Proton‐Transfer Polymerization (HTP): Converting Methacrylates to Polyesters by an N‐Heterocyclic Carbene

A new polymerization termed proton (H)‐transfer polymerization (HTP) has been developed to convert dimethacrylates to unsaturated polyesters. HTP is catalyzed by a selective N‐heterocyclic carbene capable of promoting intermolecular Umpolung condensation through proton transfer and proceeds through the step‐growth propagation cycles via enamine intermediates. The role of the added suitable phenol, which is critical for achieving an effective HTP, is twofold: shutting down the radically induced chain‐growth addition polymerization under HTP conditions (typically at 80–120 °C) and facilitating proton transfer after each monomer enchainment. The resulting unsaturated polyesters have a high thermal stability and can be readily cross‐linked to robust polyester materials.     

From the N‐Heterocyclic Carbene‐Catalyzed Conjugate Addition of Alcohols to the Controlled Polymerization of (Meth)acrylates

Among various N‐heterocyclic carbenes (NHCs) tested, only 1,3‐bis(tert‐butyl)imidazol‐2‐ylidene (NHC^tBu) proved to selectively promote the catalytic conjugate addition of alcohols onto (meth)acrylate substrates. This rather rare example of NHC‐catalyzed 1,4‐addition of alcohols was investigated as a simple means to trigger the polymerization of both methyl methacrylate and methyl acrylate (MMA and MA, respectively). Well‐defined α‐alkoxy poly(methyl (meth)acrylate) (PM(M)A) chains, the molar masses of which could be controlled by the initial [(meth)acrylate]₀/[ROH]₀ molar ratio, were ultimately obtained in N,N‐dimethylformamide at 25 °C. A hydroxyl‐terminated poly(ethylene oxide) (PEO‐OH) macro‐initiator was also employed to directly access PEO‐b‐PMMA amphiphilic block copolymers. Investigations into the reaction mechanism by DFT calculations revealed the occurrence of two competitive concerted pathways, involving either the activation of the alcohol or that of the monomer by NHC^tBu.     

Generating and Trapping Metalla‐N‐Heterocyclic Carbenes

By means of a combined experimental and theoretical approach, the electronic features and chemical behavior of metalla‐N‐heterocyclic carbenes (MNHCs, N‐heterocyclic carbenes containing a metal atom within the heterocyclic skeleton) have been established and compared with those of classical NHCs. MNHCs are strongly basic (proton affinity and pK_a values around 290 kcal mol^?1 and 36, respectively) with a narrow singlet–triplet gap (around 23 kcal mol^?1). MNHCs can be generated from the corresponding metalla‐imidazolium salts and trapped by addition of transition‐metal complexes affording the corresponding heterodimetallic dicarbene derivatives, which can serve as carbene transfer agents.     

Bonding Analysis of N‐Heterocyclic Carbene Tautomers and Phosphine Ligands in Transition‐Metal Complexes: A Theoretical Study

DFT calculations at the BP86/TZ2P level were carried out to analyze quantitatively the metal–ligand bonding in transition‐metal complexes that contain imidazole (IMID), imidazol‐2‐ylidene (nNHC), or imidazol‐4‐ylidene (aNHC). The calculated complexes are [Cl₄TM(L)] (TM=Ti, Zr, Hf), [(CO)₅TM(L)] (TM=Cr, Mo, W), [(CO)₄TM(L)] (TM=Fe, Ru, Os), and [ClTM(L)] (TM=Cu, Ag, Au). The relative energies of the free ligands increase in the order IMID<nNHC<aNHC. The energy levels of the carbon σ lone‐pair orbitals suggest the trend aNHC>nNHC>IMID for the donor strength, which is in agreement with the progression of the metal–ligand bond‐dissociation energy (BDE) for the three ligands for all metals of Groups 4, 6, 8, and 10. The electrostatic attraction can also be decisive in determining trends in ligand–metal bond strength. The comparison of the results of energy decomposition analysis for the Group 6 complexes [(CO)₅TM(L)] (L=nNHC, aNHC, IMID) with phosphine complexes (L=PMe₃ and PCl₃) shows that the phosphine ligands are weaker σ donors and better π acceptors than the NHC tautomers nNHC, aNHC, and IMID.     

Rate and Equilibrium Constants for the Addition of N‐Heterocyclic Carbenes into Benzaldehydes: A Remarkable 2‐Substituent Effect

Rate and equilibrium constants for the reaction between N‐aryl triazolium N‐heterocyclic carbene (NHC) precatalysts and substituted benzaldehyde derivatives to form 3‐(hydroxybenzyl)azolium adducts under both catalytic and stoichiometric conditions have been measured. Kinetic analysis and reaction profile fitting of both the forward and reverse reactions, plus onwards reaction to the Breslow intermediate, demonstrate the remarkable effect of the benzaldehyde 2‐substituent in these reactions and provide insight into the chemoselectivity of cross‐benzoin reactions.     

Tunneling Assists the 1,2‐Hydrogen Shift in N‐Heterocyclic Carbenes

At room temperature, 1,2‐hydrogen‐transfer reactions of N‐heterocyclic carbenes, like the imidazol‐2‐ylidene to give imidazole is shown to occurr almost entirely (>90 %) by quantum mechanical tunneling (QMT). At 60 K in an Ar matrix, for the 2, 3‐dihydrothiazol‐2‐ylidene→thiazole transformation, QMT is shown to increase the rate about 10⁵ times. Calculations including small‐curvature tunneling show that the barrier for intermolecular 1,2‐hydrogen‐transfer reaction is small, and QMT leads to a reduced rate of the forward reaction because of nonclassical reflections even at room temperature. A small barrier also leads to smaller kinetic isotope effects because of efficient QMT by both H and D. QMT does not always lead to faster reactions or larger KIE values, particularly when the barrier is small.     

One‐Electron Oxidation of a Disilicon(0) Compound: An Experimental and Theoretical Study of [Si2]+ Trapped by N‐Heterocyclic Carbenes

One‐electron oxidation of the disilicon(0) compound Si₂(Idipp)₂ ( 1 , Idipp=1,3‐bis(2,6‐diisopropylphenyl)imidazolin‐2‐ylidene) with [Fe(C₅Me₅)₂][B(Ar^F)₄] (Ar^F=C₆H₃‐3,5‐(CF₃)₂) affords selectively the green radical salt [Si₂(Idipp)₂][B(Ar^F)₄] ( 1 ‐[B(Ar^F)₄). Oxidation of the centrosymmetric 1 occurs reversibly at a low redox potential (E_1/2=?1.250 V vs. Fc⁺/Fc), and is accompanied by considerable structural changes as shown by single‐crystal X‐ray structural analysis of 1 ‐B(Ar^F)₄. These include a shortening of the Si?Si bond, a widening of the Si‐Si‐C_NHC angles, and a lowering of the symmetry, leading to a quite different conformation of the NHC substituents at the two inequivalent Si sites in 1⁺ . Comparative quantum chemical calculations of 1 and 1⁺ indicate that electron ejection occurs from the symmetric (n₊) combination of the Si lone pairs (HOMO). EPR studies of 1 ‐B(Ar^F)₄ in frozen solution verified the inequivalency of the two Si sites observed in the solid‐state, and point in agreement with the theoretical results to an almost equal distribution of the spin density over the two Si atoms, leading to quite similar ²⁹Si hyperfine coupling tensors in 1⁺ . EPR studies of 1 ‐B(Ar^F)₄ in liquid solution unraveled a topomerization with a low activation barrier that interconverts the two Si sites in 1⁺ .     

Cascade Olefin Isomerization/Intramolecular Diels–Alder Reaction Catalyzed by N‐Heterocyclic Carbenes

The addition of an N‐heterocyclic carbene to the carbonyl group of an α,β,γ,δ‐unsaturated enol ester affords a hemiacetal azolium intermediate that enables a cascade olefin isomerization/Diels–Alder reaction, for which mechanistic studies implicate Lewis base catalysis. Preliminary studies into the utility of the products have been undertaken with reductive and oxidative cleavage, giving materials for potential use in complex‐target synthesis.     

The Measure of All Rings—N‐Heterocyclic Carbenes

Quantification and variation of characteristic properties of different ligand classes is an exciting and rewarding research field. N‐Heterocyclic carbenes (NHCs) are of special interest since their electron richness and structure provide a unique class of ligands and organocatalysts. Consequently, they have found widespread application as ligands in transition‐metal catalysis and organometallic chemistry, and as organocatalysts in their own right. Herein we provide an overview on physicochemical data (electronics, sterics, bond strength) of NHCs that are essential for the design, application, and mechanistic understanding of NHCs in catalysis.     

Highly Stable Water‐Soluble Platinum Nanoparticles Stabilized by Hydrophilic N‐Heterocyclic Carbenes

Controlling the synthesis of stable metal nanoparticles in water is a current challenge in nanochemistry. The strategy presented herein uses sulfonated N‐heterocyclic carbene (NHC) ligands to stabilize platinum nanoparticles (PtNPs) in water, under air, for an indefinite time period. The particles were prepared by thermal decomposition of a preformed molecular Pt complex containing the NHC ligand and were then purified by dialysis and characterized by TEM, high‐resolution TEM, and spectroscopic techniques. Solid‐state NMR studies showed coordination of the carbene ligands to the nanoparticle surface and allowed the determination of a ¹³C–¹⁹⁵Pt coupling constant for the first time in a nanosystem (940 Hz). Additionally, in one case a novel structure was formed in which platinum(II) NHC complexes form a second coordination sphere around the nanoparticle.     

New Route to Stabilize Ruthenium Nanoparticles with Non‐Isolable Chiral N‐Heterocyclic Carbenes

Ru nanoparticles (RuNPs) stabilized by non‐isolable chiral N‐heterocyclic carbenes (NHCs), namely SIDPhNp ((4S,5S)‐1,3‐di(naphthalen‐1‐yl)‐4,5‐diphenylimidazolidine) and SIPhOH ((S)‐3‐((1S,2R)‐2‐hydroxy‐1,2‐diphenylethyl)‐1‐((R)‐2‐hydroxy‐1,2‐diphenylethyl)‐4,5‐dihydro‐3H‐imidazoline), have been synthesized through a new procedure that does not require isolation of the free carbenes. The obtained RuNPs have been characterized by state‐of‐the‐art techniques and their surface chemistry has been investigated by FTIR and solid‐state MAS NMR upon the coordination of CO, which indicated the presence of free and reactive Ru sites. Their catalytic activity has been tested in various hydrogenation reactions involving competition between different sites, whereby interesting differences in selectivity were observed, but no enantioselectivity.     

N‐Heterocyclic Olefins as Organocatalysts for Polymerization: Preparation of Well‐Defined Poly(propylene oxide)

The metal‐free polymerization of propylene oxide (PO) using a special class of alkene—N‐heterocyclic olefins (NHOs)—as catalysts is described. Manipulation of the chemical structure of the NHO organocatalyst allows for the preparation of the poly(propylene oxide) in high yields with high turnover (TON>2000), which renders this the most active metal‐free system for the polymerization of PO reported to date. The resulting polyether displays predictable end groups, molar mass, and a low dispersity (?_M<1.09). NHOs with an unsaturated backbone are essential for polymerization to occur, while substitution at the exocyclic carbon atom has an impact on the reaction pathway and ensures the suppression of side reactions.     

CO2 and SnII Adducts of N‐Heterocyclic Carbenes as Delayed‐Action Catalysts for Polyurethane Synthesis

Catalytic rivals : Both CO₂‐protected tetrahydropyrimidin‐2‐ylidene‐based N‐heterocyclic carbenes (NHCs) and Sn^II‐1,3‐dimesitylimidazol‐2‐ylidene, as well as Sn^II‐1,3‐dimesitylimidazolin‐2‐ylidene complexes (example displayed), have been identified as truly latent catalysts for polyurethane (PUR) synthesis rivaling all existing systems both in activity and latency.

     

Di‐ and Trinuclear Gold Complexes of Diphenylphosphinoethyl‐Functionalised Imidazolium Salts and their N‐Heterocyclic Carbenes: Synthesis and Photophysical Properties

Diphenylphosphinoethyl‐functionalised imidazolium salts and their silver–carbene complexes were used to synthesise a series of di‐ and trinuclear gold complexes through ligand exchange and transmetallation, respectively. Besides a few positively charged macrocyclic compounds with different anions (both with and without activation of the carbene function), we were able to obtain neutral polynuclear complexes by varying the gold precursor. The synthesised gold complexes show a variety of photophysical properties, including bright white photoluminescence at ambient temperature.     

N‐Heterocyclic Carbenes and Imidazole‐2‐thiones as Ligands for the Gold(I)‐Catalysed Hydroamination of Phenylacetylene

Gold(I) complexes of 1‐[1‐(2,6‐dimethylphenylimino)alkyl]‐3‐(mesityl)imidazol‐2‐ylidene (C^Imine_R), 1,3‐dimesitylimidazol‐2‐ylidene (IMes) and of the corresponding thione derivatives (S^Imine_R and IMesS) were prepared and structurally characterised. The solid‐state structure of the C^Imine_R and S^Imine_R gold(I) complexes showed monodentate coordination of the ligand and a dangling imine group that could bind reversibly to the metal centre to stabilise otherwise unstable catalytic intermediates. Interestingly, reaction of C^Imine_tBu with [AuCl(SMe₂)] led to the formation of [(C^Imine_tBu)AuCl], which rearranges upon crystallisation into the unusual complex cation [(C^Imine_tBu)₂Au]⁺, with AuCl₂^? as the counterion. The activity of the gold complexes in the hydroamination of phenylacetylene with substituted anilines was tested and compared to control catalyst systems. The best catalytic performance was obtained with [(C^Imine_tBu)AuCl], with the exclusive formation of the Markovnikov addition product in excellent yield (>95 %) regardless of the substituents on aniline.