide and Fluorescence Enhancement with Herbicide

High‐level incorporation of Ag in Au nanoclusters (NCs) is conveniently achieved by controlling the concentration of Ag⁺ in the synthesis of bovine serum albumin (BSA)‐protected Au NCs, and the resulting structure is determined to be bimetallic Ag₂₈Au₁₀‐BSA NCs through a series of characterizations including energy‐dispersive X‐ray spectroscopy, mass spectroscopy, and X‐ray photoelectron spectroscopy, together with density functional theory simulations. Interestingly, the Ag₂₈Au₁₀ NCs exhibit a significant fluorescence redshift rather than quenching upon interaction with hydrogen peroxide, providing a new approach to the detection of hydrogen peroxide through direct comparison of their fluorescence peaks. Furthermore, the Ag₂₈Au₁₀ NCs are also used for the sensitive and selective detection of herbicide through fluorescence enhancement. The detection limit for herbicide (0.1 nm ) is far below the health value established by the U.S. Environmental Protection Agency; such sensitive detection was not achieved by using AuAg NCs with low‐level incorporation of Ag or by using the individual metal NCs.     

Glutarimidedioxime: A Complexing and Reducing Reagent for Plutonium Recovery from Spent Nuclear Fuel Reprocessing

Efficient separation processes for recovering uranium and plutonium from spent nuclear fuel are essential to the development of advanced nuclear fuel cycles. The performance characteristics of a new salt‐free complexing and reducing reagent, glutarimidedioxime (H₂A), are reported for recovering plutonium in a PUREX process. With a phase ratio of organic to aqueous of up to 10:1, plutonium can be effectively stripped from 30 % tributyl phosphate (TBP) in kerosene into 1 m HNO₃ with H₂A. The complexation‐reduction mechanism is illustrated with the combination of UV/Vis absorption spectra and the crystal structure of a Pu^IV complex with the reagent. The fast stripping rate and the high efficiency for stripping Pu^IV, through the complexation‐reduction mechanism, is suitable for use in centrifugal contactors with very short contact/resident times, thereby offering significant advantages over conventional processes.     

A Facile Chemical Synthesis of Cu2O Nanocubes Covered with Co3O4 Nanohexagons for the Sensitive Detection of Glucose

Copper (I) oxide nanocubes (Cu₂O NCs) covered with cobalt oxide nanohexagons (Co₃O₄ NHs) were prepared through simple chemical method. Here, ascorbic acid is used as reducing and capping agent for the synthesis of nanocubes and nanohexagons. Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Energy‐dispersive X‐ray spectroscopy (EDX) and X‐ray diffraction spectroscopy (XRD) were employed to confirm the prepared nanocomposite. Cu₂O NCs?Co₃O₄ NHs nanocomposite is drop cast on the glassy carbon electrode (GCE) for the fabrication of glucose sensor. The fabricated Cu₂O NCs?Co₃O₄ NHs/GCE exhibited a better electrocatalytic activity towards the determination of glucose than that of individually fabricated Cu₂O NCs and Co₃O₄ NHs modified GCE. Our finding exhibited a wide linear range from 1 μM to 5330 μM with LOD of 0.63 towards glucose. In addition, the sensor attained appreciable stability, repeatability and reproducibility. Practicality of the sensor was demonstrated in human serum samples. The main advantages of the fabricated sensor are simple, biocompatible, cost effective, fast response and highly stable electrode surface.     

Size Dependence of Doping by a Vacancy Formation Reaction in Copper Sulfide Nanocrystals

Doping of nanocrystals (NCs) is a key, yet underexplored, approach for tuning of the electronic properties of semiconductors. An important route for doping of NCs is by vacancy formation. The size and concentration dependence of doping was studied in copper(I) sulfide (Cu₂S) NCs through a redox reaction with iodine molecules (I₂), which formed vacancies accompanied by a localized surface plasmon response. X‐ray spectroscopy and diffraction reveal transformation from Cu₂S to Cu‐depleted phases, along with CuI formation. Greater reaction efficiency was observed for larger NCs. This behavior is attributed to interplay of the vacancy formation energy, which decreases for smaller sized NCs, and the growth of CuI on the NC surface, which is favored on well‐defined facets of larger NCs. This doping process allows tuning of the plasmonic properties of a semiconductor across a wide range of plasmonic frequencies by varying the size of NCs and the concentration of iodine. Controlled vacancy doping of NCs may be used to tune and tailor semiconductors for use in optoelectronic applications.     

Comparative Structural,Optical, and Photoluminescence Studies of YF3:Pr,YF3:Pr@LaF3, and YF3:Pr@LaF3@SiO2 Core–Shell Nanocrystals

Praseodymium (Pr³⁺)‐doped YF₃ (core) and LaF₃ ‐covered YF₃ :Pr (core–shell) nanocrystals (NCs ) were prepared successfully by an ecofriendly, polyol‐based, co‐precipitation process, which were then coated with a silica shell by using a sol–gel‐based Stober method. X‐ray diffraction (XRD), transmission electron microscopy (TEM ), thermal analysis, Fourier transform infrared (FTIR) , UV /vis, energy bandgap, and photoluminescence studies were used to analyze the crystal structure, morphology, and optical properties of the nanomaterial. XRD and TEM results show that the grain size increases after sequential growth of crystalline LaF₃ and the silica shell. The silica surface modification enhances the solubility and colloidal stability of the core–shell‐SiO₂ NCs . The results indicate that the surface coating affects the optical properties because of the alteration in crystalline size of the materials. The emission intensity of silica‐modified NCs was significantly enhanced compared to that of core and core–shell NCs . These results are attributed to the formation of chemical bonds between core–shell and noncrystalline SiO₂ shell via La–O–Si bridges, which activate the “dormant” Pr³⁺ ions on the surfaces of the nanoparticles. The luminescence efficiency of the as‐prepared core, core–shell, and core–shell‐SiO₂ NCs are comparatively analyzed, and the observed differences are justified on the basis of the surface modification surrounding the luminescent seed core NCs .     

Characterization of a Robust CoII Fluorescent Complex Deposited Intact On HOPG

The new diimine fluorescent ligand ACRI‐1 based on a central acridine yellow core is reported along with its coordination complex [Co₂( ACRI‐1 )₂] ( 1 ), a fluorescent weak ferromagnet. Due to the strong fluorescence of the acridine yellow fluorophore, it is not completely quenched when the ligand is coordinated to Co^II. The magnetic properties of bulk complex 1 and its stability in solution have been studied. Complex 1 has been deposited on highly ordered pyrolitic graphite (HOGP) from solution. The thin films prepared have been characterized by AFM, time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS), grazing incidence X‐ray diffraction (GIXRD), X‐ray absorption spectroscopy (XAS), X‐ray magnetic circular dichroism (XMCD) and theoretical calculations. The data show that the complex is robust and remains intact on the surface of graphite.     

Facile and green methodology for surface‐grafted Al2O3 nanoparticles with biocompatible molecules: preparation of the poly(vinyl alcohol)@poly(vinyl pyrrolidone) nanocomposites

The present work describes preparation of modified alumina with biocompatible, water soluble, and treating agents such as citric acid and ascorbic acid. Also, the influence of the modified nanoparticles (NPs) into the blend of poly(vinyl alcohol)@poly(vinyl pyrrolidone) (50/50) matrix was studied. At first, citric acid and ascorbic acid as environmental friendly agents were grafted on the surface of Al₂O₃ NPs. Then, nanocomposites (NCs) with different amounts of modified Al₂O₃ NPs were prepared via a simple ultrasonic method. The characterizations of the molecular structure of the NCs specified that chemical and physical interactions happened between inorganic and organic counterparts. The mutual effect of modified NPs into the polymer matrix was investigated on the structural, interfacial interaction, thermal stability, and optical properties. The results from morphological characterization confirmed changes in morphology of poly(vinyl alcohol) and poly(vinyl pyrrolidone) after loading NPs. Uniform dispersion of modified spherical Al₂O₃ NPs powders into the matrix of 50/50 polymers was detected by field emission scanning electron microscopy and energy‐dispersive X‐ray. Adding M‐NPs into the polymer matrix expressively improved the thermal stability of NCs. Peaks in ultraviolet–visible spectra were shifted to the higher absorption. Copyright © 2017 John Wiley & Sons, Ltd.     

Visualization of the Heterogeneity of Cerium Oxidation States in Single Pt/Ce2Zr2Ox Catalyst Particles by Nano‐XAFS

The cerium oxidation states in single catalyst particles of Pt/Ce₂Zr₂O_x (x=7 to 8) were investigated by spatially resolved nano X‐ray absorption fine structure (nano‐XAFS) using an X‐ray nanobeam. Differences in the distribution of the Ce oxidation states between Pt/Ce₂Zr₂O_x single particles of different oxygen compositions x were visualized in the obtained two‐dimensional X‐ray fluorescent (XRF) mapping images and the Ce L_III‐edge nano X‐ray absorption near‐edge structure (nano‐XANES) spectra.     

Extension of the Plutonium Oxide Nanocluster Family to Include {Pu16} and {Pu22}

Plutonium(IV) oxide nanoclusters represent an interesting scientific problem regarding structure-function relationships and are also relevant to global concerns surrounding plutonium reprocessing, the remediation of plutonium-contaminated soils, and the storage or disposal of plutonium-containing wastes. Here we report the synthesis of five unique Pu^IV oxide nanoclusters containing 38, 22, or 16 metal centers and capped only with inorganic ligands, such as chlorine and water, which prevent formation of the extended PuO₂ structure. The products are interrogated through single-crystal X-ray diffraction, bond valence calculations, and comparisons to other known metal-oxide nanoclusters. Of particular interest is the incorporation of hydroxide linkages into the smaller plutonium oxide nanoclusters, which underscores previous observations and hypotheses regarding the formation of plutonium polymers and colloids.     

A Reusable Unsupported Rhenium Nanocrystalline Catalyst for Acceptorless Dehydrogenation of Alcohols through γ‐C–H Activation

Rhenium nanocrystalline particles (Re NPs), of 2 nm size, were prepared from NH₄ReO₄ under mild conditions in neat alcohol. The unsupported Re NPs convert secondary and benzylic alcohols to ketones and aldehydes, respectively, through catalytic acceptorless dehydrogenation (AD). The oxidant‐ and acceptor‐free neat dehydrogenation of alcohols to obtain dihydrogen gas is a green and atom‐economical process for making carbonyl compounds. Secondary aliphatic alcohols give quantitative conversion and yield. Transmission electron microscopy (TEM), X‐ray photoelectron spectroscopy (XPS), Re K‐edge X‐ray absorption near‐edge structure (XANES), and X‐ray absorption fine structure (EXAFS) data confirmed the characterization of the Re NPs as metallic rhenium with surface oxidation to rhenium(IV) oxide (ReO₂). Isotope labeling experiments revealed a novel γ‐CH activation mechanism for AD of alcohols.     

Remarkable SERS Activity Observed from Amorphous ZnO Nanocages

Enhancement of the semiconductor–molecule interaction, in particular, promoting the interfacial charge transfer process (ICTP), is key to improving the sensitivity of semiconductor‐based surface enhanced Raman scattering (SERS). Herein, by developing amorphous ZnO nanocages (a‐ZnO NCs), we successfully obtained an ultrahigh enhancement factor of up to 6.62×10⁵. This remarkable SERS sensitivity can be attributed to high‐efficiency ICTP within a‐ZnO NC molecule system, which is caused by metastable electronic states of a‐ZnO NCs. First‐principles density functional theory (DFT) simulations further confirmed a stronger ICTP in a‐ZnO NCs than in their crystalline counterparts. The efficient ICTP can even generate π bonding in Zn−S bonds peculiar to the mercapto molecule adsorbed a‐ZnO NCs, which has been verified through the X‐ray absorption near‐edge structure (XANES) characterization. To the best of our knowledge, this is the first time such remarkable SERS activity has been observed within amorphous semiconductor nanomaterials, which could open a new frontier for developing highly sensitive and stable SERS technology.     

Correlation between the O 2p Orbital and Redox Reaction in LiMn0.6Fe0.4PO4 Nanowires Studied by Soft X‐ray Absorption

The changes in the electronic structure of LiMn_0.6Fe_0.4PO₄ nanowires during discharge processes were investigated by using ex situ soft X‐ray absorption spectroscopy. The Fe L ‐edge X‐ray absorption spectrum attributes the potential plateau at 3.45 V versus Li/Li⁺ of the discharge curve to a reduction of Fe³⁺ to Fe²⁺. The Mn L ‐edge X‐ray absorption spectra exhibit the Mn²⁺ multiplet structure throughout the discharge process, and the crystal‐field splitting was slightly enhanced upon full discharge. The configuration‐interaction full‐multiplet calculation for the X‐ray absorption spectra reveals that the charge‐transfer effect from O 2p to Mn 3d orbitals should be considerably small, unlike that from the O 2p to Fe 3d orbitals. Instead, the O K‐edge X‐ray absorption spectrum shows a clear spectral change during the discharge process, suggesting that the hybridization of O 2p orbitals with Fe 3d orbitals contributes essentially to the reduction.     

Anomalous thermochromic transition of poly(di‐n‐octylsilane)

The thermochromic behavior of poly(di‐n‐octylsilane) {[Si(C₈H₁₇)₂]_n; PDOS} was studied by ultraviolet (UV) absorption, differential scanning calorimetry, and X‐ray diffraction measurements. The structure of PDOS in the low‐temperature phase strongly depended on not only the temperature but also the rate of cooling, that is, the thermal history. Temperature‐dependent UV absorption spectra were highly dependent on thermal hysteresis. Cooled rapidly (10 K/min), PDOS showed two absorption peaks at 3.32 and 3.51 eV in low‐temperature‐ordered phases, whereas a single absorption peak at 3.32 eV became predominant with slow cooling (0.3 K/min). The appearance of the two peaks at low temperatures suggested that a mixture of different conformations was introduced by rapid cooling. A fiber diffraction pattern measured at 240 K after rapid cooling also showed evidence of the existence of novel conformation. A temperature‐dependent powder X‐ray diffraction pattern changed significantly between 270 and 280 K. Rapid cooling reduced the intensity of the X‐ray diffraction peak in this temperature region. This intensity change was explained by the conformational mixture in the polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 1085–1092, 2001     

Spectrographic determination of metallic impurities in PuO2

Summary An emission spectrographic method has been developed for the estimation of 22 metallic impurities in plutonium dioxide using carrier-distillation technique Silver chloride at 5% concentration in a charge of 100 mg has been used as the carrier. Mixed oxide standards containing 10% PuO₂ have been used for the analysis of matching composition of plutonium samples. Precision and accuracy determinations of the synthetic samples indicate 7–16% deviation for most of the elements. The work described includes analysis of reference samples and matrix effect studies. The method is suitable for the chemical quality control analysis of plutonium oxide to be used for Fast Breeder Test Reactor (FBTR) fuel.

---

Spektralanalytische Bestimmung von metallischen Verunreinigungen in PuO₂

Zusammenfassung Mit dem Verfahren der Trägerdestillation können 22 Elemente in Plutoniumdioxid spektralanalytisch erfaßt werden. Als Träger dient 5% Silberchlorid in je 100 mg. Mischoxid-Standards mit 10% PuO₂ wurden verwendet. Bei der Untersuchung von Genauigkeit und Reproduzierbarkeit synthetischer Proben wurden für die meisten Elemente Abweichungen von 7–16% festgestellt. Matrixeinflüsse wurden ebenfalls untersucht sowie Analysenergebnisse für bestimmte Bezugsstandards mitgeteilt. Das Verfahren eignet sich für die Qualitätskontrolle von PuO₂-Brennstoffen für schnelle Brutreaktoren.

     

Observation of Non‐FCC Copper in Alkynyl‐Protected Cu53 Nanoclusters

The only feasible access to non‐face‐centered cubic (FCC) copper was by physical vapor deposition under high vacuum. Now, non‐FCC copper is observed in a series of alkynyl‐protected Cu₅₃ nanoclusters (NCs) obtained from solution‐phase synthesis. Determined by single‐crystal X‐ray crystallography, the structures of Cu₅₃(C≡CPhPh)₉(dppp)₆Cl₃(NO₃)₉ and its two derivatives reveal an ABABC stacking sequence involving 41 Cu atoms. It can be regarded as a mixed FCC and HCP structure, which gives strong evidence that Cu can be arranged in non‐FCC lattice at ambient conditions when proper ligands are provided. Characterization methods including X‐ray absorption fine structure, XPS, ESI‐MS, UV/Vis, Auger spectroscopy, and DFT calculations were carried out. Cu^II was shown to successively coordinate with introduced ligands and changed to Cu^I after bonding with phosphine. The following addition of NaBH₄ and the aging step further reduced it to the Cu₅₃ NC.     

Crystal structure of a NIR‐Emitting DNA‐Stabilized Ag16 Nanocluster

DNA has been used as a scaffold to stabilize small, atomically monodisperse silver nanoclusters, which have attracted attention due to their intriguing photophysical properties. Herein, we describe the X‐ray crystal structure of a DNA‐encapsulated, near‐infrared emitting Ag₁₆ nanocluster (DNA–Ag₁₆NC). The asymmetric unit of the crystal contains two DNA–Ag₁₆NCs and the crystal packing between the DNA–Ag₁₆NCs is promoted by several interactions, such as two silver‐mediated base pairs between 3′‐terminal adenines, two phosphate–Ca²⁺–phosphate interactions, and π‐stacking between two neighboring thymines. Each Ag₁₆NC is confined by two DNA decamers that take on a horse‐shoe‐like conformation and is almost fully shielded from the solvent environment. This structural insight will aid in the determination of the structure/photophysical property relationship for this class of emitters and opens up new research opportunities in fluorescence imaging and sensing using noble‐metal clusters.     

Spinel copper ferrite nanoparticles: Preparation,characterization and catalytic activity

The magnetic CuFe₂O₄ nanoparticles have been synthesized and characterized by various spectroscopic methods, including X‐ray diffraction (XRD), O K, Cu and Fe K ‐edge X‐ray absorption near edge structure (XANES), energy dispersive X‐ray analysis (EDX), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The azide‐alkyne cycloaddition by the reaction of various phenylacetylenes with a mixture of benzyl halides and NaN₃ and also three component (A³) coupling reaction of aldehyde, alkyne and amine catalyzed by CuFe₂O₄ nanoparticles under aerobic conditions led to the formation of the 1,4‐disubstituted‐1,2,3‐triazoles and propargylamines in excellent yields. The catalyst can be recovered by applying an external magnetic field for the subsequent cycloaddition reactions and reused without any tangible loss in catalytic efficiency.     

Synthesis of Bi-doped TiO2 Nanotubes and Enhanced Photocatalytic Activity for Hydrogen Evolution from Glycerol Solution

Bi‐doped TiO₂ nanotubes with variable Bi/Ti ratios were synthesized by hydrothermal treatment in 10 mol·L^?1 NaOH (aq.) through using Bi‐doped TiO₂ particles derived from conventional sol‐gel method as starting materials. The effects of Bi content on the morphology, textural properties, photo absorption and photocatalytic activity of TiO₂ nanotubes were investigated. The scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS) observations of the obtained samples revealed the formation of titanate nanotube structure doped with Bi, which exists as a higher oxidation state than Bi³⁺. Bi‐doping TiO₂ nanotubes exhibited an extension of light absorption into the visible region and improved photocatalytic activities for hydrogen production from a glycerol/water mixed solution as compared with pure TiO₂ nanotubes. There was an optimal Bi‐doped content for the photocatalytic hydrogen production, and high content of Bi would retard the phase transition of titanate to anatase and result in morphology change from nanotube to nanobelt, which in turn decreases the photocatlytic activity for hydrogen evolution.     

Synthesis of Fe3O4@SiO2@DOPisatin‐Ni(II) and Cu(II) nanoparticles: Highly efficient catalyst for the synthesis of sulfoxides and disulfides

The catalytic activity of two magnetic catalysts Fe₃O₄@SiO₂@DOPisatin‐M(II) (M = Ni, Cu) was investigated in the environmentally green H₂O₂ oxidant‐based oxidation of sulfides to sulfoxides and oxidative coupling of thiols to disulfides. By using these catalysts, various substrates were successfully converted into their corresponding product. These catalysts could also be reused multiple time without significant loss of activity. The physical and chemical properties of the catalysts were determined using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), energy dispersive X‐ray spectroscopy (EDX) and atomic absorption spectroscopy (AAS).