A reusable polymer‐supported copper(I) catalyst for triazole click reaction on water: An experimental and computational study

In the search for establishing a clickable copper‐catalysed (3 + 2) Huisgen azide–alkyne cycloaddition (CuAAC) reaction under strict conditions, in particular in terms of preventing the presence of copper particles/traces in reaction products and using an environmentally benign medium such as water, we describe here the synthesis of an aminomethyl polystyrene‐supported copper(I) catalyst (Cu(I)‐AMPS) and its characterization by means of Fourier transform infrared and energy‐dispersive X‐ray spectroscopies and scanning electron microscopy. Cu(I)‐AMPS was found to be highly active in the CuAAC reaction of various organic azides with alkynes affording the corresponding 1,4‐disubstituted 1,2,3‐triazoles in a regioselective manner in air at room temperature and using water as solvent. The insolubility and/or partial solubility of the organic azide and alkyne precursors as well as the heterogeneous Cu(I)‐AMPS catalytic system points to the occurrence of the cycloaddition at the organic–water interface ‘on water’ affording quantitative yields of water‐insoluble 1,2,3‐triazoles. A mechanistic study was performed using density functional theory aiming at explaining the observed reactivity and selectivity of the Cu (I)‐AMPS catalyst in CuAAC reactions.     

Reaction of Alkynes and Azides: Not Triazoles Through Copper–Acetylides but Oxazoles Through Copper–Nitrene Intermediates

Well‐defined copper(I) complexes of composition [Tpm*^,BrCu(NCMe)]BF₄ (Tpm*^,Br=tris(3,5‐dimethyl‐4‐bromo‐pyrazolyl)methane) or [Tpa^*Cu]PF₆ (Tpa^*=tris(3,5‐dimethyl‐pyrazolylmethyl)amine) catalyze the formation of 2,5‐disubstituted oxazoles from carbonyl azides and terminal alkynes in a direct manner. This process represents a novel procedure for the synthesis of this valuable heterocycle from readily available starting materials, leading exclusively to the 2,5‐isomer, attesting to a completely regioselective transformation. Experimental evidence and computational studies have allowed the proposal of a reaction mechanism based on the initial formation of a copper–acyl nitrene species, in contrast to the well‐known mechanism for the copper‐catalyzed alkyne and azide cycloaddition reactions (CuAAC) that is triggered by the formation of a copper–acetylide complex.     

On the Mechanism of Copper(I)‐Catalyzed Azide–Alkyne Cycloaddition

The copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction regiospecifically produces 1,4‐disubstituted‐1,2,3‐triazole molecules. This heterocycle formation chemistry has high tolerance to reaction conditions and substrate structures. Therefore, it has been practiced not only within, but also far beyond the area of heterocyclic chemistry. Herein, the mechanistic understanding of CuAAC is summarized, with a particular emphasis on the significance of copper/azide interactions. Our analysis concludes that the formation of the azide/copper(I) acetylide complex in the early stage of the reaction dictates the reaction rate. The subsequent triazole ring‐formation step is fast and consequently possibly kinetically invisible. Therefore, structures of substrates and copper catalysts, as well as other reaction variables that are conducive to the formation of the copper/alkyne/azide ternary complex predisposed for cycloaddition would result in highly efficient CuAAC reactions. Specifically, terminal alkynes with relatively low pK_a values and an inclination to engage in π‐backbonding with copper(I), azides with ancillary copper‐binding ligands (aka chelating azides), and copper catalysts that resist aggregation, balance redox activity with Lewis acidity, and allow for dinuclear cooperative catalysis are favored in CuAAC reactions. Brief discussions on the mechanistic aspects of internal alkyne‐involved CuAAC reactions are also included, based on the relatively limited data that are available at this point.     

Conditional Copper‐Catalyzed Azide–Alkyne Cycloaddition by Catalyst Encapsulation

Supramolecular encapsulation is known to alter chemical properties of guest molecules. We have applied this strategy of molecular encapsulation to temporally control the catalytic activity of a stable copper(I)–carbene catalyst. Encapsulation of the copper(I)–carbene catalyst by the supramolecular host cucurbit[7]uril (CB[7]) resulted in the complete inactivation of a copper‐catalyzed alkyne–azide cycloaddition (CuAAC) reaction. The addition of a chemical signal achieved the near instantaneous activation of the catalyst, by releasing the catalyst from the inhibited CB[7] catalyst complex. To broaden the scope of our on‐demand CuAAC reaction, we demonstrated the protein labeling of vinculin with the copper(I)–carbene catalyst, to inhibit its activity by encapsulation with CB[7] and to initiate labeling at any moment by adding a specific signal molecule. Ultimately, this strategy allows for temporal control over copper‐catalyzed click chemistry, on small molecules as well as protein targets.     

Intramolecular Copper(I)‐Catalyzed Interrupted Click–Acylation Domino Reaction

Acyl substituted triazoles are valuable scaffolds, but the direct synthesis of these moieties from terminal alkynes by copper catalysis remains unexplored. We report a robust, general, and efficient method using a simple CuI/2,2′‐bipyridine catalytic system. This transformation involves a copper catalyzed azide‐alkyne cycloaddition (CuAAC) followed by an intramolecular acylation onto a carbamoyl chloride. The reaction proceeds under mild conditions, tolerates several functional groups, and is readily scalable. This method represents a novel strategy towards the synthesis of complex heterocycles by a CuAAC/acylation domino process.     

Copper‐Chelating Azides for Efficient Click Conjugation Reactions in Complex Media

The concept of chelation‐assisted copper catalysis was employed for the development of new azides that display unprecedented reactivity in the copper(I)‐catalyzed azide–alkyne [3+2] cycloaddition (CuAAC) reaction. Azides that bear strong copper‐chelating moieties were synthesized; these functional groups allow the formation of azide copper complexes that react almost instantaneously with alkynes under diluted conditions. Efficient ligation occurred at low concentration and in complex media with only one equivalent of copper, which improves the biocompatibility of the CuAAC reaction. Furthermore, such a click reaction allowed the localization of a bioactive compound inside living cells by fluorescence measurements.     

A Biocompatible Heterogeneous MOF–Cu Catalyst for In Vivo Drug Synthesis in Targeted Subcellular Organelles

As a typical bioorthogonal reaction, the copper‐catalyzed azide–alkyne cycloaddition (CuAAC) has been used for drug design and synthesis. However, for localized drug synthesis, it is important to be able to determine where the CuAAC reaction occurs in living cells. In this study, we constructed a heterogeneous copper catalyst on a metal–organic framework that could preferentially accumulate in the mitochondria of living cells. Our system enabled the localized synthesis of drugs through a site‐specific CuAAC reaction in mitochondria with good biocompatibility. Importantly, the subcellular catalytic process for localized drug synthesis avoided the problems of the delivery and distribution of toxic molecules. In vivo tumor therapy experiments indicated that the localized synthesis of resveratrol‐derived drugs led to greater antitumor efficacy and minimized side effects usually associated with drug delivery and distribution.     

Modulating catalytic activity of polymer‐based cuAAC “click” reactions

The copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction is used to synthesize complex polymer architectures. In this work, we demonstrate the control of this reaction at 25 °C between polystyrene (PSTY) chains through modulating the catalytic activity by varying the combinations of copper source (i.e., Cu(I)Br or copper wire), ligand (PMDETA and/or triazole ligand), and solvent (toluene or DMF). The fastest rate of CuAAC was found using Cu(I)Br/PMDETA ligand in toluene, reaching near full conversion after 15 min at 25 °C. For the same catalysts system, DMF also gave fast rates of “click” (95% conversion in 25 min). Cu(0) wire in toluene gave a conversion of 98% after 600 min, a much higher rate than that observed for the same catalyst system used in DMF. When the PSTY had a chemically bound triazole ring close to the site of reaction, the rate of CuAAC in toluene increased significantly, 97% in 180 min at 25 °C, in agreement with our previously published results. This suggests that rapid rates can be obtained using copper wire and will have direct applications to the synthesis of compound where air, removal of copper, and reuse of the copper catalyst are required. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis,characterization and catalytic properties of tetrachlorocuprate(II) immobilized on layered double hydroxide

Readily prepared copper(II) immobilized on layered double hydroxide has been found to effectively catalyse the 1,3‐dipolar cycloaddition (CuAAC) of a variety terminal alkynes and benzyl azides generated in situ from sodium azide and benzyl halides furnishing the corresponding 1,2,3‐triazoles in excellent yields. The advantages of the protocol are short reaction time, mild reaction conditions, reusability of the catalyst and applicability to a wide range of substrates.     

Sunlight‐Driven Copper‐Catalyst Activation Applied to Photolatent Click Chemistry

The synthesis, full characterization, photoreduction properties, and catalytic activity for the copper(I)‐catalyzed alkyne‐azide cycloaddition (CuAAC) reaction of a copper(II)–DMEDA (N,N′‐dimethylethylendiamine) complex is reported. Spectroscopic studies (UV/Vis, EPR) demonstrated that under daylight illumination highly effective copper(II) to copper(I) reduction occurs in this complex. These findings are in agreement with a high photoreduction quantum yield value of 0.22 in MeOH, and a value approaching unity as determined in THF. The reduction process, which can also be conducted by irradiation at 365 nm by using a standard TLC (thin layer chromatography) lamp, is ascribed to a highly efficient photoinduced electron transfer (PET) process mediated by the benzophenone photosensitizer present in the carboxylate counterion. Having deaerated the reaction mixture, the photogenerated copper(I) species proved to be highly active for the CuAAC reaction, demonstrated by reactions conducted with low catalyst loading (0.5 mol %) on a range of clickable protected and non‐protected mono‐ and disaccharides. Once initiated, the reaction can be stopped at any time on introducing air into the reaction medium. Deoxygenation followed by irradiation restores the activity, making the copper(II)–DMEDA complex a switchable catalyst of practical value.     

In‐situ Generated and Premade 1‐Copper(I) Alkynes in Cycloadditions

The copper(I)‐catalyzed azide‐alkyne cycloaddition (CuAAC) was discovered in 2002, which has become the most remarkable example for “click chemistry” to date. In CuAAC reaction, 1‐copper(I) alkyne has been recognized to be a key intermediate. However, many contradictory experimental results for this intermediate were reported in literature. For example, only the in‐situ generated 1‐copper(I) alkyne was used, while the premade 1‐copper(I) alkyne proved to be inefficient under the standard conditions. The kinetic studies indicated that CuAAC reaction had a strict second‐order dependence on Cu(I) and the DFT studies demonstrated that 1‐copper(I) alkyne intermediate should be a dinuclear copper(I) complex. But these results were inconsistent with the structure of the premade 1‐copper(I) alkyne. Although hundreds of structurally different ligands were reported to significantly enhance the efficiency of CuAAC reaction, their functions were assigned to prevent the oxidation and the disproportionation of Cu(I) ion. Based on the investigation of the references and our works, we proposed that the in‐situ generated 1‐copper(I) alkyne in CuAAC reaction is not identical with the premade 1‐copper(I) alkyne. The ligands may play dual roles to activate the 1‐copper(I) alkyne by blocking the polymerization of the in‐situ formed 1‐copper(I) alkynes and dissociating the polymeric structures of the premade 1‐copper(I) alkynes. As a result, we first disclosed that carboxylic acids can function as such activators and a novel carboxylic acid‐catalyzed CuAAC strategy was developed, which has been proven to be the most convenient and highly efficient CuAAC method to date. Furthermore, highly efficient and regioselective methods for the syntheses of 1,4,5‐trisubstituted 1,2,3‐triazoles were developed by using the premade 1‐copper(I) alkynes as substrates, in which the novel function of the premade 1‐copper(I) alkynes as excellent dipolarophiles was first disclosed and applied. In this article, a series of works reported by our group for the in‐situ generated and the premade 1‐copper(I) alkynes in cycloadditions are reviewed.     

Copper Catalysis in Living Systems and In Situ Drug Synthesis

The copper‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction has proven to be a pivotal advance in chemical ligation strategies with applications ranging from polymer fabrication to bioconjugation. However, application in vivo has been limited by the inherent toxicity of the copper catalyst. Herein, we report the application of heterogeneous copper catalysts in azide–alkyne cycloaddition processes in biological systems ranging from cells to zebrafish, with reactions spanning from fluorophore activation to the first reported in situ generation of a triazole‐containing anticancer agent from two benign components, opening up many new avenues of exploration for CuAAC chemistry.     

Iridium‐Catalyzed Intermolecular Azide–Alkyne Cycloaddition of Internal Thioalkynes under Mild Conditions

An iridium‐catalyzed azide–alkyne cycloaddition reaction (IrAAC) of electron‐rich internal alkynes is described. It is the first efficient intermolecular AAC of internal thioalkynes. The reaction exhibits remarkable features, such as high efficiency and regioselectivity, mild reaction conditions, easy operation, and excellent compatibility with air and a broad spectrum of organic and aqueous solvents. It complements the well‐known CuAAC and RuAAC click reactions.     

Recyclable Porous Polymer‐Supported Copper Catalysts for Glaser and Huisgen 1,3‐Diolar Cycloaddition Reactions

A family of polymer‐attached phenanthrolines was prepared from solvothermal copolymerization of divinylbenzene with N‐(1,10‐phenanthroline‐5‐yl)acrylamide in different ratios. The polymer‐supported copper catalysts were obtained through typical impregnation with copper(II) salts. The polymers and supported copper catalysts have been characterized by N₂ adsortion, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and thermogravimetric analysis (TG); they exhibit a high surface area, hierarchical porosity, large pore volume, and high thermal and chemical stabilities. The copper catalyst has proved to be highly active for Glaser homocoupling of alkynes and Huisgen 1,3‐diolar cycloaddition of alkynes with benzyl azide under mild conditions at low catalyst loading. The heterogeneous copper catalyst is more active than commonly used homogeneous and nonporous polystyrene‐supported copper catalysts. In particular, the catalyst is easily recovered and can be recycled at least ten times without any obvious loss in catalytic activity. Metal leaching was prevented due to the strong binding ability of phenanthroline and products were not contaminated with copper, as determined by ICP analysis.     

An efficient synthesis of 3‐triazolyl‐2(1H)‐quinolones by CuTC‐catalyzed azide–alkyne cycloaddition reaction

A facile and efficient Cu(I)‐catalyzed azide–alkyne cycloaddition reaction for the synthesis of a series of 3‐triazolyl‐2(1H)‐quinolones 3 have been developed using 3‐azido‐quinolin‐2(1H)‐one as the coupling partner. The optimized reaction conditions involve the use of eco‐ friendly ethanol as the solvent in the presence of copper(I) thiophene‐2‐carboxylate as the catalyst, to afford good to excellent yields of 3‐triazolyl‐2(1H)‐quinolone derivatives of biological interest. Copyright © 2013 John Wiley & Sons, Ltd.     

Kinetics of bulk azide/alkyne “click” polymerization

A bulk step‐growth polymerization of multifunctional azides and alkynes through the copper (I)‐catalyzed azide‐alkyne cycloaddition (CuAAC) reaction is described. The polymerization kinetics of two systems containing different diynes, bisphenol E diyne (BE‐diyne)/bisphenol A bisazide (BA‐bisazide) and tetraethylene glycol diyne (TeEG‐diyne)/BA‐bisazide, are evaluated by differential scanning calorimetry (DSC), shear rheology, and thermogravimetric analysis. The effects of catalyst concentration on reaction kinetics are investigated in detail, as are the thermal properties (glass transition and decomposition temperatures) of the formed polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4093–4102, 2010     

Immobilization of copper ions onto α‐amidotriazole‐functionalized magnetic nanoparticles and their application in the synthesis of triazole derivatives in water

A new heterogeneous copper catalyst was synthesized by immobilization of copper ions onto magnetic nanoparticles with a new ligand based on triazole. The catalyst was characterized using scanning and transmission electron microscopies, atomic absorption and Fourier transform infrared spectroscopies, and thermogravimetric, elemental and energy‐dispersive X‐ray analyses. The results confirmed that a good level of organic groups was immobilized on the magnetic nanoparticles. Huisgen cycloaddition reaction was chosen as a model reaction for the investigation of catalyst activity under green conditions. Phenylacetylene and benzyl bromide derivatives were used for the synthesis of triazoles. The reaction proceeded with good to excellent yields for various alkynes and alkyl halides. To investigate catalyst activity for inactive alkynes, aliphatic alkynes were used in the model reaction. The corresponding triazoles were obtained in good to excellent yields and a high regioselectivity for products was obtained. The catalyst was easily separated using an external magnetic field and subsequently reused in ten reaction cycles without any loss of catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Triazolyl‐Based Molecular Gels as Ligands for Autocatalytic ‘Click’ Reactions

The catalytic performance of triazolyl‐based molecular gels was investigated in the Huisgen 1,3‐dipolar cycloaddition of alkynes and azides. Low‐molecular‐weight gelators derived from l ‐valine were synthesized and functionalized with a triazole fragment. The resultant compounds formed gels either with or without copper, in a variety of solvents of different polarity. The gelators coordinated Cu^I and exhibited a high catalytic activity in the gel phase for the model reaction between phenylacetylene and benzylazide. Additionally, the gels were able to participate in autocatalytic synthesis and the influence of small structural changes on their performance was observed.     

Preparation of Cu(OAc)2/MCM‐41 catalyst and its application in the one‐pot synthesis of 1,2,3‐triazoles in water

An efficient one‐pot synthesis of 1,2,3‐triazoles via the three‐component coupling reaction between benzyl or alkyl bromides, terminal alkynes, and sodium azide in the presence of catalytic amounts of Cu(OAc)₂/MCM‐41 catalyst has been described. This catalyst showed high catalytic activity and 1,4‐regioselectivity for the [3 + 2]Huisgen cycloaddition. This method avoids isolation and handling of organic azides, using water as a solvent, and catalyst recycling makes this synthesis a truly green procedure. © 2012 Wiley Periodicals, Inc. Heteroatom Chem 23:415–421, 2012; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.21031     

Copper iodide nanoparticles on poly(4-vinyl pyridine) as new and green catalyst for multicomponent click synthesis of 1,4-disubstituted-l,2,3-triazoles in water

Poly(4-vinyl pyridine) supported nanoparticle of copper(Ⅰ) iodide is reported as a green and recyclable catalyst for the regioselective synthesis of 1,4-disubstituted-1H-1,2,3-triazoles from benzyl halides,sodium azide and terminal alkynes in water. This catalyst can be recovered by simple filtration and recycled up to 8 consecutive runs without any loss of its efficiency.