Maximum Compaction of Ionic Organic Explosives: Bis(hydroxylammonium) 5,5′‐Dinitromethyl‐3,3′‐bis(1,2,4‐oxadiazolate) and its Derivatives

Within this contribution on bis(oxadiazoles) we report on bis‐hydroxylammonium 5,5′‐dinitro‐methyl‐3,3′‐bis(1,2,4‐oxadiazolate), which (to the best of our knowledge) shows the highest density (2.00 g cm^?3 at 92 K, 1.95 g cm^?3 at RT) ever reported for an ionic CHNO explosive. Also the corresponding bis(ammonium) salt shows an outstanding density of 1.95 g cm^?3 (173 K). The reaction of the 3,3′‐bis(1,2,4‐oxadiazolyl)‐5,5′‐bis(2,2′‐dinitro)‐diacetic acid diethyl ester with different nitrogen‐rich bases, such as ammonia, hydrazine, hydroxylamine, and triaminoguanidine causes decarboxylation followed by the formation of the corresponding salts (cation/anion stoichiometry 2:1). The reactions are performed at ambient temperature in H₂O/MeOH mixtures and furnish qualitatively pure products showing characteristics of typical secondary explosives. The obtained compounds were characterized by multinuclear NMR spectroscopy, IR and Raman spectroscopy, as well as mass spectrometry. Single‐crystal X‐ray diffraction studies were performed and the structures of all compounds were determined at low temperatures. The thermal stability was measured by differential scanning calorimetry (DSC). The sensitivities were explored by using the BAM drophammer and friction test. The heats of formation were calculated by the atomization method based on CBS‐4M enthalpies. With these values and the X‐ray densities, several detonation parameters such as the detonation pressure, velocity, energy, and temperature were computed using the EXPLO5 code.     

Energetic Materials Based on 5,5′‐Diamino‐4,4′‐dinitramino‐3,3′‐bi‐1,2,4‐triazole

A simple and straightforward synthesis of 5,5′‐diamino‐4,4′‐dinitramino‐3,3′‐bi‐1,2,4‐triazole by the selective nitration of 4,4′,5,5′‐tetraamino‐3,3′‐bi‐1,2,4‐triazole is presented. The interaction of the amino and nitramino groups improves the energetic properties of this functionalized bitriazole. For a deeper investigation of these properties, various nitrogen‐rich derivatives were synthesized. The new compounds were investigated and characterized by spectroscopy (¹H and ¹³C NMR, IR, Raman), elemental analysis, mass spectrometry, differential thermal analysis (DTA), X‐ray analysis, and impact and friction sensitivities (IS, FS). X‐ray analyses were performed and deliver insight into structural characteristics with which the stability of the compounds can be explained. The standard enthalpies of formation were calculated for all compounds at the CBS‐4M level of theory, revealing highly positive heats of formation. The energetic performance of the new molecules was predicted with the EXPLO5 V6.02 computer. A small‐scale shock reactivity test (SSRT) and a toxicity test gave a first impression of the performance and toxicity of selective compounds.     

1,2,4‐Triazole Links and N‐Azo Bridges Yield Energetic Compounds

Triazole links and polynitropyrazole rings give rise to compounds with energetic properties. These materials were fully characterized by NMR and infrared spectroscopy, elemental analysis, and differential scanning calorimetry (DSC). In addition, the structures of compounds 5 and 8 were confirmed by single‐crystal X‐ray diffraction analysis. Detonation properties, calculated from heats of formation and experimental densities, thermal stabilities, and impact and friction sensitivities support the potential use of these materials for explosive applications.     

Pyrazole–Tetrazole Hybrid with Trinitromethyl,Fluorodinitromethyl, or (Difluoroamino)dinitromethyl Groups: High‐Performance Energetic Materials

High‐nitrogen‐content compounds have attracted great scientific interest and technological importance because of their unique energy content, and they find diverse applications in many fields of science and technology. Understanding of structure–property relationship trends and how to modify them is of paramount importance for their further improvement. Herein, the installation of oxygen‐rich modules, C(NO₂)₃, C(NO₂)₂F, or C(NO₂)₂NF₂, into an endothermic framework, that is, the combination of a nitropyrazole unit and tetrazole ring, is used as a way to design novel energetic compounds. Density, oxygen balance, and enthalpy of formation are enhanced by the presence of these oxygen‐containing units. The structures of all compounds were confirmed by XRD. For crystal packing analysis, it is proposed to use new criterion, Δ_OED, that can serve as a measure of the tightness of molecular packing upon crystal formation. Overall, the materials show promising detonation and propulsion parameters.     

Synthesis,Characterisation and Crystal Structures of Two Bi‐oxadiazole Derivatives Featuring the Trifluoromethyl Group

The synthesis, characterisation, and crystal structure determination of the closely related compounds 3,3′‐bi‐(5‐trifluoromethyl‐1,2,4‐oxadiazole) and 5,5′‐bi‐(2‐ trifluoromethyl‐1,3,4‐oxadiazole) are reported. These two compounds are known for their bioactivity; however, in this study they serve as model compounds to evaluate the suitability of the heterocyclic oxadiazole ring system for energetic materials when the fluorine atoms in the exocyclic CF₃ groups are substituted successively by nitro groups. Quantum chemical calculations for the bi‐1,3,4‐ oxadiazole derivatives with difluoronitromethyl, fluorodinitromethyl, and trinitromethyl groups have been carried out and predict promising energetic performances for both explosive and propulsive applications.     

Syntheses and Promising Properties of Dense Energetic 5,5′‐Dinitramino‐3,3′‐azo‐1,2,4‐oxadiazole and Its Salts

A planar energetic molecule with high density, 5,5′‐dinitramino‐3,3′‐azo‐1,2,4‐oxadiazole ( 4 ), was obtained by the nitration of 5,5′‐diamino‐3,3′‐azo‐1,2,4‐oxadiazole using 100 % nitric acid. In addition, selected nitrogen‐rich salts were prepared. Of them, the neutral compound 4 and its hydroxylammonium salt, 6 , were further confirmed by single‐crystal X‐ray diffraction. Physicochemical and energetic properties including density, thermal stability, and sensitivity were investigated. The energetic performance from the calculated heats of formation and experimental densities indicates that many of them have potential applications as energetic materials.     

Energetic 4,4′‐Oxybis[3,3′‐(1‐hydroxytetrazolyl)]furazan and Its Salts

Energetic compounds that incorporate multiple nitrogen‐rich heterocycles are of great interest for high‐density energetic materials. A facile synthetic strategy to combine an oxy bridge and furazan groups, as well as tetrazole‐ols, into a molecule ( 5 ) was found. Some energetic salts based on 5 were prepared by neutralization. All of the compounds were fully characterized. Additionally, the structure of 7 has been elucidated by single‐crystal XRD analysis. Physicochemical and energetic properties were also studied; these show that these newly designed energetic salts exhibit good thermal stabilities. Hydroxylammonium salt ( 6 ) has a detonation performance and sensitivities comparable with those of 1,3,5‐trinitroperhydro‐1,3,5‐triazine (RDX).     

Enhancing Energetic Properties and Sensitivity by Incorporating Amino and Nitramino Groups into a 1,2,4‐Oxadiazole Building Block

A single nitrogen‐rich heterocyclic ring with many energetic groups is expected to exhibit excellent detonation performance. We report an effective approach for the synthesis of 3‐amino‐5‐nitramino‐1,2,4‐oxadiazole, which has nitramino and amino groups in the same building block. The single‐crystal X‐ray structure shows layered hydrogen‐bonding pairs as well as the presence of a water molecule which ensure insensitivity. Through incorporation of a cation, the hydrazinium or hydroxylammonium salts exhibit good energetic performance and acceptable sensitivities.     

New Energetic Polynitrotetrazoles

This combined experimental, theoretical and comparative study details the syntheses and chemical characterisation of two new energetic polynitromethyl tetrazole derivatives, namely, 2‐(2‐nitro‐2‐azapropyl)‐5‐(trinitromethyl)‐2 H‐tetrazole and its fluorine‐containing analogue 2‐(2‐nitro‐2‐azapropyl)‐5‐(fluorodinitromethyl)‐2 H‐tetrazole. Their crystal structures and energetic behaviour are compared to those of their starting materials, the ammonium salts of the corresponding 5‐(polynitromethyl)‐2 H‐tetrazoles. Additionally, the crystal structures of two further related polynitrotetrazoles are presented.     

Energetic N,N′‐Ethylene‐Bridged Bis(nitropyrazoles): Diversified Functionalities and Properties

A new class of N,N′‐ethylene‐bridged bis(nitropyrazoles) was synthesized and fully characterized. The highly efficient formation of the N,N′‐ethylene bridge was accomplished using dibromoethane and ammonium or potassium pyrazolate. Further functional‐group transformations of diaminobis(pyrazole) and dichlorobis(pyrazole) gave rise to diversified derivatives, including dinitramino‐, diazido‐ and hexanitrobis(pyrazole). Single‐crystal X‐ray diffractions were obtained for hexanitro and diazido derivatives to illustrate the structural characteristics. Heats of formation and detonation performance were calculated by using Gaussian 03 and EXPLO5 v6.01 programs, respectively. Because of the different functionalized groups, the impact and friction sensitivities of these new compounds range from insensitive to sensitive. Among them, the hexanitro derivative displays the most promising overall energetic properties (density (ρ)=1.84 g cm^?3; decomposition temperature (T_d)=250 °C; detonation pressure (P)=34.1 GPa; detonation velocity (v_D)=8759 m s^?1; impact sensitivity (IS)=25 J; friction sensitivity (FS)=160 N), which is competitive with those of 1,3,5‐trinitrotriazacyclohexane (ρ=1.80 g cm^?3; T_d=205 °C; P=35.0 GPa; v_D=8762 m s^?1; IS=7 J; FS=120 N).     

Synthesis and Investigation of 2,6‐Bis(picrylamino)‐3,5‐dinitro‐pyridine (PYX) and Its Salts

2,6‐Bis(picrylamino)pyridine ( 1 ; pre‐PYX) and 2,6‐bis(picrylamino)‐3,5‐dinitropyridine ( 2 ; PYX) were synthesized using an improved literature method. Compounds 1 and 2 were reinvestigated in detail and the X‐ray structures ( 1 : ρ=1.698 g cm^?3 at 173 K; 2 : ρ=1.757 g cm^?3 at 298 K) are given. The reactions of 2 with different bases, such as alkali metal hydroxides (sodium, potassium, rubidium, cesium), and N‐bases (ammonia, hydrazine, hydroxylamine, guanidinium carbonate, aminoguanidine bicarbonate) are reported, as well as metathesis reactions producing energetic salts. Several energetic compounds were synthesized and characterized for the first time using vibrational (IR, Raman) and multinuclear NMR spectroscopy, mass spectrometry, elemental analysis, and DSC. The crystal structures of four energetic salts were determined using low temperature single‐crystal X‐ray diffraction. Heats of formation for the metal‐free species were calculated using the Gaussian 09 software. Detonation parameters were estimated using the EXPLO5 program. The sensitivities towards impact, friction, and electrostatic discharge were also determined.     

Metal Salts of 3,3′‐Diamino‐4,4′‐dinitramino‐5,5′‐bi‐1,2,4‐triazole in Pyrotechnic Compositions

The synthesis of alkali and alkaline earth salts of 3,3′‐diamino‐4,4′‐dinitramino‐5,5′‐bi‐1,2,4‐triazole (H₂ANAT) is reported. The fast and convenient three steps reaction toward the target compounds does not require any organic solvents. In addition to an intensive characterization of all synthesized metal salts, the focus was on developing chlorine and nitrate‐free red‐light‐generating pyrotechnical formulations. Strontium 3,3′‐diamino‐4,4′‐dinitramino‐5,5′‐bitriazolate hexahydrate served as colorant and oxidizer in one molecule. The energetic properties of all developed pyrotechnical formulations assure safe handling and manufacturing.     

1,1′‐Nitramino‐5,5′‐bitetrazoles

1,1′‐Dinitramino‐5,5′‐bitetrazole and 1,1′‐dinitramino‐5,5′‐azobitetrazole were synthesized for the first time. The neutral compounds are extremely sensitive and powerful explosives. Selected nitrogen‐rich salts were prepared to adjust sensitivity and performance values. The compounds were characterized by low‐temperature X‐ray diffraction, IR and Raman spectroscopy, multinuclear NMR spectroscopy, elemental analysis, and DTA/DSC. Calculated energetic performances using the EXPLO5 code based on calculated (CBS‐4M) heats of formation and X‐ray densities support the high performances of the 1,1′‐dinitramino‐5,5′‐bitetrazoles as energetic materials. The sensitivities toward impact, friction, and electrostatic discharge were also explored. Most of the compounds show sensitivities in the range of primary explosives and should only be handled with great care!     

5‐(1,2,3‐Triazol‐1‐yl)tetrazole Derivatives of an Azidotetrazole via Click Chemistry

N? C bonded (non‐bridged) 5‐(1,2,3‐triazol‐1‐yl)tetrazoles were synthesized by the Cu^I‐catalyzed 1,3‐dipolar azide–alkyne cycloaddition click reaction using 5‐azido‐N‐(propan‐2‐ylidene)‐1H‐tetrazole ( 1 ). For example, the click reaction of 1 in the presence of CuSO₄?5 H₂O and Na ascorbate at 65–70 °C for 48 h in CH₃CN/H₂O co‐solvent was found to be limited to only terminal alkynes that have electron‐withdrawing groups, CF₃C?CH ( 2 a ) and SF₅C?CH ( 2 b ), giving rise to isopropylidene‐[5‐(4‐trifluoromethyl‐1,2,3‐triazol‐1‐yl)tetrazol‐1‐yl]amine ( 3 a ) and isopropylidene‐[5‐(4‐pentafluorosulfanyl‐1,2,3‐triazol‐1‐yl)tetrazol‐1‐yl]amine ( 3 b ) in 47 % and 66 % yields, respectively. When carried out under conditions using CuI and 2,6‐lutidine as catalysts at 0 °C for 13 h in CHCl₃, the click reaction was versatile toward alkynes even those having electron‐donating groups. Properties of new products were determined and compared with those of 1 . Heats of formation, detonation pressures, detonation velocities and impact sensitivities are reported for these new 5‐(1,2,3‐triazol‐1‐yl)tetrazoles.     

Synthesis and Characterization of 3,3′‐Bis(Dinitromethyl)‐5,5′‐Azo‐1H‐1,2,4‐Triazole

The synthesis of 3,3′‐bis(dinitromethyl)‐5,5′‐azo‐1H‐1,2,4‐triazole ( 5 ) using the readily available starting material 2‐(5‐amino‐1H‐1,2,4‐triazol‐3‐yl)acetic acid ( 1 ) is described. All compounds were characterized by means of NMR, IR, and Raman spectroscopy. The energetic compound 5 was additionally characterized by single‐crystal X‐ray diffraction and DSC measurements. The sensitivities towards impact, friction and electrical discharge were determined. In addition, detonation parameters (e.g. heat of explosion, detonation velocity) of the target compound were computed using the EXPLO5 code based on the calculated (CBS‐4M) heat of formation and X‐ray density.     

Combination of 1,2,4‐Oxadiazole and 1,2,5‐Oxadiazole Moieties for the Generation of High‐Performance Energetic Materials

Salts generated from linked 1,2,4‐oxadiazole/1,2,5‐oxadiazole precursors exhibit good to excellent thermal stability, density, and, in some cases, energetic performance. The design of these compounds was based on the assumption that by the combination of varying oxadiazole rings, it would be possible to profit from the positive aspects of each of the components. All of the new compounds were fully characterized by elemental analysis, IR spectroscopy, ¹H, ¹³C, and (in some cases) ¹⁵N NMR spectroscopy, and thermal analysis (DSC). The structures of 2 – 3 and 5 ‐ 1 ?5 H₂O were confirmed by single‐crystal X‐ray analysis. Theoretical performance calculations were carried out by using Gaussian 03 (Revision D.01). Compound 2 ‐ 3 , with its good density (1.85 g cm^?3), acceptable sensitivity (14 J, 160 N), and superior detonation pressure (37.4 GPa) and velocity (9046 m s^?1), exhibits performance properties superior to those of 1,3,5‐trinitroperhydro‐1,3,5‐triazine (RDX).     

New Energetic Materials: Functionalized 1‐Ethyl‐5‐aminotetrazoles and 1‐Ethyl‐5‐nitriminotetrazoles

A new way to make a bang : Several functionalized 1‐ethyl‐5‐aminotetrazoles, 1‐ethyl‐5‐nitrimino‐tetrazoles, and copper complexes have been synthesized and their chemical and energetic properties have been comprehensively characterized. The compounds belong to all classes of “energetic materials”: explosives, propellants, and pyrotechnics.

     

Synthesis and Characterization of Bis(triaminoguanidinium) 5,5′‐Dinitrimino‐3,3′‐azo‐1H‐1,2,4‐triazolate – A Novel Insensitive Energetic Material

The synthesis of 5,5′‐diamino‐3,3′‐azo‐1H‐1,2,4‐triazole ( 3 ) by reaction of 5‐acetylamino‐3‐amino‐1H‐1,2,4‐triazole ( 2 ) with potassium permanganate is described. The application of the very straightforward and efficient acetyl protection of 3,5‐diamino‐1H‐1,2,4‐triazole allows selective reactions of the remaining free amino group to form the azo‐functionality. Compound 3 is used as starting material for the synthesis of 5,5′‐dinitrimino‐3,3′‐azo‐1H‐1,2,4‐triazole ( 4 ), which subsequently reacted with organic bases (ammonia, hydrazine, guanidine, aminoguanidine, triaminoguanidine) to form the corresponding nitrogen‐rich triazolate salts ( 5 – 9 ). All substances were fully characterized by IR and Raman as well as multinuclear NMR spectroscopy, mass spectrometry, and differential scanning calorimetry. Selected compounds were additionally characterized by low temperature single‐crystal X‐ray diffraction measurements. The heats of formation of 4 – 9 were calculated by the CBS‐4M method to be 647.7 ( 4 ), 401.2 ( 5 ), 700.4 ( 6 ), 398.4 ( 7 ), 676.5 ( 8 ), and 1089.2 ( 9 ) kJ · mol^–1. With these values as well as the experimentally determined densities several detonation parameters were calculated using both computer codes EXPLO5.03 and EXPLO5.04. In addition, the sensitivities of 5 – 9 were determined by the BAM drophammer and friction tester as well as a small scale electrical discharge device.