Direct Cu‐Catalyzed Allylic Acetoxylation of Δ5‐Steroids at 7‐Position

The efficiency and selectivity of Cu‐catalyzed allylic acetoxylation of alkene in different solvent systems is improved by the presence of different metallic salts in the reaction medium. The methodology is particularly well employed for the direct allylic acetoxylation of Δ⁵‐steroids at 7‐position, for which the resulting acetoxylated product obtained was exclusively α‐isomer. Excellent yield was achieved (up to 90%) under optimized conditions, while significantly reducing the costs and environmental hazards and increasing the yield as compared to the other previously reported methods.     

Iridium‐Catalyzed Enantioselective Allylic Substitution of Unstabilized Enolates Derived from α,β‐Unsaturated Ketones

We report Ir‐catalyzed, enantioselective allylic substitution reactions of unstabilized silyl enolates derived from α,β‐unsaturated ketones. Asymmetric allylic substitution of a variety of allylic carbonates with silyl enolates gave allylated products in 62–94 % yield with 90–98 % ee and >20:1 branched‐to‐linear selectivity. The synthetic utility of this method was illustrated by the short synthesis of an anticancer agent, TEI‐9826.     

Enantioselective Synthesis of Acyclic α‐Quaternary Carboxylic Acid Derivatives through Iridium‐Catalyzed Allylic Alkylation

The first highly enantioselective iridium‐catalyzed allylic alkylation that provides access to products bearing an allylic all‐carbon quaternary stereogenic center has been developed. The reaction utilizes a masked acyl cyanide (MAC) reagent, which enables the one‐pot preparation of α‐quaternary carboxylic acids, esters, and amides with a high degree of enantioselectivity. The utility of these products is further explored through a series of diverse product transformations.     

Asymmetric Synthesis of α,α‐Disubstituted Allylic Amines through Palladium‐Catalyzed Allylic Substitution

The first asymmetric synthesis of important α,α‐disubstituted N‐alkyl allyl amine scaffolds through allylic substitution is reported. This approach is based on palladium catalysis and features ample scope with respect to both the allylic precursor and amine reagent, and high asymmetric induction with enantiomeric ratios (e.r.) up to 98.5:1.5. The use of less‐reactive anilines is also feasible, providing enantioenriched α,α‐disubstituted N‐aryl allylic amines.     

Synthesis of 3‐Fluoropyrrolidines and 4‐Fluoropyrrolidin‐2‐ones from Allylic Fluorides

Various 3‐fluoropyrrolidines and 4‐fluoropyrrolidin‐2‐ones were prepared by 5‐exo‐trig iodocyclisation from allylic fluorides bearing a pending nitrogen nucleophile. These bench‐stable precursors were made accessible upon electrophilic fluorination of the corresponding allylsilanes. The presence of the allylic fluorine substituent induces syn‐stereocontrol upon iodocyclisation with diastereomeric ratios ranging from 10:1 to > 20:1 for all N‐tosyl‐3‐fluoropent‐4‐en‐1‐amines and amides. The sense and level of stereocontrol is strikingly similar to the corresponding iodocyclisation of structurally related allylic fluorides bearing pending oxygen nucleophiles. These results suggest that the syn selectivity observed upon ring closure involves I₂–π complexes with the fluorine positioned inside.     

Highly Enantioselective Formation of α‐Allyl‐α‐Arylcyclopentanones via Pd‐Catalysed Decarboxylative Asymmetric Allylic Alkylation

A highly enantioselective Pd‐catalysed decarboxylative asymmetric allylic alkylation of cyclopentanone derived α‐aryl‐β‐keto esters employing the (R,R)‐ANDEN‐phenyl Trost ligand has been developed. The product (S)‐α‐allyl‐α‐arylcyclopentanones were obtained in excellent yields and enantioselectivities (up to >99.9 % ee). This represents one of the most highly enantioselective formations of an all‐carbon quaternary stereogenic center reported to date. This reaction was demonstrated on a 4.0 mmol scale without any deterioration of enantioselectivity and was exploited as the key enantioselective transformation in an asymmetric formal synthesis of the natural product (+)‐tanikolide.     

Stereospecific Synthesis of α‐Hydroxy‐Cyclopropylboronates from Allylic Epoxides

Herein, we report a catalytic and stereospecific method for the preparation of enantioenriched α‐hydroxy cyclopropylboronates with control in four contiguous stereocenters. The reaction involves the borylation of readily available allylic epoxides using an inexpensive Cu(I) salt and a commercially available phosphine ligand. High diastereocontrol is achieved and different diastereomers can be selectively prepared. Functionalization of the carbon–boron bond provides access to different enantiomerically enriched trisubstituted cyclopropanes from a common intermediate.     

Dual Organocatalysis: Asymmetric Allylic–Allylic Alkylation of α,α‐Dicyanoalkenes and Morita–Baylis–Hillman Carbonates

The first highly enantioselective allylic–allylic alkylation of α,α‐dicyanoalkenes and Morita–Baylis–Hillman carbonates by dual catalysis of (DHQD)₂AQN and (S)‐BINOL has been investigated. Excellent stereoselectivities have been achieved for a broad spectrum of substrates (d.r. > 99:1, up to 99 % ee). The multifunctional allylic products could be efficiently converted to a range of complex chiral cyclic frameworks. EWG=electron‐withdrawing group, (DHQD)₂AQN=hydroquinidine (anthraquinone‐1,4‐diyl) diether, (S)‐BINOL =(S)‐(?)‐1,1′‐bi‐2‐naphthol.

     

Palladium‐Catalyzed Chemoselective Allylic Substitution,Suzuki–Miyaura Cross‐Coupling,and Allene Formation of Bifunctional 2‐B(pin)‐Substituted Allylic Acetate Derivatives

A formidable challenge at the forefront of organic synthesis is the control of chemoselectivity to enable the selective formation of diverse structural motifs from a readily available substrate class. Presented herein is a detailed study of chemoselectivity with palladium‐based phosphane catalysts and readily available 2‐B(pin)‐substituted allylic acetates, benzoates, and carbonates. Depending on the choice of reagents, catalysts, and reaction conditions, 2‐B(pin)‐substituted allylic acetates and derivatives can be steered into one of three reaction manifolds: allylic substitution, Suzuki–Miyaura cross‐coupling, or elimination to form allenes, all with excellent chemoselectivity. Studies on the chemoselectivity of Pd catalysts in their reactivity with boron‐bearing allylic acetate derivatives led to the development of diverse and practical reactions with potential utility in synthetic organic chemistry.     

Copper‐Catalyzed γ‐Selective and Stereospecific Allylic Cross‐Coupling with Secondary Alkylboranes

The scope of the copper‐catalyzed coupling reactions between organoboron compounds and allylic phosphates is expanded significantly by employing triphenylphosphine as a ligand for copper, allowing the use of secondary alkylboron compounds. The reaction proceeds with complete γ‐E‐selectivity and preferential 1,3‐syn stereoselectivity. The reaction of γ‐silicon‐substituted allylic phosphates affords enantioenriched α‐stereogenic allylsilanes.     

Toward Efficient Palladium‐Catalyzed Allylic C?H Alkylation

Recent breakthroughs have proved that direct palladium(II)‐catalyzed allylic C? H alkylation can be achieved. This new procedure shows that the inherent requirement for a leaving group in the Tsuji–Trost palladium‐catalyzed allylic alkylation can be lifted. These initial reports hold great promise for the development of allylic C? H alkylation into a widely applicable methodology, thus providing a means to enhance synthetic efficiency in these reactions.     

Asymmetric Allylic Alkylation of β‐Ketoesters with Allylic Alcohols by a Nickel/Diphosphine Catalyst

Asymmetric allylic alkylation of β‐ketoesters with allylic alcohols catalyzed by [Ni(cod)₂]/(S)‐H₈‐BINAP was found to be a superior synthetic protocol for constructing quaternary chiral centers at the α‐position of β‐ketoesters. The reaction proceeded in high yield and with high enantioselectivity using various β‐ketoesters and allylic alcohols, without any additional activators. The versatility of this methodology for accessing useful and enantioenriched products was demonstrated.     

Copper‐Catalyzed Enantioselective Allylic Alkylation with a γ‐Butyrolactone‐Derived Silyl Ketene Acetal

Herein, we report a Cu‐catalyzed enantioselective allylic alkylation using a γ‐butyrolactone‐derived silyl ketene acetal. Critical to the development of this work was the identification of a novel mono‐picolinamide ligand with the appropriate steric and electronic properties to afford the desired products in high yield (up to 96 %) and high ee (up to 95 %). Aryl, aliphatic, and unsubstituted allylic chlorides bearing a broad range of functionality are well‐tolerated. Spectroscopic studies reveal that a Cu^I species is likely the active catalyst, and DFT calculations suggest ligand sterics play an important role in determining Cu coordination and thus catalyst geometry.     

New Chiral N,S—Ligands with Thiophenyl at Benzylic Position.Palladium（Ⅱ）—catalyzed Enantioselective Allylic Alkylation

New chiral N,S-ligands with oxazoline and thiophenyl sub-stituents at benzene ring and benzylic postition have been pre-pared and applied in palladium-catalyzed asymmetric allylic alkylation reaction to provide the product with high yield and entantioselectivity (82%-93%)ee.     

Asymmetric Catalysis with Silicon‐Based Cuprates: Enantio‐ and Regioselective Allylic Substitution of Linear Precursors

An enantio‐ and regioselective allylic silylation of linear allylic phosphates that makes use of catalytically generated cuprate‐type silicon nucleophiles is reported. The method relies on soft bis(triorganosilyl) zincs as silicon pronucleophiles that are prepared in situ from the corresponding hard lithium reagents by transmetalation with ZnCl₂. With a preformed chiral N‐heterocyclic carbene–copper(I) complex as catalyst, exceedingly high enantiomeric excesses are achieved. The new method is superior to existing ones using a silicon–boron reagent as the source of the silicon nucleophile.     

Enantioselective NiH/Pmrox‐Catalyzed 1,2‐Reduction of α,β‐Unsaturated Ketones

The enantioselective 1,2‐reduction of α,β‐unsaturated ketones was achieved using a NiH catalyst in the presence of pinacolborane. This mild process represents a general method to access a wide variety of structurally diverse α‐chiral allylic alcohols in excellent yields and enantioselectivity, as well as very high levels of ambidoselectivity for 1,2‐ over 1,4‐reduction. Furthermore, for reactions on a 10 mmol scale, catalyst loadings as low as 0.5 mol % could be employed to deliver product without any detrimental effect on the yield, enantio‐, or ambidoselectivity.     

Synthesis of Branched Alkylboronates by Copper‐Catalyzed Allylic Substitution Reactions of Allylic Chlorides with 1,1‐Diborylalkanes

Reported herein is a copper‐catalyzed S_N2′‐selective allylic substitution reaction using readily accessible allylic chlorides and 1,1‐diborylalkanes, a reaction which proceeds with chemoselective C?B bond activation of the 1,1‐diborylalkanes. In the presence of a catalytic amount of [Cu(IMes)Cl] [IMes=1,3‐bis(2,4,6‐trimethylphenyl)imidazole‐2‐ylidene] and LiOtBu as a base, a range of primary and secondary allylic chlorides undergo the S_N2′‐selective allylic substitution reaction to produce branched alkylboronates. The synthetic utilities of the obtained alkylboronates are also presented.     

Synthesis of (−)‐3‐Carene‐2,5‐dione via Allylic Oxidation of (+)‐3‐Carene

Activated carbon‐supported CuCl₂ (CuCl₂/AC) is a heterogeneous catalyst for the liquid‐phase selective allylic oxidation of (+)‐3‐carene with tert‐butyl hydroperoxide (TBHP) and O₂ to produce (?)‐3‐carene‐2,5‐dione. The possible reaction mechanism and the effects of different factors on the allylic oxidation were investigated. The optimal conditions are as follows: reaction temperature, 45 °C; molar ratio of CuCl₂ to (+)‐3‐carene, 1%; volume ratio of (+)‐3‐carene to TBHP, 1:3; and reaction time, 12 h. Under the optimal conditions, the conversion of (+)‐3‐carene reached 100%, whereas the selectivity for (?)‐3‐carene‐2,5‐dione reached 78%. The CuCl₂/AC catalyst was characterized via X‐ray diffraction, and the chemical structure of the target compound was identified via infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, mass spectrometry, and optical analysis.     

Rhodium‐Catalyzed Cascade Reaction of 1,6‐Enynes Involving Addition,Cyclization, and β‐Oxygen Elimination

The reaction of arylboronic acids with 1,6‐enynes that contain an allylic ether moiety is catalyzed by a rhodium(I) complex to produce cyclopentanes with a tetrasubstituted exo olefin and a pendant vinyl group. The reaction is initiated by the regioselective addition of an arylrhodium(I) species to the carbon–carbon triple bond of the 1,6‐enyne. The resulting alkenylrhodium(I) compound subsequently undergoes intramolecular carborhodation of the allylic double bond in a 5‐exo‐trig mode. β Elimination of the methoxy group affords the cyclization product and the catalytically active methoxorhodium(I) species. The use of alkyl Grignard reagents instead of arylboronic acids as organometallic nucleophiles was also examined.     

Catalytic SN2′‐ and Enantioselective Allylic Substitution with a Diborylmethane Reagent and Application in Synthesis

A catalytic method for the site‐ and enantioselective addition of commercially available di‐B(pin)‐methane to allylic phosphates is introduced (pin=pinacolato). Transformations may be facilitated by an NHC–Cu complex (NHC=N‐heterocyclic carbene) and products obtained in 63–95 % yield, 88:12 to >98:2 S_N2′/S_N2 selectivity, and 85:15–99:1 enantiomeric ratio. The utility of the approach, entailing the involvement of different catalytic cross‐coupling processes, is highlighted by its application to the formal synthesis of the cytotoxic natural product rhopaloic acid A.