Efficient Light‐Harvesting Systems with Tunable Emission through Controlled Precipitation in Confined Nanospace

Light harvesting is a key step in photosynthesis but creation of synthetic light‐harvesting systems (LHSs) with high efficiencies has been challenging. When donor and acceptor dyes with aggregation‐induced emission were trapped within the interior of cross‐linked reverse vesicles, LHSs were obtained readily through spontaneous hydrophobically driven aggregation of the dyes in water. Aggregation in the confined nanospace was critical to the energy transfer and the light‐harvesting efficiency. The efficiency of the excitation energy transfer (EET) reached 95 % at a donor/acceptor ratio of 100:1 and the energy transfer was clearly visible even at a donor/acceptor ratio of 10 000:1. Multicolor emission was achieved simply by tuning the donor/acceptor feed ratio in the preparation and the quantum yield of white light emission from the system was 0.38, the highest reported for organic materials in water to date.     

Light‐Harvesting Systems Based on Organic Nanocrystals To Mimic Chlorosomes

We report the first highly efficient artificial light‐harvesting systems based on nanocrystals of difluoroboron chromophores to mimic the chlorosomes, one of the most efficient light‐harvesting systems found in green photosynthetic bacteria. Uniform nanocrystals with controlled donor/acceptor ratios were prepared by simple coassembly of the donors and acceptors in water. The light‐harvesting system funneled the excitation energy collected by a thousand donor chromophores to a single acceptor. The well‐defined spatial organization of individual chromophores in the nanocrystals enabled an energy transfer efficiency of 95 %, even at a donor/acceptor ratio as high as 1000:1, and a significant fluorescence of the acceptor was observed up to donor/acceptor ratios of 200 000:1.     

Fluorescence Quenching over Short Range in a Donor‐DNA‐Acceptor System

A new donor‐DNA‐acceptor system has been synthesized containing Nile red‐modified 2′‐deoxyuridine as charge donor and 6‐N,N‐dimethylaminopyrene‐modified 2′‐deoxyuridine as acceptor to investigate the charge transfer in DNA duplexes using fluorescence spectroscopy and time‐resolved femtosecond pump‐probe techniques. Fluorescence quenching experiments revealed that the quenching efficiency of Nile red depends on two components: 1) the presence of a charge acceptor and 2) the number of intervening CG and AT base pairs between donor and acceptor. Surprisingly, the quenching efficiency of two base pairs (73 % for CG and the same for AT) is higher than that for one base pair (68 % for CG and 37 % for AT), while at a separation of three base pairs less than 10 % quenching is observed. A comparison with the results of time‐resolved measurements revealed a correlation between quenching efficiency and the first ultrafast time constant suggesting that quenching proceeds via a charge transfer from the donor to the acceptor. All transients are satisfactorily described with two decays: a rapid charge transfer with 600 fs (～10¹² s^?1) that depends strongly and in a non‐linear fashion on the distance between donor and acceptor, and a slower time constant of a few picoseconds (～10¹¹ s^?1) with weak distance dependence. A third time constant on a nanosecond time scale represents the fluorescence lifetime of the donor molecule. According to these results and time‐dependent density functional theory (TDDFT) calculations a combination of single‐step superexchange and multistep hopping mechanisms can be proposed for this short‐range charge transfer. Furthermore, significantly less quenching efficiency and slower charge transfer rates at very short distances indicate that the direct interaction between donor and acceptor leads to a local structural distortion of DNA duplexes which may provide some uncertainty in identifying the charge transfer rates in short‐range systems.     

Remarkable Dependence of the Final Charge Separation Efficiency on the Donor–Acceptor Interaction in Photoinduced Electron Transfer

The unprecedented dependence of final charge separation efficiency as a function of donor–acceptor interaction in covalently‐linked molecules with a rectilinear rigid oligo‐p‐xylene bridge has been observed. Optimization of the donor–acceptor electronic coupling remarkably inhibits the undesirable rapid decay of the singlet charge‐separated state to the ground state, yielding the final long‐lived, triplet charge‐separated state with circa 100 % efficiency. This finding is extremely useful for the rational design of artificial photosynthesis and organic photovoltaic cells toward efficient solar energy conversion.     

Tailoring Excited State Properties and Energy Levels Arrangement via Subtle Structural Design on D‐π‐A Materials

The donor‐π‐conjugated‐acceptor (D‐π‐A) structure is an important design for the luminescent materials because of its diversity in the selections of donor, π‐bridge and acceptor groups. Herein, we demonstrate two examples of D‐π‐A structures capable to finely modulate the excited state properties and arrangement of energy levels, TPA‐AN‐BP and CZP‐AN‐BP , which possess the same acceptor and π‐bridge but different donor. The investigation of their photophysical properties and DFT calculation revealed that the D‐π‐A structure with proper donor, π‐bridge and acceptor can result in separation of frontier molecular orbitals on the corresponding donor and acceptor with an obvious overlap on the π‐bridge, resulting in a hybridized local and charge‐transfer (HLCT ) excited state with high photoluminescent (PL ) efficiencies. Meanwhile, their singlet and triplet states are arranged on corresponding moieties with large energy gap between T₂ and T₁ , and a small energy gap between S₁ and T₂ , which favor the reverse intersystem crossing (RISC ) from high‐lying triplet levels to singlet levels. As a result, the sky‐blue emission non‐doped OLED based on the TPA‐AN‐BP reached maximum external quantum efficiency (EQE ) of 4.39% and a high exciton utilization efficiency (EUE ) of 77%. This study demonstrates a new strategy to construct highly efficient OLED materials.     

Effect of additive length and chemistry on the morphology of blends of conjugated thiophenes and fullerene derivative acceptor molecules

Small molecule additives have been shown to increase the device efficiency of conjugated polymer (donor) and fullerene derivative (acceptor) based organic solar cells by modifying the morphology of the device active layer. In this paper we conduct a systematic study of how additives affect the donor‐acceptor morphology using molecular dynamics simulations of blends of thiophene‐based oligomers, mimicking poly(3‐dodecylthiophene) (P3DDT) or poly(2,2′:5′,2”‐3,3”‐didocyl‐terthiophene) (PTTT), and fullerene derivatives with additives of varying length and chemical functionalization, mimicking experimentally used additives like methyl ester additives, diiodooctane, and alkanedithiols. We find that functionalization of additives with end groups that are attracted to acceptor molecules are necessary to induce increased donor‐acceptor macrophase separation. In blends where acceptors intercalate between oligomer alkyl side chains, functionalized additives decrease acceptor intercalation. Functionalized additives with shorter alkyl segments increase acceptor macrophase separation more than additives with same chemical functionalization but longer alkyl segments. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1046–1057     

Solution‐Grown Organic Single‐Crystalline Donor–Acceptor Heterojunctions for Photovoltaics

Organic single crystals are ideal candidates for high‐performance photovoltaics due to their high charge mobility and long exciton diffusion length; however, they have not been largely considered for photovoltaics due to the practical difficulty in making a heterojunction between donor and acceptor single crystals. Here, we demonstrate that extended single‐crystalline heterojunctions with a consistent donor‐top and acceptor‐bottom structure throughout the substrate can be simply obtained from a mixed solution of C₆₀ (acceptor) and 3,6‐bis(5‐(4‐n‐butylphenyl)thiophene‐2‐yl)‐2,5‐bis(2‐ethylhexyl)pyrrolo[3,4‐c]pyrrole‐1,4‐dione (donor). 46 photovoltaic devices were studied with the power conversion efficiency of (0.255±0.095) % under 1 sun, which is significantly higher than the previously reported value for a vapor‐grown organic single‐crystalline donor–acceptor heterojunction (0.007 %). As such, this work opens a practical avenue for the study of organic photovoltaics based on single crystals.     

The Role of the Axial Substituent in Subphthalocyanine Acceptors for Bulk‐Heterojunction Solar Cells

Four hexachlorosubphthalocyanines SubPcCl₆‐X bearing different axial substituents (X) have been synthesized for use as novel electron acceptors in solution‐processed bulk‐heterojunction organic solar cells. Subphthalocyanines are aromatic chromophoric molecules with cone‐shaped structure, good solution processability, intense optical absorption in the visible spectral region, appropriate electron mobilities, and tunable energy levels. Solar cells with subphthalocyanines as the electron acceptor and PTB7‐Th as the electron donor exhibit a power conversion efficiency up to 4 % and an external quantum efficiency approaching 60 % due to significant contributions from both the electron donor and the electron acceptor to the photocurrent, indicating a promising prospect of non‐fullerene acceptors based on subphthalocyanines and structurally related systems.     

A Methodological Study on Tuning the Thermally Activated Delayed Fluorescent Performance by Molecular Constitution in Acridine–Benzophenone Derivatives

Thermally activated delayed fluorescent (TADF) emitters are usually designed as donor–acceptor structures with large dihedral angles, which tend to incur low fluorescent efficiency, and therefore, through molecular design various strategies have been proposed to increase the efficiency of emitters; however, few studies have compared these strategies in one TADF system. In this study, a novel TADF molecule, [4‐(9,9‐diphenylacridin‐10‐yl)phenyl](phenyl)methanone ( BP‐DPAC ), was designed as a prototype, and two derivatives, BP‐Ph‐DPAC and DPAC‐BP‐DPAC , were also prepared to represent two common approaches to enhance TADF performance. Compared with the maximum external quantum efficiency (EQE) of 6.82 % for BP‐DPAC , organic light‐emitting diodes (OLED) devices based on DPAC‐BP‐DPAC exhibited enhanced TADF properties with the highest maximum EQE of 18.67 %, owing to an additional diphenylacridine donor, whereas BP‐Ph‐DPAC showed non‐TADF properties and exhibited the lowest EQE of 4.25 %, owing to the insertion of a phenyl ring between donor and acceptor.     

Solution‐Processed Bulk‐Heterojunction Photovoltaic Cells Based on Dendritic and Star‐Shaped D‐π‐A Organic Dyes

A series of D ‐π‐A organic dendritic and star‐shaped molecules based on three various chromophores (i.e., the truxene nodes, triphenylamine moieties as the donor, and benzothiadiazole chromophore as the acceptor) and their corresponding model compounds are facilely developed. Their photophysical and electrochemical properties are investigated in detail by UV/Vis absorption and photoluminescent spectroscopy, and cyclic voltammetry. By changing the various conjugated spacers (i.e., single bond, double bond, and triple bond) among the three chromophores of dendritic series, their photophysical properties (that is, the one‐photon absorption range and two‐photon absorption cross‐section values) are effectively modulated. All D ‐π‐A conjugated oligomers show a broad and strong absorption band from 250 to 700 nm in thin films. Solution‐processed bulk‐heterojunction photovoltaic devices using our oligomer as donor and PCBM as acceptor are fabricated and measured. The power conversion efficiency of the devices based on our oligomers continuously increases from DBTTr to TRTD2A as a result of an increasing relative absorption intensity in longer wavelength region by changing the donor‐acceptor ratio and conjugated spacers between the donor and acceptor. The power conversion efficiency of the devices based on TRTD2A was 0.54 % under the illumination of AM 1.5 and 100 mW cm^?2, which is the highest value recorded based on D ‐π‐A conjugated oligomers containing triphenylamine moieties and benzothiadiazole chromophores with truxene to date.     

Excitation Energy Transfer in Dendritic Host–Guest Donor–Acceptor Systems

We report on a study of a physically formed host–guest system, which was designed to be investigated by fluorescence energy transfer. All donor and acceptor molecules used were cyanine dyes. Investigation was performed at the ensemble level as well as at the single‐molecule level. The ensemble measurements revealed a distribution of binding sites as well for the donor as for the acceptor. Accordingly, we found a distribution of the energy transfer efficiency. At the single‐molecule level, these distributions are still present. We could discriminate entities that show very efficient energy transfer, some that do not show any energy transfer and systems whose energy transfer efficiency is only about 50 %. The latter allowed the time‐resolved detection of energy transfer of single entities through the acceptor decay. Finally, we discuss the observation that the energy transfer efficiency fluctuates as a function of time.     

Synthesis and photovoltaic behavior of two new alternative donor–acceptor conjugated copolymers containing isoindigo moiety

Two donor–acceptor copolymers (P1 and P2) containing isoindigo as the acceptor unit and the benzodithiophene and bisthiophene‐dithieno[3,2‐b:2′,3′‐d]‐pyrrole as the donor unit have been designed and synthesized by the Pd‐catalyzed Stille coupling reaction. The copolymers show broad and flat absorption, exhibit good solubility, and thermal stability, but possess optical bandgaps of 1.62 and 1.42 eV, respectively, and different donor–acceptor distance, of which the former is shorter than the later. The power conversion efficiency of the polymer solar cells based on P2:PC₆₁BM (1:1 wt%) reached 1.86% with open‐circuit voltage of 0.54 V and a short‐circuit current of 6.36 mA/cm², under the illumination of AM 1.5, 100 mW/cm². Copyright © 2013 John Wiley & Sons, Ltd.     

Critical Role of Molecular Electrostatic Potential on Charge Generation in Organic Solar Cells

Revealing the charge generation is a crucial step to understand the organic photovoltaics. Recent development in non‐fullerene organic solar cells (OSCs) indicates efficient charge separation even with negligible energetic offset between the donor and acceptor materials. These new findings trigger a critical question concerning the charge separation mechanism in OSCs, traditionally believed to result from sufficient energetic offset between the polymer donor and fullerene acceptor. We propose a new mechanism, which involves the molecular electrostatic potential, to explain efficient charge separation in non‐fullerene OSCs. Together with the new mechanism, we demonstrate a record efficiency of ~12% for systems with negligible energetic offset between donor and acceptor materials. Our analysis also rationalizes different requirement of the energetic offset between fullerene‐based and non‐fullerene OSCs, and paves the way for further design of OSC materials with both high photocurrent and high photovoltage at the same time.     

Organic Photovoltaic Devices Based on a New Class of Oligothienylenevinylene Derivatives as Donor Materials

A new class of donor–acceptor‐containing oligothienylenevinylenes with a triphenylamine donor and a dicyanovinyl group as acceptor has been synthesized and characterized. By extending the oligothiophene backbone, both the optical bandgaps and the charge‐transport properties can be tuned. These oligothienylenevinylene derivatives show intense charge‐transfer absorption bands that cover the entire visible spectrum, with low optical bandgaps of approximately 1.64 eV. In addition, electrochemical studies reveal that these compounds possess relatively large ionization potentials of approximately 5.5 eV. On the basis of these newly developed dicyanovinyl‐substituted chromophores as donor materials and C₆₀ as acceptor material, bilayer organic photovoltaic devices have been fabricated, with the best device showing a high power conversion efficiency (PCE) of 2.0 %, with an open‐circuit voltage of 0.68 V and a fill factor of 0.60 after thermal annealing. The obvious morphology change with the formation of small domains in thin films and the reduction of series resistance are believed to be responsible for the dramatic performance improvement upon thermal annealing.     

Synthesis and Characterization of (2E,2 E)‐3,3‐((9,9‐diocyl‐9H‐flourene‐2,7‐diyl)bis(4,1‐phenylene))bis(2‐cyanoacylic acid) as a Symmetrical Metal‐free Organic Dye

In this study a novel symmetrical metal‐free organic dye for applications in dye‐sensitized solar cells (DSSCs) was synthesized. This dye ( D ) was designed with A–π–D–π–A framework and synthesized with 9,9‐dioctylfluorene as electron donor, phenylene as π‐spacer and cyanoacetic acid as electron acceptor. The chemical structure of product was determined using UV‐Vis, FT‐IR, CNMR, HNMR spectroscopy techniques. The presence of a phenylene π‐bridge between the donor and the acceptor units and the di‐anchoring moieties in this structure led to enhancement of conjugation lengths and molar extinction coefficient (ε) that is promising for further improvement of the conversion efficiency of DSSCs.     

Constructing a Strongly Absorbing Low‐Bandgap Polymer Acceptor for High‐Performance All‐Polymer Solar Cells

All‐polymer solar cells (all‐PSCs) offer unique morphology stability for the application as flexible devices, but the lack of high‐performance polymer acceptors limits their power conversion efficiency (PCE) to a value lower than those of the PSCs based on fullerene derivative or organic small molecule acceptors. We herein demonstrate a strategy to synthesize a high‐performance polymer acceptor PZ1 by embedding an acceptor–donor–acceptor building block into the polymer main chain. PZ1 possesses broad absorption with a low band gap of 1.55 eV and high absorption coefficient (1.3×10⁵ cm⁻¹). The all‐PSCs with the wide‐band‐gap polymer PBDB‐T as donor and PZ1 as acceptor showed a record‐high PCE of 9.19 % for the all‐PSCs. The success of our polymerization strategy can provide a new way to develop efficient polymer acceptors for all‐PSCs.     

An Electron Acceptor with Porphyrin and Perylene Bisimides for Efficient Non‐Fullerene Solar Cells

A star‐shaped electron acceptor based on porphyrin as a core and perylene bisimide as end groups was constructed for application in non‐fullerene organic solar cells. The new conjugated molecule exhibits aligned energy levels, good electron mobility, and complementary absorption with a donor polymer. These advantages facilitate a high power conversion efficiency of 7.4 % in non‐fullerene solar cells, which represents the highest photovoltaic performance based on porphyrin derivatives as the acceptor.     

Synthesis and electroluminescent performance of thermally activated delayed fluorescence‐conjugated polymers with simple formylphenyl as pendant acceptor

Formylphenyl has been demonstrated to act as an acceptor to construct thermally activated delayed fluorescence (TADF) emitter, and therefore a series of the TADF‐conjugated polymers with formylphenyl as pendant acceptor and carbazole/acridine as backbone donor are designed and synthesized. All polymers involve the twisted donor/acceptor structural moieties with the sufficiently spatial separation between the highest occupied molecular orbital and the lowest unoccupied molecular orbital as well as a small singlet/triplet splitting, and exhibit the legible TADF features confirmed by theoretical calculation and their transient decay spectra. The solution‐processed organic light‐emitting diodes using neat film of the polymers as emissive layer achieve excellent performance with the maximum external quantum efficiency (EQE) of up to 10.6%, the maximum current efficiency of up to 35.3 cd A⁻¹ and the low turn‐on voltage of 2.7 V. Moreover, the EQE still remains 10.3% at the luminance of 1000 cd m⁻² with the low driving voltage of 4.4 V and extremely small efficiency roll‐off. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1989–1996     

Excitation‐Wavelength‐Dependent,Ultrafast Photoinduced Electron Transfer in Bisferrocene/BF2‐Chelated‐Azadipyrromethene/Fullerene Tetrads

Donor–acceptor distance, orientation, and photoexcitation wavelength are key factors in governing the efficiency and mechanism of electron‐transfer reactions both in natural and synthetic systems. Although distance and orientation effects have been successfully demonstrated in simple donor–acceptor dyads, revealing excitation‐wavelength‐dependent photochemical properties demands multimodular, photosynthetic‐reaction‐center model compounds. Here, we successfully demonstrate donor– acceptor excitation‐wavelength‐dependent, ultrafast charge separation and charge recombination in newly synthesized, novel tetrads featuring bisferrocene, BF₂‐chelated azadipyrromethene, and fullerene entities. The tetrads synthesized using multistep synthetic procedure revealed characteristic optical, redox, and photo reactivities of the individual components and featured “closely” and “distantly” positioned donor–acceptor systems. The near‐IR‐emitting BF₂‐chelated azadipyrromethene acted as a photosensitizing electron acceptor along with fullerene, while the ferrocene entities acted as electron donors. Both tetrads revealed excitation‐wavelength‐dependent, photoinduced, electron‐transfer events as probed by femtosecond transient absorption spectroscopy. That is, formation of the Fc⁺–ADP–C₆₀^.? charge‐separated state upon C₆₀ excitation, and Fc⁺–ADP^.?–C₆₀ formation upon ADP excitation is demonstrated.